Gulfstream Aerospace Corporation

RS Wheel and Brake Tech 1 (FAR) in GAC Farnborough Company: Gulfstream Aerospace Corporation Shift: M-TH 7:00-15:15 and Friday 7:00-15:00. Employment Type: Full-time The position will be a part of our Materials Repair and Overhaul group. It is an exciting time to be a part of the group as we are growing. Person selected for this role will be very hands on. Wheel and/or brake experience preferred. Education and Experience Requirements Other GCSE required. Must possess basic mechanical skills, including the use of hand tools. Proficient operation of all tools/equipment in the dept incl glass bead and carboblast machines. Must possess basic understanding of shop math. Experience in one of the following or other related experience: Sheetmetal, hydraulic, Wheel, Brake overhaul. Position Purpose: Under moderate supervision, repair and certify aircraft wheel and brake assemblies, subassemblies and components in accordance with Gulfstream Repair Station requirements. Job Description Responsible for complying with all corporate or local company procedures. Highlight to the supervisor any procedures that require amending. Setting up operating and cleaning all the necessary wheel & brake bay equipment and tooling. Maintaining all components or parts using the required CMMs. Maintain and utilise all required paperwork in accordance with UK CAA requirements. Develop and apply basic skills in procedures, techniques, tools, materials and/or equipment, as appropriate to area of specialization. Perform repairs of mechanical and subassemblies through removals, repair or replacement of defective parts and/or fabrication of replacement parts, and installations in accordance with blueprints, component maintenance manuals, vendor documents, verbal instructions, engineering dispositions and other authorized maintenance data to include On The Job Training (OJT); all activities to be in accordance with Repair Station requirements ensuring all parts and assemblies meet conformance. Set up and operate necessary test equipment in accordance with required documentation to perform functional and operational tests of mechanical and electrical aircraft components for return to service. Demonstrate effective repair techniques using acceptable practices including troubleshooting. Issue an authorized release certificate for components worked under the company component capability listing. Must have demonstrated, proven experience to be selected and approved, attend training, pass appropriate exams and through approval by QC department. Maintain and utilize all required paperwork in accordance with CAA/FAA/EASA RS requirements. Maintain a clean and orderly work area including test equipment and peripherals. Comply with all company and legislative environmental health and safety regulations. Demonstrate effective repair techniques using acceptable practices including troubleshooting, soldering and application of protective coatings. Utilize training and tools to effectively troubleshoot complex electrical circuits and/or systems during component repair process. Where competent (experience based) assist with training onboarding Acft Component Repair I Techs, must attend train the trainer course. Resolves routine questions and problems, referring the more complex issues to higher levels. Perform other duties as assigned. Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

Gulfstream Aerospace Corporation in Farnborough, UK, is seeking a hands-on RS Wheel and Brake Tech 1 to repair and certify aircraft wheel and brake assemblies and subassemblies. The role requires basic mechanical skills and hand-tool proficiency, with wheel/brake overhaul experience preferred. Under supervision, you will set up equipment, perform repairs, and ensure conformance to Repair Station and UK CAA/FAA requirements.

Gulfstream Aerospace Corporation in Farnborough seeks an experienced engineer to oversee full projects from design to certification, ensuring compliance with DOH, CA A Part 21J and related standards. The role requires aviation experience and ability to mentor on design methods and regulatory processes. The candidate will lead technical decisions, develop new design standards, and support cross-functional teams to meet cost and schedule targets while maintaining high-quality certification

