Our client has an opportunity for a Technical Support Engineer to join them on a contract basis until November 2026. You will be providing an E2E perspective at the shopfloor level within the production team. Role : Technical Support Engineer Location : Broughton, Flintshire - fully onsite Hours : 35 per week Hourly Rate : 36.00 per hour via Umbrella, inside IR35 Clearance : BPSS required to start What you'll be doing: Daily / on shift line side support to manage technical issues & continuous improvement: missing parts, non-conformities, concessions if applicable / DQN, Outstanding Work, maintenance, jigs & tools. Perform Work Order Management for out of cycle work. Escalate recurrent issues & request support to the Work Prep, PPE, Maintenance, MAP & Outstanding Work support functions roles, if not manageable at level 1 Support capacity management: anticipate capacity fluctuation to cover changes in the PLC (product life cycle situation) and grow competence. Support on identifying issues in production as well as problems not solvable by the FLM and operators and escalate/request support to the Work Prep (PE), Line Balancing (PPE), Maintenance, MAP & OSW or support function roles. Support of the analysis of the industrial systems and processes to assess their efficiency and effectiveness. Support on continuous work improvement as well as on the elimination of waste (LEAN). Industrial Assets-Daily / on shift line side, support on industrial assets: Support on the request for repair and the creation of specific requests for small tools. Support on writing the specification for the creation of new jigs and tools as well as the modification or improvement of existing jigs and tools and their calibration. Work order management-Daily / on shift line side, support on work order management: Support on flagging blocked work orders so that it can be discussed at the appropriate meetings Further support is given to the Production to prioritize the Execution of the Serial and Rework Work Order if linked to NC, Concession or Blocking Point. Environment, Health and safety-Daily / on shift line side, support on "EHS": Support on making EH&S rules transparent on the shopfloor. Support on ensuring EH&S standards are applied on the station. Support on cascading the EH&S requirements to the shopfloor. Support on identifying and solving Near Misses. Quality-Daily / on shift line side, support on "Quality": Support in ensuring that production processes and standards are applied on the station. Support in ensuring that quality standards are applied on the station. Logistics -Daily / on shift line side, support on "Logistics": Support the prioritization of pulling materials related to Rework Work Order to the respective executing station. Requirements : Extensive experience in a manufacturing environment An innovative approach; looks for new ways of doing things Strong practical problem-solving ability Systematic and organized approach Flexible to changing customer needs Teamwork Analytical Stakeholder Management Lean Manufacturing Customer Focused SAP experience If you are interested in applying for this position and you meet the requirements, please apply! Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best known companies who demand the highest standard of applicants. " on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at anytime! Thank you for your follow!"
28/10/2025
Contractor
Our client has an opportunity for a Technical Support Engineer to join them on a contract basis until November 2026. You will be providing an E2E perspective at the shopfloor level within the production team. Role : Technical Support Engineer Location : Broughton, Flintshire - fully onsite Hours : 35 per week Hourly Rate : 36.00 per hour via Umbrella, inside IR35 Clearance : BPSS required to start What you'll be doing: Daily / on shift line side support to manage technical issues & continuous improvement: missing parts, non-conformities, concessions if applicable / DQN, Outstanding Work, maintenance, jigs & tools. Perform Work Order Management for out of cycle work. Escalate recurrent issues & request support to the Work Prep, PPE, Maintenance, MAP & Outstanding Work support functions roles, if not manageable at level 1 Support capacity management: anticipate capacity fluctuation to cover changes in the PLC (product life cycle situation) and grow competence. Support on identifying issues in production as well as problems not solvable by the FLM and operators and escalate/request support to the Work Prep (PE), Line Balancing (PPE), Maintenance, MAP & OSW or support function roles. Support of the analysis of the industrial systems and processes to assess their efficiency and effectiveness. Support on continuous work improvement as well as on the elimination of waste (LEAN). Industrial Assets-Daily / on shift line side, support on industrial assets: Support on the request for repair and the creation of specific requests for small tools. Support on writing the specification for the creation of new jigs and tools as well as the modification or improvement of existing jigs and tools and their calibration. Work order management-Daily / on shift line side, support on work order management: Support on flagging blocked work orders so that it can be discussed at the appropriate meetings Further support is given to the Production to prioritize the Execution of the Serial and Rework Work Order if linked to NC, Concession or Blocking Point. Environment, Health and safety-Daily / on shift line side, support on "EHS": Support on making EH&S rules transparent on the shopfloor. Support on ensuring EH&S standards are applied on the station. Support on cascading the EH&S requirements to the shopfloor. Support on identifying and solving Near Misses. Quality-Daily / on shift line side, support on "Quality": Support in ensuring that production processes and standards are applied on the station. Support in ensuring that quality standards are applied on the station. Logistics -Daily / on shift line side, support on "Logistics": Support the prioritization of pulling materials related to Rework Work Order to the respective executing station. Requirements : Extensive experience in a manufacturing environment An innovative approach; looks for new ways of doing things Strong practical problem-solving ability Systematic and organized approach Flexible to changing customer needs Teamwork Analytical Stakeholder Management Lean Manufacturing Customer Focused SAP experience If you are interested in applying for this position and you meet the requirements, please apply! Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best known companies who demand the highest standard of applicants. " on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at anytime! Thank you for your follow!"
