Lead Controls & Instrumentation Engineer Location: London - Hybrid - 12 month contract Rate: £70 per hour Outside IR35 - Must have UK LTD Company and Company insurances to apply. Applicants must have the right to live and work in the UK Penspen are looking for a Lead Controls & Instrumentation Engineer The primary location is Holborn, London Role: Client interface for C&I deliverables + delivering on the Hynfra FEED + support of other projects as required. Office attendance 1 day per week in Holborn office. Penspen cannot confirm a 40 hour week. Do you have proven specialised engineering work experience within the Oil & Gas Sector (Upstream, Downstream, Pipeline and Petrochemical industry)? Have you successfully executed numerous international high-profile engineering projects with UK & international clients? Main Purpose Of Role To Lead across the Region on all Engineering delivery, Planning, Support to Operations, Project related co-ordination of Design, Engineering and Consultancy implementation of project work for Control & Instrumentation discipline. Responsible for assignments differing from a complex nature to short term consultancy support and advice to Clients and our Teams in the field, requiring comprehensive knowledge and skills in these combined disciplines. Can also undertake engineering effort in assigned area, including determination of new techniques to be used. Lead, direct, motivate, coach and develop engineers within discipline to attain their potential thus ensuring effective implementation of company strategic plans, making full use of ESD where possible. Consult with client to seek mutual understanding and agreement on the overall execution and major deliverables. Make recommendations concerning selection and training of staff. Responsibilities Technical Provide technical guidance to the Engineers/ Designers/ Technicians/ CAD and other associated personnel within the C&I Dept. Develop full scope of projects at hand from Basic conceptual through FEED to Detailed Design, Procurement, Installation inspection, Testing, Pre-commissioning, Commissioning and as needed, Operational Engineering support. Understand Codes and Standards applicable to work carried out and raise deviations where necessary. Responsible for bidding, awarding, technical design and implementation of Automation & Control Systems, Supervisory Control and Data Acquisition (SCADA) Systems, Control Centres and Communication Networks. Promote good communication and coordination within respective teams, across other disciplines and Service lines and Regions, with ESD and current and/or prospective customers. Responsible for completion of all assigned C&I design deliverables within a project team on projects associated with oil and gas pipelines and all associated facilities. Oversight in the preparation of MTOs, reports, specifications, data sheets, calculations and technical requisitions for all C&I scopes and provide support and guidance to fellow engineers as necessary to fully define the design requirements and equipment and services required in accordance with Company processes, procedures, work instructions, standards and current legislation. Participate in Project reviews, HAZOPs and Design Reviews, SIL Assessment & process/controls Safety Management. Provide technical direction and supervision of Engineering Design/ CAD personnel in the preparation of C&I data on process flow diagrams, P&IDs, hook-up drawings, installation details, equipment, material MTOs and all other associated design deliverables. Undertake Vendor review and pre-qualification, bid evaluations including commercial and technical clarifications, participation of vendor meetings and provide assistance in contracting strategy and C&I package deliverables. Ensure integrity, effectiveness, safety, robustness and fitness for purpose across the C&I design on consultancy, feasibility study, basic design, front-end engineering design, detailed design and as needed on EPC turn-key projects. Ensure work performed is carried out in accordance with the Penspen Group ISO 9001 Accredited Quality System, including ISO 14001 Environmental Procedures and ISO 18001 Health and Safety Procedures. Knowledge of COMAH compliance on instrumented systems. Conduct EC&I F.A.T. / S.A.T. and corresponding sign off. Knowledge and experience of fiscal metering desirable. G17 approver / appraiser highly desirable. Generic Create, check and approve project deliverables, as directed. Provide guidance and direction to engineers on the various tasks allocated to them by the Lead Engineer and Project Manager. Liaise directly with Clients Leads, as requested, on technical level to ensure their needs are being addressed. Assist Business Stream Management in preparing proposals by providing technical expertise in respective field. Cost control - good awareness of Project CTRs and the actual time spent creating, checking and approving project deliverables. Highlighting any potential project time overrun to the Project Lead. Work to improve efficiency and effectiveness of the design process. If you have the skills and can work in London office 3 days a week with your LTD Company please click the link to apply.
