Metering Engineer Clearance required: BPSS Interview process: Tech IV Location: Remote with travel at set milestones. Leads site-level technical coordination for metering deployments Participates to site surveys (so will travel a lot at the beginning) and assessments as OT technical expert (instrumentation + IT/OT integration) Strong specialist in metering technologies, instrumentation, and automation Designs and validates connectivity architecture (PLCs, SCADA, gateways, PME) Oversees configuration, commissioning, and interface validation Ensures cybersecurity compliance with the support of the Cyber SME in the central team Drives robust coms integration Manages site-level documentation, change control, and testing Provides support to xxxx local teams Experience in L&S, sustainability solutions and especially Schneider PME & RA is a plus English speaker Reports to Project managers in each Cluster (by Geo) and the lead architect in the central technical team Detailed job description from the client We are seeking a highly skilled and motivated Technical Engineer to lead the design and deployment of industrial utilities metering solutions across xxxx sites. In this pivotal role, you will be responsible for conducting site assessments, selecting appropriate meters, designing installation plans, and integrating metering systems with OT/IT infrastructure. You will also ensure all solutions comply with international standards. By enabling precise monitoring of energy and resources, you will directly contribute to THE CLIENT's sustainability objectives and drive operational excellence. Key Responsibilities Perform on-site assessments to evaluate infrastructure and feasibility for installing electricity, gas, diesel, water, and wastewater meters, addressing mechanical, electrical, civil considerations, and challenges like complex or limited pipe runs and retrofits. Analyze engineering documentation including process flow diagrams, P&IDs, and electrical single-line diagrams to identify optimal meter technologies, sizes, and installation points. Provide recommendations for metering solutions that adhere to xxxx's standards, including the appropriate selection of meter type, accuracy class, and communication protocols, based on a thorough assessment and consideration of installation complexities, hazardous areas, fluid characteristics, and physical parameters. Design and implement meter connectivity architecture by integrating with PLCs, gateways, SCADA systems, and Schneider PME platforms. Collaborate with site engineering and OT/IT teams to define network requirements and ensure compliance with cybersecurity and OT boundary controls. Provide technical input to OEMs and installation contractors, supporting procurement and commissioning activities. Document 'as-is' and 'to-be' metering configurations, maintaining traceable records of design decisions and lessons learned. Skills and Experience Degree or equivalent in Electrical, Instrumentation, Automation or Control Engineering. Proven experience in industrial utilities metering (electricity, gas, steam, water, wastewater), ideally within pharmaceutical or process manufacturing environments. Strong understanding of flow measurement principles and metering technologies. Deep knowledge of communication protocols including Modbus TCP/RTU, Ethernet/IP, RS-485, and pulse/analog signals. Familiarity with PLCs, gateways, SCADA systems, and PME integration. Ability to interpret technical drawings and produce structured documentation. Excellent communication and stakeholder engagement skills. Training in Hazardous Area Equipment selection and installation fundamentals. Experience with global projects and working knowledge of both local and international standards (e.g. ATEX, CSA). Skilled in handling large datasets, particularly for energy data verification Expected Deliverables Site Assessment Reports with metering gap analysis. Recommended Meter Specifications and Connectivity Designs. Meter Layout Drawings, Maintenance and Calibration guide. Bill of Materials (BoM) for procurement with clear outline of scopes. Technical validation input for cost estimation and vendor quotations. JBRP1_UKTJ
06/12/2025
Full time
Metering Engineer Clearance required: BPSS Interview process: Tech IV Location: Remote with travel at set milestones. Leads site-level technical coordination for metering deployments Participates to site surveys (so will travel a lot at the beginning) and assessments as OT technical expert (instrumentation + IT/OT integration) Strong specialist in metering technologies, instrumentation, and automation Designs and validates connectivity architecture (PLCs, SCADA, gateways, PME) Oversees configuration, commissioning, and interface validation Ensures cybersecurity compliance with the support of the Cyber SME in the central team Drives robust coms integration Manages site-level documentation, change control, and testing Provides support to xxxx local teams Experience in L&S, sustainability solutions and especially Schneider PME & RA is a plus English speaker Reports to Project managers in each Cluster (by Geo) and the lead architect in the central technical team Detailed job description from the client We are seeking a highly skilled and motivated Technical Engineer to lead the design and deployment of industrial utilities metering solutions across xxxx sites. In this pivotal role, you will be responsible for conducting site assessments, selecting appropriate meters, designing installation plans, and integrating metering systems with OT/IT infrastructure. You will also ensure all solutions comply with international standards. By enabling precise monitoring of energy and resources, you will directly contribute to THE CLIENT's sustainability objectives and drive operational excellence. Key Responsibilities Perform on-site assessments to evaluate infrastructure and feasibility for installing electricity, gas, diesel, water, and wastewater meters, addressing mechanical, electrical, civil considerations, and challenges like complex or limited pipe runs and retrofits. Analyze engineering documentation including process flow diagrams, P&IDs, and electrical single-line diagrams to identify optimal meter technologies, sizes, and installation points. Provide recommendations for metering solutions that adhere to xxxx's standards, including the appropriate selection of meter type, accuracy class, and communication protocols, based on a thorough assessment and consideration of installation complexities, hazardous areas, fluid characteristics, and physical parameters. Design and implement meter connectivity architecture by integrating with PLCs, gateways, SCADA systems, and Schneider PME platforms. Collaborate with site engineering and OT/IT teams to define network requirements and ensure compliance with cybersecurity and OT boundary controls. Provide technical input to OEMs and installation contractors, supporting procurement and commissioning activities. Document 'as-is' and 'to-be' metering configurations, maintaining traceable records of design decisions and lessons learned. Skills and Experience Degree or equivalent in Electrical, Instrumentation, Automation or Control Engineering. Proven experience in industrial utilities metering (electricity, gas, steam, water, wastewater), ideally within pharmaceutical or process manufacturing environments. Strong understanding of flow measurement principles and metering technologies. Deep knowledge of communication protocols including Modbus TCP/RTU, Ethernet/IP, RS-485, and pulse/analog signals. Familiarity with PLCs, gateways, SCADA systems, and PME integration. Ability to interpret technical drawings and produce structured documentation. Excellent communication and stakeholder engagement skills. Training in Hazardous Area Equipment selection and installation fundamentals. Experience with global projects and working knowledge of both local and international standards (e.g. ATEX, CSA). Skilled in handling large datasets, particularly for energy data verification Expected Deliverables Site Assessment Reports with metering gap analysis. Recommended Meter Specifications and Connectivity Designs. Meter Layout Drawings, Maintenance and Calibration guide. Bill of Materials (BoM) for procurement with clear outline of scopes. Technical validation input for cost estimation and vendor quotations. JBRP1_UKTJ
As the software/PLC Programmer you will be responsible for developing and maintaining high-quality PLC-based control and monitoring software to support industrial and energy systems. The role ensures programmed solutions are reliable, safe and delivered inline with technical specifications, engineering standards, and customer requirements. Working closely with the engineering and control team, you will support the full life cycle of control systems, including design, testing, commissioning and operational troubleshooting whilst maintaining robust documentation and configuration control. Responsibilities: Design, develop, enhance, and test PLC-based control applications using CODESYS (IEC 61131-3 languages: ST, FBD, SFC, LD). Implement and debug logic for real-time systems, control panels, and industrial automation networks. Translate functional specifications into detailed, maintainable, and scalable program logic with an emphasis on safety. Integrate third-party hardware and protocols (e.g., Modbus TCP/RTU, CANopen, OPC UA, Ethernet/IP). Support Factory Acceptance Testing (FAT), Sit Acceptance Testing (SAT), and commissioning activities as required, Maintain accurate technical documentation, version control, and configuration backups in accordance with internal quality processes. Diagnose and resolve issues in live environments, supporting both local and remote troubleshooting. Collaborate with the wider team to deliver best-in-class monitoring solutions. You: Qualifications Appropriate Engineering qualification Experience Essential: 2+ years' experience with CODESYS or similar platforms (e.g., Siemens TIA Portal, Beckhoff TwinCAT, WAGO e!COCKPIT). Strong knowledge of IEC 61131-3 programming languages, especially Structured Text (ST). Proven experience developing logic for industrial automation or energy control systems. Familiarity with control system design principles (signal conditioning, interlocks, safety systems). Ability to read and interpret electrical schematics and P&IDs. Skilled in testing and debugging both simulated and live systems. Desirable: Experience with BESS, HVAC controls, or renewable energy systems. Knowledge of networking, routers, firewalls, and industrial communication protocols. Exposure to visualization/HMI platforms (e.g., CODESYS Visualization, Ignition, Wonderware). Experience with Linux-based embedded systems or RTOS. Hands-on experience with WAGO PLCs and edge computers. Knowledge of cloud computing and visualisation tools (e.g., Grafana) Please apply for immedite consideration At Adept Resourcing - Commercial & Engineering, we specialise in connecting companies with top talent that drives innovation, growth and success. With our industry expertise, extensive network and personalised approach, we're here to help you. JBRP1_UKTJ