Our client has an opportunity for an interim Communications Lead to join them on a contract basis. You will be working closely with a project team, wider communications teas and leaders of the new company to support all communication-related matters. Role : Interim Communications Lead Location : Broughton, Flintshire - 60% onsite as a minimum Hours : 35 per week Hourly Rate : 39.98 per hour via Umbrella, inside IR35 Clearance : BPSS required to start Contract : 6 months from start This role will involve regular travel to Belfast What you'll be doing: Plays a key role in the establishment of Communications "set up" and outputs for the Newco in Belfast, bringing local needs into alignment with communications approach in the UK as appropriate. Supports the creation of interim and long-term internal communications tools and channels to support the onboarding of colleagues Works with the project team to define and deliver key messaging and communications materials during the transition phase Interacts with wider UK and global communications team - and the public affairs team - to manage consistent messaging to external audiences Requirements : Established experience in communications (internal, external, community relations) Experience of M&A comms environment, transformation and change Good understanding of the company structure, its products and the environment in the UK Good understanding of Northern Ireland as an operating environment Comms plan definition and execution Strategic thinking while able to act and implement quickly Ability to connect easily to different stakeholders across functions and divisions Excellent writing skills and content creation skills Event management capability Understanding of local UK media and ability to engage effectively with them Understanding of community relations and ability to engage effectively with a wide range of neighbours Understanding of internal communications channels and ability to effectively engage with colleagues from across the business If you are interested in applying for this position and you meet the requirements, please immediately! Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best-known companies who demand the highest standard of applicants. " on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at anytime! Thank you for your follow!"
28/10/2025
Contractor
Our client has an opportunity for an interim Communications Lead to join them on a contract basis. You will be working closely with a project team, wider communications teas and leaders of the new company to support all communication-related matters. Role : Interim Communications Lead Location : Broughton, Flintshire - 60% onsite as a minimum Hours : 35 per week Hourly Rate : 39.98 per hour via Umbrella, inside IR35 Clearance : BPSS required to start Contract : 6 months from start This role will involve regular travel to Belfast What you'll be doing: Plays a key role in the establishment of Communications "set up" and outputs for the Newco in Belfast, bringing local needs into alignment with communications approach in the UK as appropriate. Supports the creation of interim and long-term internal communications tools and channels to support the onboarding of colleagues Works with the project team to define and deliver key messaging and communications materials during the transition phase Interacts with wider UK and global communications team - and the public affairs team - to manage consistent messaging to external audiences Requirements : Established experience in communications (internal, external, community relations) Experience of M&A comms environment, transformation and change Good understanding of the company structure, its products and the environment in the UK Good understanding of Northern Ireland as an operating environment Comms plan definition and execution Strategic thinking while able to act and implement quickly Ability to connect easily to different stakeholders across functions and divisions Excellent writing skills and content creation skills Event management capability Understanding of local UK media and ability to engage effectively with them Understanding of community relations and ability to engage effectively with a wide range of neighbours Understanding of internal communications channels and ability to effectively engage with colleagues from across the business If you are interested in applying for this position and you meet the requirements, please immediately! Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best-known companies who demand the highest standard of applicants. " on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at anytime! Thank you for your follow!"
