Ford Motor Company Limited

Accident Repair Technician (MET) Apprenticeship - Level 3 Employer: FMG Repair (Zig Up) Location: Dumfries FMG Repair (Zig Up) Dumfries are seeking a motivated and enthusiastic individual to join the team as an MET Technician Apprentice. This apprenticeship provides a structured route into the automotive accident repair industry, combining paid employment with a nationally recognised Level 3 qualification. You will develop the knowledge, skills and behaviours required to inspect, remove, repair and refit mechanical, electrical and trim (MET) components on accident damaged vehicles. Working alongside experienced technicians, you will gain practical experience using the latest diagnostic equipment, specialist tools and manufacturer repair methods, providing an excellent foundation for a long term career within the vehicle accident repair industry. Key Responsibilities Assist with the removal, repair and refitting of mechanical, electrical and trim (MET) components on accident damaged vehicles. Learn to inspect vehicles and identify damaged mechanical, electrical and trim components. Support the diagnosis of faults using manufacturer approved diagnostic equipment. Remove and refit vehicle components, including bumpers, lights, doors, glass, interiors, wiring and associated systems. Carry out repairs in accordance with manufacturer methods, industry standards and health and safety requirements. Assist with wheel alignment, suspension checks and the replacement of mechanical and electrical components where required. Complete quality checks to ensure repairs meet manufacturer specifications before vehicles are returned to customers. Maintain a clean, safe and organised working environment. Work closely with Panel Technicians, Paint Technicians and Vehicle Damage Assessors to ensure repairs are completed efficiently. Follow all company policies and procedures, including health and safety and environmental standards. Attend all required apprenticeship training sessions and complete work based assignments. Working Week 40 hours per week, typically Monday to Friday. Normal working hours are usually 8:30am - 5:30pm, although these may vary depending on the employer. Approximately 20% of your working week will be dedicated to Off the Job (OTJ) learning, delivered through online classrooms, face to face sessions and block release training at a training centre in Motherwell. Training & Time Away From Home Apprentices are employed directly by FMG Repair (Zig Up). Training includes week long block release, which requires travel and overnight stays away from home. Supported through: Face to face practical and technical training Virtual classroom sessions and e learning Workplace coaching and mentoring All training is delivered in line with the Level 3 Accident Repair Technician Apprenticeship Standard and ESFA requirements, providing a nationally recognised qualification and the practical skills required to become a qualified MET Technician. Qualification Level 3 Accident Repair Technician (MET) Apprenticeship Duration: 30 months, plus End Point Assessment (EPA). Covers workplace competence, technical knowledge, manufacturer repair methods and Off the Job learning. Successful completion provides a nationally recognised qualification and opportunities to progress into a qualified MET Technician role within the automotive accident repair industry. Salary All apprentices are paid at least the National Minimum Apprenticeship Wage, with opportunities for progression as skills and experience develop. Entry Requirements Aged 16 or over. GCSE (or equivalent) grade 4-9 (A -C) in English and Maths (Predicted grades are accepted, provided the final results meet the required entry requirements.) A genuine interest in vehicle accident repair and automotive technology. Good practical skills and excellent attention to detail. Strong problem solving skills and a willingness to learn. Ability to work independently and as part of a team. Good communication and interpersonal skills. Basic IT skills for completing documentation and communicating effectively. Working towards or holding a full UK driving licence is desirable.