30/05/2026
Full time
Lead Controls & Instrumentation Engineer Location: London - Hybrid - 12 month contract Rate: £70 per hour Outside IR35 - Must have UK LTD Company and Company insurances to apply. Applicants must have the right to live and work in the UK Penspen are looking for a Lead Controls & Instrumentation Engineer The primary location is Holborn, London Role: Client interface for C&I deliverables + delivering on the Hynfra FEED + support of other projects as required. Office attendance 1 day per week in Holborn office. Penspen cannot confirm a 40 hour week. Do you have proven specialised engineering work experience within the Oil & Gas Sector (Upstream, Downstream, Pipeline and Petrochemical industry)? Have you successfully executed numerous international high-profile engineering projects with UK & international clients? Main Purpose Of Role To Lead across the Region on all Engineering delivery, Planning, Support to Operations, Project related co-ordination of Design, Engineering and Consultancy implementation of project work for Control & Instrumentation discipline. Responsible for assignments differing from a complex nature to short term consultancy support and advice to Clients and our Teams in the field, requiring comprehensive knowledge and skills in these combined disciplines. Can also undertake engineering effort in assigned area, including determination of new techniques to be used. Lead, direct, motivate, coach and develop engineers within discipline to attain their potential thus ensuring effective implementation of company strategic plans, making full use of ESD where possible. Consult with client to seek mutual understanding and agreement on the overall execution and major deliverables. Make recommendations concerning selection and training of staff. Responsibilities Technical Provide technical guidance to the Engineers/ Designers/ Technicians/ CAD and other associated personnel within the C&I Dept. Develop full scope of projects at hand from Basic conceptual through FEED to Detailed Design, Procurement, Installation inspection, Testing, Pre-commissioning, Commissioning and as needed, Operational Engineering support. Understand Codes and Standards applicable to work carried out and raise deviations where necessary. Responsible for bidding, awarding, technical design and implementation of Automation & Control Systems, Supervisory Control and Data Acquisition (SCADA) Systems, Control Centres and Communication Networks. Promote good communication and coordination within respective teams, across other disciplines and Service lines and Regions, with ESD and current and/or prospective customers. Responsible for completion of all assigned C&I design deliverables within a project team on projects associated with oil and gas pipelines and all associated facilities. Oversight in the preparation of MTOs, reports, specifications, data sheets, calculations and technical requisitions for all C&I scopes and provide support and guidance to fellow engineers as necessary to fully define the design requirements and equipment and services required in accordance with Company processes, procedures, work instructions, standards and current legislation. Participate in Project reviews, HAZOPs and Design Reviews, SIL Assessment & process/controls Safety Management. Provide technical direction and supervision of Engineering Design/ CAD personnel in the preparation of C&I data on process flow diagrams, P&IDs, hook-up drawings, installation details, equipment, material MTOs and all other associated design deliverables. Undertake Vendor review and pre-qualification, bid evaluations including commercial and technical clarifications, participation of vendor meetings and provide assistance in contracting strategy and C&I package deliverables. Ensure integrity, effectiveness, safety, robustness and fitness for purpose across the C&I design on consultancy, feasibility study, basic design, front-end engineering design, detailed design and as needed on EPC turn-key projects. Ensure work performed is carried out in accordance with the Penspen Group ISO 9001 Accredited Quality System, including ISO 14001 Environmental Procedures and ISO 18001 Health and Safety Procedures. Knowledge of COMAH compliance on instrumented systems. Conduct EC&I F.A.T. / S.A.T. and corresponding sign off. Knowledge and experience of fiscal metering desirable. G17 approver / appraiser highly desirable. Generic Create, check and approve project deliverables, as directed. Provide guidance and direction to engineers on the various tasks allocated to them by the Lead Engineer and Project Manager. Liaise directly with Clients Leads, as requested, on technical level to ensure their needs are being addressed. Assist Business Stream Management in preparing proposals by providing technical expertise in respective field. Cost control - good awareness of Project CTRs and the actual time spent creating, checking and approving project deliverables. Highlighting any potential project time overrun to the Project Lead. Work to improve efficiency and effectiveness of the design process. If you have the skills and can work in London office 3 days a week with your LTD Company please click the link to apply.
