Endur Consultant with configuration experience London, expected to be in client office 2-3 days per week. (Apply online only) per day inside IR35 Capture business problems, value drivers, and functional/non-functional requirements and translate into functionality. Assess the risks, feasibility, opportunities, and business impact. Assess and model processes, data flows, and technology to understand the current value and issues, and identify opportunities for improvement. Create / update clear documentation of requirements to align with the solution over the project lifecycle. Ensure traceability of requirements from business needs through testing and scope changes, to final solution. Interact with software suppliers, designers and developers to understand software limitations, deliver elements of system and database design, and ensure that business requirements and use cases are handled. Configure and document software and processes, using agreed standards and tools. Create acceptance criteria and validate that solutions meet business needs, through defining and coordinating testing. Create and present compelling business cases to justify solution value and establish approval, funding and prioritization. Initiate, plan, execute, monitor, and control Business Analysis activities on projects within agreed parameters of cost, time and quality. Lead stakeholder management activities and large design sessions. Lead teams to complete business analysis on projects. Configure and document software and processes. Define and coordinate testing. Mandatory skills: 5 years of hands-on experience on Endur configuration across all the modules. Endur Consultant with configuration experience London, expected to be in client office 2-3 days per week. (Apply online only) per day inside IR35 Damia Group Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept our Data Protection Policy which can be found on our website. Please note that no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and ability to perform the duties of the job. Damia Group is acting as an Employment Business in relation to this vacancy and in accordance to Conduct Regulations 2003.
29/10/2025
Contractor
Endur Consultant with configuration experience London, expected to be in client office 2-3 days per week. (Apply online only) per day inside IR35 Capture business problems, value drivers, and functional/non-functional requirements and translate into functionality. Assess the risks, feasibility, opportunities, and business impact. Assess and model processes, data flows, and technology to understand the current value and issues, and identify opportunities for improvement. Create / update clear documentation of requirements to align with the solution over the project lifecycle. Ensure traceability of requirements from business needs through testing and scope changes, to final solution. Interact with software suppliers, designers and developers to understand software limitations, deliver elements of system and database design, and ensure that business requirements and use cases are handled. Configure and document software and processes, using agreed standards and tools. Create acceptance criteria and validate that solutions meet business needs, through defining and coordinating testing. Create and present compelling business cases to justify solution value and establish approval, funding and prioritization. Initiate, plan, execute, monitor, and control Business Analysis activities on projects within agreed parameters of cost, time and quality. Lead stakeholder management activities and large design sessions. Lead teams to complete business analysis on projects. Configure and document software and processes. Define and coordinate testing. Mandatory skills: 5 years of hands-on experience on Endur configuration across all the modules. Endur Consultant with configuration experience London, expected to be in client office 2-3 days per week. (Apply online only) per day inside IR35 Damia Group Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept our Data Protection Policy which can be found on our website. Please note that no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and ability to perform the duties of the job. Damia Group is acting as an Employment Business in relation to this vacancy and in accordance to Conduct Regulations 2003.
Endur Consultant with configuration experience London, expected to be in client office 2-3 days per week. £800 - 900 per day inside IR35 Capture business problems, value drivers, and functional/non-functional requirements and translate into functionality. Assess the risks, feasibility, opportunities, and business impact. Assess and model processes, data flows, and technology to understand the current value and issues, and identify opportunities for improvement. Create/update clear documentation of requirements to align with the solution over the project life cycle. Ensure traceability of requirements from business needs through testing and scope changes, to final solution. Interact with software suppliers, designers and developers to understand software limitations, deliver elements of system and database design, and ensure that business requirements and use cases are handled. Configure and document software and processes, using agreed standards and tools. Create acceptance criteria and validate that solutions meet business needs, through defining and coordinating testing. Create and present compelling business cases to justify solution value and establish approval, funding and prioritization. Initiate, plan, execute, monitor, and control Business Analysis activities on projects within agreed parameters of cost, time and quality. Lead stakeholder management activities and large design sessions. Lead teams to complete business analysis on projects. Configure and document software and processes. Define and coordinate testing. Mandatory skills: 5 years of hands-on experience on Endur configuration across all the modules. Endur Consultant with configuration experience London, expected to be in client office 2-3 days per week. £800 - 900 per day inside IR35 Damia Group Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept our Data Protection Policy which can be found on our website. Please note that no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and ability to perform the duties of the job. Damia Group is acting as an Employment Business in relation to this vacancy and in accordance to Conduct Regulations 2003.
29/10/2025
Contractor
Endur Consultant with configuration experience London, expected to be in client office 2-3 days per week. £800 - 900 per day inside IR35 Capture business problems, value drivers, and functional/non-functional requirements and translate into functionality. Assess the risks, feasibility, opportunities, and business impact. Assess and model processes, data flows, and technology to understand the current value and issues, and identify opportunities for improvement. Create/update clear documentation of requirements to align with the solution over the project life cycle. Ensure traceability of requirements from business needs through testing and scope changes, to final solution. Interact with software suppliers, designers and developers to understand software limitations, deliver elements of system and database design, and ensure that business requirements and use cases are handled. Configure and document software and processes, using agreed standards and tools. Create acceptance criteria and validate that solutions meet business needs, through defining and coordinating testing. Create and present compelling business cases to justify solution value and establish approval, funding and prioritization. Initiate, plan, execute, monitor, and control Business Analysis activities on projects within agreed parameters of cost, time and quality. Lead stakeholder management activities and large design sessions. Lead teams to complete business analysis on projects. Configure and document software and processes. Define and coordinate testing. Mandatory skills: 5 years of hands-on experience on Endur configuration across all the modules. Endur Consultant with configuration experience London, expected to be in client office 2-3 days per week. £800 - 900 per day inside IR35 Damia Group Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept our Data Protection Policy which can be found on our website. Please note that no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and ability to perform the duties of the job. Damia Group is acting as an Employment Business in relation to this vacancy and in accordance to Conduct Regulations 2003.
Service Designers - mainly remote - government sector - 3 months, extending to 12 months - £386 Skills/experience Solid service design experience ideally in a professional agency, consultancy and/or client-side experience in delivering, influencing, shaping direction of creating best in class digital and non-digital Products and Services A real breadth in your strategic design and technical expertise - from research techniques to workshop facilitation to service design thinking with the ability to understand technical constraints and processes A strong portfolio that includes a collection of real-life product examples and case studies that show your capability in design thinking with end-to-end services design practices Strong knowledge and proven practical execution of Customer Centric Design Principles Experience in planning and conducting user research, usability testing, interpret feedback and incorporate into future iterations Experience in designing, service design blueprints, customer journey and empathy mapping Experience in facilitation of Design Workshops with a variety of stake holders at all levels of an organisation Proven experience practice knowledge working in Agile Projects from user stories and backlog management to acceptance criteria Proficiency with design tools such as: Figma, Sketch, Adobe XD, inVision Studio, Zeplin, Axure RP. Solid understanding of usability and accessibility standards including Web Content Accessibility Guidelines (WCAG) & ISO 9241 Work closely with other designers, commercial and technical teams to execute a balanced approach to delivery. Where required can manage a team(s) and mentor as appropriate. Knowledge of GDS standards Role Plan and execute co-creation workshops with stakeholders to propose the most viable solution for a given problem. Apply knowledge in human factors, ethnography, and the user-centred design process to product Take account of any pre-construction information provided by the client (and principal designer, if one is involved) Design the User Journey Map so we can identify pain points and issues that need to be addressed in a given service. Design the Service Blueprint and prepare it to be presented and delivered to the client. Take steps to reduce or control any risks that cannot be eliminated. Support the learning and development of less experienced and trainee Service designer within the team Thrive working in an agile environment, using your own creativity, resourcefulness and initiative to maximise the quality of service design and its impact on the service development Be visible within the team and be able to engage, build trust and energise a team culture that is responsive to the service design
29/10/2025
Contractor
Service Designers - mainly remote - government sector - 3 months, extending to 12 months - £386 Skills/experience Solid service design experience ideally in a professional agency, consultancy and/or client-side experience in delivering, influencing, shaping direction of creating best in class digital and non-digital Products and Services A real breadth in your strategic design and technical expertise - from research techniques to workshop facilitation to service design thinking with the ability to understand technical constraints and processes A strong portfolio that includes a collection of real-life product examples and case studies that show your capability in design thinking with end-to-end services design practices Strong knowledge and proven practical execution of Customer Centric Design Principles Experience in planning and conducting user research, usability testing, interpret feedback and incorporate into future iterations Experience in designing, service design blueprints, customer journey and empathy mapping Experience in facilitation of Design Workshops with a variety of stake holders at all levels of an organisation Proven experience practice knowledge working in Agile Projects from user stories and backlog management to acceptance criteria Proficiency with design tools such as: Figma, Sketch, Adobe XD, inVision Studio, Zeplin, Axure RP. Solid understanding of usability and accessibility standards including Web Content Accessibility Guidelines (WCAG) & ISO 9241 Work closely with other designers, commercial and technical teams to execute a balanced approach to delivery. Where required can manage a team(s) and mentor as appropriate. Knowledge of GDS standards Role Plan and execute co-creation workshops with stakeholders to propose the most viable solution for a given problem. Apply knowledge in human factors, ethnography, and the user-centred design process to product Take account of any pre-construction information provided by the client (and principal designer, if one is involved) Design the User Journey Map so we can identify pain points and issues that need to be addressed in a given service. Design the Service Blueprint and prepare it to be presented and delivered to the client. Take steps to reduce or control any risks that cannot be eliminated. Support the learning and development of less experienced and trainee Service designer within the team Thrive working in an agile environment, using your own creativity, resourcefulness and initiative to maximise the quality of service design and its impact on the service development Be visible within the team and be able to engage, build trust and energise a team culture that is responsive to the service design
Graphic Designer Location: Head Office, Enfield, EN3 7FJ Department: Department of Digital Design & Information Technology Galldris Group An exciting opportunity is available to join our Head Office Team at Galldris Services Ltd. We are seeking a talented and versatile Graphic Designer to join our growing team in the construction industry. This role is ideal for a creative professional who enjoys a paced work environment and who is capable of meeting required deadlines. The role involves a mix of practical creative and graphical design work, digital design, print design, production and technical tasks, and the management of project assets. You will play a key role in shaping our visual identity, supporting other departments, and communicating our values, with compelling, own-brand design solutions. Please note that there is no hybrid working due to the nature of the role, and it will be office-based 5 days a week. As a Graphic Designer, your responsibilities will include: Creative & Conceptual Work Develop visual brand concepts of designs. Design logos, icons, and custom illustrations Select typography and colour palettes aligned with brand identity Digital Design Design and update websites, and various landing pages. Design mobile interfaces for inhouse developed applications Create social media graphics and digital ads. Design infographics, and digital brochures. Design and Update company digital presentations Print Design Design brochures, flyers, posters, and business cards. Develop signage, and branded merchandise. Prepare print-ready files and liaise with external printing houses Proof and revise materials for accuracy and quality. Package and arrange delivery of printed materials Production & Technical Tasks Retouch and optimise images for SM, Web and Print. Export and send assets in various formats when required Manage file organization. Create reusable form templates. Maintain design systems. Ensure accessibility and brand compliance across all outputs Collaboration & Communication Work closely with marketing, project managers, and external clients Present design concepts and gather feedback from involved parties. Collaborate with software developers. Participate in creative reviews and design critiques Project & Asset Management Manage digital asset libraries and version control. Track project timelines and meet deadlines Use project management tools (e.g., Trello, Asana). Archive completed projects. Prepare project case studies Required Skills & Tools Proficiency in Adobe Creative Cloud, including: Photoshop Illustrator InDesign After Effects XD / Figma (for UI/UX) Strong understanding of layout, typography, and colour theory. Experience with both print and digital production processes. Familiarity with web design principles and responsive design. Basic knowledge of HTML/CSS, Java is a plus. Proficient in the use of and Knowledge of WordPress Understanding how websites are hosted and managed. Understanding of SEO principles. Comfortable command of the English Language. Knowledge of a 3D software such as Blender Soft Skills Strong communication and presentation skills. Excellent time management and ability to multitask Design Problem solving ability. Attention to detail and commitment to quality. Adaptability and openness to feedback. Have a problem-solving mindset and creative thinking. Be team-oriented with a collaborative spirit Ideal Interests Interest in the built environment Photography and drone technology. Interest in branding, storytelling, and visual communication. Curiosity about design trends, technology, and innovation. Enjoyment of hands-on creative work and continuous learning Qualifications / Education Master s or Bachelor s degree in Graphic Design, Visual Communication, and Digital Media, Equivalent experience or certifications in design and multimedia Professional Experience Hands-on experience in graphic design roles (agency or in-house). Proven experience working across print and digital platforms Experience collaborating with cross-functional teams (e.g., commercial, marketing, IT, developers, site personnel). Exposure to construction, architecture, engineering, or like sectors is a plus. Experience managing multiple projects and meeting deadlines in a fast-paced environment Interested applicants must be eligible to work legally in the UK. Should you feel you have what it takes to be successful in this role then we would love to hear from you. Employee referral scheme - refer a friend or family member to work for Galldris. Galldris is an Equal Opportunities employer and does not discriminate against any protected characteristic. Please note: We are not using recruitment agencies for this role. In the event of speculative CV submissions, no fees will be applicable.
23/10/2025
Full time
Graphic Designer Location: Head Office, Enfield, EN3 7FJ Department: Department of Digital Design & Information Technology Galldris Group An exciting opportunity is available to join our Head Office Team at Galldris Services Ltd. We are seeking a talented and versatile Graphic Designer to join our growing team in the construction industry. This role is ideal for a creative professional who enjoys a paced work environment and who is capable of meeting required deadlines. The role involves a mix of practical creative and graphical design work, digital design, print design, production and technical tasks, and the management of project assets. You will play a key role in shaping our visual identity, supporting other departments, and communicating our values, with compelling, own-brand design solutions. Please note that there is no hybrid working due to the nature of the role, and it will be office-based 5 days a week. As a Graphic Designer, your responsibilities will include: Creative & Conceptual Work Develop visual brand concepts of designs. Design logos, icons, and custom illustrations Select typography and colour palettes aligned with brand identity Digital Design Design and update websites, and various landing pages. Design mobile interfaces for inhouse developed applications Create social media graphics and digital ads. Design infographics, and digital brochures. Design and Update company digital presentations Print Design Design brochures, flyers, posters, and business cards. Develop signage, and branded merchandise. Prepare print-ready files and liaise with external printing houses Proof and revise materials for accuracy and quality. Package and arrange delivery of printed materials Production & Technical Tasks Retouch and optimise images for SM, Web and Print. Export and send assets in various formats when required Manage file organization. Create reusable form templates. Maintain design systems. Ensure accessibility and brand compliance across all outputs Collaboration & Communication Work closely with marketing, project managers, and external clients Present design concepts and gather feedback from involved parties. Collaborate with software developers. Participate in creative reviews and design critiques Project & Asset Management Manage digital asset libraries and version control. Track project timelines and meet deadlines Use project management tools (e.g., Trello, Asana). Archive completed projects. Prepare project case studies Required Skills & Tools Proficiency in Adobe Creative Cloud, including: Photoshop Illustrator InDesign After Effects XD / Figma (for UI/UX) Strong understanding of layout, typography, and colour theory. Experience with both print and digital production processes. Familiarity with web design principles and responsive design. Basic knowledge of HTML/CSS, Java is a plus. Proficient in the use of and Knowledge of WordPress Understanding how websites are hosted and managed. Understanding of SEO principles. Comfortable command of the English Language. Knowledge of a 3D software such as Blender Soft Skills Strong communication and presentation skills. Excellent time management and ability to multitask Design Problem solving ability. Attention to detail and commitment to quality. Adaptability and openness to feedback. Have a problem-solving mindset and creative thinking. Be team-oriented with a collaborative spirit Ideal Interests Interest in the built environment Photography and drone technology. Interest in branding, storytelling, and visual communication. Curiosity about design trends, technology, and innovation. Enjoyment of hands-on creative work and continuous learning Qualifications / Education Master s or Bachelor s degree in Graphic Design, Visual Communication, and Digital Media, Equivalent experience or certifications in design and multimedia Professional Experience Hands-on experience in graphic design roles (agency or in-house). Proven experience working across print and digital platforms Experience collaborating with cross-functional teams (e.g., commercial, marketing, IT, developers, site personnel). Exposure to construction, architecture, engineering, or like sectors is a plus. Experience managing multiple projects and meeting deadlines in a fast-paced environment Interested applicants must be eligible to work legally in the UK. Should you feel you have what it takes to be successful in this role then we would love to hear from you. Employee referral scheme - refer a friend or family member to work for Galldris. Galldris is an Equal Opportunities employer and does not discriminate against any protected characteristic. Please note: We are not using recruitment agencies for this role. In the event of speculative CV submissions, no fees will be applicable.