Our client has an opportunity for a Production Test Engineer - Electronics to join them on a contract basis for 12 months. You will play a vital role in supporting testing and diagnostics of electrical/electronic sub-systems and circuit cards during the production phase of the product lifecycle. Role : Production Test Engineer Location : Stevenage, fully onsite Hours : 37 per week Clearance : full SC required to start - UKEO due to project Hourly Rate : 32- 36 per hour via Umbrella, inside IR35 What you'll be doing: You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment, carrying out the following: Providing test engineering support to operators on the shopfloor, including supporting the introduction of new test equipment. Testing and diagnosing complex electrical/electronic systems, sub-assemblies and circuit cards down to component level. Generating test specifications, operator instructions and technical reports - based on higher-level requirements and information. Promptly identifying remedial and corrective actions to allow Manufacturing to continue in line with the programme, following production test failures. Supporting meetings with Quality and Operations to provide status updates on Test Engineering actions and investigations. Requirements: Essential: Minimum HNC level of Engineering qualifications or equivalent & ability to provide certificates. Good understanding of digital and analogue electronic measurement and test principles, and fault diagnosis techniques, with demonstrable experience down to component level. Awareness of electrical/electronic sub-system and system design, integration and test principles. Good verbal and written communication skills, including generation of test specifications, operator instructions and technical reports. Ability to plan and organise one's work according to assigned priorities. Advantageous: Knowledge of RF and Microwave technology at the subsystem level. Experience in operating manual and automated test equipment in an Electronics Manufacturing environment. If you are interested in applying for this position and you meet the requirements, please apply! Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best known companies who demand the highest standard of applicants. " on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at anytime! Thank you for your follow!"
20/10/2025
Contractor
Our client has an opportunity for a Production Test Engineer - Electronics to join them on a contract basis for 12 months. You will play a vital role in supporting testing and diagnostics of electrical/electronic sub-systems and circuit cards during the production phase of the product lifecycle. Role : Production Test Engineer Location : Stevenage, fully onsite Hours : 37 per week Clearance : full SC required to start - UKEO due to project Hourly Rate : 32- 36 per hour via Umbrella, inside IR35 What you'll be doing: You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment, carrying out the following: Providing test engineering support to operators on the shopfloor, including supporting the introduction of new test equipment. Testing and diagnosing complex electrical/electronic systems, sub-assemblies and circuit cards down to component level. Generating test specifications, operator instructions and technical reports - based on higher-level requirements and information. Promptly identifying remedial and corrective actions to allow Manufacturing to continue in line with the programme, following production test failures. Supporting meetings with Quality and Operations to provide status updates on Test Engineering actions and investigations. Requirements: Essential: Minimum HNC level of Engineering qualifications or equivalent & ability to provide certificates. Good understanding of digital and analogue electronic measurement and test principles, and fault diagnosis techniques, with demonstrable experience down to component level. Awareness of electrical/electronic sub-system and system design, integration and test principles. Good verbal and written communication skills, including generation of test specifications, operator instructions and technical reports. Ability to plan and organise one's work according to assigned priorities. Advantageous: Knowledge of RF and Microwave technology at the subsystem level. Experience in operating manual and automated test equipment in an Electronics Manufacturing environment. If you are interested in applying for this position and you meet the requirements, please apply! Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best known companies who demand the highest standard of applicants. " on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at anytime! Thank you for your follow!"
On behalf of our client, we are seeking to recruit a Data Analyst to join my client on an initial 12-month contract. As the Data Analyst you will be leveraging data to optimize our low-volume production processes for complex defence electronics, ensuring the highest standards of quality and efficiency. Role: Data Analyst Pay 75 per hour via Umbrella Location: Bolton Contract: Monday- Friday, 37 Hours per week, 12 Months Contract IR35 Status: Inside Security Clearance : Security Clearance to start, UK Eyes only project Responsibilities Analysing complex datasets from various stages of the electronics production lifecycle. Identifying trends, anomalies, and areas for improvement in manufacturing processes, test results, and supply chain data. Developing and implementing data-driven solutions to enhance production efficiency, reduce waste, and improve product reliability. Collaborating with electronics engineers, production teams, and quality assurance specialists to translate data insights into actionable improvements. Designing and creating compelling dashboards and reports to communicate complex data findings to technical and non-technical stakeholders effectively. Proactively seeking opportunities to enhance data collection methods, tools, and overall data management practices within our low-volume production environment. Contributing to the development and implementation of robust performance measurement frameworks across various production areas. Potentially guiding and mentoring junior members of the data analysis team. Essential Skills: Experience in data analysis Electronic Engineering background Experience working in Manufacturing environment If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best known companies who demand the highest standard of applicants. " on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at anytime! Thank you for your follow!"