Company: Gulfstream Aerospace Corporation FAST Tech Sr (FAR) Location: Within one hour of Luton Airport. Education and Experience Requirements Successfully completed an aviation sector apprenticeship or equivalent. Extensive combined experience in inspection, maintenance or servicing of large/mid size aircraft (CAT 1). CAA B1 or B1/B2 Engineers License with a minimum of 3 Gulfstream Aircraft Type ratings. Other EASA Part 66 full B1, B2 or B1/2 License required. Valid Driver's License required. Valid Passport required. Position Purpose Independently performs a variety of aircraft modifications and maintenance functions on AOG aircraft on road trips and in the Product Support organisation. Essential Functions Must be available on an on call basis, with the ability to be on site or dispatched on the FAST aircraft within two hours of the initial contact from Gulfstream. Acts as the single point of contact between Gulfstream and the customer to correctly relay the aircraft schedule and return to service expectations. Performs required AOG maintenance and necessary servicing of all aircraft mechanical and avionics systems. Demonstrates ability to work independently and consistently to perform assigned maintenance and avionics. Compliance with internal and EASA inspection and documentation requirements; acts as an inspector in support of a specific aircraft, line or base maintenance in accordance with MOE Part 1.4.6, as revised; completes work order sign offs, logbook entries, shift turnovers, expense reports and all other paperwork in a timely manner. Certifies tasks they have been trained on and authorised to perform; inspects and certifies at both Luton main base and other locations worldwide; may carry out other maintenance tasks requested by the Maintenance Team Leader; may include Category 'C' Certification for those qualified in accordance with MOE Part 3.4, as revised. Establishes and maintains professional working relationship with the customer and provides one on one direct familiarisation briefings during the road trip. Promotes and ensures that the quality of workmanship in the final product meets a standard acceptable to the EASA and the UK CAA; complies with statutory and company standards for all maintenance and design change work and ensures appropriate cleanliness and tidiness. Coordinates with Line Service and FBO operations to schedule and assist with movement of aircraft; arranges, as needed, overhaul or repair of customer property and inspects/operates all interior installations and records discrepancies. Provides regular updates on aircraft status and customer support activity to Field Service Representative and management. Complies with the company's 'Maintenance Organisation Expedition, 'Safety Management System' requirements, including all health and safety requirements. Understands and participates in assigned personal Employee Performance Review (EPR) goals. Ensures completion of and attendance to all mandatory/identified training courses & CBTs. Additional Functions Ensures all relevant corporate policies are understood and complied with. Attends, when assigned, any required meetings with internal and external customers. Stands in as Technician Sr as requested. Performs other duties as assigned. Other Requirements Formal training in Gulfstream product line maintenance procedures and practices preferred; includes Flight Safety Maintenance initial training for specific models. Must possess a working knowledge of the company policies and procedures, Repair Station and Quality Control Manual, pertinent process specifications, and technical reference materials. Ability to travel extensively (with short notice) both domestically and internationally. Additional Information Requisition Number: 234551 Category: Service Center Percentage of Travel: Up to 25% Shift: FAST 9x9 5 Days Off Employment Type: Full-time Posting End Date: 07/30/2026 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Gulfstream Aerospace Corporation, a wholly owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, supports the world's most technologically advanced business jet aircraft.

Education and Experience Requirements Bachelor's Degree in relevant field required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Aviation experience required. Position Purpose: Oversight and coordination on all engineering projects within the DOA containing compliance demonstration, CAA and/or EASA mandates, critical design problems, which requires extensive knowledge on development of design to certification compliance requirements. Job Description Principle Duties and Responsibilities: Essential Functions: Responsible for an entire engineering project from an engineering design perspective within established scope per Design Organization Handbook (DOH). To be nominated as a CVE in at least one discipline area. To support HDO and/or HoA, and deputise when required. Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities, whilst supporting compliance verification with the applicable regulations. Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge. Leads the development of innovative principles and ideas. Acts independently to determine improved methods and/or procedures to optimize efficiency, cost and schedule requirements. Works under consultative direction; uses independent judgment to accomplish objectives. Develops standards and guides for diverse engineering activities. Additional Functions: When required, assumes delegation of departmental/managerial tasks. Mentoring and/or training on design applications and methodologies. Perform other duties as assigned. Other Requirements Previous CVE experience or equivalent. Previous Form 4 holder desirable. Must have detailed knowledge of CAA Part 21J Regulations and Certification Specifications (CS/JAR 25, 26 EU-OPS, Part-CAT). Working experiences of other regulatory requirements, in conjunction with understanding of bilateral agreements beneficial. Fully conversant with design applications (CATIA, AutoCad) and certification / compliance processes. Exhibits leadership qualities. Excellent inter personal and team management skills. Ability to communicate complex technical issues. Highly motivated with desires to succeed. Confident and competent, with attention to details. Ability to adapt and learn effectively and efficiently. Additional Information Requisition Number: 234271 Percentage of Travel: Up to 25% Shift: First Employment Type: Full-time Posting End Date: 07/31/2026 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Job Segment: Compliance, Drafting, AutoCAD, CAD, Aerospace Engineering, Legal, Engineering