06/12/2025
Full time
As the software/PLC Programmer you will be responsible for developing and maintaining high-quality PLC-based control and monitoring software to support industrial and energy systems. The role ensures programmed solutions are reliable, safe and delivered inline with technical specifications, engineering standards, and customer requirements. Working closely with the engineering and control team, you will support the full life cycle of control systems, including design, testing, commissioning and operational troubleshooting whilst maintaining robust documentation and configuration control. Responsibilities: Design, develop, enhance, and test PLC-based control applications using CODESYS (IEC 61131-3 languages: ST, FBD, SFC, LD). Implement and debug logic for real-time systems, control panels, and industrial automation networks. Translate functional specifications into detailed, maintainable, and scalable program logic with an emphasis on safety. Integrate third-party hardware and protocols (e.g., Modbus TCP/RTU, CANopen, OPC UA, Ethernet/IP). Support Factory Acceptance Testing (FAT), Sit Acceptance Testing (SAT), and commissioning activities as required, Maintain accurate technical documentation, version control, and configuration backups in accordance with internal quality processes. Diagnose and resolve issues in live environments, supporting both local and remote troubleshooting. Collaborate with the wider team to deliver best-in-class monitoring solutions. You: Qualifications Appropriate Engineering qualification Experience Essential: 2+ years' experience with CODESYS or similar platforms (e.g., Siemens TIA Portal, Beckhoff TwinCAT, WAGO e!COCKPIT). Strong knowledge of IEC 61131-3 programming languages, especially Structured Text (ST). Proven experience developing logic for industrial automation or energy control systems. Familiarity with control system design principles (signal conditioning, interlocks, safety systems). Ability to read and interpret electrical schematics and P&IDs. Skilled in testing and debugging both simulated and live systems. Desirable: Experience with BESS, HVAC controls, or renewable energy systems. Knowledge of networking, routers, firewalls, and industrial communication protocols. Exposure to visualization/HMI platforms (e.g., CODESYS Visualization, Ignition, Wonderware). Experience with Linux-based embedded systems or RTOS. Hands-on experience with WAGO PLCs and edge computers. Knowledge of cloud computing and visualisation tools (e.g., Grafana) Please apply for immedite consideration At Adept Resourcing - Commercial & Engineering, we specialise in connecting companies with top talent that drives innovation, growth and success. With our industry expertise, extensive network and personalised approach, we're here to help you. JBRP1_UKTJ
This Controls Automation Engineer position is days-based Monday-Friday, company car, 55,000 plus 18% bonus, and offers training and career development with an international market leader in their field. Within the position you will be provided with the opportunity to utilise your engineering experience and knowledge to identify and improve machinery, equipment and manufacturing lines. What's in it for you as Controls Automation Engineer 55,000 basic salary plus 18% Bonus Pension match up to 10% Company Car with fuel card Days based position Monday to Friday, that may require up to 2 nights per week (fully expensed) away from home visiting a particular site Extensive training and career development programmes The opportunity to work with a team of highly skilled technicians across maintenance and project engineering activities Key Responsibilities of Controls Automation Engineer Travel across the region to provide support to each of the group's manufacturing sites. Provide 'hands-on' technical support and expertise and drive Plant Operational Improvement as part of the Group Engineering function. Support the development of the Reliability Centred Maintenance Strategy by supporting criticality assessments and drive towards condition-based monitoring Enhance plant reliability by applying modern maintenance strategies and continuous improvement techniques. Support new and innovative process automation initiatives. I would love to speak to anyone who has any of the following: Previous experience as Maintenance Engineer from either an electrical background An Electrical Apprenticeship, NVQ Level 3 Engineering or City & Guilds Level 3, BTEC Level 3 in Engineering or equivalent Naric / Enic Conversion Experience in Process Automation Controls systems, Siemens TIA, SCADA, HMIs and associated networking technology Ability to trouble shoot & repair manufacturing plant equipment & machinery Previous experience with Electrical Maintenance within industrial manufacturing plant environments Interested? We'd be delighted to chat with you. Apply today and take the next step toward a role that fits your life and career development.
06/12/2025
Full time
This Controls Automation Engineer position is days-based Monday-Friday, company car, 55,000 plus 18% bonus, and offers training and career development with an international market leader in their field. Within the position you will be provided with the opportunity to utilise your engineering experience and knowledge to identify and improve machinery, equipment and manufacturing lines. What's in it for you as Controls Automation Engineer 55,000 basic salary plus 18% Bonus Pension match up to 10% Company Car with fuel card Days based position Monday to Friday, that may require up to 2 nights per week (fully expensed) away from home visiting a particular site Extensive training and career development programmes The opportunity to work with a team of highly skilled technicians across maintenance and project engineering activities Key Responsibilities of Controls Automation Engineer Travel across the region to provide support to each of the group's manufacturing sites. Provide 'hands-on' technical support and expertise and drive Plant Operational Improvement as part of the Group Engineering function. Support the development of the Reliability Centred Maintenance Strategy by supporting criticality assessments and drive towards condition-based monitoring Enhance plant reliability by applying modern maintenance strategies and continuous improvement techniques. Support new and innovative process automation initiatives. I would love to speak to anyone who has any of the following: Previous experience as Maintenance Engineer from either an electrical background An Electrical Apprenticeship, NVQ Level 3 Engineering or City & Guilds Level 3, BTEC Level 3 in Engineering or equivalent Naric / Enic Conversion Experience in Process Automation Controls systems, Siemens TIA, SCADA, HMIs and associated networking technology Ability to trouble shoot & repair manufacturing plant equipment & machinery Previous experience with Electrical Maintenance within industrial manufacturing plant environments Interested? We'd be delighted to chat with you. Apply today and take the next step toward a role that fits your life and career development.
CEF - City Electrical Factors - IT
Durham, County Durham
Join one of the UK's largest electrical wholesalers as we reimagine our technology for the digital age. We're modernising our legacy systems and building new platforms powered by AWS and AI - and we need creative minds to help us shape the future! What You'll Do: We have a fantastic opportunity for a forward thinking, customer focused, technically minded IT Service Desk Team Lead to join our Service Operation team based in Durham. You'd be joining us at an exciting time where we are actively maturing our processes, introducing new technology and adopting a much more end user focused experience. The IT Service Desk are the face of IT with responsibility for raising, triaging and managing Incident, Service Request and Procurement tickets, as well as providing 1st Line support on a wide range of systems, applications and devices across UK, Ireland, Spain and Netherlands. As an IT Service Desk Team Lead, you will manage a team of Service Desk analysts, oversee daily operations, and ensure customer satisfaction meets the standards required. This role involves handling escalations, providing technical guidance, and improving processes through data analysis and training. The ideal candidate will have a keen eye for identifying areas for automation and use of AI to reduce burden on Service Desk, whilst delivering value back to the end-user community. What You'll Bring: Excellent Team Management and Leadership Qualities with experience managing, coaching and supporting IT service desk staff Oversee daily Service Desk performance, ensuring timely resolution of incidents, balanced workloads, and adherence to technical and quality standards. Oversee daily Service Desk performance, ensuring timely resolution of incidents, balanced workloads, and adherence to technical and quality standards. Develop team skills and implement targeted training to strengthen technical expertise and cross-team collaboration. Uphold policy and security compliance, act as technical escalation point, and collaborate with the Incident Manager during major incidents and CAB activities. Our Hiring Process: Intro call with our Talent Team - 30 mins 1st stage interview with Hiring Managers (Microsoft Teams) - 60 mins 2nd stage interview with Senior Leadership & Hiring Managers (Onsite - Durham) - 60 mins The role will be based in our award-winning IT and Marketing office, based on the outskirts of Durham found here. Hybrid working patterns are in place, with the nature of the role there will be an expectation of being in the office 3 days per week . Business travel may be required from time to time as part of this role. About Us: Founded in 1951 in Kenilworth, UK, City Electrical Factors (CEF) has grown into a world-leading electrical wholesale and manufacturing business with over 400 branches across the UK and a strong presence in the USA, Canada, Spain and Australia. Our IT and digital teams are driving the next chapter of our journey Re-engineering legacy systems, adopting modern cloud technologies and exploring AI to deliver faster, smarter and more connected customer experiences. Our teams are distributed across the UK, USA, Canada, Spain and Australia. Our culture is collaborative, forward-thinking and people-focused - where your ideas and contributions genuinely matter. Our Mission: City is a world leading electrical wholesale and manufacturing business providing electrical products to the industry. We in IT are delivering value to our business and our customers with the implementation of packaged software and bespoke engineering for the digital age using AWS serverless technology. We need talented and creative people across all areas to join us in rearchitecting our forward thinking business over the next few years and beyond as we evolve. Ready to Apply? If you're excited by technology, value collaboration and want to make a genuine impact, we'd love to hear from you. Click Apply to get started!