17/10/2025
Contractor
On behalf of our client, we are seeking to recruit a Data Analyst to join my client on an initial 12-month contract. As the Data Analyst you will be leveraging data to optimize our low-volume production processes for complex defence electronics, ensuring the highest standards of quality and efficiency. Role: Data Analyst Pay 75 per hour via Umbrella Location: Bolton Contract: Monday- Friday, 37 Hours per week, 12 Months Contract IR35 Status: Inside Security Clearance : Security Clearance to start, UK Eyes only project Responsibilities Analysing complex datasets from various stages of the electronics production lifecycle. Identifying trends, anomalies, and areas for improvement in manufacturing processes, test results, and supply chain data. Developing and implementing data-driven solutions to enhance production efficiency, reduce waste, and improve product reliability. Collaborating with electronics engineers, production teams, and quality assurance specialists to translate data insights into actionable improvements. Designing and creating compelling dashboards and reports to communicate complex data findings to technical and non-technical stakeholders effectively. Proactively seeking opportunities to enhance data collection methods, tools, and overall data management practices within our low-volume production environment. Contributing to the development and implementation of robust performance measurement frameworks across various production areas. Potentially guiding and mentoring junior members of the data analysis team. Essential Skills: Experience in data analysis Electronic Engineering background Experience working in Manufacturing environment If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best known companies who demand the highest standard of applicants. " on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at anytime! Thank you for your follow!"
We are recruiting a Satellite AIT Electrical Systems Engineer on behalf of our client for an initial 12-month contract. In this role, your primary responsibilities will include preparing test procedures, developing and debugging test sequences for satellite system testing during ambient and environmental test campaigns. You will also be tasked with preparing, troubleshooting, and executing complex test sequences on flight spacecraft and test benches. Role: Satellite AIT Electrical Systems Engineer Pay: 55 per hour (Via Umbrella) Contract: Monday - Friday, 37 hours per week, 12-month contract Location: Stevenage IR35 Status: Inside SC Clearance: SC Cleared Responsibilities Interpretation of electrical and functional test requirements from test specifications Provide test solutions to meet the test specification requirements, from planning and kick-off meeting, through test sequence coding, procedure preparation and debug to execution. Provide first-line support to the test operations team executing tests on the flight spacecraft in the event of anomalies. Close out tests with Post Test Review and Test Report To provide technical inputs to project test reviews (Test Readiness Reviews, Post Test Reviews, Test Review Boards and Non-Conformance Review Boards) Development and debug of Automatic Test procedures (ATP) using a bespoke high-level S/W language (Open Center checkout system based on the Elisa language and Open Center Bridge based on JAVA) to test the spacecraft systems Preparing and executing spacecraft system investigations in line with actions from Non-Conformance Review Boards (NRBs). Support Spacecraft systems functional and performance tests during environmental test (TVAC, Magnetic, EMC), functional and performance tests Work to company and departmental procedures and maintain adherence to company standards Essential Experience Minimum of a degree in an Electrical Engineering related discipline or relevant experience in a similar role for 5+ year Current hands-on experience of writing test sequences/scripts for execution of spacecraft tests from the Central Checkout System (CCS). Knowledge of Elisa and JAVA would be an advantage. Working knowledge of TMTC Databases. Spacecraft systems and subsystem technical knowledge and awareness is essential, e.g. Data Handling, Packet Utilisation Standard, Data Bus Communications - 1553, Spacewire, Attitude &, Orbital Control, Star Trackers, Gyros, Momentum Wheels, power systems, batteries, Solar Arrays, Thermal Control, heaters, thermostats, FDIR, Spacecraft Configuration Vectors etc. Programming and scripting languages, particularly writing and debugging Linux/Unix bash scripts is an advantage. Knowledge of a programming language such as C, Java, python, TCL, VBA would be useful but not essential. Competent in the use of various test equipment used for electrical measurements, e.g. DMM, oscilloscope, current probes, Data acquisition unit, data bus monitors (1553 MilBus and SpaceWire probes/analysers) would be an advantage. Spacecraft electrical and harness knowledge would be an advantage but not essential. Familiar with the Windows and Linux operating systems. Awareness of 'cleanroom' disciplines. Knowledge of system testing & Verification. Willing to support shifts/flexible working as required. Writing test sequences/scripts for execution of spacecraft systems tests including FDIR from the Central Checkout System (CCS). Electrical/Spacecraft Systems fault investigation and test sequence debug. Environmental and launch test campaigns. Preparing test procedure and sequences from test specifications, writing test reports and supporting test and non - conformance reviews. Electrical integration of equipment on a test bench or spacecraft (desirable, not essential) If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation is a specialist aviation and aerospace recruitment company that has been operating all over the world for more than 30 years. We work with some of the industry's best-known companies and pride ourselves with working to the highest standard of service supported by an ingrained culture of honesty and integrity. " on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at anytime! Thank you for your follow!"