Penspen Ltd is seeking a Lead Controls & Instrumentation Engineer for a hybrid role based in London. The position requires 12 months of contract work, offering £70 per hour outside IR35. The ideal candidate should have specialized engineering experience in the Oil & Gas sector and a proven track record in high-profile projects. The successful candidate will lead engineering delivery, coordinate design and consultancy for Control & Instrumentation disciplines, and work closely with clients. Office attendance is required one day a week in Holborn, London. Interested applicants must have the right to live and work in the UK.
30/05/2026
Full time
Penspen Ltd is seeking a Lead Controls & Instrumentation Engineer for a hybrid role based in London. The position requires 12 months of contract work, offering £70 per hour outside IR35. The ideal candidate should have specialized engineering experience in the Oil & Gas sector and a proven track record in high-profile projects. The successful candidate will lead engineering delivery, coordinate design and consultancy for Control & Instrumentation disciplines, and work closely with clients. Office attendance is required one day a week in Holborn, London. Interested applicants must have the right to live and work in the UK.
Controls & Instrumentation Engineer UK LTD Company Contract Location: South East, UK - London EC1 or Aberdeen Salary: Circa £40 an hour, Competitive Rate depending on experience. Requirements: Applicants must have the right to live and work in the UK; have a Ltd Company and insurances ready to go. About Penspen Penspen is a leading global energy services company, delivering asset integrity, engineering, and consultancy services to the oil, gas, hydrogen, and energy infrastructure sectors. With over 70 years of experience, we help our clients design, maintain, and operate safe, reliable, and efficient assets across the world. Exciting times are ahead at Penspen as we continue to grow we require a Controls & Instrumentation Engineer. Questions for Applicants Are you a Controls & Instruments Engineer with a UK Ltd company and company insurances? Do you have proven specialised engineering work experience within the Oil & Gas Sector (Upstream, Downstream, Pipeline and Petrochemical industry)? Have you successfully executed numerous international high-profile engineering projects with UK & international clients? Main Purpose of Role To Lead across the Region on all Engineering delivery, Planning, Support to Operations, Project related co-ordination of Design, Engineering and Consultancy implementation of project work for Control & Instrumentation discipline. Responsible for assignments differing from a complex nature to short term consultancy support and advice to Clients and our Teams in the field, requiring comprehensive knowledge and skills in these combined disciplines. Can also undertake engineering effort in assigned area, including determination of new techniques to be used. Lead, direct, motivate, coach and develop engineers within discipline to attain their potential thus ensuring effective implementation of company strategic plans, making full use of ESD where possible. Consult with client to seek mutual understanding and agreement on the overall execution and major deliverables. Make recommendations concerning selection and training of staff. Responsibilities Technical Provide technical guidance to the Engineers/ Designers/ Technicians/ CAD and other associated personal within the C&I Dept. Develop full scope of projects at hand from Basic conceptual through FEED to Detailed Design, Procurement, Installation inspection, Testing, Pre-commissioning, Commissioning and as needed, Operational Engineering support. Understand Codes and Standards applicable to work carried out and raise deviations where necessary. Responsible for bidding, awarding, technical design and implementation of Automation & Control Systems, Supervisory Control and Data Acquisition (SCADA) Systems, Control Centres and Communication Networks. Promote good communication and co-ordination within respective teams, across other disciplines and Service lines and Regions, with ESD and current and/ or prospective customers. Responsible for completion of all assigned C&I design deliverables within a project team on projects associated with oil and gas pipelines and all associated facilities. Oversight in the preparation of MTOs, reports, specifications, data sheets, calculations and technical requisitions for all C&I scopes and provide support and guidance to fellow engineers as necessary to fully define the design requirements and equipment and services required in accordance with Company processes, procedures, work instructions, standards and current legislation. Participate in Project reviews, HAZOPs and Design Reviews, SIL Assessment & process/controls Safety Management. Provide technical direction and supervision of Engineering Design/ CAD personnel in the preparation of C&I data on process flow diagrams, P&IDs, hook-up drawings, installation