Accident Repair Technician (MET) Apprenticeship - Level 3 Employer: FMG Repair (Zig Up) Location: Dunfermline FMG Repair (Zig Up) Dunfermline are seeking a motivated and enthusiastic individual to join the team as an MET Technician Apprentice. This apprenticeship provides a structured route into the automotive accident repair industry, combining paid employment with a nationally recognised Level 3 qualification. You will develop the knowledge, skills and behaviours required to inspect, remove, repair and refit mechanical, electrical and trim (MET) components on accident damaged vehicles. Working alongside experienced technicians, you will gain practical experience using the latest diagnostic equipment, specialist tools and manufacturer repair methods, providing an excellent foundation for a long term career within the vehicle accident repair industry. Key Responsibilities Assist with the removal, repair and refitting of mechanical, electrical and trim (MET) components on accident damaged vehicles. Learn to inspect vehicles and identify damaged mechanical, electrical and trim components. Support the diagnosis of faults using manufacturer approved diagnostic equipment. Remove and refit vehicle components, including bumpers, lights, doors, glass, interiors, wiring and associated systems. Carry out repairs in accordance with manufacturer methods, industry standards and health and safety requirements. Assist with wheel alignment, suspension checks and the replacement of mechanical and electrical components where required. Complete quality checks to ensure repairs meet manufacturer specifications before vehicles are returned to customers. Maintain a clean, safe and organised working environment. Work closely with Panel Technicians, Paint Technicians and Vehicle Damage Assessors to ensure repairs are completed efficiently. Follow all company policies and procedures, including health and safety and environmental standards. Attend all required apprenticeship training sessions and complete work based assignments. Working Week 40 hours per week, typically Monday to Friday. Normal working hours are usually 8:30am - 5:30pm, although these may vary depending on the employer. Approximately 20% of your working week will be dedicated to Off the Job (OTJ) learning, delivered through online classrooms, face to face sessions and block release training at a training centre in Motherwell. Training & Time Away From Home Apprentices are employed directly by FMG Repair (Zig Up) Training includes week long block release, which requires travel and overnight stays away from home. Supported through: Face to face practical and technical training Virtual classroom sessions and e learning Workplace coaching and mentoring All training is delivered in line with the Level 3 Accident Repair Technician Apprenticeship Standard and ESFA requirements, providing a nationally recognised qualification and the practical skills required to become a qualified MET Technician. Qualification Level 3 Accident Repair Technician (MET) Apprenticeship Duration: 30 months, plus End Point Assessment (EPA). Covers workplace competence, technical knowledge, manufacturer repair methods and Off the Job learning. Successful completion provides a nationally recognised qualification and opportunities to progress into a qualified MET Technician role within the automotive accident repair industry. Salary All apprentices are paid at least the National Minimum Apprenticeship Wage, with opportunities for progression as skills and experience develop. Entry Requirements Aged 16 or over. A GCSE (or equivalent) grade 4-9 (A -C) in English and Maths (Predicted grades are accepted, provided the final results meet the required entry requirements.) A genuine interest in vehicle accident repair and automotive technology. Good practical skills and excellent attention to detail. Strong problem solving skills and a willingness to learn. Ability to work independently and as part of a team. Good communication and interpersonal skills. Basic IT skills for completing documentation and communicating effectively. Working towards or holding a full UK driving licence is desirable. About Calex UK Calex UK is the official apprenticeship recruitment and training partner to Ford in the UK. They deliver high quality, employer led apprenticeship programmes aligned to apprenticeship standards. Barriers to learning can be caused by many different difficulties including learning, physical, social, emotional and mental health, as well as language and communication difficulties. Calex UK is an inclusive and supportive provider, with a dedicated team that will provide advice and guidance to all learners and assess any reasonable adjustments required. Calex UK is committed to actively promoting equality of opportunity to ensure that all learners reach their full learning potential and achieve success during their learning journey. If you require any adjustments to access the application process or would like to discuss this in more detail, please contact us. Recruitment Process Applications are assessed against entry and qualification requirements. Suitable applicants will receive further information by email. If you do not hear back within five working days, please assume your application has been unsuccessful. Applicants will be required to provide evidence of qualifications (GCSEs / Functional Skills). Please note that we are unable to accept any documents other than official certificates. For support, adjustments or application queries, please contact:

FMG Repair (Zig Up) in Cambuslang offers an MET Technician Apprentice level 3 programme that combines paid employment with a nationally recognised qualification. You will gain hands on experience removing, repairing and refitting MET components on accident damaged vehicles, under the guidance of experienced technicians. The role includes learning to inspect, diagnose faults with manufacturer tools, and work with panel, paint staff, ensuring repairs meet manufacturer specifications.