17/10/2025
Contractor
We are recruiting a Satellite AIT Electrical Systems Engineer on behalf of our client for an initial 12-month contract. In this role, your primary responsibilities will include preparing test procedures, developing and debugging test sequences for satellite system testing during ambient and environmental test campaigns. You will also be tasked with preparing, troubleshooting, and executing complex test sequences on flight spacecraft and test benches. Role: Satellite AIT Electrical Systems Engineer Pay: 55 per hour (Via Umbrella) Contract: Monday - Friday, 37 hours per week, 12-month contract Location: Stevenage IR35 Status: Inside SC Clearance: SC Cleared Responsibilities Interpretation of electrical and functional test requirements from test specifications Provide test solutions to meet the test specification requirements, from planning and kick-off meeting, through test sequence coding, procedure preparation and debug to execution. Provide first-line support to the test operations team executing tests on the flight spacecraft in the event of anomalies. Close out tests with Post Test Review and Test Report To provide technical inputs to project test reviews (Test Readiness Reviews, Post Test Reviews, Test Review Boards and Non-Conformance Review Boards) Development and debug of Automatic Test procedures (ATP) using a bespoke high-level S/W language (Open Center checkout system based on the Elisa language and Open Center Bridge based on JAVA) to test the spacecraft systems Preparing and executing spacecraft system investigations in line with actions from Non-Conformance Review Boards (NRBs). Support Spacecraft systems functional and performance tests during environmental test (TVAC, Magnetic, EMC), functional and performance tests Work to company and departmental procedures and maintain adherence to company standards Essential Experience Minimum of a degree in an Electrical Engineering related discipline or relevant experience in a similar role for 5+ year Current hands-on experience of writing test sequences/scripts for execution of spacecraft tests from the Central Checkout System (CCS). Knowledge of Elisa and JAVA would be an advantage. Working knowledge of TMTC Databases. Spacecraft systems and subsystem technical knowledge and awareness is essential, e.g. Data Handling, Packet Utilisation Standard, Data Bus Communications - 1553, Spacewire, Attitude &, Orbital Control, Star Trackers, Gyros, Momentum Wheels, power systems, batteries, Solar Arrays, Thermal Control, heaters, thermostats, FDIR, Spacecraft Configuration Vectors etc. Programming and scripting languages, particularly writing and debugging Linux/Unix bash scripts is an advantage. Knowledge of a programming language such as C, Java, python, TCL, VBA would be useful but not essential. Competent in the use of various test equipment used for electrical measurements, e.g. DMM, oscilloscope, current probes, Data acquisition unit, data bus monitors (1553 MilBus and SpaceWire probes/analysers) would be an advantage. Spacecraft electrical and harness knowledge would be an advantage but not essential. Familiar with the Windows and Linux operating systems. Awareness of 'cleanroom' disciplines. Knowledge of system testing & Verification. Willing to support shifts/flexible working as required. Writing test sequences/scripts for execution of spacecraft systems tests including FDIR from the Central Checkout System (CCS). Electrical/Spacecraft Systems fault investigation and test sequence debug. Environmental and launch test campaigns. Preparing test procedure and sequences from test specifications, writing test reports and supporting test and non - conformance reviews. Electrical integration of equipment on a test bench or spacecraft (desirable, not essential) If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation is a specialist aviation and aerospace recruitment company that has been operating all over the world for more than 30 years. We work with some of the industry's best-known companies and pride ourselves with working to the highest standard of service supported by an ingrained culture of honesty and integrity. " on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at anytime! Thank you for your follow!"
An opportunity has arisen with my client for an Digital Design Engineer to join them on a 12 -month contract. As Digital Design Engineer you will support the Technical Lead/Architect in collaboration with the systems, software, firmware, mechanical and production teams to specify elegant and optimised solutions that satisfy customer needs. Once the specification has been agreed, you will be responsible for the detailed design of the high-speed digital aspects as well as leading all the other electronics design activity through the full product development lifecycle. Role: Digital Design Engineer Pay: 70 - 80 per hour via Umbrella Company Location: Stevenage Contract: 12 Months Hours: Monday - Friday, 37 hours per week Security Clearance: Security Cleared required before starting Skills/Experince Experience in complex, high speed digital electronics design. Experience in MPSoC FGPA, DDR and Flash memory and high-speed serial interconnect design Experience in SI and PI Analysis Proficiency in VHDL to support board level test and debug Proficiency in C, C++, or Python to support board level test and debug Familiarity with DSP concepts for SDR, radar signal processing and optical sensors Ability to develop elegant hardware architectures through detailed understanding and collaboration with systems, software, firmware, mechanical and production teams Strong academic background to support this intellectually demanding role Strong desire to drive collaboration and ensure successful delivery. Excellent ability to configure and document designs to a high professional standard. If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best-known companies who demand the highest standard of applicants. " on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at anytime! Thank you for your follow!"