Job Description Dynamics Engineer- Submarines Full Time Derby / onsite We are currently looking for talented Engineers to join the Dynamics Group in Rolls-Royce Submarines. As an engineer in the Dynamics Group, you will be engaging primarily in structural assessments relating to impact, seismic, shock and vibration scenarios for all components within the steam raising plant. We also assess a wide range of on-board and shore-based plant support equipment and radioactive material transport containers. The work is interesting and varied; there will be situations in which you will be relied upon to respond rapidly to emergent challenges, providing a vital and valued service to the Submarines enterprise. Why Rolls-Royce? Rolls-Royce Submarines is a leader in propulsion systems design and development for the Royal Navy's nuclear submarine fleet. They are the sole provider and technical authority for the Nuclear Steam Raising Plant, managing all aspects of plant design, safety, manufacture, performance and through-life support. Powering the submarines of today and building solutions for tomorrow has never been more important. We're a leader in propulsion system design and development for the Royal Navy's nuclear submarine fleet and the sole provider and technical authority. What we offer: Join us and we'll provide an environment where you can be yourself. An inclusive, digital-first culture that invests in you, gives you a platform for continuous learning, and access to an incredible breadth and depth of opportunities to grow your career. We offer excellent development, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. What you'll be doing: In this role you will: Undertaking a broad range of mechanical assessments, including linear, non-linear and dynamic finite element analyses. Making use of traditional hand calculation methods, commercial finite element codes and bespoke analysis codes. Using assessment work to develop and substantiate component designs, inform through-life management and, in many cases, pursue regulatory approval for current class, in-build and future class submarines. Development and implementation of methodologies to assess components, along with the definition of testing programmes to underwrite those methods. Relaying the method and outcome of assessments, clearly and efficiently, to a range of audiences at all seniorities within Rolls-Royce, industry partners and customer organisations. Who we're looking for: At Rolls-Royce we embrace agility, are bold, pursue collaboration and seek simplicity in everything we do. These principles form our values and behaviours and are an essential component of our assessment process and are fundamental qualities that we seek for all roles. Essential: Qualified to degree level, or with equivalent experience, in mechanical engineering, physics or mathematics. Able to prioritise tasks and work effectively on multiple projects at the same time. Demonstrate interest in dynamic analysis and test. Desirable: Good all-round knowledge of the fundamental failure mechanisms and the methods used to assess against them. Practical experience of using finite element methods for structural component assessment, along with experience of providing support to manufacturing engineers, designers and safety case authors. Good working knowledge of dynamics and non-linear events. Experience generating and working with finite element models, using industry standard tools such as LS-DYNA, Abaqus, ANSYS, HyperMesh and the Oasys suite. Experience of working in an industry where safety is a priority and in which components are justified to safety cases and/or design code requirements. Experience of working as part of a multi-disciplinary design team; particularly where concurrent engineering methods have been used. Membership, or Associate Membership, of a relevant professional institution and working toward chartership. We're an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives. And the more perspectives we have, the more successful we'll be. By building a culture of respect and appreciation, we give everyone who works here the opportunity to realise their full potential. You can learn more about our global Inclusion strategy at Our people Rolls-Royce To work for Rolls-Royce Submarines you need to hold a Security Check (SC) clearance without any caveats to that clearance. Rolls-Royce will support the application for Security Clearance if you don't currently already have this in place. Due to the nature of work the business conducts and the protection of certain assets, you must hold a UK nationality. Any dual nationals will require additional scrutiny and background checks prior to commencing work with RRSL. Job Category Mechanical Systems Posting Date 19 Jun 2025; 00:06 Posting End Date PandoLogic.
23/10/2025
Full time
Job Description Dynamics Engineer- Submarines Full Time Derby / onsite We are currently looking for talented Engineers to join the Dynamics Group in Rolls-Royce Submarines. As an engineer in the Dynamics Group, you will be engaging primarily in structural assessments relating to impact, seismic, shock and vibration scenarios for all components within the steam raising plant. We also assess a wide range of on-board and shore-based plant support equipment and radioactive material transport containers. The work is interesting and varied; there will be situations in which you will be relied upon to respond rapidly to emergent challenges, providing a vital and valued service to the Submarines enterprise. Why Rolls-Royce? Rolls-Royce Submarines is a leader in propulsion systems design and development for the Royal Navy's nuclear submarine fleet. They are the sole provider and technical authority for the Nuclear Steam Raising Plant, managing all aspects of plant design, safety, manufacture, performance and through-life support. Powering the submarines of today and building solutions for tomorrow has never been more important. We're a leader in propulsion system design and development for the Royal Navy's nuclear submarine fleet and the sole provider and technical authority. What we offer: Join us and we'll provide an environment where you can be yourself. An inclusive, digital-first culture that invests in you, gives you a platform for continuous learning, and access to an incredible breadth and depth of opportunities to grow your career. We offer excellent development, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. What you'll be doing: In this role you will: Undertaking a broad range of mechanical assessments, including linear, non-linear and dynamic finite element analyses. Making use of traditional hand calculation methods, commercial finite element codes and bespoke analysis codes. Using assessment work to develop and substantiate component designs, inform through-life management and, in many cases, pursue regulatory approval for current class, in-build and future class submarines. Development and implementation of methodologies to assess components, along with the definition of testing programmes to underwrite those methods. Relaying the method and outcome of assessments, clearly and efficiently, to a range of audiences at all seniorities within Rolls-Royce, industry partners and customer organisations. Who we're looking for: At Rolls-Royce we embrace agility, are bold, pursue collaboration and seek simplicity in everything we do. These principles form our values and behaviours and are an essential component of our assessment process and are fundamental qualities that we seek for all roles. Essential: Qualified to degree level, or with equivalent experience, in mechanical engineering, physics or mathematics. Able to prioritise tasks and work effectively on multiple projects at the same time. Demonstrate interest in dynamic analysis and test. Desirable: Good all-round knowledge of the fundamental failure mechanisms and the methods used to assess against them. Practical experience of using finite element methods for structural component assessment, along with experience of providing support to manufacturing engineers, designers and safety case authors. Good working knowledge of dynamics and non-linear events. Experience generating and working with finite element models, using industry standard tools such as LS-DYNA, Abaqus, ANSYS, HyperMesh and the Oasys suite. Experience of working in an industry where safety is a priority and in which components are justified to safety cases and/or design code requirements. Experience of working as part of a multi-disciplinary design team; particularly where concurrent engineering methods have been used. Membership, or Associate Membership, of a relevant professional institution and working toward chartership. We're an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives. And the more perspectives we have, the more successful we'll be. By building a culture of respect and appreciation, we give everyone who works here the opportunity to realise their full potential. You can learn more about our global Inclusion strategy at Our people Rolls-Royce To work for Rolls-Royce Submarines you need to hold a Security Check (SC) clearance without any caveats to that clearance. Rolls-Royce will support the application for Security Clearance if you don't currently already have this in place. Due to the nature of work the business conducts and the protection of certain assets, you must hold a UK nationality. Any dual nationals will require additional scrutiny and background checks prior to commencing work with RRSL. Job Category Mechanical Systems Posting Date 19 Jun 2025; 00:06 Posting End Date PandoLogic.
Java Engineer • Salary to £60k + Company Options Scheme • Hybrid working between your home, their offices (London Vauxhall) & client sites. NB: Please only apply if you are eligible (have resided in the UK for the past 5 years) and prepared to go through UK SC Security Clearance This company is a Workflow & AI Orchestration Specialist. They're on a mission to modernise how public sector organisations manage casework, derive insight from data and deliver citizen services. They're growing fast and looking for bright, dynamic people to help build their business. Role They're looking for a Java Engineer to join their implementation team. You'll work across Camunda BPMN/DMN process automation, API integration, and microservice orchestration - helping their public-sector clients build secure, scalable, and resilient digital services. You'll collaborate with solution architects, business analysts, and designers to translate workflows into elegant, maintainable code. You'll play a key part in defining technical standards, optimising runtime performance, and mentoring less- experienced engineers in workflow-centric delivery. This is an ideal role for someone who enjoys solving complex process problems through clean code, automation, and modern engineering practices. The role involves visiting client sites; the company will cover travel expenses. Frequency is uncertain but candidates should be comfortable with that being 2-3 days per week. Client sites could be anywhere but will most likely be in & around London. Responsibilities Design, develop, and deploy Camunda-based process and decision automation solutions Implement and integrate Java-based microservices, APIs, and connectors within orchestration flows Translate BPMN and DMN models into executable workflows and reusable components Collaborate closely with analysts and service designers to refine and iterate business processes Develop and maintain automated test suites, CI/CD pipelines, and containerised deployments Optimise Camunda engine performance and monitor workflow metrics for production environments Participate in code reviews, peer testing, and technical design discussions Contribute to their internal best-practice frameworks and automation accelerators Essential Eligible (have resided in the UK for the past 5 years) and prepared to go through UK SC Security Clearance Strong experience in Java software engineering and object-oriented design Strong Spring (Boot) experience Experience with REST APIs, and microservice architectures Knowledge of Docker and Kubernetes for containerisation and orchestration Proficiency in Git, CI/CD pipelines, and automated testing frameworks Understanding of event-driven design and message brokers (e.g. Kafka, RabbitMQ) Good knowledge of security, authentication, and integration patterns for enterprise systems Experience working in agile teams within digital transformation or automation programmes A willingness to learn BPMN and Camunda tooling Some exposure to process automation or microservice orchestration Desirable Experience with Camunda 8 (Zeebe) clusters and Operate/Tasklist components Experience implementing solutions using Camunda 7 or 8 (BPMN/DMN) Familiarity with Camunda connectors, external task workers, and scripting extensions Exposure to cloud platforms (AWS, Azure, GCP) and infrastructure-as-code (Terraform, Helm) Experience integrating process automation with case-management or service-orchestration platforms Understanding of agentic AI capabilities and how they can complement workflow automation Experience mentoring developers or contributing to open-source Camunda extensions Already holding UK security clearance (SC, DV, eDV) What They Offer A company option scheme gives their employees a stake in the organisation they're building Meaningful missions. Tackle high-impact public-sector problems that improve services millions rely on. Hybrid working, flexible working between their London office, client offices and your home location. Outputs over optics. They focus on what gets delivered, not hours online. Working shoulder-to-shoulder with founders. Learn from experienced practitioners in a nurturing, hands-on environment. Shape their organisation. your fingerprints will be on their company as it grows. Autonomy by default. They empower their people to do what's needed. Sociable, low-ego, dynamic engagements. No big-firm stiffness or needless bureaucracy. Professional Development. They invest in their people through training and certifications. Other Stuff NB: Please only apply if you are eligible (have resided in the UK for the past 5 years) and prepared to go through UK SC Security Clearance NB: for non-UK Citizens; we cannot accept applications from anyone requiring sponsorship (now or in the future) for UK permanent employment status. If you are utilising a work visa this must allow you to work in the UK unrestricted for at least the next 5 years. Profile 29 recruitment
22/10/2025
Full time
Java Engineer • Salary to £60k + Company Options Scheme • Hybrid working between your home, their offices (London Vauxhall) & client sites. NB: Please only apply if you are eligible (have resided in the UK for the past 5 years) and prepared to go through UK SC Security Clearance This company is a Workflow & AI Orchestration Specialist. They're on a mission to modernise how public sector organisations manage casework, derive insight from data and deliver citizen services. They're growing fast and looking for bright, dynamic people to help build their business. Role They're looking for a Java Engineer to join their implementation team. You'll work across Camunda BPMN/DMN process automation, API integration, and microservice orchestration - helping their public-sector clients build secure, scalable, and resilient digital services. You'll collaborate with solution architects, business analysts, and designers to translate workflows into elegant, maintainable code. You'll play a key part in defining technical standards, optimising runtime performance, and mentoring less- experienced engineers in workflow-centric delivery. This is an ideal role for someone who enjoys solving complex process problems through clean code, automation, and modern engineering practices. The role involves visiting client sites; the company will cover travel expenses. Frequency is uncertain but candidates should be comfortable with that being 2-3 days per week. Client sites could be anywhere but will most likely be in & around London. Responsibilities Design, develop, and deploy Camunda-based process and decision automation solutions Implement and integrate Java-based microservices, APIs, and connectors within orchestration flows Translate BPMN and DMN models into executable workflows and reusable components Collaborate closely with analysts and service designers to refine and iterate business processes Develop and maintain automated test suites, CI/CD pipelines, and containerised deployments Optimise Camunda engine performance and monitor workflow metrics for production environments Participate in code reviews, peer testing, and technical design discussions Contribute to their internal best-practice frameworks and automation accelerators Essential Eligible (have resided in the UK for the past 5 years) and prepared to go through UK SC Security Clearance Strong experience in Java software engineering and object-oriented design Strong Spring (Boot) experience Experience with REST APIs, and microservice architectures Knowledge of Docker and Kubernetes for containerisation and orchestration Proficiency in Git, CI/CD pipelines, and automated testing frameworks Understanding of event-driven design and message brokers (e.g. Kafka, RabbitMQ) Good knowledge of security, authentication, and integration patterns for enterprise systems Experience working in agile teams within digital transformation or automation programmes A willingness to learn BPMN and Camunda tooling Some exposure to process automation or microservice orchestration Desirable Experience with Camunda 8 (Zeebe) clusters and Operate/Tasklist components Experience implementing solutions using Camunda 7 or 8 (BPMN/DMN) Familiarity with Camunda connectors, external task workers, and scripting extensions Exposure to cloud platforms (AWS, Azure, GCP) and infrastructure-as-code (Terraform, Helm) Experience integrating process automation with case-management or service-orchestration platforms Understanding of agentic AI capabilities and how they can complement workflow automation Experience mentoring developers or contributing to open-source Camunda extensions Already holding UK security clearance (SC, DV, eDV) What They Offer A company option scheme gives their employees a stake in the organisation they're building Meaningful missions. Tackle high-impact public-sector problems that improve services millions rely on. Hybrid working, flexible working between their London office, client offices and your home location. Outputs over optics. They focus on what gets delivered, not hours online. Working shoulder-to-shoulder with founders. Learn from experienced practitioners in a nurturing, hands-on environment. Shape their organisation. your fingerprints will be on their company as it grows. Autonomy by default. They empower their people to do what's needed. Sociable, low-ego, dynamic engagements. No big-firm stiffness or needless bureaucracy. Professional Development. They invest in their people through training and certifications. Other Stuff NB: Please only apply if you are eligible (have resided in the UK for the past 5 years) and prepared to go through UK SC Security Clearance NB: for non-UK Citizens; we cannot accept applications from anyone requiring sponsorship (now or in the future) for UK permanent employment status. If you are utilising a work visa this must allow you to work in the UK unrestricted for at least the next 5 years. Profile 29 recruitment
Java / Camunda Engineer Salary to £60k + Company Options Scheme Hybrid working between your home, their offices (London Vauxhall) & client sites. NB: Please only apply if you are eligible (have resided in the UK for the past 5 years) and prepared to go through UK SC Security Clearance This company is a Workflow & AI Orchestration Specialist. They're on a mission to modernise how public sector organisations manage casework, derive insight from data and deliver citizen services. They operate across two pillars: 1) Advise and Implement to provide end to end technology solutions that integrate cutting edge orchestration and 2) agentic AI capabilities. They're growing fast and looking for bright, dynamic people to help build their business. Role They're looking for a Java Camunda Engineer to join their implementation team. You'll work across Camunda BPMN/DMN process automation, API integration, and microservice orchestration - helping their public-sector clients build secure, scalable, and resilient digital services. You'll collaborate with solution architects, business analysts, and designers to translate workflows into elegant, maintainable code. You'll play a key part in defining technical standards, optimising runtime performance, and mentoring less- experienced engineers in workflow-centric delivery. This is an ideal role for someone who enjoys solving complex process problems through clean code, automation, and modern engineering practices. The role involves visiting client sites; the company will cover travel expenses. Frequency is uncertain but candidates should be comfortable with that being 2-3 days per week. Client sites could be anywhere but will most likely be in & around London. Responsibilities Design, develop, and deploy Camunda-based process and decision automation solutions Implement and integrate Java-based microservices, APIs, and connectors within orchestration flows Translate BPMN and DMN models into executable workflows and reusable components Collaborate closely with analysts and service designers to refine and iterate business processes Develop and maintain automated test suites, CI/CD pipelines, and containerised deployments Optimise Camunda engine performance and monitor workflow metrics for production environments Participate in code reviews, peer testing, and technical design discussions Contribute to their internal best-practice frameworks and automation accelerators Essential Eligible (have resided in the UK for the past 5 years) and prepared to go through UK SC Security Clearance Experience in Java software engineering and object-oriented design Hands-on experience implementing solutions using Camunda 7 or 8 (BPMN/DMN) Familiarity with Spring Boot, REST APIs, and microservice architectures Knowledge of Docker and Kubernetes for containerisation and orchestration Proficiency in Git, CI/CD pipelines, and automated testing frameworks Understanding of event-driven design and message brokers (e.g. Kafka, RabbitMQ) Good knowledge of security, authentication, and integration patterns for enterprise systems Experience working in agile teams within digital transformation or automation programmes Desirable Experience with Camunda 8 (Zeebe) clusters and Operate/Tasklist components Familiarity with Camunda connectors, external task workers, and scripting extensions Exposure to cloud platforms (AWS, Azure, GCP) and infrastructure-as-code (Terraform, Helm) Experience integrating process automation with case-management or service-orchestration platforms Understanding of agentic AI capabilities and how they can complement workflow automation Experience mentoring developers or contributing to open-source Camunda extensions Already holding UK security clearance (SC, DV, eDV) What They Offer A company option scheme gives their employees a stake in the organisation they're building Meaningful missions. Tackle high-impact public-sector problems that improve services millions rely on. Hybrid Working, flexible working between their London office, client offices and your home location. Outputs over optics. They focus on what gets delivered, not hours online. Work shoulder-to-shoulder with founders. Learn from experienced practitioners in a nurturing, hands-on environment. Shape their organisation. your fingerprints will be on their company as it grows. Autonomy by default. They empower their people to do what's needed. Sociable, low-ego, dynamic engagements. No big-firm stiffness or needless bureaucracy. Professional Development. They invest in their people through training and certifications. Other Stuff NB: Please only apply if you are eligible (have resided in the UK for the past 5 years) and prepared to go through UK SC Security Clearance NB: for non-UK Citizens; we cannot accept applications from anyone requiring sponsorship (now or in the future) for UK permanent employment status. If you are utilising a work visa this must allow you to work in the UK unrestricted for at least the next 5 years. Profile 29 recruitment