Accident Repair Technician (MET) Apprenticeship - Level 3 Employer: FMG Repair (Zig Up) Location: Falkirk FMG Repair (Zig Up) Falkirk are seeking a motivated and enthusiastic individual to join the team as an MET Technician Apprentice. This apprenticeship provides a structured route into the automotive accident repair industry, combining paid employment with a nationally recognised Level 3 qualification. You will develop the knowledge, skills and behaviours required to inspect, remove, repair and refit mechanical, electrical and trim (MET) components on accident-damaged vehicles. Working alongside experienced technicians, you will gain practical experience using the latest diagnostic equipment, specialist tools and manufacturer repair methods, providing an excellent foundation for a long term career within the vehicle accident repair industry. Key Responsibilities Assist with the removal, repair and refitting of mechanical, electrical and trim (MET) components on accident-damaged vehicles. Learn to inspect vehicles and identify damaged mechanical, electrical and trim components. Support the diagnosis of faults using manufacturer-approved diagnostic equipment. Remove and refit vehicle components, including bumpers, lights, doors, glass, interiors, wiring and associated systems. Carry out repairs in accordance with manufacturer methods, industry standards and health and safety requirements. Assist with wheel alignment, suspension checks and the replacement of mechanical and electrical components where required. Complete quality checks to ensure repairs meet manufacturer specifications before vehicles are returned to customers. Maintain a clean, safe and organised working environment. Work closely with Panel Technicians, Paint Technicians and Vehicle Damage Assessors to ensure repairs are completed efficiently. Follow all company policies and procedures, including health and safety and environmental standards. Attend all required apprenticeship training sessions and complete work-based assignments. Working Week 40 hours per week, typically Monday to Friday. Normal working hours are usually 8:30am - 5:30pm, although these may vary depending on the employer. Approximately 20% of your working week will be dedicated to Off the Job (OTJ) learning, delivered through online classrooms, face to face sessions and block release training at a training centre in Motherwell. Training & Time Away From Home Apprentices are employed directly by FMG Repair (Zig Up). Training includes week-long block release, which requires travel and overnight stays away from home. Supported through: Face to face practical and technical training Virtual classroom sessions and e learning Workplace coaching and mentoring All training is delivered in line with the Level 3 Accident Repair Technician Apprenticeship Standard and ESFA requirements, providing a nationally recognised qualification and the practical skills required to become a qualified MET Technician. Qualification Level 3 Accident Repair Technician (MET) Apprenticeship Duration: 30 months, plus End Point Assessment (EPA). Covers workplace competence, technical knowledge, manufacturer repair methods and Off the Job learning. Successful completion provides a nationally recognised qualification and opportunities to progress into a qualified MET Technician role within the automotive accident repair industry. Salary All apprentices are paid at least the National Minimum Apprenticeship Wage, with opportunities for progression as skills and experience develop. See national minimum apprenticeship wage rates: Entry Requirements Aged 16 or over. GCSE (or equivalent) grade 4-9 (A -C) in English and Maths. Predicted grades are accepted, provided the final results meet the required entry requirements. A genuine interest in vehicle accident repair and automotive technology. Good practical skills and excellent attention to detail. Strong problem solving skills and a willingness to learn. Ability to work independently and as part of a team. Good communication and interpersonal skills. Basic IT skills for completing documentation and communicating effectively. Working towards or holding a full UK driving licence is desirable.