03/10/2025
Contractor
An opportunity has arisen with my client for an Digital Design Engineer to join them on a 12 -month contract. As Digital Design Engineer you will support the Technical Lead/Architect in collaboration with the systems, software, firmware, mechanical and production teams to specify elegant and optimised solutions that satisfy customer needs. Once the specification has been agreed, you will be responsible for the detailed design of the high-speed digital aspects as well as leading all the other electronics design activity through the full product development lifecycle. Role: Digital Design Engineer Pay: 70 - 80 per hour via Umbrella Company Location: Stevenage Contract: 12 Months Hours: Monday - Friday, 37 hours per week Security Clearance: Security Cleared required before starting Skills/Experince Experience in complex, high speed digital electronics design. Experience in MPSoC FGPA, DDR and Flash memory and high-speed serial interconnect design Experience in SI and PI Analysis Proficiency in VHDL to support board level test and debug Proficiency in C, C++, or Python to support board level test and debug Familiarity with DSP concepts for SDR, radar signal processing and optical sensors Ability to develop elegant hardware architectures through detailed understanding and collaboration with systems, software, firmware, mechanical and production teams Strong academic background to support this intellectually demanding role Strong desire to drive collaboration and ensure successful delivery. Excellent ability to configure and document designs to a high professional standard. If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best-known companies who demand the highest standard of applicants. " on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at anytime! Thank you for your follow!"
Our client has an opportunity for an SAP Time Functional Consultant to join them on a contract basis until October 2026. You will be responsible for the design, configuration, implementation, and support of the SAP Time Management (PT) module. Role : SAP Time Functional Consultant Location : Broughton, Flintshire - 3 days onsite as a minimum Hours : 35 hours Clearance : BPSS required to start Hourly Rate : Up to 86.00 per hour via Umbrella, inside IR35 What you'll be doing: Business Requirements: Gather, analyse, and document business requirements from stakeholders related to time and attendance processes, including working time, absences, overtime, and shift planning. System Configuration: Design and configure SAP Time Management (PT) solutions, including time schemas (PE01), time rules (PE02), time types, absence types, work schedules, and public holiday calendars. Integration: Ensure seamless integration of the SAP Time Management module with other SAP modules, particularly SAP Payroll (PY), Organizational Management (OM), and Personnel Administration (PA). Solution Design: Develop comprehensive functional specifications for custom developments, enhancements, and reports, and work closely with ABAP developers to ensure accurate implementation. Testing: Conduct and support various testing phases, including unit testing, integration testing, and user acceptance testing (UAT), and manage defect resolution. Documentation: Create and maintain detailed system documentation, configuration guides, process flows, and end-user training materials. Support & Training: Provide post-go-live support, troubleshoot system issues, and conduct end-user training to ensure effective system adoption. Continuous Improvement: Proactively identify opportunities for process and system improvements, staying up to date with SAP best practices and new technologies. Requirements : Experience: Proven experience as a SAP Functional Consultant, with a strong focus on SAP Time Management (PT) and at least 5 years of hands-on experience in configuration and implementation. Technical Skills: In-depth knowledge of SAP Time Management processes, including positive and negative time recording, time evaluation, and time data integration. Configuration: Expertise in configuring time schemas and rules, as well as work schedules, public holiday calendars, and different types of attendances and absences. Integration: Solid understanding of the integration points between SAP Time Management and other SAP HCM modules, especially SAP Payroll. Problem-Solving: Excellent analytical and problem-solving skills, with the ability to translate complex business requirements into technical solutions. Communication: Strong interpersonal and communication skills, with the ability to effectively communicate with stakeholders at all levels, from end-users to senior management. Project Lifecycle: Experience working on at least two full-cycle SAP implementation projects. Preferred Qualifications: SAP Time Management Certification Experience with SAP HANA Time Management. Familiarity with xAtlas or other third-party time management systems. Experience in a similar industry. Project management or team leadership experience. If you are interested in applying for this position and you meet the requirements, please apply immediately! Line Up Aviation is a specialist aviation and aerospace recruitment company that has been operating all over the world for more than 30 years. We work with some of the industry's best-known companies and pride ourselves with working to the highest standard of service supported by an ingrained culture of honesty and integrity. " on Twitter for all our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at any time! Thank you for your follow!"