21/10/2025
Full time
Java / Camunda Engineer Salary to £60k + Company Options Scheme Hybrid working between your home, their offices (London Vauxhall) & client sites. NB: Please only apply if you are eligible (have resided in the UK for the past 5 years) and prepared to go through UK SC Security Clearance This company is a Workflow & AI Orchestration Specialist. They're on a mission to modernise how public sector organisations manage casework, derive insight from data and deliver citizen services. They operate across two pillars: 1) Advise and Implement to provide end to end technology solutions that integrate cutting edge orchestration and 2) agentic AI capabilities. They're growing fast and looking for bright, dynamic people to help build their business. Role They're looking for a Java Camunda Engineer to join their implementation team. You'll work across Camunda BPMN/DMN process automation, API integration, and microservice orchestration - helping their public-sector clients build secure, scalable, and resilient digital services. You'll collaborate with solution architects, business analysts, and designers to translate workflows into elegant, maintainable code. You'll play a key part in defining technical standards, optimising runtime performance, and mentoring less- experienced engineers in workflow-centric delivery. This is an ideal role for someone who enjoys solving complex process problems through clean code, automation, and modern engineering practices. The role involves visiting client sites; the company will cover travel expenses. Frequency is uncertain but candidates should be comfortable with that being 2-3 days per week. Client sites could be anywhere but will most likely be in & around London. Responsibilities Design, develop, and deploy Camunda-based process and decision automation solutions Implement and integrate Java-based microservices, APIs, and connectors within orchestration flows Translate BPMN and DMN models into executable workflows and reusable components Collaborate closely with analysts and service designers to refine and iterate business processes Develop and maintain automated test suites, CI/CD pipelines, and containerised deployments Optimise Camunda engine performance and monitor workflow metrics for production environments Participate in code reviews, peer testing, and technical design discussions Contribute to their internal best-practice frameworks and automation accelerators Essential Eligible (have resided in the UK for the past 5 years) and prepared to go through UK SC Security Clearance Experience in Java software engineering and object-oriented design Hands-on experience implementing solutions using Camunda 7 or 8 (BPMN/DMN) Familiarity with Spring Boot, REST APIs, and microservice architectures Knowledge of Docker and Kubernetes for containerisation and orchestration Proficiency in Git, CI/CD pipelines, and automated testing frameworks Understanding of event-driven design and message brokers (e.g. Kafka, RabbitMQ) Good knowledge of security, authentication, and integration patterns for enterprise systems Experience working in agile teams within digital transformation or automation programmes Desirable Experience with Camunda 8 (Zeebe) clusters and Operate/Tasklist components Familiarity with Camunda connectors, external task workers, and scripting extensions Exposure to cloud platforms (AWS, Azure, GCP) and infrastructure-as-code (Terraform, Helm) Experience integrating process automation with case-management or service-orchestration platforms Understanding of agentic AI capabilities and how they can complement workflow automation Experience mentoring developers or contributing to open-source Camunda extensions Already holding UK security clearance (SC, DV, eDV) What They Offer A company option scheme gives their employees a stake in the organisation they're building Meaningful missions. Tackle high-impact public-sector problems that improve services millions rely on. Hybrid Working, flexible working between their London office, client offices and your home location. Outputs over optics. They focus on what gets delivered, not hours online. Work shoulder-to-shoulder with founders. Learn from experienced practitioners in a nurturing, hands-on environment. Shape their organisation. your fingerprints will be on their company as it grows. Autonomy by default. They empower their people to do what's needed. Sociable, low-ego, dynamic engagements. No big-firm stiffness or needless bureaucracy. Professional Development. They invest in their people through training and certifications. Other Stuff NB: Please only apply if you are eligible (have resided in the UK for the past 5 years) and prepared to go through UK SC Security Clearance NB: for non-UK Citizens; we cannot accept applications from anyone requiring sponsorship (now or in the future) for UK permanent employment status. If you are utilising a work visa this must allow you to work in the UK unrestricted for at least the next 5 years. Profile 29 recruitment
This vibrant and expanding company are looking for a Business Analyst to work closely with the CEO in this exciting phase of their expansion. , The Company is an end-to-end digital solution organisation. They are looking for an experienced Business Analyst to join their team. In this role, you'll be the bridge between business needs and technical solutions - gathering requirements, analysing processes, and delivering actionable insights that help guide product development and business strategy. The development team are based overseas in South Africa and Thailand, with the CTO and a systems manager/UAT person being the only UK based part of the team. This role is key in that it will be a senior and key member of the development team which will include architecture and strategy decisions. Key Responsibilities: • Collaborate with stakeholders to gather and define business requirements • Translate business needs into functional and technical specifications • Analyse existing processes and recommend improvements to increase efficiency and scalability • Work closely with product managers, developers, and designers to support product development lifecycle • Be a key part of the architecture and strategic planning for the future SaaS solution. • Conduct market, competitor, and customer research to support strategic decision making • Develop and maintain data reports and dashboards for business performance monitoring • Assist in the creation of user stories, wireframes, and test cases • Support QA and UAT processes to ensure the product meets business needs • Support the business with release management and scheduling - which may be out of hours on occasions. Qualifications: • Bachelor's degree in business, Computer Science, Information Systems, or related field • 3+ years of experience as a Business Analyst, preferably in a tech or startup environment • Strong analytical and problem-solving skills • Excellent communication and stakeholder management abilities • Familiarity with Agile/Scrum methodologies • Experience with tools that we use, such as JIRA, Slack, My SQL, MIRO, Embeddable, Tevor.io, Azure Pipeline, GCP, image management software, video streaming. • Understanding of software development lifecycle and technical concepts (APIs, Array's, databases, etc.) Nice to Have: • Startup experience or entrepreneurial mindset • Knowledge of UX/UI principles • Familiarity with no-code/low-code platforms What They Offer: • Competitive salary and possible future equity options • Flexible work environment • Opportunity to make a direct impact on a growing company • Access to cutting-edge tools and technologies • Collaborative, learning-focused culture
17/10/2025
Full time
This vibrant and expanding company are looking for a Business Analyst to work closely with the CEO in this exciting phase of their expansion. , The Company is an end-to-end digital solution organisation. They are looking for an experienced Business Analyst to join their team. In this role, you'll be the bridge between business needs and technical solutions - gathering requirements, analysing processes, and delivering actionable insights that help guide product development and business strategy. The development team are based overseas in South Africa and Thailand, with the CTO and a systems manager/UAT person being the only UK based part of the team. This role is key in that it will be a senior and key member of the development team which will include architecture and strategy decisions. Key Responsibilities: • Collaborate with stakeholders to gather and define business requirements • Translate business needs into functional and technical specifications • Analyse existing processes and recommend improvements to increase efficiency and scalability • Work closely with product managers, developers, and designers to support product development lifecycle • Be a key part of the architecture and strategic planning for the future SaaS solution. • Conduct market, competitor, and customer research to support strategic decision making • Develop and maintain data reports and dashboards for business performance monitoring • Assist in the creation of user stories, wireframes, and test cases • Support QA and UAT processes to ensure the product meets business needs • Support the business with release management and scheduling - which may be out of hours on occasions. Qualifications: • Bachelor's degree in business, Computer Science, Information Systems, or related field • 3+ years of experience as a Business Analyst, preferably in a tech or startup environment • Strong analytical and problem-solving skills • Excellent communication and stakeholder management abilities • Familiarity with Agile/Scrum methodologies • Experience with tools that we use, such as JIRA, Slack, My SQL, MIRO, Embeddable, Tevor.io, Azure Pipeline, GCP, image management software, video streaming. • Understanding of software development lifecycle and technical concepts (APIs, Array's, databases, etc.) Nice to Have: • Startup experience or entrepreneurial mindset • Knowledge of UX/UI principles • Familiarity with no-code/low-code platforms What They Offer: • Competitive salary and possible future equity options • Flexible work environment • Opportunity to make a direct impact on a growing company • Access to cutting-edge tools and technologies • Collaborative, learning-focused culture
Job Description Dynamics Engineer- Submarines Full Time Derby / onsite We are currently looking for talented Engineers to join the Dynamics Group in Rolls-Royce Submarines. As an engineer in the Dynamics Group, you will be engaging primarily in structural assessments relating to impact, seismic, shock and vibration scenarios for all components within the steam raising plant. We also assess a wide range of on-board and shore-based plant support equipment and radioactive material transport containers. The work is interesting and varied; there will be situations in which you will be relied upon to respond rapidly to emergent challenges, providing a vital and valued service to the Submarines enterprise. Why Rolls-Royce? Rolls-Royce Submarines is a leader in propulsion systems design and development for the Royal Navy's nuclear submarine fleet. They are the sole provider and technical authority for the Nuclear Steam Raising Plant, managing all aspects of plant design, safety, manufacture, performance and through-life support. Powering the submarines of today and building solutions for tomorrow has never been more important. We're a leader in propulsion system design and development for the Royal Navy's nuclear submarine fleet and the sole provider and technical authority. What we offer: Join us and we'll provide an environment where you can be yourself. An inclusive, digital-first culture that invests in you, gives you a platform for continuous learning, and access to an incredible breadth and depth of opportunities to grow your career. We offer excellent development, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. What you'll be doing: In this role you will: Undertaking a broad range of mechanical assessments, including linear, non-linear and dynamic finite element analyses. Making use of traditional hand calculation methods, commercial finite element codes and bespoke analysis codes. Using assessment work to develop and substantiate component designs, inform through-life management and, in many cases, pursue regulatory approval for current class, in-build and future class submarines. Development and implementation of methodologies to assess components, along with the definition of testing programmes to underwrite those methods. Relaying the method and outcome of assessments, clearly and efficiently, to a range of audiences at all seniorities within Rolls-Royce, industry partners and customer organisations. Who we're looking for: At Rolls-Royce we embrace agility, are bold, pursue collaboration and seek simplicity in everything we do. These principles form our values and behaviours and are an essential component of our assessment process and are fundamental qualities that we seek for all roles. Essential: Qualified to degree level, or with equivalent experience, in mechanical engineering, physics or mathematics. Able to prioritise tasks and work effectively on multiple projects at the same time. Demonstrate interest in dynamic analysis and test. Desirable: Good all-round knowledge of the fundamental failure mechanisms and the methods used to assess against them. Practical experience of using finite element methods for structural component assessment, along with experience of providing support to manufacturing engineers, designers and safety case authors. Good working knowledge of dynamics and non-linear events. Experience generating and working with finite element models, using industry standard tools such as LS-DYNA, Abaqus, ANSYS, HyperMesh and the Oasys suite. Experience of working in an industry where safety is a priority and in which components are justified to safety cases and/or design code requirements. Experience of working as part of a multi-disciplinary design team; particularly where concurrent engineering methods have been used. Membership, or Associate Membership, of a relevant professional institution and working toward chartership. We're an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives. And the more perspectives we have, the more successful we'll be. By building a culture of respect and appreciation, we give everyone who works here the opportunity to realise their full potential. You can learn more about our global Inclusion strategy at Our people Rolls-Royce To work for Rolls-Royce Submarines you need to hold a Security Check (SC) clearance without any caveats to that clearance. Rolls-Royce will support the application for Security Clearance if you don't currently already have this in place. Due to the nature of work the business conducts and the protection of certain assets, you must hold a UK nationality. Any dual nationals will require additional scrutiny and background checks prior to commencing work with RRSL. Job Category Mechanical Systems Posting Date 19 Jun 2025; 00:06 Posting End Date PandoLogic.
07/10/2025
Full time
Job Description Dynamics Engineer- Submarines Full Time Derby / onsite We are currently looking for talented Engineers to join the Dynamics Group in Rolls-Royce Submarines. As an engineer in the Dynamics Group, you will be engaging primarily in structural assessments relating to impact, seismic, shock and vibration scenarios for all components within the steam raising plant. We also assess a wide range of on-board and shore-based plant support equipment and radioactive material transport containers. The work is interesting and varied; there will be situations in which you will be relied upon to respond rapidly to emergent challenges, providing a vital and valued service to the Submarines enterprise. Why Rolls-Royce? Rolls-Royce Submarines is a leader in propulsion systems design and development for the Royal Navy's nuclear submarine fleet. They are the sole provider and technical authority for the Nuclear Steam Raising Plant, managing all aspects of plant design, safety, manufacture, performance and through-life support. Powering the submarines of today and building solutions for tomorrow has never been more important. We're a leader in propulsion system design and development for the Royal Navy's nuclear submarine fleet and the sole provider and technical authority. What we offer: Join us and we'll provide an environment where you can be yourself. An inclusive, digital-first culture that invests in you, gives you a platform for continuous learning, and access to an incredible breadth and depth of opportunities to grow your career. We offer excellent development, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. What you'll be doing: In this role you will: Undertaking a broad range of mechanical assessments, including linear, non-linear and dynamic finite element analyses. Making use of traditional hand calculation methods, commercial finite element codes and bespoke analysis codes. Using assessment work to develop and substantiate component designs, inform through-life management and, in many cases, pursue regulatory approval for current class, in-build and future class submarines. Development and implementation of methodologies to assess components, along with the definition of testing programmes to underwrite those methods. Relaying the method and outcome of assessments, clearly and efficiently, to a range of audiences at all seniorities within Rolls-Royce, industry partners and customer organisations. Who we're looking for: At Rolls-Royce we embrace agility, are bold, pursue collaboration and seek simplicity in everything we do. These principles form our values and behaviours and are an essential component of our assessment process and are fundamental qualities that we seek for all roles. Essential: Qualified to degree level, or with equivalent experience, in mechanical engineering, physics or mathematics. Able to prioritise tasks and work effectively on multiple projects at the same time. Demonstrate interest in dynamic analysis and test. Desirable: Good all-round knowledge of the fundamental failure mechanisms and the methods used to assess against them. Practical experience of using finite element methods for structural component assessment, along with experience of providing support to manufacturing engineers, designers and safety case authors. Good working knowledge of dynamics and non-linear events. Experience generating and working with finite element models, using industry standard tools such as LS-DYNA, Abaqus, ANSYS, HyperMesh and the Oasys suite. Experience of working in an industry where safety is a priority and in which components are justified to safety cases and/or design code requirements. Experience of working as part of a multi-disciplinary design team; particularly where concurrent engineering methods have been used. Membership, or Associate Membership, of a relevant professional institution and working toward chartership. We're an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives. And the more perspectives we have, the more successful we'll be. By building a culture of respect and appreciation, we give everyone who works here the opportunity to realise their full potential. You can learn more about our global Inclusion strategy at Our people Rolls-Royce To work for Rolls-Royce Submarines you need to hold a Security Check (SC) clearance without any caveats to that clearance. Rolls-Royce will support the application for Security Clearance if you don't currently already have this in place. Due to the nature of work the business conducts and the protection of certain assets, you must hold a UK nationality. Any dual nationals will require additional scrutiny and background checks prior to commencing work with RRSL. Job Category Mechanical Systems Posting Date 19 Jun 2025; 00:06 Posting End Date PandoLogic.