details, equipment, material MTOs and all other associated design deliverables. Undertake Vendor review and pre-qualification, bid evaluations including commercial and technical clarifications, participation of vendor meetings and provide assistance in contracting strategy and C&I package deliverables. Ensure integrity, effectiveness, safety, robustness and fitness for purpose across the C&I design on consultancy, feasibility study, basic design, front-end engineering design, detailed design and as needed on EPC turn-key projects. Ensure work performed is carried out in accordance with the Penspen Group ISO 9001 Accredited Quality System, including ISO 14001 Environmental Procedures and ISO 18001 Health and Safety Procedures. Knowledge of COMAH compliance on instrumented systems. Conduct EC&I F.A.T. / S.A.T. and corresponding sign off. Knowledge and experience of fiscal metering desirable. G17 approver / appraiser highly desirable. Generic Create, check and approve project deliverables, as directed. Provide guidance and direction to engineers on the various tasks allocated to them by the Lead Engineer and Project Manager. Liaise directly with Clients Leads, as requested, on technical level to ensure their needs are being addressed. Assist Business Stream Management in preparing proposals by providing technical expertise in respective field. Cost control - good awareness of Project CTRs and the actual time spent creating, checking and approving project deliverables. Highlighting any potential project time overrun to the Project Lead. Work to improve efficiency and effectiveness of the design process. If you have the skills and can work in the Aberdeen or London office please click the link apply
21/05/2026
Full time
Controls & Instrumentation Engineer UK LTD Company Contract Location: South East, UK - London EC1 or Aberdeen Salary: Circa £40 an hour, Competitive Rate depending on experience. Requirements: Applicants must have the right to live and work in the UK; have a Ltd Company and insurances ready to go. About Penspen Penspen is a leading global energy services company, delivering asset integrity, engineering, and consultancy services to the oil, gas, hydrogen, and energy infrastructure sectors. With over 70 years of experience, we help our clients design, maintain, and operate safe, reliable, and efficient assets across the world. Exciting times are ahead at Penspen as we continue to grow we require a Controls & Instrumentation Engineer. Questions for Applicants Are you a Controls & Instruments Engineer with a UK Ltd company and company insurances? Do you have proven specialised engineering work experience within the Oil & Gas Sector (Upstream, Downstream, Pipeline and Petrochemical industry)? Have you successfully executed numerous international high-profile engineering projects with UK & international clients? Main Purpose of Role To Lead across the Region on all Engineering delivery, Planning, Support to Operations, Project related co-ordination of Design, Engineering and Consultancy implementation of project work for Control & Instrumentation discipline. Responsible for assignments differing from a complex nature to short term consultancy support and advice to Clients and our Teams in the field, requiring comprehensive knowledge and skills in these combined disciplines. Can also undertake engineering effort in assigned area, including determination of new techniques to be used. Lead, direct, motivate, coach and develop engineers within discipline to attain their potential thus ensuring effective implementation of company strategic plans, making full use of ESD where possible. Consult with client to seek mutual understanding and agreement on the overall execution and major deliverables. Make recommendations concerning selection and training of staff. Responsibilities Technical Provide technical guidance to the Engineers/ Designers/ Technicians/ CAD and other associated personal within the C&I Dept. Develop full scope of projects at hand from Basic conceptual through FEED to Detailed Design, Procurement, Installation inspection, Testing, Pre-commissioning, Commissioning and as needed, Operational Engineering support. Understand Codes and Standards applicable to work carried out and raise deviations where necessary. Responsible for bidding, awarding, technical design and implementation of Automation & Control Systems, Supervisory Control and Data Acquisition (SCADA) Systems, Control Centres and Communication Networks. Promote good communication and co-ordination within respective teams, across other disciplines and Service lines and Regions, with ESD and current and/ or prospective customers. Responsible for completion of all assigned C&I design deliverables within a project team on projects associated with oil and gas pipelines and all associated facilities. Oversight in the preparation of MTOs, reports, specifications, data sheets, calculations and technical requisitions for all C&I scopes and provide support and guidance to fellow engineers as necessary