05/12/2025
Full time
Join one of the UK's largest electrical wholesalers as we reimagine our technology for the digital age. We're modernising our legacy systems and building new platforms powered by AWS and AI - and we need creative minds to help us shape the future! What You'll Do: We have a fantastic opportunity for a forward thinking, customer focused, technically minded IT Service Desk Team Lead to join our Service Operation team based in Durham. You'd be joining us at an exciting time where we are actively maturing our processes, introducing new technology and adopting a much more end user focused experience. The IT Service Desk are the face of IT with responsibility for raising, triaging and managing Incident, Service Request and Procurement tickets, as well as providing 1st Line support on a wide range of systems, applications and devices across UK, Ireland, Spain and Netherlands. As an IT Service Desk Team Lead, you will manage a team of Service Desk analysts, oversee daily operations, and ensure customer satisfaction meets the standards required. This role involves handling escalations, providing technical guidance, and improving processes through data analysis and training. The ideal candidate will have a keen eye for identifying areas for automation and use of AI to reduce burden on Service Desk, whilst delivering value back to the end-user community. What You'll Bring: Excellent Team Management and Leadership Qualities with experience managing, coaching and supporting IT service desk staff Oversee daily Service Desk performance, ensuring timely resolution of incidents, balanced workloads, and adherence to technical and quality standards. Oversee daily Service Desk performance, ensuring timely resolution of incidents, balanced workloads, and adherence to technical and quality standards. Develop team skills and implement targeted training to strengthen technical expertise and cross-team collaboration. Uphold policy and security compliance, act as technical escalation point, and collaborate with the Incident Manager during major incidents and CAB activities. Our Hiring Process: Intro call with our Talent Team - 30 mins 1st stage interview with Hiring Managers (Microsoft Teams) - 60 mins 2nd stage interview with Senior Leadership & Hiring Managers (Onsite - Durham) - 60 mins The role will be based in our award-winning IT and Marketing office, based on the outskirts of Durham found here. Hybrid working patterns are in place, with the nature of the role there will be an expectation of being in the office 3 days per week . Business travel may be required from time to time as part of this role. About Us: Founded in 1951 in Kenilworth, UK, City Electrical Factors (CEF) has grown into a world-leading electrical wholesale and manufacturing business with over 400 branches across the UK and a strong presence in the USA, Canada, Spain and Australia. Our IT and digital teams are driving the next chapter of our journey Re-engineering legacy systems, adopting modern cloud technologies and exploring AI to deliver faster, smarter and more connected customer experiences. Our teams are distributed across the UK, USA, Canada, Spain and Australia. Our culture is collaborative, forward-thinking and people-focused - where your ideas and contributions genuinely matter. Our Mission: City is a world leading electrical wholesale and manufacturing business providing electrical products to the industry. We in IT are delivering value to our business and our customers with the implementation of packaged software and bespoke engineering for the digital age using AWS serverless technology. We need talented and creative people across all areas to join us in rearchitecting our forward thinking business over the next few years and beyond as we evolve. Ready to Apply? If you're excited by technology, value collaboration and want to make a genuine impact, we'd love to hear from you. Click Apply to get started!
Join a long-established, globally operating engineering company specialising in complex automation and process solutions for highly regulated industries. With decades of technical leadership and a strong focus on innovation, this organisation delivers bespoke systems to clients worldwide supporting everything from precision manufacturing to sustainable production. You ll be part of a collaborative, future-focused team where technical excellence, global exposure and continuous improvement are part of everyday work. Test Engineer £34k - £40k + Pension, Life Assurance, Annual Bonus West Midlands Ref: 24132 Test Engineer - The Role: Responsible for testing machinery in the company's factory in Warwickshire ready for acceptance testing by customers visiting the factory to approve the equipment. This could be a stand-alone machine or a complete high speed packaging line Both Electrical and Mechanical knowledge will be required for this role, and you should have a recognised qualifications/training in at least one of these disciplines. This companies range of machinery are fully automated, so you will need a good working knowledge of automation control. Pneumatics and PLC control systems highly advantageous, but not essential. Working with both internal colleagues and sharing interactions with external clients, good interpersonal skills and be a good communication skills are required Test Engineer - The Person: Ideally you will have worked in a similar position or at least have experience in setting and testing packaging or special purpose machinery in the pharmaceutical or food packaging industry Working within a small test department, you must be a problem solver and be able to work on their own initiative and be able to work to tight timelines The majority of the role will be carried out in the production facility on site, however for Engineers who enjoy overseas travel, this could be included in the role Located in West Midlands, this role would be commutable from Redditch, Stratford upon Avon, Bromsgrove, Evesham, Warwick and surrounding areas. Role would be suitable for Engineers with experience of control panel wiring, testing and installation. Ideal for a multi-skilled Field Service Engineer, seeking an in-house, static role. For further information call Sharon Hill
05/12/2025
Full time
Join a long-established, globally operating engineering company specialising in complex automation and process solutions for highly regulated industries. With decades of technical leadership and a strong focus on innovation, this organisation delivers bespoke systems to clients worldwide supporting everything from precision manufacturing to sustainable production. You ll be part of a collaborative, future-focused team where technical excellence, global exposure and continuous improvement are part of everyday work. Test Engineer £34k - £40k + Pension, Life Assurance, Annual Bonus West Midlands Ref: 24132 Test Engineer - The Role: Responsible for testing machinery in the company's factory in Warwickshire ready for acceptance testing by customers visiting the factory to approve the equipment. This could be a stand-alone machine or a complete high speed packaging line Both Electrical and Mechanical knowledge will be required for this role, and you should have a recognised qualifications/training in at least one of these disciplines. This companies range of machinery are fully automated, so you will need a good working knowledge of automation control. Pneumatics and PLC control systems highly advantageous, but not essential. Working with both internal colleagues and sharing interactions with external clients, good interpersonal skills and be a good communication skills are required Test Engineer - The Person: Ideally you will have worked in a similar position or at least have experience in setting and testing packaging or special purpose machinery in the pharmaceutical or food packaging industry Working within a small test department, you must be a problem solver and be able to work on their own initiative and be able to work to tight timelines The majority of the role will be carried out in the production facility on site, however for Engineers who enjoy overseas travel, this could be included in the role Located in West Midlands, this role would be commutable from Redditch, Stratford upon Avon, Bromsgrove, Evesham, Warwick and surrounding areas. Role would be suitable for Engineers with experience of control panel wiring, testing and installation. Ideal for a multi-skilled Field Service Engineer, seeking an in-house, static role. For further information call Sharon Hill
This is an exciting opportunity for an experienced Executive Assistant to provide high-level administrative support within the healthcare industry. Client Details This is a well-established organisation within the healthcare industry, recognised for its innovative approach and commitment to excellence. Description Credentials & Experience Master's or bachelor's degree in Business, Computer Science, Computer Engineering, Electrical Engineering, Systems Analysis, or a related field; or equivalent experience. 8+ years of professional experience in strategic and operational planning, business analysis, or enterprise architecture consulting. 5+ years of experience focused on finance systems (ERP, EPM, Treasury, etc.). 3+ years of experience with HR Tech (e.g., Workday, SAP SuccessFactors), Legal Tech (e.g., Onit, Mitratech), and/or Procurement Tech (e.g., Coupa, Ariba). Proven experience designing architectures for: Financial close automation and regulatory reporting Integrated Hire-to-Retire and Procure-to-Pay processes Enterprise Contract Lifecycle Management Treasury, Risk & Compliance management Deep understanding of centralised and decentralised finance, HR, and procurement operating models and their technology implications. Strong fluency in financial KPIs (e.g., EBITDA, NPV, DSO) and operational KPIs (e.g., cost-per-hire, requisition-to-order cycle time), with the ability to architect systems that drive improvements Profile Skills Strong knowledge of business ecosystems, SaaS, IaaS, PaaS, SOA, APIs, open data, microservices, event-driven architecture, and predictive/data analytics. Solid understanding of business models, operating models, financial models, cost-benefit analysis, budgeting, and risk management. Familiarity with major HR, Legal, and Procurement technology platforms. Proficiency with enterprise architecture tools, graphical modelling, and EA frameworks. Insight into information management practices, SDLC, IT service management, agile/lean methodologies, infrastructure & operations, EA frameworks, and ITIL. Understanding of project-centric vs. product-centric operating models and enterprise-scaled agile methodologies. Awareness of emerging technologies and evolving processing environments. Strong leadership, interpersonal, and soft skills, with strengths in teamwork, facilitation, and negotiation. Strong consulting skills, including targeted communication, engagement management, stakeholder management, and business development. Mastery of enterprise architecture components, business/IT principles, and organisational processes. Experience applying AI/ML across corporate functions (e.g., financial anomaly detection, HR attrition prediction, procurement spend analytics). Competencies Exceptional analytical, planning, and organisational capabilities, with strong situational awareness and political acumen. Balances long-term strategic vision with short-term operational needs. Able to estimate financial impact of EA alternatives and evaluate multiple solution pathways. Quickly absorbs and evaluates new technologies and capabilities. Innovative, consultative mindset aligned with driving digital business strategy. Strong business acumen with the ability to communicate effectively with both technical and non-technical audiences. Excellent written, verbal, and presentation skills. Job Offer A competitive salary ranging from £90,000 to £125,000 per annum. An attractive bonus target of 18%. London allowance of £2,000 and a car allowance of £6,000. A permanent position based in London with 2 days on site required