02/10/2025
Contractor
Our client has an opportunity for an SAP Time Functional Consultant to join them on a contract basis until October 2026. You will be responsible for the design, configuration, implementation, and support of the SAP Time Management (PT) module. Role : SAP Time Functional Consultant Location : Broughton, Flintshire - 3 days onsite as a minimum Hours : 35 hours Clearance : BPSS required to start Hourly Rate : Up to 86.00 per hour via Umbrella, inside IR35 What you'll be doing: Business Requirements: Gather, analyse, and document business requirements from stakeholders related to time and attendance processes, including working time, absences, overtime, and shift planning. System Configuration: Design and configure SAP Time Management (PT) solutions, including time schemas (PE01), time rules (PE02), time types, absence types, work schedules, and public holiday calendars. Integration: Ensure seamless integration of the SAP Time Management module with other SAP modules, particularly SAP Payroll (PY), Organizational Management (OM), and Personnel Administration (PA). Solution Design: Develop comprehensive functional specifications for custom developments, enhancements, and reports, and work closely with ABAP developers to ensure accurate implementation. Testing: Conduct and support various testing phases, including unit testing, integration testing, and user acceptance testing (UAT), and manage defect resolution. Documentation: Create and maintain detailed system documentation, configuration guides, process flows, and end-user training materials. Support & Training: Provide post-go-live support, troubleshoot system issues, and conduct end-user training to ensure effective system adoption. Continuous Improvement: Proactively identify opportunities for process and system improvements, staying up to date with SAP best practices and new technologies. Requirements : Experience: Proven experience as a SAP Functional Consultant, with a strong focus on SAP Time Management (PT) and at least 5 years of hands-on experience in configuration and implementation. Technical Skills: In-depth knowledge of SAP Time Management processes, including positive and negative time recording, time evaluation, and time data integration. Configuration: Expertise in configuring time schemas and rules, as well as work schedules, public holiday calendars, and different types of attendances and absences. Integration: Solid understanding of the integration points between SAP Time Management and other SAP HCM modules, especially SAP Payroll. Problem-Solving: Excellent analytical and problem-solving skills, with the ability to translate complex business requirements into technical solutions. Communication: Strong interpersonal and communication skills, with the ability to effectively communicate with stakeholders at all levels, from end-users to senior management. Project Lifecycle: Experience working on at least two full-cycle SAP implementation projects. Preferred Qualifications: SAP Time Management Certification Experience with SAP HANA Time Management. Familiarity with xAtlas or other third-party time management systems. Experience in a similar industry. Project management or team leadership experience. If you are interested in applying for this position and you meet the requirements, please apply immediately! Line Up Aviation is a specialist aviation and aerospace recruitment company that has been operating all over the world for more than 30 years. We work with some of the industry's best-known companies and pride ourselves with working to the highest standard of service supported by an ingrained culture of honesty and integrity. " on Twitter for all our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at any time! Thank you for your follow!"