Job Description Dynamics Engineer- Submarines Full Time Derby / onsite We are currently looking for talented Engineers to join the Dynamics Group in Rolls-Royce Submarines. As an engineer in the Dynamics Group, you will be engaging primarily in structural assessments relating to impact, seismic, shock and vibration scenarios for all components within the steam raising plant. We also assess a wide range of on-board and shore-based plant support equipment and radioactive material transport containers. The work is interesting and varied; there will be situations in which you will be relied upon to respond rapidly to emergent challenges, providing a vital and valued service to the Submarines enterprise. Why Rolls-Royce? Rolls-Royce Submarines is a leader in propulsion systems design and development for the Royal Navy's nuclear submarine fleet. They are the sole provider and technical authority for the Nuclear Steam Raising Plant, managing all aspects of plant design, safety, manufacture, performance and through-life support. Powering the submarines of today and building solutions for tomorrow has never been more important. We're a leader in propulsion system design and development for the Royal Navy's nuclear submarine fleet and the sole provider and technical authority. What we offer: Join us and we'll provide an environment where you can be yourself. An inclusive, digital-first culture that invests in you, gives you a platform for continuous learning, and access to an incredible breadth and depth of opportunities to grow your career. We offer excellent development, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. What you'll be doing: In this role you will: Undertaking a broad range of mechanical assessments, including linear, non-linear and dynamic finite element analyses.Making use of traditional hand calculation methods, commercial finite element codes and bespoke analysis codes.Using assessment work to develop and substantiate component designs, inform through-life management and, in many cases, pursue regulatory approval for current class, in-build and future class submarines.Development and implementation of methodologies to assess components, along with the definition of testing programmes to underwrite those methods.Relaying the method and outcome of assessments, clearly and efficiently, to a range of audiences at all seniorities within Rolls-Royce, industry partners and customer organisations. Who we're looking for: At Rolls-Royce we embrace agility, are bold, pursue collaboration and seek simplicity in everything we do. These principles form our values and behaviours and are an essential component of our assessment process and are fundamental qualities that we seek for all roles. Essential: Qualified to degree level, or with equivalent experience, in mechanical engineering, physics or mathematics.Able to prioritise tasks and work effectively on multiple projects at the same time.Demonstrate interest in dynamic analysis and test. Desirable: Good all-round knowledge of the fundamental failure mechanisms and the methods used to assess against them.Practical experience of using finite element methods for structural component assessment, along with experience of providing support to manufacturing engineers, designers and safety case authors.Good working knowledge of dynamics and non-linear events.Experience generating and working with finite element models, using industry standard tools such as LS-DYNA, Abaqus, ANSYS, HyperMesh and the Oasys suite.Experience of working in an industry where safety is a priority and in which components are justified to safety cases and/or design code requirements.Experience of working as part of a multi-disciplinary design team; particularly where concurrent engineering methods have been used.Membership, or Associate Membership, of a relevant professional institution and working toward chartership. We're an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives. And the more perspectives we have, the more successful we'll be. By building a culture of respect and appreciation, we give everyone who works here the opportunity to realise their full potential. You can learn more about our global Inclusion strategy at Our people Rolls-Royce To work for Rolls-Royce Submarines you need to hold a Security Check (SC) clearance without any caveats to that clearance. Rolls-Royce will support the application for Security Clearance if you don't currently already have this in place. Due to the nature of work the business conducts and the protection of certain assets, you must hold a UK nationality. Any dual nationals will require additional scrutiny and background checks prior to commencing work with RRSL. Job Category Mechanical Systems Posting Date 19 Jun 2025; 00:06 Posting End Date PandoLogic.
05/10/2025
Full time
Job Description Dynamics Engineer- Submarines Full Time Derby / onsite We are currently looking for talented Engineers to join the Dynamics Group in Rolls-Royce Submarines. As an engineer in the Dynamics Group, you will be engaging primarily in structural assessments relating to impact, seismic, shock and vibration scenarios for all components within the steam raising plant. We also assess a wide range of on-board and shore-based plant support equipment and radioactive material transport containers. The work is interesting and varied; there will be situations in which you will be relied upon to respond rapidly to emergent challenges, providing a vital and valued service to the Submarines enterprise. Why Rolls-Royce? Rolls-Royce Submarines is a leader in propulsion systems design and development for the Royal Navy's nuclear submarine fleet. They are the sole provider and technical authority for the Nuclear Steam Raising Plant, managing all aspects of plant design, safety, manufacture, performance and through-life support. Powering the submarines of today and building solutions for tomorrow has never been more important. We're a leader in propulsion system design and development for the Royal Navy's nuclear submarine fleet and the sole provider and technical authority. What we offer: Join us and we'll provide an environment where you can be yourself. An inclusive, digital-first culture that invests in you, gives you a platform for continuous learning, and access to an incredible breadth and depth of opportunities to grow your career. We offer excellent development, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. What you'll be doing: In this role you will: Undertaking a broad range of mechanical assessments, including linear, non-linear and dynamic finite element analyses.Making use of traditional hand calculation methods, commercial finite element codes and bespoke analysis codes.Using assessment work to develop and substantiate component designs, inform through-life management and, in many cases, pursue regulatory approval for current class, in-build and future class submarines.Development and implementation of methodologies to assess components, along with the definition of testing programmes to underwrite those methods.Relaying the method and outcome of assessments, clearly and efficiently, to a range of audiences at all seniorities within Rolls-Royce, industry partners and customer organisations. Who we're looking for: At Rolls-Royce we embrace agility, are bold, pursue collaboration and seek simplicity in everything we do. These principles form our values and behaviours and are an essential component of our assessment process and are fundamental qualities that we seek for all roles. Essential: Qualified to degree level, or with equivalent experience, in mechanical engineering, physics or mathematics.Able to prioritise tasks and work effectively on multiple projects at the same time.Demonstrate interest in dynamic analysis and test. Desirable: Good all-round knowledge of the fundamental failure mechanisms and the methods used to assess against them.Practical experience of using finite element methods for structural component assessment, along with experience of providing support to manufacturing engineers, designers and safety case authors.Good working knowledge of dynamics and non-linear events.Experience generating and working with finite element models, using industry standard tools such as LS-DYNA, Abaqus, ANSYS, HyperMesh and the Oasys suite.Experience of working in an industry where safety is a priority and in which components are justified to safety cases and/or design code requirements.Experience of working as part of a multi-disciplinary design team; particularly where concurrent engineering methods have been used.Membership, or Associate Membership, of a relevant professional institution and working toward chartership. We're an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives. And the more perspectives we have, the more successful we'll be. By building a culture of respect and appreciation, we give everyone who works here the opportunity to realise their full potential. You can learn more about our global Inclusion strategy at Our people Rolls-Royce To work for Rolls-Royce Submarines you need to hold a Security Check (SC) clearance without any caveats to that clearance. Rolls-Royce will support the application for Security Clearance if you don't currently already have this in place. Due to the nature of work the business conducts and the protection of certain assets, you must hold a UK nationality. Any dual nationals will require additional scrutiny and background checks prior to commencing work with RRSL. Job Category Mechanical Systems Posting Date 19 Jun 2025; 00:06 Posting End Date PandoLogic.
Job Description Dynamics Engineer- Submarines Full Time Derby / onsite We are currently looking for talented Engineers to join the Dynamics Group in Rolls-Royce Submarines. As an engineer in the Dynamics Group, you will be engaging primarily in structural assessments relating to impact, seismic, shock and vibration scenarios for all components within the steam raising plant. We also assess a wide range of on-board and shore-based plant support equipment and radioactive material transport containers. The work is interesting and varied; there will be situations in which you will be relied upon to respond rapidly to emergent challenges, providing a vital and valued service to the Submarines enterprise. Why Rolls-Royce? Rolls-Royce Submarines is a leader in propulsion systems design and development for the Royal Navy's nuclear submarine fleet. They are the sole provider and technical authority for the Nuclear Steam Raising Plant, managing all aspects of plant design, safety, manufacture, performance and through-life support. Powering the submarines of today and building solutions for tomorrow has never been more important. We're a leader in propulsion system design and development for the Royal Navy's nuclear submarine fleet and the sole provider and technical authority. What we offer: Join us and we'll provide an environment where you can be yourself. An inclusive, digital-first culture that invests in you, gives you a platform for continuous learning, and access to an incredible breadth and depth of opportunities to grow your career. We offer excellent development, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. What you'll be doing: In this role you will: Undertaking a broad range of mechanical assessments, including linear, non-linear and dynamic finite element analyses. Making use of traditional hand calculation methods, commercial finite element codes and bespoke analysis codes. Using assessment work to develop and substantiate component designs, inform through-life management and, in many cases, pursue regulatory approval for current class, in-build and future class submarines. Development and implementation of methodologies to assess components, along with the definition of testing programmes to underwrite those methods. Relaying the method and outcome of assessments, clearly and efficiently, to a range of audiences at all seniorities within Rolls-Royce, industry partners and customer organisations. Who we're looking for: At Rolls-Royce we embrace agility, are bold, pursue collaboration and seek simplicity in everything we do. These principles form our values and behaviours and are an essential component of our assessment process and are fundamental qualities that we seek for all roles. Essential: Qualified to degree level, or with equivalent experience, in mechanical engineering, physics or mathematics. Able to prioritise tasks and work effectively on multiple projects at the same time. Demonstrate interest in dynamic analysis and test. Desirable: Good all-round knowledge of the fundamental failure mechanisms and the methods used to assess against them. Practical experience of using finite element methods for structural component assessment, along with experience of providing support to manufacturing engineers, designers and safety case authors. Good working knowledge of dynamics and non-linear events. Experience generating and working with finite element models, using industry standard tools such as LS-DYNA, Abaqus, ANSYS, HyperMesh and the Oasys suite. Experience of working in an industry where safety is a priority and in which components are justified to safety cases and/or design code requirements. Experience of working as part of a multi-disciplinary design team; particularly where concurrent engineering methods have been used. Membership, or Associate Membership, of a relevant professional institution and working toward chartership. We're an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives. And the more perspectives we have, the more successful we'll be. By building a culture of respect and appreciation, we give everyone who works here the opportunity to realise their full potential. You can learn more about our global Inclusion strategy at Our people Rolls-Royce To work for Rolls-Royce Submarines you need to hold a Security Check (SC) clearance without any caveats to that clearance. Rolls-Royce will support the application for Security Clearance if you don't currently already have this in place. Due to the nature of work the business conducts and the protection of certain assets, you must hold a UK nationality. Any dual nationals will require additional scrutiny and background checks prior to commencing work with RRSL. Job Category Mechanical Systems Posting Date 19 Jun 2025; 00:06 Posting End Date PandoLogic.
03/10/2025
Full time
Job Description Dynamics Engineer- Submarines Full Time Derby / onsite We are currently looking for talented Engineers to join the Dynamics Group in Rolls-Royce Submarines. As an engineer in the Dynamics Group, you will be engaging primarily in structural assessments relating to impact, seismic, shock and vibration scenarios for all components within the steam raising plant. We also assess a wide range of on-board and shore-based plant support equipment and radioactive material transport containers. The work is interesting and varied; there will be situations in which you will be relied upon to respond rapidly to emergent challenges, providing a vital and valued service to the Submarines enterprise. Why Rolls-Royce? Rolls-Royce Submarines is a leader in propulsion systems design and development for the Royal Navy's nuclear submarine fleet. They are the sole provider and technical authority for the Nuclear Steam Raising Plant, managing all aspects of plant design, safety, manufacture, performance and through-life support. Powering the submarines of today and building solutions for tomorrow has never been more important. We're a leader in propulsion system design and development for the Royal Navy's nuclear submarine fleet and the sole provider and technical authority. What we offer: Join us and we'll provide an environment where you can be yourself. An inclusive, digital-first culture that invests in you, gives you a platform for continuous learning, and access to an incredible breadth and depth of opportunities to grow your career. We offer excellent development, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. What you'll be doing: In this role you will: Undertaking a broad range of mechanical assessments, including linear, non-linear and dynamic finite element analyses. Making use of traditional hand calculation methods, commercial finite element codes and bespoke analysis codes. Using assessment work to develop and substantiate component designs, inform through-life management and, in many cases, pursue regulatory approval for current class, in-build and future class submarines. Development and implementation of methodologies to assess components, along with the definition of testing programmes to underwrite those methods. Relaying the method and outcome of assessments, clearly and efficiently, to a range of audiences at all seniorities within Rolls-Royce, industry partners and customer organisations. Who we're looking for: At Rolls-Royce we embrace agility, are bold, pursue collaboration and seek simplicity in everything we do. These principles form our values and behaviours and are an essential component of our assessment process and are fundamental qualities that we seek for all roles. Essential: Qualified to degree level, or with equivalent experience, in mechanical engineering, physics or mathematics. Able to prioritise tasks and work effectively on multiple projects at the same time. Demonstrate interest in dynamic analysis and test. Desirable: Good all-round knowledge of the fundamental failure mechanisms and the methods used to assess against them. Practical experience of using finite element methods for structural component assessment, along with experience of providing support to manufacturing engineers, designers and safety case authors. Good working knowledge of dynamics and non-linear events. Experience generating and working with finite element models, using industry standard tools such as LS-DYNA, Abaqus, ANSYS, HyperMesh and the Oasys suite. Experience of working in an industry where safety is a priority and in which components are justified to safety cases and/or design code requirements. Experience of working as part of a multi-disciplinary design team; particularly where concurrent engineering methods have been used. Membership, or Associate Membership, of a relevant professional institution and working toward chartership. We're an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives. And the more perspectives we have, the more successful we'll be. By building a culture of respect and appreciation, we give everyone who works here the opportunity to realise their full potential. You can learn more about our global Inclusion strategy at Our people Rolls-Royce To work for Rolls-Royce Submarines you need to hold a Security Check (SC) clearance without any caveats to that clearance. Rolls-Royce will support the application for Security Clearance if you don't currently already have this in place. Due to the nature of work the business conducts and the protection of certain assets, you must hold a UK nationality. Any dual nationals will require additional scrutiny and background checks prior to commencing work with RRSL. Job Category Mechanical Systems Posting Date 19 Jun 2025; 00:06 Posting End Date PandoLogic.
Job Description Dynamics Engineer- Submarines Full Time Derby / onsite We are currently looking for talented Engineers to join the Dynamics Group in Rolls-Royce Submarines. As an engineer in the Dynamics Group, you will be engaging primarily in structural assessments relating to impact, seismic, shock and vibration scenarios for all components within the steam raising plant. We also assess a wide range of on-board and shore-based plant support equipment and radioactive material transport containers. The work is interesting and varied; there will be situations in which you will be relied upon to respond rapidly to emergent challenges, providing a vital and valued service to the Submarines enterprise. Why Rolls-Royce? Rolls-Royce Submarines is a leader in propulsion systems design and development for the Royal Navy's nuclear submarine fleet. They are the sole provider and technical authority for the Nuclear Steam Raising Plant, managing all aspects of plant design, safety, manufacture, performance and through-life support. Powering the submarines of today and building solutions for tomorrow has never been more important. We're a leader in propulsion system design and development for the Royal Navy's nuclear submarine fleet and the sole provider and technical authority. What we offer: Join us and we'll provide an environment where you can be yourself. An inclusive, digital-first culture that invests in you, gives you a platform for continuous learning, and access to an incredible breadth and depth of opportunities to grow your career. We offer excellent development, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. What you'll be doing: In this role you will: Undertaking a broad range of mechanical assessments, including linear, non-linear and dynamic finite element analyses.Making use of traditional hand calculation methods, commercial finite element codes and bespoke analysis codes.Using assessment work to develop and substantiate component designs, inform through-life management and, in many cases, pursue regulatory approval for current class, in-build and future class submarines.Development and implementation of methodologies to assess components, along with the definition of testing programmes to underwrite those methods.Relaying the method and outcome of assessments, clearly and efficiently, to a range of audiences at all seniorities within Rolls-Royce, industry partners and customer organisations. Who we're looking for: At Rolls-Royce we embrace agility, are bold, pursue collaboration and seek simplicity in everything we do. These principles form our values and behaviours and are an essential component of our assessment process and are fundamental qualities that we seek for all roles. Essential: Qualified to degree level, or with equivalent experience, in mechanical engineering, physics or mathematics.Able to prioritise tasks and work effectively on multiple projects at the same time.Demonstrate interest in dynamic analysis and test. Desirable: Good all-round knowledge of the fundamental failure mechanisms and the methods used to assess against them.Practical experience of using finite element methods for structural component assessment, along with experience of providing support to manufacturing engineers, designers and safety case authors.Good working knowledge of dynamics and non-linear events.Experience generating and working with finite element models, using industry standard tools such as LS-DYNA, Abaqus, ANSYS, HyperMesh and the Oasys suite.Experience of working in an industry where safety is a priority and in which components are justified to safety cases and/or design code requirements.Experience of working as part of a multi-disciplinary design team; particularly where concurrent engineering methods have been used.Membership, or Associate Membership, of a relevant professional institution and working toward chartership. We're an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives. And the more perspectives we have, the more successful we'll be. By building a culture of respect and appreciation, we give everyone who works here the opportunity to realise their full potential. You can learn more about our global Inclusion strategy at Our people Rolls-Royce To work for Rolls-Royce Submarines you need to hold a Security Check (SC) clearance without any caveats to that clearance. Rolls-Royce will support the application for Security Clearance if you don't currently already have this in place. Due to the nature of work the business conducts and the protection of certain assets, you must hold a UK nationality. Any dual nationals will require additional scrutiny and background checks prior to commencing work with RRSL. Job Category Mechanical Systems Posting Date 19 Jun 2025; 00:06 Posting End Date PandoLogic.