Gulfstream Aerospace Corporation in Farnborough is seeking a RS Sheetmetal Tech II to safely layout, fabricate and install aircraft sheet metal parts under supervision. The role requires attention to detail, adherence to specifications and compliance with FAA processes. You will use blueprints, operate brakes, presses and riveters, and work within a UK shift pattern. A high school diploma and experience in sheet metal are essential, with a valid driver's license and a commitment to safety.

RS Sheetmetal Tech II (FAR) £5000 Sign On Bonus Company: Gulfstream Aerospace Corporation At Gulfstream, our people are at the heart of everything we do. We believe in inspiring and empowering every individual to reach their fullest potential. From workforce development and meaningful connections to a culture of trust, respect, and integrity, we invest in our employees so they can do their best work and achieve success together. Creating and delivering the world's finest aviation experience starts with our people and when our people thrive, so does our mission. Education and Experience Requirements High School Diploma or GED required. Experience in sheet metal and/or fabrication. Valid Driver's License required. Position Purpose: The Sheetmetal Technician II works under general supervision to safely layout, fabricate and install parts, equipment and fabricated items on aircraft following established operating procedures. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. Job Description Essential Functions Safely perform sheet-metal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft under general supervision. Coordinate with supervision and inspection to ensure compliance with internal and FAA paperwork, sign offs and quality specifications. Use blueprints to cut and form plastics and follow standard operating procedures when using adhesives, sealants and solvents. Utilize proper tooling, shape and form complex angles and configurations according to blueprint specifications or written/verbal information. Safely operate shop equipment such as brakes, presses, riveting equipment, shears, and hand tools associated with sheet metal functions. Use the proper hardware for various sheet metal applications. Comply with all safety, 5S, and housekeeping policies. Use personal protective equipment as required. Ensure aircraft interior is protected (PTP). Assist in monthly 5S audits. Use the material tracking system to create parts demand, track squawks and to sign off work. Assist in developing initiatives to meet individual OGSM requirements, as required. Additional Functions Participate in continuous improvement activities (e.g., YIAW, Kaizen events). Properly use and maintain company provided tools and equipment and return items to tool room after use. Ensure standard operating procedures are followed when operating ground support equipment. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de icing fluids, and solvent rags. Ensure accurate daily job charging to the aircraft. Exchange job related information and coordinate work activities between shifts through turnover report meetings and direct contact with leadership. Assist in maintaining shop equipment and associated JSAs. Perform other duties as assigned. Other Requirements Working knowledge of sheet metal installation and fabrication processes (measuring, cutting, bending, forming, and drilling of aluminum sheet stock, angle and honeycomb). Ability to read and interpret blueprints and engineering documentation. Valid driver's license required to operate towing and other Gulfstream transportation equipment. Ability to read, write, speak, and understand English. Ability to use tools and equipment associated with sheet metal installation and fabrication work. Ability to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Good working knowledge of computers and experience with Microsoft Office suite. Additional Information Requisition Number: 232600 Category: Maintenance Percentage of Travel: None Shift: UK Shift Pattern 4x4 Employment Type: Full time Posting End Date: 07/23/2026 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Gulfstream Aerospace Corporation, a wholly owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically advanced business jet aircraft.