Accident Repair Technician (MET) Apprenticeship - Level 3 Employer: FMG Repair (Zig Up) Location: Cambuslang FMG Repair (Zig Up) Cambuslang are seeking a motivated and enthusiastic individual to join the team as an MET Technician Apprentice. This apprenticeship provides a structured route into the automotive accident repair industry, combining paid employment with a nationally recognised Level 3 qualification. You will develop the knowledge, skills and behaviours required to inspect, remove, repair and refit mechanical, electrical and trim (MET) components on accident damaged vehicles. Working alongside experienced technicians, you will gain practical experience using the latest diagnostic equipment, specialist tools and manufacturer repair methods, providing an excellent foundation for a long term career within the vehicle accident repair industry. Key Responsibilities Assist with the removal, repair and refitting of mechanical, electrical and trim (MET) components on accident damaged vehicles. Learn to inspect vehicles and identify damaged mechanical, electrical and trim components. Support the diagnosis of faults using manufacturer approved diagnostic equipment. Remove and refit vehicle components, including bumpers, lights, doors, glass, interiors, wiring and associated systems. Carry out repairs in accordance with manufacturer methods, industry standards and health and safety requirements. Assist with wheel alignment, suspension checks and the replacement of mechanical and electrical components where required. Complete quality checks to ensure repairs meet manufacturer specifications before vehicles are returned to customers. Maintain a clean, safe and organised working environment. Work closely with Panel Technicians, Paint Technicians and Vehicle Damage Assessors to ensure repairs are completed efficiently. Follow all company policies and procedures, including health and safety and environmental standards. Attend all required apprenticeship training sessions and complete work based assignments. Working Week 40 hours per week, typically Monday to Friday. Normal working hours are usually 8:30 am - 5:30 pm, although these may vary depending on the employer. Approximately 20% of your working week will be dedicated to Off the Job (OTJ) learning, delivered through online classrooms, face to face sessions and block release training at a training centre in Motherwell. Training & Time Away From Home Apprentices are employed directly by FMG Repair (Zig Up) Training includes week long block release, which requires travel and overnight stays away from home. Supported through: Face to face practical and technical training Virtual classroom sessions and e learning Workplace coaching and mentoring All training is delivered in line with the Level 3 Accident Repair Technician Apprenticeship Standard and ESFA requirements, providing a nationally recognised qualification and the practical skills required to become a qualified MET Technician. Qualification Level 3 Accident Repair Technician (MET) Apprenticeship Duration: 30 months, plus End Point Assessment (EPA). Covers workplace competence, technical knowledge, manufacturer repair methods and Off the Job learning. Successful completion provides a nationally recognised qualification and opportunities to progress into a qualified MET Technician role within the automotive accident repair industry. Salary All apprentices are paid at least the National Minimum Apprenticeship Wage, with opportunities for progression as skills and experience develop. Entry Requirements Aged 16 or over. GCSE (or equivalent) grade 4-9 (A -C) in English and Maths (Predicted grades are accepted, provided the final results meet the required entry requirements.) A genuine interest in vehicle accident repair and automotive technology. Good practical skills and excellent attention to detail. Strong problem solving skills and a willingness to learn. Ability to work independently and as part of a team. Good communication and interpersonal skills. Basic IT skills for completing documentation and communicating effectively. Working towards or holding a full UK driving licence is desirable. About Calex UK Calex UK is the official apprenticeship recruitment and training partner to Ford in the UK. They deliver high quality, employer led apprenticeship programmes aligned to apprenticeship standards. Barriers to learning can be caused by many different difficulties including learning, physical, social, emotional and mental health, as well as language and communication difficulties. Calex UK is an inclusive and supportive provider, with a dedicated team that will provide advice and guidance to all learners and assess any reasonable adjustments required. Calex UK is committed to actively promoting equality of opportunity to ensure that all learners reach their full learning potential and achieve success during their learning journey. If you require any adjustments to access the application process or would like to discuss this in more detail, please contact us. Recruitment Process Applications are assessed against entry and qualification requirements. Suitable applicants will receive further information by email. If you do not hear back within five working days, please assume your application has been unsuccessful. Applicants will be required to provide evidence of qualifications (GCSEs / Functional Skills). Please note that we are unable to accept any documents other than official certificates. For support, adjustments or application queries, please contact:

FMG Repair (Zig Up) in Dunfermline is offering a Level 3 Accident Repair Technician Apprenticeship (MET). You will train while employed, gaining hands-on MET skills and a nationally recognised qualification. Training includes week long block release, travel to Motherwell for OTJ classes, and end point assessment after 30 months. Entry requires GCSE English and Maths, interest in automotive tech, and a full UK driving licence is desirable.