04/12/2025
Full time
This is an exciting opportunity for an experienced Executive Assistant to provide high-level administrative support within the healthcare industry. Client Details This is a well-established organisation within the healthcare industry, recognised for its innovative approach and commitment to excellence. Description Credentials & Experience Master's or bachelor's degree in Business, Computer Science, Computer Engineering, Electrical Engineering, Systems Analysis, or a related field; or equivalent experience. 8+ years of professional experience in strategic and operational planning, business analysis, or enterprise architecture consulting. 5+ years of experience focused on finance systems (ERP, EPM, Treasury, etc.). 3+ years of experience with HR Tech (e.g., Workday, SAP SuccessFactors), Legal Tech (e.g., Onit, Mitratech), and/or Procurement Tech (e.g., Coupa, Ariba). Proven experience designing architectures for: Financial close automation and regulatory reporting Integrated Hire-to-Retire and Procure-to-Pay processes Enterprise Contract Lifecycle Management Treasury, Risk & Compliance management Deep understanding of centralised and decentralised finance, HR, and procurement operating models and their technology implications. Strong fluency in financial KPIs (e.g., EBITDA, NPV, DSO) and operational KPIs (e.g., cost-per-hire, requisition-to-order cycle time), with the ability to architect systems that drive improvements Profile Skills Strong knowledge of business ecosystems, SaaS, IaaS, PaaS, SOA, APIs, open data, microservices, event-driven architecture, and predictive/data analytics. Solid understanding of business models, operating models, financial models, cost-benefit analysis, budgeting, and risk management. Familiarity with major HR, Legal, and Procurement technology platforms. Proficiency with enterprise architecture tools, graphical modelling, and EA frameworks. Insight into information management practices, SDLC, IT service management, agile/lean methodologies, infrastructure & operations, EA frameworks, and ITIL. Understanding of project-centric vs. product-centric operating models and enterprise-scaled agile methodologies. Awareness of emerging technologies and evolving processing environments. Strong leadership, interpersonal, and soft skills, with strengths in teamwork, facilitation, and negotiation. Strong consulting skills, including targeted communication, engagement management, stakeholder management, and business development. Mastery of enterprise architecture components, business/IT principles, and organisational processes. Experience applying AI/ML across corporate functions (e.g., financial anomaly detection, HR attrition prediction, procurement spend analytics). Competencies Exceptional analytical, planning, and organisational capabilities, with strong situational awareness and political acumen. Balances long-term strategic vision with short-term operational needs. Able to estimate financial impact of EA alternatives and evaluate multiple solution pathways. Quickly absorbs and evaluates new technologies and capabilities. Innovative, consultative mindset aligned with driving digital business strategy. Strong business acumen with the ability to communicate effectively with both technical and non-technical audiences. Excellent written, verbal, and presentation skills. Job Offer A competitive salary ranging from £90,000 to £125,000 per annum. An attractive bonus target of 18%. London allowance of £2,000 and a car allowance of £6,000. A permanent position based in London with 2 days on site required
Control Systems EngineerLathom£50,000-£55,000 + 25 Days Holiday + Bank Holidays + Bonus Scheme + Up to 8% Pension + Training & Development Excellent opportunity for a Control Systems Engineer with PLC and SCADA experience to join an industry leader offering the chance to work on cutting-edge technology, contribute to global projects, and develop your skills within a highly technical R&D environment.This company are a global powerhouse in their field, known for world-class manufacturing, pioneering technology, and a long-standing reputation for innovation. Their R&D Process Control team plays a vital role in developing and rolling out advanced inspection and process control systems across international operations, forming a key part of their digitalisation and automation strategy.In this role you will work across the full lifecycle of process control systems - from concept through to implementation. You'll develop SCADA systems, program PLCs, create and enhance advanced control techniques (including PID, AI, and machine learning approaches), and support instrumentation and inspection tools used across global manufacturing sites. You'll collaborate with cross-functional R&D and production teams to drive process improvements, troubleshoot complex challenges, and support both on-site and remote operations. Some occasional overseas travel may be required.The ideal candidate will have experience in industrial process control, be strong with PLC and SCADA systems, and have a solid understanding of electrical/electronic principles. Candidates must have full right to work in the UK, be commutable to Lathom, and have excellent communication skills, strong problem-solving abilities, and good project/time management capabilities.This is a fantastic opportunity to join a highly technical R&D team working with global stakeholders, advance your skills with new technologies, and contribute directly to the development of next-generation control and inspection systems. The Role: Developing and enhancing process control systems from concept to implementation PLC programming, SCADA development, and advanced control techniques (including AI/ML) Delivering instrumentation and inspection solutions to support global operations Providing technical support, system upgrades, and occasional overseas travel The Person: Experience in industrial process control and PLC/SCADA systems Engineering Degree (2:1 or above preferred) Logical problem solver with strong communication skills Commutable to Lathom and full right to work in the UK Reference Number: BBBH265340 To apply for this role or to be considered for further roles, please click "Apply Now" or contact Tommy Williams at Rise Technical Recruitment.Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles.The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates.
04/12/2025
Full time
Control Systems EngineerLathom£50,000-£55,000 + 25 Days Holiday + Bank Holidays + Bonus Scheme + Up to 8% Pension + Training & Development Excellent opportunity for a Control Systems Engineer with PLC and SCADA experience to join an industry leader offering the chance to work on cutting-edge technology, contribute to global projects, and develop your skills within a highly technical R&D environment.This company are a global powerhouse in their field, known for world-class manufacturing, pioneering technology, and a long-standing reputation for innovation. Their R&D Process Control team plays a vital role in developing and rolling out advanced inspection and process control systems across international operations, forming a key part of their digitalisation and automation strategy.In this role you will work across the full lifecycle of process control systems - from concept through to implementation. You'll develop SCADA systems, program PLCs, create and enhance advanced control techniques (including PID, AI, and machine learning approaches), and support instrumentation and inspection tools used across global manufacturing sites. You'll collaborate with cross-functional R&D and production teams to drive process improvements, troubleshoot complex challenges, and support both on-site and remote operations. Some occasional overseas travel may be required.The ideal candidate will have experience in industrial process control, be strong with PLC and SCADA systems, and have a solid understanding of electrical/electronic principles. Candidates must have full right to work in the UK, be commutable to Lathom, and have excellent communication skills, strong problem-solving abilities, and good project/time management capabilities.This is a fantastic opportunity to join a highly technical R&D team working with global stakeholders, advance your skills with new technologies, and contribute directly to the development of next-generation control and inspection systems. The Role: Developing and enhancing process control systems from concept to implementation PLC programming, SCADA development, and advanced control techniques (including AI/ML) Delivering instrumentation and inspection solutions to support global operations Providing technical support, system upgrades, and occasional overseas travel The Person: Experience in industrial process control and PLC/SCADA systems Engineering Degree (2:1 or above preferred) Logical problem solver with strong communication skills Commutable to Lathom and full right to work in the UK Reference Number: BBBH265340 To apply for this role or to be considered for further roles, please click "Apply Now" or contact Tommy Williams at Rise Technical Recruitment.Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles.The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates.