02/10/2025
Full time
Job Description Dynamics Engineer- Submarines Full Time Derby / onsite We are currently looking for talented Engineers to join the Dynamics Group in Rolls-Royce Submarines. As an engineer in the Dynamics Group, you will be engaging primarily in structural assessments relating to impact, seismic, shock and vibration scenarios for all components within the steam raising plant. We also assess a wide range of on-board and shore-based plant support equipment and radioactive material transport containers. The work is interesting and varied; there will be situations in which you will be relied upon to respond rapidly to emergent challenges, providing a vital and valued service to the Submarines enterprise. Why Rolls-Royce? Rolls-Royce Submarines is a leader in propulsion systems design and development for the Royal Navy's nuclear submarine fleet. They are the sole provider and technical authority for the Nuclear Steam Raising Plant, managing all aspects of plant design, safety, manufacture, performance and through-life support. Powering the submarines of today and building solutions for tomorrow has never been more important. We're a leader in propulsion system design and development for the Royal Navy's nuclear submarine fleet and the sole provider and technical authority. What we offer: Join us and we'll provide an environment where you can be yourself. An inclusive, digital-first culture that invests in you, gives you a platform for continuous learning, and access to an incredible breadth and depth of opportunities to grow your career. We offer excellent development, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. What you'll be doing: In this role you will: Undertaking a broad range of mechanical assessments, including linear, non-linear and dynamic finite element analyses.Making use of traditional hand calculation methods, commercial finite element codes and bespoke analysis codes.Using assessment work to develop and substantiate component designs, inform through-life management and, in many cases, pursue regulatory approval for current class, in-build and future class submarines.Development and implementation of methodologies to assess components, along with the definition of testing programmes to underwrite those methods.Relaying the method and outcome of assessments, clearly and efficiently, to a range of audiences at all seniorities within Rolls-Royce, industry partners and customer organisations. Who we're looking for: At Rolls-Royce we embrace agility, are bold, pursue collaboration and seek simplicity in everything we do. These principles form our values and behaviours and are an essential component of our assessment process and are fundamental qualities that we seek for all roles. Essential: Qualified to degree level, or with equivalent experience, in mechanical engineering, physics or mathematics.Able to prioritise tasks and work effectively on multiple projects at the same time.Demonstrate interest in dynamic analysis and test. Desirable: Good all-round knowledge of the fundamental failure mechanisms and the methods used to assess against them.Practical experience of using finite element methods for structural component assessment, along with experience of providing support to manufacturing engineers, designers and safety case authors.Good working knowledge of dynamics and non-linear events.Experience generating and working with finite element models, using industry standard tools such as LS-DYNA, Abaqus, ANSYS, HyperMesh and the Oasys suite.Experience of working in an industry where safety is a priority and in which components are justified to safety cases and/or design code requirements.Experience of working as part of a multi-disciplinary design team; particularly where concurrent engineering methods have been used.Membership, or Associate Membership, of a relevant professional institution and working toward chartership. We're an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives. And the more perspectives we have, the more successful we'll be. By building a culture of respect and appreciation, we give everyone who works here the opportunity to realise their full potential. You can learn more about our global Inclusion strategy at Our people Rolls-Royce To work for Rolls-Royce Submarines you need to hold a Security Check (SC) clearance without any caveats to that clearance. Rolls-Royce will support the application for Security Clearance if you don't currently already have this in place. Due to the nature of work the business conducts and the protection of certain assets, you must hold a UK nationality. Any dual nationals will require additional scrutiny and background checks prior to commencing work with RRSL. Job Category Mechanical Systems Posting Date 19 Jun 2025; 00:06 Posting End Date PandoLogic.
Job Description Dynamics Engineer- Submarines Full Time Derby / onsite We are currently looking for talented Engineers to join the Dynamics Group in Rolls-Royce Submarines. As an engineer in the Dynamics Group, you will be engaging primarily in structural assessments relating to impact, seismic, shock and vibration scenarios for all components within the steam raising plant. We also assess a wide range of on-board and shore-based plant support equipment and radioactive material transport containers. The work is interesting and varied; there will be situations in which you will be relied upon to respond rapidly to emergent challenges, providing a vital and valued service to the Submarines enterprise. Why Rolls-Royce? Rolls-Royce Submarines is a leader in propulsion systems design and development for the Royal Navy's nuclear submarine fleet. They are the sole provider and technical authority for the Nuclear Steam Raising Plant, managing all aspects of plant design, safety, manufacture, performance and through-life support. Powering the submarines of today and building solutions for tomorrow has never been more important. We're a leader in propulsion system design and development for the Royal Navy's nuclear submarine fleet and the sole provider and technical authority. What we offer: Join us and we'll provide an environment where you can be yourself. An inclusive, digital-first culture that invests in you, gives you a platform for continuous learning, and access to an incredible breadth and depth of opportunities to grow your career. We offer excellent development, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. What you'll be doing: In this role you will: Undertaking a broad range of mechanical assessments, including linear, non-linear and dynamic finite element analyses. Making use of traditional hand calculation methods, commercial finite element codes and bespoke analysis codes. Using assessment work to develop and substantiate component designs, inform through-life management and, in many cases, pursue regulatory approval for current class, in-build and future class submarines. Development and implementation of methodologies to assess components, along with the definition of testing programmes to underwrite those methods. Relaying the method and outcome of assessments, clearly and efficiently, to a range of audiences at all seniorities within Rolls-Royce, industry partners and customer organisations. Who we're looking for: At Rolls-Royce we embrace agility, are bold, pursue collaboration and seek simplicity in everything we do. These principles form our values and behaviours and are an essential component of our assessment process and are fundamental qualities that we seek for all roles. Essential: Qualified to degree level, or with equivalent experience, in mechanical engineering, physics or mathematics. Able to prioritise tasks and work effectively on multiple projects at the same time. Demonstrate interest in dynamic analysis and test. Desirable: Good all-round knowledge of the fundamental failure mechanisms and the methods used to assess against them. Practical experience of using finite element methods for structural component assessment, along with experience of providing support to manufacturing engineers, designers and safety case authors. Good working knowledge of dynamics and non-linear events. Experience generating and working with finite element models, using industry standard tools such as LS-DYNA, Abaqus, ANSYS, HyperMesh and the Oasys suite. Experience of working in an industry where safety is a priority and in which components are justified to safety cases and/or design code requirements. Experience of working as part of a multi-disciplinary design team; particularly where concurrent engineering methods have been used. Membership, or Associate Membership, of a relevant professional institution and working toward chartership. We're an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives. And the more perspectives we have, the more successful we'll be. By building a culture of respect and appreciation, we give everyone who works here the opportunity to realise their full potential. You can learn more about our global Inclusion strategy at Our people Rolls-Royce To work for Rolls-Royce Submarines you need to hold a Security Check (SC) clearance without any caveats to that clearance. Rolls-Royce will support the application for Security Clearance if you don't currently already have this in place. Due to the nature of work the business conducts and the protection of certain assets, you must hold a UK nationality. Any dual nationals will require additional scrutiny and background checks prior to commencing work with RRSL. Job Category Mechanical Systems Posting Date 19 Jun 2025; 00:06 Posting End Date PandoLogic.
02/10/2025
Full time
Job Description Dynamics Engineer- Submarines Full Time Derby / onsite We are currently looking for talented Engineers to join the Dynamics Group in Rolls-Royce Submarines. As an engineer in the Dynamics Group, you will be engaging primarily in structural assessments relating to impact, seismic, shock and vibration scenarios for all components within the steam raising plant. We also assess a wide range of on-board and shore-based plant support equipment and radioactive material transport containers. The work is interesting and varied; there will be situations in which you will be relied upon to respond rapidly to emergent challenges, providing a vital and valued service to the Submarines enterprise. Why Rolls-Royce? Rolls-Royce Submarines is a leader in propulsion systems design and development for the Royal Navy's nuclear submarine fleet. They are the sole provider and technical authority for the Nuclear Steam Raising Plant, managing all aspects of plant design, safety, manufacture, performance and through-life support. Powering the submarines of today and building solutions for tomorrow has never been more important. We're a leader in propulsion system design and development for the Royal Navy's nuclear submarine fleet and the sole provider and technical authority. What we offer: Join us and we'll provide an environment where you can be yourself. An inclusive, digital-first culture that invests in you, gives you a platform for continuous learning, and access to an incredible breadth and depth of opportunities to grow your career. We offer excellent development, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. What you'll be doing: In this role you will: Undertaking a broad range of mechanical assessments, including linear, non-linear and dynamic finite element analyses. Making use of traditional hand calculation methods, commercial finite element codes and bespoke analysis codes. Using assessment work to develop and substantiate component designs, inform through-life management and, in many cases, pursue regulatory approval for current class, in-build and future class submarines. Development and implementation of methodologies to assess components, along with the definition of testing programmes to underwrite those methods. Relaying the method and outcome of assessments, clearly and efficiently, to a range of audiences at all seniorities within Rolls-Royce, industry partners and customer organisations. Who we're looking for: At Rolls-Royce we embrace agility, are bold, pursue collaboration and seek simplicity in everything we do. These principles form our values and behaviours and are an essential component of our assessment process and are fundamental qualities that we seek for all roles. Essential: Qualified to degree level, or with equivalent experience, in mechanical engineering, physics or mathematics. Able to prioritise tasks and work effectively on multiple projects at the same time. Demonstrate interest in dynamic analysis and test. Desirable: Good all-round knowledge of the fundamental failure mechanisms and the methods used to assess against them. Practical experience of using finite element methods for structural component assessment, along with experience of providing support to manufacturing engineers, designers and safety case authors. Good working knowledge of dynamics and non-linear events. Experience generating and working with finite element models, using industry standard tools such as LS-DYNA, Abaqus, ANSYS, HyperMesh and the Oasys suite. Experience of working in an industry where safety is a priority and in which components are justified to safety cases and/or design code requirements. Experience of working as part of a multi-disciplinary design team; particularly where concurrent engineering methods have been used. Membership, or Associate Membership, of a relevant professional institution and working toward chartership. We're an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives. And the more perspectives we have, the more successful we'll be. By building a culture of respect and appreciation, we give everyone who works here the opportunity to realise their full potential. You can learn more about our global Inclusion strategy at Our people Rolls-Royce To work for Rolls-Royce Submarines you need to hold a Security Check (SC) clearance without any caveats to that clearance. Rolls-Royce will support the application for Security Clearance if you don't currently already have this in place. Due to the nature of work the business conducts and the protection of certain assets, you must hold a UK nationality. Any dual nationals will require additional scrutiny and background checks prior to commencing work with RRSL. Job Category Mechanical Systems Posting Date 19 Jun 2025; 00:06 Posting End Date PandoLogic.
Job Description Dynamics Engineer- Submarines Full Time Derby / onsite We are currently looking for talented Engineers to join the Dynamics Group in Rolls-Royce Submarines. As an engineer in the Dynamics Group, you will be engaging primarily in structural assessments relating to impact, seismic, shock and vibration scenarios for all components within the steam raising plant. We also assess a wide range of on-board and shore-based plant support equipment and radioactive material transport containers. The work is interesting and varied; there will be situations in which you will be relied upon to respond rapidly to emergent challenges, providing a vital and valued service to the Submarines enterprise. Why Rolls-Royce? Rolls-Royce Submarines is a leader in propulsion systems design and development for the Royal Navy's nuclear submarine fleet. They are the sole provider and technical authority for the Nuclear Steam Raising Plant, managing all aspects of plant design, safety, manufacture, performance and through-life support. Powering the submarines of today and building solutions for tomorrow has never been more important. We're a leader in propulsion system design and development for the Royal Navy's nuclear submarine fleet and the sole provider and technical authority. What we offer: Join us and we'll provide an environment where you can be yourself. An inclusive, digital-first culture that invests in you, gives you a platform for continuous learning, and access to an incredible breadth and depth of opportunities to grow your career. We offer excellent development, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. What you'll be doing: In this role you will: Undertaking a broad range of mechanical assessments, including linear, non-linear and dynamic finite element analyses.Making use of traditional hand calculation methods, commercial finite element codes and bespoke analysis codes.Using assessment work to develop and substantiate component designs, inform through-life management and, in many cases, pursue regulatory approval for current class, in-build and future class submarines.Development and implementation of methodologies to assess components, along with the definition of testing programmes to underwrite those methods.Relaying the method and outcome of assessments, clearly and efficiently, to a range of audiences at all seniorities within Rolls-Royce, industry partners and customer organisations. Who we're looking for: At Rolls-Royce we embrace agility, are bold, pursue collaboration and seek simplicity in everything we do. These principles form our values and behaviours and are an essential component of our assessment process and are fundamental qualities that we seek for all roles. Essential: Qualified to degree level, or with equivalent experience, in mechanical engineering, physics or mathematics.Able to prioritise tasks and work effectively on multiple projects at the same time.Demonstrate interest in dynamic analysis and test. Desirable: Good all-round knowledge of the fundamental failure mechanisms and the methods used to assess against them.Practical experience of using finite element methods for structural component assessment, along with experience of providing support to manufacturing engineers, designers and safety case authors.Good working knowledge of dynamics and non-linear events.Experience generating and working with finite element models, using industry standard tools such as LS-DYNA, Abaqus, ANSYS, HyperMesh and the Oasys suite.Experience of working in an industry where safety is a priority and in which components are justified to safety cases and/or design code requirements.Experience of working as part of a multi-disciplinary design team; particularly where concurrent engineering methods have been used.Membership, or Associate Membership, of a relevant professional institution and working toward chartership. We're an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives. And the more perspectives we have, the more successful we'll be. By building a culture of respect and appreciation, we give everyone who works here the opportunity to realise their full potential. You can learn more about our global Inclusion strategy at Our people Rolls-Royce To work for Rolls-Royce Submarines you need to hold a Security Check (SC) clearance without any caveats to that clearance. Rolls-Royce will support the application for Security Clearance if you don't currently already have this in place. Due to the nature of work the business conducts and the protection of certain assets, you must hold a UK nationality. Any dual nationals will require additional scrutiny and background checks prior to commencing work with RRSL. Job Category Mechanical Systems Posting Date 19 Jun 2025; 00:06 Posting End Date PandoLogic.