FMG Repair (Zig Up) Glasgow are offering an MET Technician Apprenticeship - Level 3, combining paid work with a Level 3 qualification. You will develop the knowledge and skills to inspect, remove, repair and refit MET components on accident damaged vehicles. Working alongside experienced technicians using the latest diagnostic equipment and manufacturer repair methods, you will gain practical, on the job experience. Week long block releases will occur away from home as part of the training.

FMG Repair (Zig Up) in Dumfries offers an MET Technician Apprentice Level 3. This paid apprenticeship combines on the job training with a nationally recognised Level 3 qualification. You will develop the knowledge, skills and behaviours to inspect, remove, repair and refit MET components on accident damaged vehicles. Working with experienced technicians, you will gain hands on experience with diagnostic equipment and manufacturer repair methods, creating a strong foundation for a long term

Accident Repair Technician (MET) Apprenticeship - Level 3 Employer: FMG Repair (Zig Up) Location: Glasgow FMG Repair (Zig Up) Glasgow are seeking a motivated and enthusiastic individual to join the team as an MET Technician Apprentice. This apprenticeship provides a structured route into the automotive accident repair industry, combining paid employment with a nationally recognised Level 3 qualification. You will develop the knowledge, skills and behaviours required to inspect, remove, repair and refit mechanical, electrical and trim (MET) components on accident damaged vehicles. Working alongside experienced technicians, you will gain practical experience using the latest diagnostic equipment, specialist tools and manufacturer repair methods, providing an excellent foundation for a long term career within the vehicle accident repair industry. Key Responsibilities Assist with the removal, repair and refitting of mechanical, electrical and trim (MET) components on accident damaged vehicles. Learn to inspect vehicles and identify damaged mechanical, electrical and trim components. Support the diagnosis of faults using manufacturer approved diagnostic equipment. Remove and refit vehicle components, including bumpers, lights, doors, glass, interiors, wiring and associated systems. Carry out repairs in accordance with manufacturer methods, industry standards and health and safety requirements. Assist with wheel alignment, suspension checks and the replacement of mechanical and electrical components where required. Complete quality checks to ensure repairs meet manufacturer specifications before vehicles are returned to customers. Maintain a clean, safe and organised working environment. Work closely with Panel Technicians, Paint Technicians and Vehicle Damage Assessors to ensure repairs are completed efficiently. Follow all company policies and procedures, including health and safety and environmental standards. Attend all required apprenticeship training sessions and complete work based assignments. Working Week 40 hours per week, typically Monday to Friday. Normal working hours are usually 8:30am - 5:30pm, although these may vary depending on the employer. Approximately 20% of your working week will be dedicated to Off the Job (OTJ) learning, delivered through online classrooms, face to face sessions and block release training at a training centre in Motherwell. Training & Time Away From Home Apprentices are employed directly by FMG Repair (Zig Up) Training includes week long block release, which requires travel and overnight stays away from home. Supported through: Face to face practical and technical training Virtual classroom sessions and e learning Workplace coaching and mentoring All training is delivered in line with the Level 3 Accident Repair Technician Apprenticeship Standard and ESFA requirements, providing a nationally recognised qualification and the practical skills required to become a qualified MET Technician. Qualification Level 3 Accident Repair Technician (MET) Apprenticeship Duration: 30 months, plus End Point Assessment (EPA). Covers workplace competence, technical knowledge, manufacturer repair methods and Off the Job learning. Successful completion provides a nationally recognised qualification and opportunities to progress into a qualified MET Technician role within the automotive accident repair industry. Salary All apprentices are paid at least the National Minimum Apprenticeship Wage, with opportunities for progression as skills and experience develop. Entry Requirements Aged 16 or over. GCSE (or equivalent) grade 4-9 (A -C) in English and Maths (Predicted grades are accepted, provided the final results meet the required entry requirements.) A genuine interest in vehicle accident repair and automotive technology. Good practical skills and excellent attention to detail. Strong problem solving skills and a willingness to learn. Ability to work independently and as part of a team. Good communication and interpersonal skills. Basic IT skills for completing documentation and communicating effectively. Working towards or holding a full UK driving licence is desirable.