Metering Engineer Clearance required: BPSS Interview process: Tech IV Location: Remote with travel at set milestones. Leads site-level technical coordination for metering deployments Participates to site surveys (so will travel a lot at the beginning) and assessments as OT technical expert (instrumentation + IT/OT integration) Strong specialist in metering technologies, instrumentation, and automation Designs and validates connectivity architecture (PLCs, SCADA, gateways, PME) Oversees configuration, commissioning, and interface validation Ensures cybersecurity compliance with the support of the Cyber SME in the central team Drives robust coms integration Manages site-level documentation, change control, and testing Provides support to xxxx local teams Experience in L&S, sustainability solutions and especially Schneider PME & RA is a plus English speaker Reports to Project managers in each Cluster (by Geo) and the lead architect in the central technical team Detailed job description from the client We are seeking a highly skilled and motivated Technical Engineer to lead the design and deployment of industrial utilities metering solutions across xxxx sites. In this pivotal role, you will be responsible for conducting site assessments, selecting appropriate meters, designing installation plans, and integrating metering systems with OT/IT infrastructure. You will also ensure all solutions comply with international standards. By enabling precise monitoring of energy and resources, you will directly contribute to THE CLIENT's sustainability objectives and drive operational excellence. Key Responsibilities Perform on-site assessments to evaluate infrastructure and feasibility for installing electricity, gas, diesel, water, and wastewater meters, addressing mechanical, electrical, civil considerations, and challenges like complex or limited pipe runs and retrofits. Analyze engineering documentation including process flow diagrams, P&IDs, and electrical single-line diagrams to identify optimal meter technologies, sizes, and installation points. Provide recommendations for metering solutions that adhere to xxxx's standards, including the appropriate selection of meter type, accuracy class, and communication protocols, based on a thorough assessment and consideration of installation complexities, hazardous areas, fluid characteristics, and physical parameters. Design and implement meter connectivity architecture by integrating with PLCs, gateways, SCADA systems, and Schneider PME platforms. Collaborate with site engineering and OT/IT teams to define network requirements and ensure compliance with cybersecurity and OT boundary controls. Provide technical input to OEMs and installation contractors, supporting procurement and commissioning activities. Document "as-is" and "to-be" metering configurations, maintaining traceable records of design decisions and lessons learned. Skills and Experience Degree or equivalent in Electrical, Instrumentation, Automation or Control Engineering. Proven experience in industrial utilities metering (electricity, gas, steam, water, wastewater), ideally within pharmaceutical or process manufacturing environments. Strong understanding of flow measurement principles and metering technologies. Deep knowledge of communication protocols including Modbus TCP/RTU, Ethernet/IP, RS-485, and pulse/analog signals. Familiarity with PLCs, gateways, SCADA systems, and PME integration. Ability to interpret technical drawings and produce structured documentation. Excellent communication and stakeholder engagement skills. Training in Hazardous Area Equipment selection and installation fundamentals. Experience with global projects and working knowledge of both local and international standards (e.g. ATEX, CSA). Skilled in handling large datasets, particularly for energy data verification Expected Deliverables Site Assessment Reports with metering gap analysis. Recommended Meter Specifications and Connectivity Designs. Meter Layout Drawings, Maintenance and Calibration guide. Bill of Materials (BoM) for procurement with clear outline of scopes. Technical validation input for cost estimation and vendor quotations.
04/12/2025
Contractor
Metering Engineer Clearance required: BPSS Interview process: Tech IV Location: Remote with travel at set milestones. Leads site-level technical coordination for metering deployments Participates to site surveys (so will travel a lot at the beginning) and assessments as OT technical expert (instrumentation + IT/OT integration) Strong specialist in metering technologies, instrumentation, and automation Designs and validates connectivity architecture (PLCs, SCADA, gateways, PME) Oversees configuration, commissioning, and interface validation Ensures cybersecurity compliance with the support of the Cyber SME in the central team Drives robust coms integration Manages site-level documentation, change control, and testing Provides support to xxxx local teams Experience in L&S, sustainability solutions and especially Schneider PME & RA is a plus English speaker Reports to Project managers in each Cluster (by Geo) and the lead architect in the central technical team Detailed job description from the client We are seeking a highly skilled and motivated Technical Engineer to lead the design and deployment of industrial utilities metering solutions across xxxx sites. In this pivotal role, you will be responsible for conducting site assessments, selecting appropriate meters, designing installation plans, and integrating metering systems with OT/IT infrastructure. You will also ensure all solutions comply with international standards. By enabling precise monitoring of energy and resources, you will directly contribute to THE CLIENT's sustainability objectives and drive operational excellence. Key Responsibilities Perform on-site assessments to evaluate infrastructure and feasibility for installing electricity, gas, diesel, water, and wastewater meters, addressing mechanical, electrical, civil considerations, and challenges like complex or limited pipe runs and retrofits. Analyze engineering documentation including process flow diagrams, P&IDs, and electrical single-line diagrams to identify optimal meter technologies, sizes, and installation points. Provide recommendations for metering solutions that adhere to xxxx's standards, including the appropriate selection of meter type, accuracy class, and communication protocols, based on a thorough assessment and consideration of installation complexities, hazardous areas, fluid characteristics, and physical parameters. Design and implement meter connectivity architecture by integrating with PLCs, gateways, SCADA systems, and Schneider PME platforms. Collaborate with site engineering and OT/IT teams to define network requirements and ensure compliance with cybersecurity and OT boundary controls. Provide technical input to OEMs and installation contractors, supporting procurement and commissioning activities. Document "as-is" and "to-be" metering configurations, maintaining traceable records of design decisions and lessons learned. Skills and Experience Degree or equivalent in Electrical, Instrumentation, Automation or Control Engineering. Proven experience in industrial utilities metering (electricity, gas, steam, water, wastewater), ideally within pharmaceutical or process manufacturing environments. Strong understanding of flow measurement principles and metering technologies. Deep knowledge of communication protocols including Modbus TCP/RTU, Ethernet/IP, RS-485, and pulse/analog signals. Familiarity with PLCs, gateways, SCADA systems, and PME integration. Ability to interpret technical drawings and produce structured documentation. Excellent communication and stakeholder engagement skills. Training in Hazardous Area Equipment selection and installation fundamentals. Experience with global projects and working knowledge of both local and international standards (e.g. ATEX, CSA). Skilled in handling large datasets, particularly for energy data verification Expected Deliverables Site Assessment Reports with metering gap analysis. Recommended Meter Specifications and Connectivity Designs. Meter Layout Drawings, Maintenance and Calibration guide. Bill of Materials (BoM) for procurement with clear outline of scopes. Technical validation input for cost estimation and vendor quotations.
Electronics Test Engineer - Durham, UK Full-Time Permanent Competitive Salary Are you an experienced Electronics Test Engineer with strong LabVIEW programming skills? Our client, a leading manufacturer of rechargeable battery solutions based in Durham, is looking for a proactive and innovative engineer to join their Engineering team. This position is ideal for someone who wants to take ownership of LabVIEW-driven automated test development and play a key role in the testing and validation of cutting-edge battery technology. About the Role In this role, you will support the Senior Electronics Test Engineer in the development and testing of new rechargeable battery products. A major focus of the position is the design, development, and improvement of automated test equipment, where LabVIEW is the primary development tool. You will collaborate closely with technicians, production, NPI, and quality teams to deliver reliable, high-performing test solutions. If you enjoy problem-solving, automation, and building robust test systems from the ground up, this role offers a fantastic opportunity to grow and make a significant impact. Key Responsibilities Test Design & Execution Design and execute test plans for new battery products under development. Develop detailed test specifications aligned with customer requirements and SPQP standards. Conduct failure mode analysis and support prevention activities to improve product reliability. Equipment Development & Maintenance Design, develop, and validate automated test equipment and fixtures, with LabVIEW as the primary programming environment. Maintain and improve existing LabVIEW-driven test systems to ensure accuracy, efficiency, and long-term reliability. Manage version control of compiled firmware (hex files) and provide support for programming fixtures. Production & Technical Support Provide expert troubleshooting support to production teams, particularly on LabVIEW automated systems. Deliver training and guidance to Electronics Technicians on test processes and equipment. Contribute to PFMEA activities and support testing requirements throughout the NPI process. Quality, Validation & Reporting Validate all test equipment and fixtures in line with company and industry standards. Maintain accurate documentation in accordance with quality management systems. Prepare detailed test reports and communicate results clearly to internal teams and customers. Skills, Experience & Qualifications The successful candidate will demonstrate: A degree in Electrical or Electronic Engineering (BEng) or equivalent experience. Previous experience in an electronics test engineering or manufacturing environment. Advanced LabVIEW programming experience is essential, including use of existing VI libraries and developing new automated test sequences. (This is a core component of the role.) Additional programming experience in C# and Arduino platforms (desirable). Experience using SQL databases for test data acquisition and analysis. Strong fault-finding and troubleshooting skills across both test equipment and electronic assemblies. Excellent written and verbal communication skills. A highly organised and self-motivated approach, with the ability to adapt to changing priorities. Why LabVIEW Expertise Matters in This Role The Engineering team relies heavily on LabVIEW to design, automate, and maintain test systems used in battery pack manufacturing. Your expertise will directly influence test accuracy, production efficiency, product reliability, and the success of new product introductions. This role offers the chance to lead continuous improvement initiatives and shape the future of automated testing within the business. How to Apply If you are keen, please email your CV to or call / to discuss the role further. JBRP1_UKTJ