Our client has an opportunity for a Configuration Manager to join them on a contract basis. You will support CM tools user guides production, CM tools improvement and CM tools new releases training. You work closely with project, product and service teams while being part of the CADM team. You are the 1st line of support and training for the Product Lifecycle Management (PLM) tool /Configuration Management Database (CMDB) users. Role : Configuration Manager Location: Portsmouth - minimum 3 days onsite with potential for more, depending on project needs Hours: 35 per week Hourly Rate : 41 per hour via Umbrella, inside Ir35 Clearance : BPSS to start, SC to follow. UKI's due to project What you'll be doing: You are responsible for performing CM activities (identification, control and planning, change, status accounting, audit). You are responsible for recording, controlling, maintaining and distributing the controlled data. You are responsible for providing reports to the CADM Team Lead and/or the project, product or service teams. You work in a shared workload environment, and you specifically support 1 project/product or more as the CADM focal point supported by CADM team members. You are responsible, jointly with the rest of the CADM team to maintain the PLM/CMDB in a fit state. You may be required to manage data in more than 1 environment. Ability to work autonomously, as well as be a team player within the greater functional team, efficiently and methodically with good organisational and interpersonal skills is essential. Good communication/teamwork with all internal stakeholders is essential. You will correspond with your nominated counterparts in the customer and suppliers, recording external documentation into the CMDB and sending internal documentation to external stakeholders. You support all CM activities facing external stakeholder, providing evidence and supporting any related request. You ensure CM compliance by contributing to project level activities with internal and external stakeholders. Requirements: Essential Digitally Literate and proficient with MS Office Tools Previous experience of file/data management tools (MS Office, PDF editor, FTP, Nero, etc.). Full Configuration Management knowledge (Configuration Identification, Configuration Structures (Assembly / Product etc), Baseline Management, Change Management, Status Accounting, Auditing). Previous experience of Product Data Management tools (Windchill, Teamcenter, Aras Minerva, etc.) required Understanding of project, product lifecycle highly desirable. Exposure to APQP, CMII would be an asset Experience setting up the Configuration processes on new project highly desirable. Required qualification level Good standard of education, Degree, HNC, Diploma, NVQ Level 5 or higher. Oral & written English Language essential. The role requires SC and eligibility to handle ITAR. Desirable CM II or equivalent qualification desirable. European languages advantageous. Minimum 5 years Configuration Management experience in a technical or data management environment Experience of working with Customers in a CM Liaison role Experience in a sensitive data environment advantageous If you are interested in applying for this position and you meet the requirements, please apply! Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best known companies who demand the highest standard of applicants. " on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at anytime! Thank you for your follow!"
01/09/2025
Contractor
Our client has an opportunity for a Configuration Manager to join them on a contract basis. You will support CM tools user guides production, CM tools improvement and CM tools new releases training. You work closely with project, product and service teams while being part of the CADM team. You are the 1st line of support and training for the Product Lifecycle Management (PLM) tool /Configuration Management Database (CMDB) users. Role : Configuration Manager Location: Portsmouth - minimum 3 days onsite with potential for more, depending on project needs Hours: 35 per week Hourly Rate : 41 per hour via Umbrella, inside Ir35 Clearance : BPSS to start, SC to follow. UKI's due to project What you'll be doing: You are responsible for performing CM activities (identification, control and planning, change, status accounting, audit). You are responsible for recording, controlling, maintaining and distributing the controlled data. You are responsible for providing reports to the CADM Team Lead and/or the project, product or service teams. You work in a shared workload environment, and you specifically support 1 project/product or more as the CADM focal point supported by CADM team members. You are responsible, jointly with the rest of the CADM team to maintain the PLM/CMDB in a fit state. You may be required to manage data in more than 1 environment. Ability to work autonomously, as well as be a team player within the greater functional team, efficiently and methodically with good organisational and interpersonal skills is essential. Good communication/teamwork with all internal stakeholders is essential. You will correspond with your nominated counterparts in the customer and suppliers, recording external documentation into the CMDB and sending internal documentation to external stakeholders. You support all CM activities facing external stakeholder, providing evidence and supporting any related request. You ensure CM compliance by contributing to project level activities with internal and external stakeholders. Requirements: Essential Digitally Literate and proficient with MS Office Tools Previous experience of file/data management tools (MS Office, PDF editor, FTP, Nero, etc.). Full Configuration Management knowledge (Configuration Identification, Configuration Structures (Assembly / Product etc), Baseline Management, Change Management, Status Accounting, Auditing). Previous experience of Product Data Management tools (Windchill, Teamcenter, Aras Minerva, etc.) required Understanding of project, product lifecycle highly desirable. Exposure to APQP, CMII would be an asset Experience setting up the Configuration processes on new project highly desirable. Required qualification level Good standard of education, Degree, HNC, Diploma, NVQ Level 5 or higher. Oral & written English Language essential. The role requires SC and eligibility to handle ITAR. Desirable CM II or equivalent qualification desirable. European languages advantageous. Minimum 5 years Configuration Management experience in a technical or data management environment Experience of working with Customers in a CM Liaison role Experience in a sensitive data environment advantageous If you are interested in applying for this position and you meet the requirements, please apply! Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best known companies who demand the highest standard of applicants. " on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at anytime! Thank you for your follow!"
Jobs - Frequently Asked Questions
Use the location filter to find IT jobs in cities like London, Manchester, Birmingham, and across the UK.
Entry-level roles include IT support technician, junior developer, QA tester, and helpdesk analyst.
New jobs are posted daily. Set up alerts to be notified as soon as new roles match your preferences.
Key skills include problem-solving, coding, cloud computing, networking, and familiarity with tools like AWS or SQL.
Yes, many employers offer training or junior roles. Focus on building a strong CV with relevant coursework or personal projects.