02/10/2025
Full time
Job Description Dynamics Engineer- Submarines Full Time Derby / onsite We are currently looking for talented Engineers to join the Dynamics Group in Rolls-Royce Submarines. As an engineer in the Dynamics Group, you will be engaging primarily in structural assessments relating to impact, seismic, shock and vibration scenarios for all components within the steam raising plant. We also assess a wide range of on-board and shore-based plant support equipment and radioactive material transport containers. The work is interesting and varied; there will be situations in which you will be relied upon to respond rapidly to emergent challenges, providing a vital and valued service to the Submarines enterprise. Why Rolls-Royce? Rolls-Royce Submarines is a leader in propulsion systems design and development for the Royal Navy's nuclear submarine fleet. They are the sole provider and technical authority for the Nuclear Steam Raising Plant, managing all aspects of plant design, safety, manufacture, performance and through-life support. Powering the submarines of today and building solutions for tomorrow has never been more important. We're a leader in propulsion system design and development for the Royal Navy's nuclear submarine fleet and the sole provider and technical authority. What we offer: Join us and we'll provide an environment where you can be yourself. An inclusive, digital-first culture that invests in you, gives you a platform for continuous learning, and access to an incredible breadth and depth of opportunities to grow your career. We offer excellent development, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. What you'll be doing: In this role you will: Undertaking a broad range of mechanical assessments, including linear, non-linear and dynamic finite element analyses.Making use of traditional hand calculation methods, commercial finite element codes and bespoke analysis codes.Using assessment work to develop and substantiate component designs, inform through-life management and, in many cases, pursue regulatory approval for current class, in-build and future class submarines.Development and implementation of methodologies to assess components, along with the definition of testing programmes to underwrite those methods.Relaying the method and outcome of assessments, clearly and efficiently, to a range of audiences at all seniorities within Rolls-Royce, industry partners and customer organisations. Who we're looking for: At Rolls-Royce we embrace agility, are bold, pursue collaboration and seek simplicity in everything we do. These principles form our values and behaviours and are an essential component of our assessment process and are fundamental qualities that we seek for all roles. Essential: Qualified to degree level, or with equivalent experience, in mechanical engineering, physics or mathematics.Able to prioritise tasks and work effectively on multiple projects at the same time.Demonstrate interest in dynamic analysis and test. Desirable: Good all-round knowledge of the fundamental failure mechanisms and the methods used to assess against them.Practical experience of using finite element methods for structural component assessment, along with experience of providing support to manufacturing engineers, designers and safety case authors.Good working knowledge of dynamics and non-linear events.Experience generating and working with finite element models, using industry standard tools such as LS-DYNA, Abaqus, ANSYS, HyperMesh and the Oasys suite.Experience of working in an industry where safety is a priority and in which components are justified to safety cases and/or design code requirements.Experience of working as part of a multi-disciplinary design team; particularly where concurrent engineering methods have been used.Membership, or Associate Membership, of a relevant professional institution and working toward chartership. We're an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives. And the more perspectives we have, the more successful we'll be. By building a culture of respect and appreciation, we give everyone who works here the opportunity to realise their full potential. You can learn more about our global Inclusion strategy at Our people Rolls-Royce To work for Rolls-Royce Submarines you need to hold a Security Check (SC) clearance without any caveats to that clearance. Rolls-Royce will support the application for Security Clearance if you don't currently already have this in place. Due to the nature of work the business conducts and the protection of certain assets, you must hold a UK nationality. Any dual nationals will require additional scrutiny and background checks prior to commencing work with RRSL. Job Category Mechanical Systems Posting Date 19 Jun 2025; 00:06 Posting End Date PandoLogic.
Job Title: ServiceNow Developer - SC Location: Hybrid (2 days/week onsite) - Choice of locations: London, Sheffield, Nottingham, Leeds, Watford Contract Duration : 12 Months Daily Rate: £700/day (Umbrella - Maximum) IR35 Status: Inside IR35 Security Clearance: SC This is a role within the in-house ServiceNow capability supporting the development of enterprise workflows and data-driven decisions. Technical Skills Proficiency in JavaScript: Core Scripting language used in ServiceNow. Experience with ServiceNow platform: Including modules like ITSM, ITOM, HRSD, CSM, and CMDB. ServiceNow Scripting: Client Scripts, Business Rules, Script Includes, UI Policies, and UI Actions. REST/SOAP API Integration: Building and consuming APIs for third-party integrations. ServiceNow Workflows: Designing and implementing Flow Designer and Legacy Workflow Editor. Service Portal Development: Custom widgets, pages, and themes. Data Management: Import Sets, Transform Maps, and Data Policies. Configuration Management: Working with CMDB and Discovery. Performance Analytics and Reporting: Creating dashboards and custom reports. Security and Access Control: Roles, ACLs, and data protection best practices. Certifications: Certified System Administrator (CSA) Certified Application Developer (CAD) Certified Implementation Specialist (CIS) - in ITSM, HR, CSM, etc. Professional Experience Hands-on experience in ServiceNow development and administration (typically 2-5+ years). Experience in Agile/Scrum environments and using tools like Jira or Azure DevOps. Project life cycle involvement: From requirements gathering to deployment and support. Working with stakeholders to translate business needs into technical solutions. Soft Skills Analytical thinking and problem-solving. Strong communication skills - both written and verbal. Team collaboration and stakeholder engagement. Adaptability to changing priorities and technologies. Attention to detail and commitment to quality. Disability Confident As a member of the disability confident scheme, CLIENT guarantees to interview all candidates who have a disability and who meet all the essential criteria for the vacancy. In cases where we have a high volume of candidates who have a disability who meet all the essential criteria, we will interview the best candidates from within that group. Armed Forces Covenant CLIENT is proud to support the Armed Forces Covenant and as such, we guarantee to interview all veterans or spouses/partners of military personnel who meet all the essential criteria for the vacancy. In cases where we have a high volume of ex-military candidates/military spouses or partners, who meet all of the essential criteria, we will interview the best candidates from within that group. If you qualify for the above, please notify us. We will be in touch to discuss your suitability and arrange your Guaranteed Interview. Should you require reasonable adjustments at any point during the recruitment process or if there is a more accessible way for us to communicate, please do let me know. To apply for this role please submit your latest CV or contact Aspect Resources
01/10/2025
Contractor
Job Title: ServiceNow Developer - SC Location: Hybrid (2 days/week onsite) - Choice of locations: London, Sheffield, Nottingham, Leeds, Watford Contract Duration : 12 Months Daily Rate: £700/day (Umbrella - Maximum) IR35 Status: Inside IR35 Security Clearance: SC This is a role within the in-house ServiceNow capability supporting the development of enterprise workflows and data-driven decisions. Technical Skills Proficiency in JavaScript: Core Scripting language used in ServiceNow. Experience with ServiceNow platform: Including modules like ITSM, ITOM, HRSD, CSM, and CMDB. ServiceNow Scripting: Client Scripts, Business Rules, Script Includes, UI Policies, and UI Actions. REST/SOAP API Integration: Building and consuming APIs for third-party integrations. ServiceNow Workflows: Designing and implementing Flow Designer and Legacy Workflow Editor. Service Portal Development: Custom widgets, pages, and themes. Data Management: Import Sets, Transform Maps, and Data Policies. Configuration Management: Working with CMDB and Discovery. Performance Analytics and Reporting: Creating dashboards and custom reports. Security and Access Control: Roles, ACLs, and data protection best practices. Certifications: Certified System Administrator (CSA) Certified Application Developer (CAD) Certified Implementation Specialist (CIS) - in ITSM, HR, CSM, etc. Professional Experience Hands-on experience in ServiceNow development and administration (typically 2-5+ years). Experience in Agile/Scrum environments and using tools like Jira or Azure DevOps. Project life cycle involvement: From requirements gathering to deployment and support. Working with stakeholders to translate business needs into technical solutions. Soft Skills Analytical thinking and problem-solving. Strong communication skills - both written and verbal. Team collaboration and stakeholder engagement. Adaptability to changing priorities and technologies. Attention to detail and commitment to quality. Disability Confident As a member of the disability confident scheme, CLIENT guarantees to interview all candidates who have a disability and who meet all the essential criteria for the vacancy. In cases where we have a high volume of candidates who have a disability who meet all the essential criteria, we will interview the best candidates from within that group. Armed Forces Covenant CLIENT is proud to support the Armed Forces Covenant and as such, we guarantee to interview all veterans or spouses/partners of military personnel who meet all the essential criteria for the vacancy. In cases where we have a high volume of ex-military candidates/military spouses or partners, who meet all of the essential criteria, we will interview the best candidates from within that group. If you qualify for the above, please notify us. We will be in touch to discuss your suitability and arrange your Guaranteed Interview. Should you require reasonable adjustments at any point during the recruitment process or if there is a more accessible way for us to communicate, please do let me know. To apply for this role please submit your latest CV or contact Aspect Resources
Hey thanks for stopping by If you're reading this you're probably ready to progress your design career with a new challenge. A new canvas to showcase your design greatness. We're an award winning & innovative technology business with a strong focus on our people culture and wellbeing, and are ready to open our loving arms to a brilliant Graphic Designer ready to make their next career move. If this sounds like the kind of place you want to be, we'd love to hear from you. Role Info: Graphic Designer £30,000 - £35,000 per annum Plus Benefits Permanent - Full Time. Hours: Monday to Friday, 9am to 5:30pm, 37.5 hours per week. Line Manager: Marketing Communications Manager. Department: Marketing. Company: International, market leading business intelligence software. Values: Energy. Integrity. Performance. Teamwork. Pedigree: Multi Award-Winning. 31,000 customers globally. MS Gold Partner. Cisco Partner. ISO 9001 & 27001. Your Skills: Graphic Design, Adobe Creative Suite, Animation, Design, WordPress, Social Media Design, Email Marketing Design, Team Collaboration, Customer Management. The Role: It's an exciting time for us (more on us later); we're growing apace, and with multiple product lines backed by serious R&D investment, including some exciting new launches, so we are looking for a Graphic Designer to grow our communications team. You will be designing a wide variety of assets and delivering a wide range of documentation in collaboration with the partner programmes and marketing teams. You'll collaborate with other team members within the business to ensure all digital assets are kept up to date and on-brand. You will work directly with our Marketing Communications Manager and business leaders to conceptualise designs for web, social, video and email and to create documentation in branded templates. Who we are: We are a multi award winning software developer. With offices in the UK, the USA, India and Australia, our specialty is Business Analytics, Call Recording and Fraud Management. Proud to be a renowned market leader, our innovative solutions are developed in-house and distributed via an extensive channel partner network, currently to over 31,000 businesses globally and still growing. This year we celebrate our 30th anniversary - that's a lot of years creating meaningful impact for organisations. On a day-to-day basis, your scope of work will include the conceptualisation, design, and execution of creative content to support our: + Portfolio of documentation. + Websites. + Campaigns. + Projects. + Videos. + Social media channels. About You: + Bachelor's degree with emphasis in graphic design or related field. + Expert proficiency in Adobe Creative Suite - especially Photoshop, InDesign, and Illustrator. + Experience with design for video, including animation. + Excellent verbal and written communication skills. + Able to effectively present information and respond to questions from management, team members and customers. + Able to work remotely from home unsupervised. + Excellent organisational skills with attention to detail. + Great team collaboration skills. + Excellent task management and ability to delegate assigned tasks. + Able to manage and effectively communicate with partner agencies and suppliers. Other platforms you might be proficient in: + Microsoft Office 365 e.g Word, Excel, PowerPoint, Outlook, Teams. + WordPress. + Social Media channels. + Email Marketing platforms. We are an equal opportunities employer, pride themselves on their already diverse workforce and they are committed to equal employment opportunities. If you have a disability or support need and require adjustments / support to allow you to apply for this role or attend the interviews, please let us know as soon as possible and they will do everything possible to accommodate you. Sounds like a good fit? Apply today! Your Previous Experience / Background Might Include: Junior Graphic Designer, Graphic Design, Visual Design, Freelance Graphic Designer, Marketing Designer, Web Designer, Multimedia Designer, Digital Content Creator, Layout Designer, Branding Specialist, Creative Designer, Print Designer, Motion Graphics Artist, UI/UX Design. Application notice We take your privacy seriously. When you apply, we shall process your details and pass your application to our client for review for this vacancy only. As you might expect you may be contacted by email, text or telephone. Your data is processed on the basis of our legitimate interests in fulfilling the recruitment process. Please refer to our Data Privacy Policy & Notice on our website for further details. If you have any pre-application questions please contact us first quoting the job title & ref. Good luck, Team RR.v
01/09/2025
Full time
Hey thanks for stopping by If you're reading this you're probably ready to progress your design career with a new challenge. A new canvas to showcase your design greatness. We're an award winning & innovative technology business with a strong focus on our people culture and wellbeing, and are ready to open our loving arms to a brilliant Graphic Designer ready to make their next career move. If this sounds like the kind of place you want to be, we'd love to hear from you. Role Info: Graphic Designer £30,000 - £35,000 per annum Plus Benefits Permanent - Full Time. Hours: Monday to Friday, 9am to 5:30pm, 37.5 hours per week. Line Manager: Marketing Communications Manager. Department: Marketing. Company: International, market leading business intelligence software. Values: Energy. Integrity. Performance. Teamwork. Pedigree: Multi Award-Winning. 31,000 customers globally. MS Gold Partner. Cisco Partner. ISO 9001 & 27001. Your Skills: Graphic Design, Adobe Creative Suite, Animation, Design, WordPress, Social Media Design, Email Marketing Design, Team Collaboration, Customer Management. The Role: It's an exciting time for us (more on us later); we're growing apace, and with multiple product lines backed by serious R&D investment, including some exciting new launches, so we are looking for a Graphic Designer to grow our communications team. You will be designing a wide variety of assets and delivering a wide range of documentation in collaboration with the partner programmes and marketing teams. You'll collaborate with other team members within the business to ensure all digital assets are kept up to date and on-brand. You will work directly with our Marketing Communications Manager and business leaders to conceptualise designs for web, social, video and email and to create documentation in branded templates. Who we are: We are a multi award winning software developer. With offices in the UK, the USA, India and Australia, our specialty is Business Analytics, Call Recording and Fraud Management. Proud to be a renowned market leader, our innovative solutions are developed in-house and distributed via an extensive channel partner network, currently to over 31,000 businesses globally and still growing. This year we celebrate our 30th anniversary - that's a lot of years creating meaningful impact for organisations. On a day-to-day basis, your scope of work will include the conceptualisation, design, and execution of creative content to support our: + Portfolio of documentation. + Websites. + Campaigns. + Projects. + Videos. + Social media channels. About You: + Bachelor's degree with emphasis in graphic design or related field. + Expert proficiency in Adobe Creative Suite - especially Photoshop, InDesign, and Illustrator. + Experience with design for video, including animation. + Excellent verbal and written communication skills. + Able to effectively present information and respond to questions from management, team members and customers. + Able to work remotely from home unsupervised. + Excellent organisational skills with attention to detail. + Great team collaboration skills. + Excellent task management and ability to delegate assigned tasks. + Able to manage and effectively communicate with partner agencies and suppliers. Other platforms you might be proficient in: + Microsoft Office 365 e.g Word, Excel, PowerPoint, Outlook, Teams. + WordPress. + Social Media channels. + Email Marketing platforms. We are an equal opportunities employer, pride themselves on their already diverse workforce and they are committed to equal employment opportunities. If you have a disability or support need and require adjustments / support to allow you to apply for this role or attend the interviews, please let us know as soon as possible and they will do everything possible to accommodate you. Sounds like a good fit? Apply today! Your Previous Experience / Background Might Include: Junior Graphic Designer, Graphic Design, Visual Design, Freelance Graphic Designer, Marketing Designer, Web Designer, Multimedia Designer, Digital Content Creator, Layout Designer, Branding Specialist, Creative Designer, Print Designer, Motion Graphics Artist, UI/UX Design. Application notice We take your privacy seriously. When you apply, we shall process your details and pass your application to our client for review for this vacancy only. As you might expect you may be contacted by email, text or telephone. Your data is processed on the basis of our legitimate interests in fulfilling the recruitment process. Please refer to our Data Privacy Policy & Notice on our website for further details. If you have any pre-application questions please contact us first quoting the job title & ref. Good luck, Team RR.v
Job Description Dynamics Engineer- Submarines Full Time Derby / onsite We are currently looking for talented Engineers to join the Dynamics Group in Rolls-Royce Submarines. As an engineer in the Dynamics Group, you will be engaging primarily in structural assessments relating to impact, seismic, shock and vibration scenarios for all components within the steam raising plant. We also assess a wide range of on-board and shore-based plant support equipment and radioactive material transport containers. The work is interesting and varied; there will be situations in which you will be relied upon to respond rapidly to emergent challenges, providing a vital and valued service to the Submarines enterprise. Why Rolls-Royce? Rolls-Royce Submarines is a leader in propulsion systems design and development for the Royal Navy's nuclear submarine fleet. They are the sole provider and technical authority for the Nuclear Steam Raising Plant, managing all aspects of plant design, safety, manufacture, performance and through-life support. Powering the submarines of today and building solutions for tomorrow has never been more important. We're a leader in propulsion system design and development for the Royal Navy's nuclear submarine fleet and the sole provider and technical authority. What we offer: Join us and we'll provide an environment where you can be yourself. An inclusive, digital-first culture that invests in you, gives you a platform for continuous learning, and access to an incredible breadth and depth of opportunities to grow your career. We offer excellent development, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. What you'll be doing: In this role you will: Undertaking a broad range of mechanical assessments, including linear, non-linear and dynamic finite element analyses.Making use of traditional hand calculation methods, commercial finite element codes and bespoke analysis codes.Using assessment work to develop and substantiate component designs, inform through-life management and, in many cases, pursue regulatory approval for current class, in-build and future class submarines.Development and implementation of methodologies to assess components, along with the definition of testing programmes to underwrite those methods.Relaying the method and outcome of assessments, clearly and efficiently, to a range of audiences at all seniorities within Rolls-Royce, industry partners and customer organisations. Who we're looking for: At Rolls-Royce we embrace agility, are bold, pursue collaboration and seek simplicity in everything we do. These principles form our values and behaviours and are an essential component of our assessment process and are fundamental qualities that we seek for all roles. Essential: Qualified to degree level, or with equivalent experience, in mechanical engineering, physics or mathematics.Able to prioritise tasks and work effectively on multiple projects at the same time.Demonstrate interest in dynamic analysis and test. Desirable: Good all-round knowledge of the fundamental failure mechanisms and the methods used to assess against them.Practical experience of using finite element methods for structural component assessment, along with experience of providing support to manufacturing engineers, designers and safety case authors.Good working knowledge of dynamics and non-linear events.Experience generating and working with finite element models, using industry standard tools such as LS-DYNA, Abaqus, ANSYS, HyperMesh and the Oasys suite.Experience of working in an industry where safety is a priority and in which components are justified to safety cases and/or design code requirements.Experience of working as part of a multi-disciplinary design team; particularly where concurrent engineering methods have been used.Membership, or Associate Membership, of a relevant professional institution and working toward chartership. We're an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives. And the more perspectives we have, the more successful we'll be. By building a culture of respect and appreciation, we give everyone who works here the opportunity to realise their full potential. You can learn more about our global Inclusion strategy at Our people Rolls-Royce To work for Rolls-Royce Submarines you need to hold a Security Check (SC) clearance without any caveats to that clearance. Rolls-Royce will support the application for Security Clearance if you don't currently already have this in place. Due to the nature of work the business conducts and the protection of certain assets, you must hold a UK nationality. Any dual nationals will require additional scrutiny and background checks prior to commencing work with RRSL. Job Category Mechanical Systems Posting Date 19 Jun 2025; 00:06 Posting End Date PandoLogic.