04/12/2025
Full time
Electronics Test Engineer - Durham, UK Full-Time Permanent Competitive Salary Are you an experienced Electronics Test Engineer with strong LabVIEW programming skills? Our client, a leading manufacturer of rechargeable battery solutions based in Durham, is looking for a proactive and innovative engineer to join their Engineering team. This position is ideal for someone who wants to take ownership of LabVIEW-driven automated test development and play a key role in the testing and validation of cutting-edge battery technology. About the Role In this role, you will support the Senior Electronics Test Engineer in the development and testing of new rechargeable battery products. A major focus of the position is the design, development, and improvement of automated test equipment, where LabVIEW is the primary development tool. You will collaborate closely with technicians, production, NPI, and quality teams to deliver reliable, high-performing test solutions. If you enjoy problem-solving, automation, and building robust test systems from the ground up, this role offers a fantastic opportunity to grow and make a significant impact. Key Responsibilities Test Design & Execution Design and execute test plans for new battery products under development. Develop detailed test specifications aligned with customer requirements and SPQP standards. Conduct failure mode analysis and support prevention activities to improve product reliability. Equipment Development & Maintenance Design, develop, and validate automated test equipment and fixtures, with LabVIEW as the primary programming environment. Maintain and improve existing LabVIEW-driven test systems to ensure accuracy, efficiency, and long-term reliability. Manage version control of compiled firmware (hex files) and provide support for programming fixtures. Production & Technical Support Provide expert troubleshooting support to production teams, particularly on LabVIEW automated systems. Deliver training and guidance to Electronics Technicians on test processes and equipment. Contribute to PFMEA activities and support testing requirements throughout the NPI process. Quality, Validation & Reporting Validate all test equipment and fixtures in line with company and industry standards. Maintain accurate documentation in accordance with quality management systems. Prepare detailed test reports and communicate results clearly to internal teams and customers. Skills, Experience & Qualifications The successful candidate will demonstrate: A degree in Electrical or Electronic Engineering (BEng) or equivalent experience. Previous experience in an electronics test engineering or manufacturing environment. Advanced LabVIEW programming experience is essential, including use of existing VI libraries and developing new automated test sequences. (This is a core component of the role.) Additional programming experience in C# and Arduino platforms (desirable). Experience using SQL databases for test data acquisition and analysis. Strong fault-finding and troubleshooting skills across both test equipment and electronic assemblies. Excellent written and verbal communication skills. A highly organised and self-motivated approach, with the ability to adapt to changing priorities. Why LabVIEW Expertise Matters in This Role The Engineering team relies heavily on LabVIEW to design, automate, and maintain test systems used in battery pack manufacturing. Your expertise will directly influence test accuracy, production efficiency, product reliability, and the success of new product introductions. This role offers the chance to lead continuous improvement initiatives and shape the future of automated testing within the business. How to Apply If you are keen, please email your CV to or call / to discuss the role further. JBRP1_UKTJ
As a global leader in label and packaging finishing systems, this organisation specialises in high-performance converting solutions for self-adhesive labels, shrink sleeves and flexible packaging. Through advanced print-finishing and automation technology, it supports product development, short-run production and large-scale manufacturing across packaging, logistics, pharmaceuticals and consumer goods. Renowned for precision engineering, bespoke system integration and outstanding service, the business continues to drive innovation in finishing automation and materials conversion; delivering reliable, high-quality solutions to customers worldwide. Lead Control Systems Engineer Competitive Salary + Healthcare Package, Company Pension Scheme 8% DIS, 33 days holiday including stats, Annual Bonus Yorkshire - With Hybrid Working. Ref: 25008 You will lead the Electrical Engineering and Software development of automated machines, ensuring the delivery of robust, compliant and high-quality automation solutions. Develop and maintain robust processes to ensure the timely release of all product definitions, including engineering models, drawings, BOMs and software. Collaborate closely with customers, suppliers and internal teams: Sales, Drawing Office, Manufacturing and Purchasing; to gather requirements and ensure on-time product releases. Lead the design and implementation of electrical and software solutions that meet customer specifications and performance expectations. Provide technical support and guidance to Production and Service teams on electrical and software-related issues. Implement and maintain management systems that ensure machinery complies with all relevant industry standards, legislation and regulatory requirements. The successful candidate will have experience coordinating or working within cross-functional teams, including software, electrical, manufacturing and service departments. They will be a confident communicator, highly organised, and committed to continuous improvement in all aspects of their work. A qualification in Electrical, Electronic or Control Systems Engineering (HNC/HND/Degree or equivalent). Proven experience working within automation, machinery or industrial engineering environments. Strong technical knowledge of PLC, HMI and motion control systems (e.g. Siemens, Allen Bradley, Beckhoff). An excellent understanding of electrical design, control panel layouts and systems integration principles. Experience managing engineering projects from concept through to delivery, ensuring compliance with relevant industry standards and safety regulations. An analytical, proactive mindset, with a strong commitment to continuous improvement and effective problem-solving. This is an exceptional opportunity to step into a pivotal leadership role. You will elevate your already strong automation design and development skills by leading a talented, close-knit team focused on the research and development of market-leading machinery for a truly global marketplace. With manufacturing facilities across Europe and a robust, forward-thinking strategy, this dynamic and resilient organisation is experiencing sustained growth, supported by a full order book. It s an ideal time to join a business with stability, ambition and a clear vision for continued innovation. For further information call Sharon Hill on: (phone number removed) or (phone number removed).
04/12/2025
Full time
As a global leader in label and packaging finishing systems, this organisation specialises in high-performance converting solutions for self-adhesive labels, shrink sleeves and flexible packaging. Through advanced print-finishing and automation technology, it supports product development, short-run production and large-scale manufacturing across packaging, logistics, pharmaceuticals and consumer goods. Renowned for precision engineering, bespoke system integration and outstanding service, the business continues to drive innovation in finishing automation and materials conversion; delivering reliable, high-quality solutions to customers worldwide. Lead Control Systems Engineer Competitive Salary + Healthcare Package, Company Pension Scheme 8% DIS, 33 days holiday including stats, Annual Bonus Yorkshire - With Hybrid Working. Ref: 25008 You will lead the Electrical Engineering and Software development of automated machines, ensuring the delivery of robust, compliant and high-quality automation solutions. Develop and maintain robust processes to ensure the timely release of all product definitions, including engineering models, drawings, BOMs and software. Collaborate closely with customers, suppliers and internal teams: Sales, Drawing Office, Manufacturing and Purchasing; to gather requirements and ensure on-time product releases. Lead the design and implementation of electrical and software solutions that meet customer specifications and performance expectations. Provide technical support and guidance to Production and Service teams on electrical and software-related issues. Implement and maintain management systems that ensure machinery complies with all relevant industry standards, legislation and regulatory requirements. The successful candidate will have experience coordinating or working within cross-functional teams, including software, electrical, manufacturing and service departments. They will be a confident communicator, highly organised, and committed to continuous improvement in all aspects of their work. A qualification in Electrical, Electronic or Control Systems Engineering (HNC/HND/Degree or equivalent). Proven experience working within automation, machinery or industrial engineering environments. Strong technical knowledge of PLC, HMI and motion control systems (e.g. Siemens, Allen Bradley, Beckhoff). An excellent understanding of electrical design, control panel layouts and systems integration principles. Experience managing engineering projects from concept through to delivery, ensuring compliance with relevant industry standards and safety regulations. An analytical, proactive mindset, with a strong commitment to continuous improvement and effective problem-solving. This is an exceptional opportunity to step into a pivotal leadership role. You will elevate your already strong automation design and development skills by leading a talented, close-knit team focused on the research and development of market-leading machinery for a truly global marketplace. With manufacturing facilities across Europe and a robust, forward-thinking strategy, this dynamic and resilient organisation is experiencing sustained growth, supported by a full order book. It s an ideal time to join a business with stability, ambition and a clear vision for continued innovation. For further information call Sharon Hill on: (phone number removed) or (phone number removed).