to fully define the design requirements and equipment and services required in accordance with Company processes, procedures, work instructions, standards and current legislation. Participate in Project reviews, HAZOPs and Design Reviews, SIL Assessment & process/controls Safety Management. Provide technical direction and supervision of Engineering Design/ CAD personnel in the preparation of C&I data on process flow diagrams, P&IDs, hook-up drawings, installation details, equipment, material MTOs and all other associated design deliverables. Undertake Vendor review and pre-qualification, bid evaluations including commercial and technical clarifications, participation of vendor meetings and provide assistance in contracting strategy and C&I package deliverables. Ensure integrity, effectiveness, safety, robustness and fitness for purpose across the C&I design on consultancy, feasibility study, basic design, front-end engineering design, detailed design and as needed on EPC turn-key projects. Ensure work performed is carried out in accordance with the Penspen Group ISO 9001 Accredited Quality System, including ISO 14001 Environmental Procedures and ISO 18001 Health and Safety Procedures. Knowledge of COMAH compliance on instrumented systems. Conduct EC&I F.A.T. / S.A.T. and corresponding sign off. Knowledge and experience of fiscal metering desirable. G17 approver / appraiser highly desirable. Generic Create, check and approve project deliverables, as directed. Provide guidance and direction to engineers on the various tasks allocated to them by the Lead Engineer and Project Manager. Liaise directly with Clients Leads, as requested, on technical level to ensure their needs are being addressed. Assist Business Stream Management in preparing proposals by providing technical expertise in respective field. Cost control - good awareness of Project CTRs and the actual time spent creating, checking and approving project deliverables. Highlighting any potential project time overrun to the Project Lead. Work to improve efficiency and effectiveness of the design process. If you have the skills and can work in the Aberdeen or London office please click the link apply
Controls & Instrumentation Engineer UK LTD Company Contract Location: South East, UK - London EC1 or Aberdeen Salary: Circa £40 an hour, Competitive Rate depending on experience. Requirements: Applicants must have the right to live and work in the UK; have a Ltd Company and insurances ready to go. About Penspen Penspen is a leading global energy services company, delivering asset integrity, engineering, and consultancy services to the oil, gas, hydrogen, and energy infrastructure sectors. With over 70 years of experience, we help our clients design, maintain, and operate safe, reliable, and efficient assets across the world. Exciting times are ahead at Penspen as we continue to grow we require a Controls & Instrumentation Engineer. Questions for Applicants Are you a Controls & Instruments Engineer with a UK Ltd company and company insurances? Do you have proven specialised engineering work experience within the Oil & Gas Sector (Upstream, Downstream, Pipeline and Petrochemical industry)? Have you successfully executed numerous international high-profile engineering projects with UK & international clients? Main Purpose of Role To Lead across the Region on all Engineering delivery, Planning, Support to Operations, Project related co-ordination of Design, Engineering and Consultancy implementation of project work for Control & Instrumentation discipline. Responsible for assignments differing from a complex nature to short term consultancy support and advice to Clients and our Teams in the field, requiring comprehensive knowledge and skills in these combined disciplines. Can also undertake engineering effort in assigned area, including determination of new techniques to be used. Lead, direct, motivate, coach and develop engineers within discipline to attain their potential thus ensuring effective implementation of company strategic plans, making full use of ESD where possible. Consult with client to seek mutual understanding and agreement on the overall execution and major deliverables. Make recommendations concerning selection and training of staff. Responsibilities Technical Provide technical guidance to the Engineers/ Designers/ Technicians/ CAD and other associated personal within the C&I Dept. Develop full scope of projects at hand from Basic conceptual through FEED to Detailed Design, Procurement, Installation inspection, Testing, Pre-commissioning, Commissioning and as needed, Operational Engineering support. Understand Codes and Standards applicable to work carried out and raise deviations where necessary. Responsible for bidding, awarding, technical design and implementation of Automation & Control Systems, Supervisory Control and Data Acquisition (SCADA) Systems, Control Centres and Communication Networks. Promote good communication and co-ordination within respective teams, across other disciplines and