28/08/2025
Full time
Job Description Dynamics Engineer- Submarines Full Time Derby / onsite We are currently looking for talented Engineers to join the Dynamics Group in Rolls-Royce Submarines. As an engineer in the Dynamics Group, you will be engaging primarily in structural assessments relating to impact, seismic, shock and vibration scenarios for all components within the steam raising plant. We also assess a wide range of on-board and shore-based plant support equipment and radioactive material transport containers. The work is interesting and varied; there will be situations in which you will be relied upon to respond rapidly to emergent challenges, providing a vital and valued service to the Submarines enterprise. Why Rolls-Royce? Rolls-Royce Submarines is a leader in propulsion systems design and development for the Royal Navy's nuclear submarine fleet. They are the sole provider and technical authority for the Nuclear Steam Raising Plant, managing all aspects of plant design, safety, manufacture, performance and through-life support. Powering the submarines of today and building solutions for tomorrow has never been more important. We're a leader in propulsion system design and development for the Royal Navy's nuclear submarine fleet and the sole provider and technical authority. What we offer: Join us and we'll provide an environment where you can be yourself. An inclusive, digital-first culture that invests in you, gives you a platform for continuous learning, and access to an incredible breadth and depth of opportunities to grow your career. We offer excellent development, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. What you'll be doing: In this role you will: Undertaking a broad range of mechanical assessments, including linear, non-linear and dynamic finite element analyses.Making use of traditional hand calculation methods, commercial finite element codes and bespoke analysis codes.Using assessment work to develop and substantiate component designs, inform through-life management and, in many cases, pursue regulatory approval for current class, in-build and future class submarines.Development and implementation of methodologies to assess components, along with the definition of testing programmes to underwrite those methods.Relaying the method and outcome of assessments, clearly and efficiently, to a range of audiences at all seniorities within Rolls-Royce, industry partners and customer organisations. Who we're looking for: At Rolls-Royce we embrace agility, are bold, pursue collaboration and seek simplicity in everything we do. These principles form our values and behaviours and are an essential component of our assessment process and are fundamental qualities that we seek for all roles. Essential: Qualified to degree level, or with equivalent experience, in mechanical engineering, physics or mathematics.Able to prioritise tasks and work effectively on multiple projects at the same time.Demonstrate interest in dynamic analysis and test. Desirable: Good all-round knowledge of the fundamental failure mechanisms and the methods used to assess against them.Practical experience of using finite element methods for structural component assessment, along with experience of providing support to manufacturing engineers, designers and safety case authors.Good working knowledge of dynamics and non-linear events.Experience generating and working with finite element models, using industry standard tools such as LS-DYNA, Abaqus, ANSYS, HyperMesh and the Oasys suite.Experience of working in an industry where safety is a priority and in which components are justified to safety cases and/or design code requirements.Experience of working as part of a multi-disciplinary design team; particularly where concurrent engineering methods have been used.Membership, or Associate Membership, of a relevant professional institution and working toward chartership. We're an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives. And the more perspectives we have, the more successful we'll be. By building a culture of respect and appreciation, we give everyone who works here the opportunity to realise their full potential. You can learn more about our global Inclusion strategy at Our people Rolls-Royce To work for Rolls-Royce Submarines you need to hold a Security Check (SC) clearance without any caveats to that clearance. Rolls-Royce will support the application for Security Clearance if you don't currently already have this in place. Due to the nature of work the business conducts and the protection of certain assets, you must hold a UK nationality. Any dual nationals will require additional scrutiny and background checks prior to commencing work with RRSL. Job Category Mechanical Systems Posting Date 19 Jun 2025; 00:06 Posting End Date PandoLogic.
Engineering Manager - HVAC Location : Aldermaston, Berkshire Package : £44,990 - £67,000 (depending on your suitability and level of experience) As part of our People Promise, AWE (one of the best 25 big companies to work for in the UK) has a range of benefits to suit you. These include: Time to recharge your batteries with 270 hours (including Bank Holidays) of annual leave - plus every other Friday off work! Consideration for flexible working arrangements so that your work may fit in with your lifestyle. Just let us know on your application if you wish to work part time Opportunities for Professional Career Development that include funding for the annual membership of a relevant professional body, access to mentors and training Employee Assistance Programme and Occupational Health Services A generous defined contribution Group Personal Pension (we will pay between 9% and 13% of your pensionable pay depending on your own contribution) Life Assurance Discounts - access to savings on a wide range of everyday spending Special Leave Policy including paid time off for volunteering, public service (including reserve forces) and caring for your family A host of voluntary & core benefits to suit your health and wellbeing - more information available on our careers site What will you be responsible for? Managing engineering solutions which fully comply with all AWE and UK legal requirements together with AWE business case needs Establishing, maintaining and communicating the engineering design programme, budget and work breakdown structure Agree with the Compliance Group the extent of processes required for the specification and verification of projects Identifying and agreeing with HOD's and others as appropriate a comprehensive resource requirement for the engineering design of the project to budgetary targets Establish and maintain (and deliver designs in accordance with) the Design Control Plans for projects Ensuring project personnel undertaking engineering design duties meet the requirement to be Suitably Qualified and Experienced Persons Monitoring the co-ordination of engineering design activities of all design houses and other suppliers of engineering design contributing to the projects Monitoring Project Changes as they affect Engineering Design Delivery and the effect of these changes against the initial budget and programme Contribute to integrated safety when reviewing engineering designs and ensure that all technical and design risks are identified and appropriately managed to meet project requirements and the letter and intent of the CDM Regulations, including discharging the designers role What will you need to be considered? HVAC background with experience of designing complex HVAC systems in hazardous or critical environments such as explosive atmospheres, close environmental control, chemical atmospheres, clean rooms and laboratories, nuclear, business critical etc Good technical and management skills including problem solving and decision making Good oral, written and presentational skills with a particular aptitude for report, documentation and letter writing Familiarity with standard office software including word processors, spreadsheets, e-mail, presentations and databases Ideally degree in engineering-related discipline or Chartered Membership of an engineering institution Candidates must be willing and able to obtain and maintain the necessary security clearance for the role.
17/08/2023
Full time
Engineering Manager - HVAC Location : Aldermaston, Berkshire Package : £44,990 - £67,000 (depending on your suitability and level of experience) As part of our People Promise, AWE (one of the best 25 big companies to work for in the UK) has a range of benefits to suit you. These include: Time to recharge your batteries with 270 hours (including Bank Holidays) of annual leave - plus every other Friday off work! Consideration for flexible working arrangements so that your work may fit in with your lifestyle. Just let us know on your application if you wish to work part time Opportunities for Professional Career Development that include funding for the annual membership of a relevant professional body, access to mentors and training Employee Assistance Programme and Occupational Health Services A generous defined contribution Group Personal Pension (we will pay between 9% and 13% of your pensionable pay depending on your own contribution) Life Assurance Discounts - access to savings on a wide range of everyday spending Special Leave Policy including paid time off for volunteering, public service (including reserve forces) and caring for your family A host of voluntary & core benefits to suit your health and wellbeing - more information available on our careers site What will you be responsible for? Managing engineering solutions which fully comply with all AWE and UK legal requirements together with AWE business case needs Establishing, maintaining and communicating the engineering design programme, budget and work breakdown structure Agree with the Compliance Group the extent of processes required for the specification and verification of projects Identifying and agreeing with HOD's and others as appropriate a comprehensive resource requirement for the engineering design of the project to budgetary targets Establish and maintain (and deliver designs in accordance with) the Design Control Plans for projects Ensuring project personnel undertaking engineering design duties meet the requirement to be Suitably Qualified and Experienced Persons Monitoring the co-ordination of engineering design activities of all design houses and other suppliers of engineering design contributing to the projects Monitoring Project Changes as they affect Engineering Design Delivery and the effect of these changes against the initial budget and programme Contribute to integrated safety when reviewing engineering designs and ensure that all technical and design risks are identified and appropriately managed to meet project requirements and the letter and intent of the CDM Regulations, including discharging the designers role What will you need to be considered? HVAC background with experience of designing complex HVAC systems in hazardous or critical environments such as explosive atmospheres, close environmental control, chemical atmospheres, clean rooms and laboratories, nuclear, business critical etc Good technical and management skills including problem solving and decision making Good oral, written and presentational skills with a particular aptitude for report, documentation and letter writing Familiarity with standard office software including word processors, spreadsheets, e-mail, presentations and databases Ideally degree in engineering-related discipline or Chartered Membership of an engineering institution Candidates must be willing and able to obtain and maintain the necessary security clearance for the role.
Our Relaunch Programme is aimed at supporting talented professionals back into the business by providing a tailored 6-month programme to help refresh and update existing skills as well as developing confidence. We understand that you won't necessarily match every requirement on the job description but will have some relevant previous experience and a willingness to learn and further develop your skills in this area. If you have had a career break of 1 years or beyond, for whatever reason, we would love to hear from you! The Job on Offer The Cloud and Custom Applications (CCA) business unit is a core part of Capgemini UK's Application Services organisation. We specialise in the use of leading edge technologies, forward looking platforms and agile delivery processes to develop business solutions for large private and public sector organisations. The CCA capability teams provide the breadth of skills and experience required to undertake the end-to-end delivery of these systems, services and solutions. The BA team is a core part of CCA and Capgemini has invested significantly in building a market leading Digital BA capability. Whilst we have already have a team of 45 BAs working in this area and it is our priority to actively invest further to grow this capability through recruitment and training. Your role Working with stakeholders and business users from the customer to elicit, capture, analyse, refine, communicate and document their requirements Representing the customer (acting as a proxy) in support of the delivery teams throughout the project Representing the technical team in communication with the customer about the project delivery Providing support to the architects, designers and developers in the definition of technical solutions Working with User Experience and Information Architects in the definition of Customer Journeys and the production of wireframes and prototypes Validating that the functional and non-functional requirements are appropriately implemented within the solution Assisting with the estimation of timescales, resources and planning to successfully deliver a project Be a contributor to the creation of best practices through the identification of reusable project assets Maintaining up-to-date knowledge of the latest IT trends, best practices and digital technologies Coaching and developing our people, particularly our more junior BAs and Graduate community (for more senior BA positions) Acting as Scrum Master, Product Owner and/or Agile Coach (for more senior BA positions) Your profile As a Digital Business Analyst you will be responsible for activities on projects and programmes of all sizes. You will be able to understand our client's business needs and be able to creatively shape and refine business solutions to meet those needs. In guiding and advising clients to help them develop and refine requirements, you must be able to quickly establish your credibility with client staff at all levels. A track record of working on IT development programmes with demonstrable experience of working on a variety of different IT delivery projects. Exposure to a digital suite of systems such as CRM, CMS, Mobile Apps, Social Media and Ecommerce Experience of working with a recognised Agile or Iterative development methodology (e.g. Scrum, XP, DSDM) Experience of Agile documentation including Backlogs, Customer Journeys, Use Cases, User Stories, Acceptance Criteria etc Experience of a variety of requirements elicitation techniques, (e.g. interviews, questionnaires, user observation, workshops, role playing and prototyping) Experience of analysis of both functional and non-functional requirements Experience of the full project lifecycle and a good understanding of project roles and activities (technical and non-technical) required for successful delivery Good facilitation and influencing skills with the ability to work with large groups of customers of varying level of seniority from user to board level Excellent communication skills and able to communicate with and present to internal teams and customers with technical and non-technical backgrounds You - bring your values, energy, motivation and sense of humour to add to and enhance our team and culture. Experience of leadership of other BAs User interface design and wireframing skills Experience of working in Scrum Master and/or Product Owner roles (with any certifications) Modelling of the business domain - process, rules and objects / data Formal requirements management and traceability (including use of tools) Working in a GDS framework Previous consulting experience within major consultancy or SI organisation Why Capgemini is unique At Capgemini we don't just believe in Diversity & Inclusion, we actively go out to making it a working reality. Driven by our core values and Active Inclusion Campaign, we build environments where you can bring you whole self to work. Capgemini offers the opportunity to shape your career path, based on your interests and ambitions. For example, if you want to become a 'People Manager' Connected Manager learning journey is there for you. If you want to become an 'Architect' our Global Architect Community offerings can help you get there. Get the future you want Growing clients' businesses while building a more sustainable, more inclusive future is a tough ask. But when you join Capgemini, you join a thriving company and become part of a diverse collective of free-thinkers, entrepreneurs and industry experts. A powerful source of energy that drives us all to find new ways technology can help us reimagine what's possible. It's why, together, we seek out opportunities that will transform the world's leading businesses. And it's how you'll gain the experiences and connections you need to shape your future. By learning from each other every day, sharing knowledge and always pushing yourself to do better, you'll build the skills you want. And you'll use them to help our clients leverage technology to grow their business and give innovation that human touch the world needs. So, it might not always be easy, but making the world a better place rarely is. Capgemini. Get The Future You Want. About Capgemini Capgemini is a global leader in partnering with companies to transform and manage their business by harnessing the power of technology. The Group is guided everyday by its purpose of unleashing human energy through technology for an inclusive and sustainable future. It is a responsible and diverse organization of over 340,000 team members in more than 50 countries. With its strong 55-year heritage and deep industry expertise, Capgemini is trusted by its clients to address the entire breadth of their business needs, from strategy and design to operations, fueled by the fast evolving and innovative world of cloud, data, AI, connectivity, software, digital engineering and platforms. The Group reported in 2021 global revenues of €18 billion.