A leading multidisciplinary design and build contractor in the UK with over a century of industry experience are currently on the lookout for a Control Engineers to join a dynamic team and contribute to ongoing success in the Water, Power & Energy, Pharmaceutical, and Food and Beverage sectors. This company prides themselves on being at the forefront of value-added engineering. They have a strong track record of supporting blue-chip clients across various industries, with a cultivated culture that promotes personal development and ensures the safety of our employees. Control Engineers £40,000 - £50,000 + Private Healthcare, Overtime, Pension, Expenses Opportunities for personal development within a company culture that prioritises employee safety Staffordshire based role Ref: 23686 Control Engineer - The Role: Take charge of delivering automation projects to our clients, overseeing the entire project lifecycle from design documentation to commissioning and handover Work on complex control system projects Engage with multiple stakeholders, including SI and LV engineering delivery teams and client representatives Control Engineer - The Person: A minimum of 3 years of systems engineering experience Strong knowledge of safe working practices regarding electrical equipment Proficiency in PLC and HMI software development, using devices from at least two manufacturers such as Rockwell Automation, Siemens, Mitsubishi, or Schneider. Experience with various communication protocols and SCADA systems A positive, approachable attitude A full UK driving licence - 20-30% travel - UK only If you are a Control Engineer looking for a challenging role within a company that values its employees and offers excellent opportunities for personal and professional growth, we'd love to hear from you. Apply today and take the next step in your career Position is based in Stafford. For further information call Sharon Hill
04/12/2025
Full time
A leading multidisciplinary design and build contractor in the UK with over a century of industry experience are currently on the lookout for a Control Engineers to join a dynamic team and contribute to ongoing success in the Water, Power & Energy, Pharmaceutical, and Food and Beverage sectors. This company prides themselves on being at the forefront of value-added engineering. They have a strong track record of supporting blue-chip clients across various industries, with a cultivated culture that promotes personal development and ensures the safety of our employees. Control Engineers £40,000 - £50,000 + Private Healthcare, Overtime, Pension, Expenses Opportunities for personal development within a company culture that prioritises employee safety Staffordshire based role Ref: 23686 Control Engineer - The Role: Take charge of delivering automation projects to our clients, overseeing the entire project lifecycle from design documentation to commissioning and handover Work on complex control system projects Engage with multiple stakeholders, including SI and LV engineering delivery teams and client representatives Control Engineer - The Person: A minimum of 3 years of systems engineering experience Strong knowledge of safe working practices regarding electrical equipment Proficiency in PLC and HMI software development, using devices from at least two manufacturers such as Rockwell Automation, Siemens, Mitsubishi, or Schneider. Experience with various communication protocols and SCADA systems A positive, approachable attitude A full UK driving licence - 20-30% travel - UK only If you are a Control Engineer looking for a challenging role within a company that values its employees and offers excellent opportunities for personal and professional growth, we'd love to hear from you. Apply today and take the next step in your career Position is based in Stafford. For further information call Sharon Hill
We are looking for a highly skilled Senior Automation Engineer to lead complex automation projects, support continuous improvement across company operations, and provide senior-level expertise in PLC programming, control systems and machine safety. This is an excellent opportunity for an experienced engineer to take ownership of major automation initiatives within a growing organisation. Control & Automation Engineer £50-70k + Flexible Hours + Company Vehicle + Overtime East Yorkshire Ref- 24778 Lead the design, development, and optimisation of PLC-based automation systems Oversee the design, build, and maintenance of electrical control panels Produce, review, and approve electrical drawings using AutoCAD and/or EPLAN Interpret and troubleshoot electrical and panel schematics Provide technical leadership during machine build, installation, and commissioning Ensure full compliance with industrial, electrical, and machine safety standards Work with power systems and electrical system design Design, integrate, and support SCADA systems Support and optimise pneumatic systems and automation components Apply ATEX requirements and ensure safe working practices in hazardous areas Act as a senior point of contact for manufacturing support, including food and industrial environments Mentor junior engineers and support technical decision-making across teams Travel to customer sites as required (valid driving licence essential) Research and analyse customer requirements to identify effective control and automation solutions. Requirements: Strong, proven PLC programming experience Extensive experience in control panel design/build/maintenance Full driving licence Experience with power systems and electrical design Proficiency with AutoCAD and/or EPLAN Manufacturing environment experience (food industry beneficial) Demonstrated knowledge of industrial safety and machine safety SCADA system experience ATEX knowledge and hazardous area experience Strong understanding of pneumatic systems Excellent troubleshooting skills and the ability to lead complex technical projects For further information call Sharon Hill
04/12/2025
Full time
We are looking for a highly skilled Senior Automation Engineer to lead complex automation projects, support continuous improvement across company operations, and provide senior-level expertise in PLC programming, control systems and machine safety. This is an excellent opportunity for an experienced engineer to take ownership of major automation initiatives within a growing organisation. Control & Automation Engineer £50-70k + Flexible Hours + Company Vehicle + Overtime East Yorkshire Ref- 24778 Lead the design, development, and optimisation of PLC-based automation systems Oversee the design, build, and maintenance of electrical control panels Produce, review, and approve electrical drawings using AutoCAD and/or EPLAN Interpret and troubleshoot electrical and panel schematics Provide technical leadership during machine build, installation, and commissioning Ensure full compliance with industrial, electrical, and machine safety standards Work with power systems and electrical system design Design, integrate, and support SCADA systems Support and optimise pneumatic systems and automation components Apply ATEX requirements and ensure safe working practices in hazardous areas Act as a senior point of contact for manufacturing support, including food and industrial environments Mentor junior engineers and support technical decision-making across teams Travel to customer sites as required (valid driving licence essential) Research and analyse customer requirements to identify effective control and automation solutions. Requirements: Strong, proven PLC programming experience Extensive experience in control panel design/build/maintenance Full driving licence Experience with power systems and electrical design Proficiency with AutoCAD and/or EPLAN Manufacturing environment experience (food industry beneficial) Demonstrated knowledge of industrial safety and machine safety SCADA system experience ATEX knowledge and hazardous area experience Strong understanding of pneumatic systems Excellent troubleshooting skills and the ability to lead complex technical projects For further information call Sharon Hill
Join this UK-based engineering company with a global footprint, specialising in bespoke automation and control systems across industries including manufacturing, utilities and infrastructure. With decades of experience and a global reach, the company has successfully designed and commissioned control systems throughout the UK and Europe. Benefits include exposure to international engineering challenges and professional development through hands-on technical work and training. A collaborative and skilled team environment awaits offering a strong focus on innovation and career growth. Control Systems Engineer £40-55k - Earn £60k + Pension + Expenses + Xmas Bonus + Site Uplifts West Midlands. Ref: 18723 Control Systems Engineer - The Role: Work on innovative projects across a number of sectors with current projects focusing on renewable energy, water treatment and hydrogen production. Work with a blue-chip client base. Full project control from functional designs, through to site commissioning. Design, documentation, development & testing of a variety of PLC & SCADA systems, predominantly with Siemens and Rockwell Site Commissioning to locations within the UK Worldwide project opportunities available Control Systems Engineer - The Person: Previous experience working within the Control Systems sector, preferably within the water, utilities & power generation industries Experience / exposure to PLC/SCADA packages. You will be trained in product specific packages: specification, design, programming, testing, documentation & commissioning Any understanding and practical experience of panel hardware/hardware interfaces or low voltage electrical skills to aid testing and commissioning is desirable but not essential Willingness to travel to customer sites Worldwide, as required on occasions Work with an experienced team supporting specialist technical areas of functional safety, cyber security or PCS7. This is an excellent opportunity for a flexible and keen Engineer looking to expand and diversify their experience Located in West Midlands, this role would be commutable from Worcester, Bromsgrove, Droitwich Spa, Halesowen, Stratford upon Avon, Kenilworth, Solihull, Cheltenham, Hereford, Malvern & Kidderminster. For further information call Sharon HIll
04/12/2025
Full time
Join this UK-based engineering company with a global footprint, specialising in bespoke automation and control systems across industries including manufacturing, utilities and infrastructure. With decades of experience and a global reach, the company has successfully designed and commissioned control systems throughout the UK and Europe. Benefits include exposure to international engineering challenges and professional development through hands-on technical work and training. A collaborative and skilled team environment awaits offering a strong focus on innovation and career growth. Control Systems Engineer £40-55k - Earn £60k + Pension + Expenses + Xmas Bonus + Site Uplifts West Midlands. Ref: 18723 Control Systems Engineer - The Role: Work on innovative projects across a number of sectors with current projects focusing on renewable energy, water treatment and hydrogen production. Work with a blue-chip client base. Full project control from functional designs, through to site commissioning. Design, documentation, development & testing of a variety of PLC & SCADA systems, predominantly with Siemens and Rockwell Site Commissioning to locations within the UK Worldwide project opportunities available Control Systems Engineer - The Person: Previous experience working within the Control Systems sector, preferably within the water, utilities & power generation industries Experience / exposure to PLC/SCADA packages. You will be trained in product specific packages: specification, design, programming, testing, documentation & commissioning Any understanding and practical experience of panel hardware/hardware interfaces or low voltage electrical skills to aid testing and commissioning is desirable but not essential Willingness to travel to customer sites Worldwide, as required on occasions Work with an experienced team supporting specialist technical areas of functional safety, cyber security or PCS7. This is an excellent opportunity for a flexible and keen Engineer looking to expand and diversify their experience Located in West Midlands, this role would be commutable from Worcester, Bromsgrove, Droitwich Spa, Halesowen, Stratford upon Avon, Kenilworth, Solihull, Cheltenham, Hereford, Malvern & Kidderminster. For further information call Sharon HIll