Service lines and Regions, with ESD and current and/ or prospective customers. Responsible for completion of all assigned C&I design deliverables within a project team on projects associated with oil and gas pipelines and all associated facilities. Oversight in the preparation of MTOs, reports, specifications, data sheets, calculations and technical requisitions for all C&I scopes and provide support and guidance to fellow engineers as necessary to fully define the design requirements and equipment and services required in accordance with Company processes, procedures, work instructions, standards and current legislation. Participate in Project reviews, HAZOPs and Design Reviews, SIL Assessment & process/controls Safety Management. Provide technical direction and supervision of Engineering Design/ CAD personnel in the preparation of C&I data on process flow diagrams, P&IDs, hook-up drawings, installation details, equipment, material MTOs and all other associated design deliverables. Undertake Vendor review and pre-qualification, bid evaluations including commercial and technical clarifications, participation of vendor meetings and provide assistance in contracting strategy and C&I package deliverables. Ensure integrity, effectiveness, safety, robustness and fitness for purpose across the C&I design on consultancy, feasibility study, basic design, front-end engineering design, detailed design and as needed on EPC turn-key projects. Ensure work performed is carried out in accordance with the Penspen Group ISO 9001 Accredited Quality System, including ISO 14001 Environmental Procedures and ISO 18001 Health and Safety Procedures. Knowledge of COMAH compliance on instrumented systems. Conduct EC&I F.A.T. / S.A.T. and corresponding sign off. Knowledge and experience of fiscal metering desirable. G17 approver / appraiser highly desirable. Generic Create, check and approve project deliverables, as directed. Provide guidance and direction to engineers on the various tasks allocated to them by the Lead Engineer and Project Manager. Liaise directly with Clients Leads, as requested, on technical level to ensure their needs are being addressed. Assist Business Stream Management in preparing proposals by providing technical expertise in respective field. Cost control - good awareness of Project CTRs and the actual time spent creating, checking and approving project deliverables. Highlighting any potential project time overrun to the Project Lead. Work to improve efficiency and effectiveness of the design process. If you have the skills and can work in the Aberdeen or London office please click the link apply
21/05/2026
Full time
Controls & Instrumentation Engineer UK LTD Company Contract Location: South East, UK - London EC1 or Aberdeen Salary: Circa £40 an hour, Competitive Rate depending on experience. Requirements: Applicants must have the right to live and work in the UK; have a Ltd Company and insurances ready to go. About Penspen Penspen is a leading global energy services company, delivering asset integrity, engineering, and consultancy services to the oil, gas, hydrogen, and energy infrastructure sectors. With over 70 years of experience, we help our clients design, maintain, and operate safe, reliable, and efficient assets across the world. Exciting times are ahead at Penspen as we continue to grow we require a Controls & Instrumentation Engineer. Questions for Applicants Are you a Controls & Instruments Engineer with a UK Ltd company and company insurances? Do you have proven specialised engineering work experience within the Oil & Gas Sector (Upstream, Downstream, Pipeline and Petrochemical industry)? Have you successfully executed numerous international high-profile engineering projects with UK & international clients? Main Purpose of Role To Lead across the Region on all Engineering delivery, Planning, Support to Operations, Project related co-ordination of Design, Engineering and Consultancy implementation of project work for Control & Instrumentation discipline. Responsible for assignments differing from a complex nature to short term consultancy support and advice to Clients and our Teams in the field, requiring comprehensive knowledge and skills in these combined disciplines. Can also undertake engineering effort in assigned area, including determination of new techniques to be used. Lead, direct, motivate, coach and develop engineers within discipline to attain their potential thus ensuring effective implementation of company strategic plans, making full use of ESD where possible. Consult with client to seek mutual understanding and agreement on the overall execution and major deliverables. Make recommendations concerning selection and training of staff. Responsibilities Technical Provide technical guidance to the Engineers/ Designers/ Technicians/ CAD and other associated personal within the C&I Dept. Develop full scope of projects at hand from Basic conceptual through FEED to Detailed Design, Procurement, Installation inspection, Testing, Pre-commissioning, Commissioning