23/09/2022
Full time
Our Relaunch Programme is aimed at supporting talented professionals back into the business by providing a tailored 6-month programme to help refresh and update existing skills as well as developing confidence. We understand that you won't necessarily match every requirement on the job description but will have some relevant previous experience and a willingness to learn and further develop your skills in this area. If you have had a career break of 1 years or beyond, for whatever reason, we would love to hear from you! The Job on Offer The Cloud and Custom Applications (CCA) business unit is a core part of Capgemini UK's Application Services organisation. We specialise in the use of leading edge technologies, forward looking platforms and agile delivery processes to develop business solutions for large private and public sector organisations. The CCA capability teams provide the breadth of skills and experience required to undertake the end-to-end delivery of these systems, services and solutions. The BA team is a core part of CCA and Capgemini has invested significantly in building a market leading Digital BA capability. Whilst we have already have a team of 45 BAs working in this area and it is our priority to actively invest further to grow this capability through recruitment and training. Your role Working with stakeholders and business users from the customer to elicit, capture, analyse, refine, communicate and document their requirements Representing the customer (acting as a proxy) in support of the delivery teams throughout the project Representing the technical team in communication with the customer about the project delivery Providing support to the architects, designers and developers in the definition of technical solutions Working with User Experience and Information Architects in the definition of Customer Journeys and the production of wireframes and prototypes Validating that the functional and non-functional requirements are appropriately implemented within the solution Assisting with the estimation of timescales, resources and planning to successfully deliver a project Be a contributor to the creation of best practices through the identification of reusable project assets Maintaining up-to-date knowledge of the latest IT trends, best practices and digital technologies Coaching and developing our people, particularly our more junior BAs and Graduate community (for more senior BA positions) Acting as Scrum Master, Product Owner and/or Agile Coach (for more senior BA positions) Your profile As a Digital Business Analyst you will be responsible for activities on projects and programmes of all sizes. You will be able to understand our client's business needs and be able to creatively shape and refine business solutions to meet those needs. In guiding and advising clients to help them develop and refine requirements, you must be able to quickly establish your credibility with client staff at all levels. A track record of working on IT development programmes with demonstrable experience of working on a variety of different IT delivery projects. Exposure to a digital suite of systems such as CRM, CMS, Mobile Apps, Social Media and Ecommerce Experience of working with a recognised Agile or Iterative development methodology (e.g. Scrum, XP, DSDM) Experience of Agile documentation including Backlogs, Customer Journeys, Use Cases, User Stories, Acceptance Criteria etc Experience of a variety of requirements elicitation techniques, (e.g. interviews, questionnaires, user observation, workshops, role playing and prototyping) Experience of analysis of both functional and non-functional requirements Experience of the full project lifecycle and a good understanding of project roles and activities (technical and non-technical) required for successful delivery Good facilitation and influencing skills with the ability to work with large groups of customers of varying level of seniority from user to board level Excellent communication skills and able to communicate with and present to internal teams and customers with technical and non-technical backgrounds You - bring your values, energy, motivation and sense of humour to add to and enhance our team and culture. Experience of leadership of other BAs User interface design and wireframing skills Experience of working in Scrum Master and/or Product Owner roles (with any certifications) Modelling of the business domain - process, rules and objects / data Formal requirements management and traceability (including use of tools) Working in a GDS framework Previous consulting experience within major consultancy or SI organisation Why Capgemini is unique At Capgemini we don't just believe in Diversity & Inclusion, we actively go out to making it a working reality. Driven by our core values and Active Inclusion Campaign, we build environments where you can bring you whole self to work. Capgemini offers the opportunity to shape your career path, based on your interests and ambitions. For example, if you want to become a 'People Manager' Connected Manager learning journey is there for you. If you want to become an 'Architect' our Global Architect Community offerings can help you get there. Get the future you want Growing clients' businesses while building a more sustainable, more inclusive future is a tough ask. But when you join Capgemini, you join a thriving company and become part of a diverse collective of free-thinkers, entrepreneurs and industry experts. A powerful source of energy that drives us all to find new ways technology can help us reimagine what's possible. It's why, together, we seek out opportunities that will transform the world's leading businesses. And it's how you'll gain the experiences and connections you need to shape your future. By learning from each other every day, sharing knowledge and always pushing yourself to do better, you'll build the skills you want. And you'll use them to help our clients leverage technology to grow their business and give innovation that human touch the world needs. So, it might not always be easy, but making the world a better place rarely is. Capgemini. Get The Future You Want. About Capgemini Capgemini is a global leader in partnering with companies to transform and manage their business by harnessing the power of technology. The Group is guided everyday by its purpose of unleashing human energy through technology for an inclusive and sustainable future. It is a responsible and diverse organization of over 340,000 team members in more than 50 countries. With its strong 55-year heritage and deep industry expertise, Capgemini is trusted by its clients to address the entire breadth of their business needs, from strategy and design to operations, fueled by the fast evolving and innovative world of cloud, data, AI, connectivity, software, digital engineering and platforms. The Group reported in 2021 global revenues of €18 billion.
Site Name: Upper Providence, UK - Hertfordshire - Stevenage Posted Date: Sep 2 2022 THIS ROLE LOCATED IN UPPER PROVIDENCE OR STEVENAGE-UK. CANDIDATE MUST BE WILLING TO WORK IN A HYBRID SITUATION. R&D Tech strive to deliver products and services to our R&D customers that meet the needs of the business whilst being efficient, effective and satisfying to use. We are seeking motivated talent interested in solving problems, improving existing patterns and finding innovative solutions for new use cases and features. With this exciting opportunity you will be part of a team supporting business outcomes for Clinical Trials Supplies products. In this role, the candidate will directly report to the Product Owner, and interact with the business as well as our technical team, including architects and engineers. The goal is to work closely with the Product Owner and other members of the product team, with a clear focus on delivering value quickly while helping to steer the product area towards business- and user-centred improvements within agile ways of working. This role will provide YOU the opportunity to lead key activities to progress YOUR career. These responsibilities include some of the following: Primary responsibility is to drive requirements gathering, definition and translating them into insights-focused solutions Lead the development of new features user requirements, solution mockup, prototypes by collaborating with Product owner, Agile Facilitator to develop deployment plans Document, communicate business requirements and work closely with the development team to ensure an accurate understanding of the business deliverable and implementation Facilitate discussions with business partners to understand current and future state business process / requirements Maintain data catalog and use case library for assigned products Innovate new consumer experiences, produce design solutions using sketches, wireframes Optimizing the delivery of business value through business partnering, process improvement, user research and user-centred design Driving process optimization through process modelling and service design, taking into consideration the product strategy and system and data landscapes. Engaging with the R&D Tech UX & Design Team to support the maturity of UX and Design across R&D Tech, specifically working with other UX practitioners and sharing experiences. Keeping up with internal and external trends in your product area, including mobile, wearables and social media. Why you? Basic Qualifications: We are looking for professionals with these required skills to achieve our goals: Bachelor's degree (IT) or Master's degree in computer science, Engineering or related field 5+ years of prior working experience in business analysis in Pharma or related area Prior experience with driving the development of proof of concept, working in matrix environment, and eliciting requirements for dynamic products Expertise in user centered design principles and best practices Preferred Qualifications: If you have the following characteristics, it would be a plus: Deep understanding of data management best practices Experience in Agile ways of working Experience of Pharmaceuticals processes and systems (Tech in the Pharma industry) Strong creativity, problem solving, collaboration, communication, attention to detail and presentation skills Experience with creating dashboards and Data Visualization and Business Intelligence tools (ex: Power BI) The position involves a large amount of influencing and communication to individual contributors, lower/mid-management, and external partners across the Organization to apply product analysis and design in a business context with deep analytical and meaningful insights Why you? Basic Qualifications: We are looking for professionals with these required skills to achieve our goals: Bachelor's degree (IT) 5+ years' experience in working in IT software analysis, design, and delivery (both analytical and technical) 5+ year cloud product experience Preferred Qualifications: If you have the following characteristics, it would be a plus: Experience of Pharmaceuticals processes and systems (Tech in the Pharma industry) Strong creativity, problem solving, collaboration, communication, attention to detail and presentation skills Experience with creating dashboards and Data Visualization and Business Intelligence tools (ex: Power BI) Experience on Agile ways of working The position involves a large amount of influencing and communication to individual contributors, lower/mid-management, and external partners across the Organization to apply product analysis and design in a business context with deep analytical and meaningful insights Why GSK? Our values and expectations are at the heart of everything we do and form an important part of our culture. These include Patient focus, Transparency, Respect, Integrity along with Courage, Accountability, Development, and Teamwork. As GSK focuses on our values and expectations and a culture of innovation, performance, and trust, the successful candidate will demonstrate the following capabilities: Operating at pace and agile decision-making - using evidence and applying judgement to balance pace, rigour and risk. Committed to delivering high quality results, overcoming challenges, focusing on what matters, execution. Continuously looking for opportunities to learn, build skills and share learning. Sustaining energy and well-being Building strong relationships and collaboration, honest and open conversations. Budgeting and cost-consciousness If you require an accommodation or other assistance to apply for a job at GSK, please contact the GSK Service Centre at 1- (US Toll Free) or +1 (outside US). GSK is an Equal Opportunity Employer and, in the US, we adhere to Affirmative Action principles. This ensures that all qualified applicants will receive equal consideration for employment without regard to race, color, national origin, religion, sex, pregnancy, marital status, sexual orientation, gender identity/expression, age, disability, genetic information, military service, covered/protected veteran status or any other federal, state or local protected class. At GSK, the health and safety of our employees are of paramount importance. As a science-led healthcare company on a mission to get ahead of disease together, we believe that supporting vaccination against COVID-19 is the single best thing we can do in the US to ensure the health and safety of our employees, complementary workers, workplaces, customers, consumers, communities, and the patients we serve. GSK has made the decision to require all US employees to be fully vaccinated against COVID-19, where allowed by state or local law and where vaccine supply is readily available. The only exceptions to this requirement are employees who are approved for an accommodation for religious, medical or disability-related reasons. Important notice to Employment businesses/ Agencies GSK does not accept referrals from employment businesses and/or employment agencies in respect of the vacancies posted on this site. All employment businesses/agencies are required to contact GSK's commercial and general procurement/human resources department to obtain prior written authorization before referring any candidates to GSK. The obtaining of prior written authorization is a condition precedent to any agreement (verbal or written) between the employment business/ agency and GSK. In the absence of such written authorization being obtained any actions undertaken by the employment business/agency shall be deemed to have been performed without the consent or contractual agreement of GSK. GSK shall therefore not be liable for any fees arising from such actions or any fees arising from any referrals by employment businesses/agencies in respect of the vacancies posted on this site. Please note that if you are a US Licensed Healthcare Professional or Healthcare Professional as defined by the laws of the state issuing your license, GSK may be required to capture and report expenses GSK incurs, on your behalf, in the event you are afforded an interview for employment. This capture of applicable transfers of value is necessary to ensure GSK's compliance to all federal and state US Transparency requirements. For more information, please visit GSK's Transparency Reporting For the Record site.
23/09/2022
Full time
Site Name: Upper Providence, UK - Hertfordshire - Stevenage Posted Date: Sep 2 2022 THIS ROLE LOCATED IN UPPER PROVIDENCE OR STEVENAGE-UK. CANDIDATE MUST BE WILLING TO WORK IN A HYBRID SITUATION. R&D Tech strive to deliver products and services to our R&D customers that meet the needs of the business whilst being efficient, effective and satisfying to use. We are seeking motivated talent interested in solving problems, improving existing patterns and finding innovative solutions for new use cases and features. With this exciting opportunity you will be part of a team supporting business outcomes for Clinical Trials Supplies products. In this role, the candidate will directly report to the Product Owner, and interact with the business as well as our technical team, including architects and engineers. The goal is to work closely with the Product Owner and other members of the product team, with a clear focus on delivering value quickly while helping to steer the product area towards business- and user-centred improvements within agile ways of working. This role will provide YOU the opportunity to lead key activities to progress YOUR career. These responsibilities include some of the following: Primary responsibility is to drive requirements gathering, definition and translating them into insights-focused solutions Lead the development of new features user requirements, solution mockup, prototypes by collaborating with Product owner, Agile Facilitator to develop deployment plans Document, communicate business requirements and work closely with the development team to ensure an accurate understanding of the business deliverable and implementation Facilitate discussions with business partners to understand current and future state business process / requirements Maintain data catalog and use case library for assigned products Innovate new consumer experiences, produce design solutions using sketches, wireframes Optimizing the delivery of business value through business partnering, process improvement, user research and user-centred design Driving process optimization through process modelling and service design, taking into consideration the product strategy and system and data landscapes. Engaging with the R&D Tech UX & Design Team to support the maturity of UX and Design across R&D Tech, specifically working with other UX practitioners and sharing experiences. Keeping up with internal and external trends in your product area, including mobile, wearables and social media. Why you? Basic Qualifications: We are looking for professionals with these required skills to achieve our goals: Bachelor's degree (IT) or Master's degree in computer science, Engineering or related field 5+ years of prior working experience in business analysis in Pharma or related area Prior experience with driving the development of proof of concept, working in matrix environment, and eliciting requirements for dynamic products Expertise in user centered design principles and best practices Preferred Qualifications: If you have the following characteristics, it would be a plus: Deep understanding of data management best practices Experience in Agile ways of working Experience of Pharmaceuticals processes and systems (Tech in the Pharma industry) Strong creativity, problem solving, collaboration, communication, attention to detail and presentation skills Experience with creating dashboards and Data Visualization and Business Intelligence tools (ex: Power BI) The position involves a large amount of influencing and communication to individual contributors, lower/mid-management, and external partners across the Organization to apply product analysis and design in a business context with deep analytical and meaningful insights Why you? Basic Qualifications: We are looking for professionals with these required skills to achieve our goals: Bachelor's degree (IT) 5+ years' experience in working in IT software analysis, design, and delivery (both analytical and technical) 5+ year cloud product experience Preferred Qualifications: If you have the following characteristics, it would be a plus: Experience of Pharmaceuticals processes and systems (Tech in the Pharma industry) Strong creativity, problem solving, collaboration, communication, attention to detail and presentation skills Experience with creating dashboards and Data Visualization and Business Intelligence tools (ex: Power BI) Experience on Agile ways of working The position involves a large amount of influencing and communication to individual contributors, lower/mid-management, and external partners across the Organization to apply product analysis and design in a business context with deep analytical and meaningful insights Why GSK? Our values and expectations are at the heart of everything we do and form an important part of our culture. These include Patient focus, Transparency, Respect, Integrity along with Courage, Accountability, Development, and Teamwork. As GSK focuses on our values and expectations and a culture of innovation, performance, and trust, the successful candidate will demonstrate the following capabilities: Operating at pace and agile decision-making - using evidence and applying judgement to balance pace, rigour and risk. Committed to delivering high quality results, overcoming challenges, focusing on what matters, execution. Continuously looking for opportunities to learn, build skills and share learning. Sustaining energy and well-being Building strong relationships and collaboration, honest and open conversations. Budgeting and cost-consciousness If you require an accommodation or other assistance to apply for a job at GSK, please contact the GSK Service Centre at 1- (US Toll Free) or +1 (outside US). GSK is an Equal Opportunity Employer and, in the US, we adhere to Affirmative Action principles. This ensures that all qualified applicants will receive equal consideration for employment without regard to race, color, national origin, religion, sex, pregnancy, marital status, sexual orientation, gender identity/expression, age, disability, genetic information, military service, covered/protected veteran status or any other federal, state or local protected class. At GSK, the health and safety of our employees are of paramount importance. As a science-led healthcare company on a mission to get ahead of disease together, we believe that supporting vaccination against COVID-19 is the single best thing we can do in the US to ensure the health and safety of our employees, complementary workers, workplaces, customers, consumers, communities, and the patients we serve. GSK has made the decision to require all US employees to be fully vaccinated against COVID-19, where allowed by state or local law and where vaccine supply is readily available. The only exceptions to this requirement are employees who are approved for an accommodation for religious, medical or disability-related reasons. Important notice to Employment businesses/ Agencies GSK does not accept referrals from employment businesses and/or employment agencies in respect of the vacancies posted on this site. All employment businesses/agencies are required to contact GSK's commercial and general procurement/human resources department to obtain prior written authorization before referring any candidates to GSK. The obtaining of prior written authorization is a condition precedent to any agreement (verbal or written) between the employment business/ agency and GSK. In the absence of such written authorization being obtained any actions undertaken by the employment business/agency shall be deemed to have been performed without the consent or contractual agreement of GSK. GSK shall therefore not be liable for any fees arising from such actions or any fees arising from any referrals by employment businesses/agencies in respect of the vacancies posted on this site. Please note that if you are a US Licensed Healthcare Professional or Healthcare Professional as defined by the laws of the state issuing your license, GSK may be required to capture and report expenses GSK incurs, on your behalf, in the event you are afforded an interview for employment. This capture of applicable transfers of value is necessary to ensure GSK's compliance to all federal and state US Transparency requirements. For more information, please visit GSK's Transparency Reporting For the Record site.
Jobs - Frequently Asked Questions
Use the location filter to find IT jobs in cities like London, Manchester, Birmingham, and across the UK.
Entry-level roles include IT support technician, junior developer, QA tester, and helpdesk analyst.
New jobs are posted daily. Set up alerts to be notified as soon as new roles match your preferences.
Key skills include problem-solving, coding, cloud computing, networking, and familiarity with tools like AWS or SQL.
Yes, many employers offer training or junior roles. Focus on building a strong CV with relevant coursework or personal projects.