and as needed, Operational Engineering support. Understand Codes and Standards applicable to work carried out and raise deviations where necessary. Responsible for bidding, awarding, technical design and implementation of Automation & Control Systems, Supervisory Control and Data Acquisition (SCADA) Systems, Control Centres and Communication Networks. Promote good communication and co-ordination within respective teams, across other disciplines and Service lines and Regions, with ESD and current and/ or prospective customers. Responsible for completion of all assigned C&I design deliverables within a project team on projects associated with oil and gas pipelines and all associated facilities. Oversight in the preparation of MTOs, reports, specifications, data sheets, calculations and technical requisitions for all C&I scopes and provide support and guidance to fellow engineers as necessary to fully define the design requirements and equipment and services required in accordance with Company processes, procedures, work instructions, standards and current legislation. Participate in Project reviews, HAZOPs and Design Reviews, SIL Assessment & process/controls Safety Management. Provide technical direction and supervision of Engineering Design/ CAD personnel in the preparation of C&I data on process flow diagrams, P&IDs, hook-up drawings, installation details, equipment, material MTOs and all other associated design deliverables. Undertake Vendor review and pre-qualification, bid evaluations including commercial and technical clarifications, participation of vendor meetings and provide assistance in contracting strategy and C&I package deliverables. Ensure integrity, effectiveness, safety, robustness and fitness for purpose across the C&I design on consultancy, feasibility study, basic design, front-end engineering design, detailed design and as needed on EPC turn-key projects. Ensure work performed is carried out in accordance with the Penspen Group ISO 9001 Accredited Quality System, including ISO 14001 Environmental Procedures and ISO 18001 Health and Safety Procedures. Knowledge of COMAH compliance on instrumented systems. Conduct EC&I F.A.T. / S.A.T. and corresponding sign off. Knowledge and experience of fiscal metering desirable. G17 approver / appraiser highly desirable. Generic Create, check and approve project deliverables, as directed. Provide guidance and direction to engineers on the various tasks allocated to them by the Lead Engineer and Project Manager. Liaise directly with Clients Leads, as requested, on technical level to ensure their needs are being addressed. Assist Business Stream Management in preparing proposals by providing technical expertise in respective field. Cost control - good awareness of Project CTRs and the actual time spent creating, checking and approving project deliverables. Highlighting any potential project time overrun to the Project Lead. Work to improve efficiency and effectiveness of the design process. If you have the skills and can work in the Aberdeen or London office please click the link apply
Penspen Ltd is seeking a Controls & Instrumentation Engineer for leading project delivery in the Oil & Gas sector. This role involves technical guidance for engineering teams in the London or Aberdeen office, focusing on comprehensive design and implementation of Control & Instrumentation systems. Applicants should have a proven track record of engineering work experience and the necessary company insurance. Competitive hourly rates are available for suitable candidates.
21/05/2026
Full time
Penspen Ltd is seeking a Controls & Instrumentation Engineer for leading project delivery in the Oil & Gas sector. This role involves technical guidance for engineering teams in the London or Aberdeen office, focusing on comprehensive design and implementation of Control & Instrumentation systems. Applicants should have a proven track record of engineering work experience and the necessary company insurance. Competitive hourly rates are available for suitable candidates.
Penspen Ltd is seeking a Controls & Instrumentation Engineer for leading project delivery in the Oil & Gas sector. This role involves technical guidance for engineering teams in the London or Aberdeen office, focusing on comprehensive design and implementation of Control & Instrumentation systems. Applicants should have a proven track record of engineering work experience and the necessary company insurance. Competitive hourly rates are available for suitable candidates.
21/05/2026
Full time
Penspen Ltd is seeking a Controls & Instrumentation Engineer for leading project delivery in the Oil & Gas sector. This role involves technical guidance for engineering teams in the London or Aberdeen office, focusing on comprehensive design and implementation of Control & Instrumentation systems. Applicants should have a proven track record of engineering work experience and the necessary company insurance. Competitive hourly rates are available for suitable candidates.