Metering Engineer Clearance required: BPSS Interview process: Tech IV Location: Remote with travel at set milestones. IR35 Status: PAYE via Umbrella company only Job Description: . Leads site-level technical coordination for metering deployments . Participates to site surveys (so will travel a lot at the beginning) and assessments as OT technical expert (instrumentation + IT/OT integration) . Strong specialist in metering technologies, instrumentation, and automation . Designs and validates connectivity architecture (PLCs, SCADA, gateways, PME) . Oversees configuration, commissioning, and interface validation . Ensures cybersecurity compliance with the support of the Cyber SME in the central team . Drives robust coms integration . Manages site-level documentation, change control, and testing . Provides support to xxxx local teams . Experience in L&S, sustainability solutions and especially Schneider PME & RA is a plus . English speaker . Reports to Project managers in each Cluster (by Geo) and the lead architect in the central technical team Detailed job description from the client We are seeking a highly skilled and motivated Technical Engineer to lead the design and deployment of industrial utilities metering solutions across xxxx sites. In this pivotal role, you will be responsible for conducting site assessments, selecting appropriate meters, designing installation plans, and integrating metering systems with OT/IT infrastructure. You will also ensure all solutions comply with international standards. By enabling precise monitoring of energy and resources, you will directly contribute to THE CLIENT's sustainability objectives and drive operational excellence. Key Responsibilities Perform on-site assessments to evaluate infrastructure and feasibility for installing electricity, gas, diesel, water, and wastewater meters, addressing mechanical, electrical, civil considerations, and challenges like complex or limited pipe runs and retrofits. Analyze engineering documentation including process flow diagrams, P&IDs, and electrical single-line diagrams to identify optimal meter technologies, sizes, and installation points. Provide recommendations for metering solutions that adhere to xxxx's standards, including the appropriate selection of meter type, accuracy class, and communication protocols, based on a thorough assessment and consideration of installation complexities, hazardous areas, fluid characteristics, and physical parameters. Design and implement meter connectivity architecture by integrating with PLCs, gateways, SCADA systems, and Schneider PME platforms. Collaborate with site engineering and OT/IT teams to define network requirements and ensure compliance with cybersecurity and OT boundary controls. Provide technical input to OEMs and installation contractors, supporting procurement and commissioning activities. Document as-is and to-be metering configurations, maintaining traceable records of design decisions and lessons learned. Skills and Experience Degree or equivalent in Electrical, Instrumentation, Automation or Control Engineering. Proven experience in industrial utilities metering (electricity, gas, steam, water, wastewater), ideally within pharmaceutical or process manufacturing environments. Strong understanding of flow measurement principles and metering technologies. Deep knowledge of communication protocols including Modbus TCP/RTU, Ethernet/IP, RS-485, and pulse/analog signals. Familiarity with PLCs, gateways, SCADA systems, and PME integration. Ability to interpret technical drawings and produce structured documentation. Excellent communication and stakeholder engagement skills. Training in Hazardous Area Equipment selection and installation fundamentals. Experience with global projects and working knowledge of both local and international standards (eg ATEX, CSA). Skilled in handling large datasets, particularly for energy data verification Expected Deliverables Site Assessment Reports with metering gap analysis. Recommended Meter Specifications and Connectivity Designs. Meter Layout Drawings, Maintenance and Calibration guide. Bill of Materials (BoM) for procurement with clear outline of scopes. Technical validation input for cost estimation and vendor quotations. Behavioral Competencies Aligned with xxxx's values and expectations, the ideal candidate will demonstrate: Integrity & Transparency: Upholding high ethical standards and communicating openly. Respect & Inclusion: Supporting colleagues and embracing diverse perspectives. Accountability: Taking ownership and delivering on commitments. Courage & Development: Seeking innovation, learning from feedback, and adapting to change. Teamwork: Collaborating effectively across functions to achieve shared goals.
04/12/2025
Contractor
Metering Engineer Clearance required: BPSS Interview process: Tech IV Location: Remote with travel at set milestones. IR35 Status: PAYE via Umbrella company only Job Description: . Leads site-level technical coordination for metering deployments . Participates to site surveys (so will travel a lot at the beginning) and assessments as OT technical expert (instrumentation + IT/OT integration) . Strong specialist in metering technologies, instrumentation, and automation . Designs and validates connectivity architecture (PLCs, SCADA, gateways, PME) . Oversees configuration, commissioning, and interface validation . Ensures cybersecurity compliance with the support of the Cyber SME in the central team . Drives robust coms integration . Manages site-level documentation, change control, and testing . Provides support to xxxx local teams . Experience in L&S, sustainability solutions and especially Schneider PME & RA is a plus . English speaker . Reports to Project managers in each Cluster (by Geo) and the lead architect in the central technical team Detailed job description from the client We are seeking a highly skilled and motivated Technical Engineer to lead the design and deployment of industrial utilities metering solutions across xxxx sites. In this pivotal role, you will be responsible for conducting site assessments, selecting appropriate meters, designing installation plans, and integrating metering systems with OT/IT infrastructure. You will also ensure all solutions comply with international standards. By enabling precise monitoring of energy and resources, you will directly contribute to THE CLIENT's sustainability objectives and drive operational excellence. Key Responsibilities Perform on-site assessments to evaluate infrastructure and feasibility for installing electricity, gas, diesel, water, and wastewater meters, addressing mechanical, electrical, civil considerations, and challenges like complex or limited pipe runs and retrofits. Analyze engineering documentation including process flow diagrams, P&IDs, and electrical single-line diagrams to identify optimal meter technologies, sizes, and installation points. Provide recommendations for metering solutions that adhere to xxxx's standards, including the appropriate selection of meter type, accuracy class, and communication protocols, based on a thorough assessment and consideration of installation complexities, hazardous areas, fluid characteristics, and physical parameters. Design and implement meter connectivity architecture by integrating with PLCs, gateways, SCADA systems, and Schneider PME platforms. Collaborate with site engineering and OT/IT teams to define network requirements and ensure compliance with cybersecurity and OT boundary controls. Provide technical input to OEMs and installation contractors, supporting procurement and commissioning activities. Document as-is and to-be metering configurations, maintaining traceable records of design decisions and lessons learned. Skills and Experience Degree or equivalent in Electrical, Instrumentation, Automation or Control Engineering. Proven experience in industrial utilities metering (electricity, gas, steam, water, wastewater), ideally within pharmaceutical or process manufacturing environments. Strong understanding of flow measurement principles and metering technologies. Deep knowledge of communication protocols including Modbus TCP/RTU, Ethernet/IP, RS-485, and pulse/analog signals. Familiarity with PLCs, gateways, SCADA systems, and PME integration. Ability to interpret technical drawings and produce structured documentation. Excellent communication and stakeholder engagement skills. Training in Hazardous Area Equipment selection and installation fundamentals. Experience with global projects and working knowledge of both local and international standards (eg ATEX, CSA). Skilled in handling large datasets, particularly for energy data verification Expected Deliverables Site Assessment Reports with metering gap analysis. Recommended Meter Specifications and Connectivity Designs. Meter Layout Drawings, Maintenance and Calibration guide. Bill of Materials (BoM) for procurement with clear outline of scopes. Technical validation input for cost estimation and vendor quotations. Behavioral Competencies Aligned with xxxx's values and expectations, the ideal candidate will demonstrate: Integrity & Transparency: Upholding high ethical standards and communicating openly. Respect & Inclusion: Supporting colleagues and embracing diverse perspectives. Accountability: Taking ownership and delivering on commitments. Courage & Development: Seeking innovation, learning from feedback, and adapting to change. Teamwork: Collaborating effectively across functions to achieve shared goals.
We are a Global Recruitment specialist that provides support to the clients across EMEA, APAC, US and Canada Job Title: Metering Engineer Clearance required: BPSS Contract: 20 Months Location: Remote with travel at set milestones. IR35 Status: PAYE via Umbrella company only Job Description: Leads site-level technical coordination for metering deployments Participates to site surveys (so will travel a lot at the beginning) and assessments as OT technical expert (instrumentation + IT/OT integration) Strong specialist in metering technologies, instrumentation, and automation Designs and validates connectivity architecture (PLCs, SCADA, gateways, PME) Oversees configuration, commissioning, and interface validation Ensures cybersecurity compliance with the support of the Cyber SME in the central team Drives robust coms integration Manages site-level documentation, change control, and testing Provides support to xxxx local teams Experience in L&S, sustainability solutions and especially Schneider PME & RA is a plus English speaker Reports to Project managers in each Cluster (by Geo) and the lead architect in the central technical team Detailed job description from the client We are seeking a highly skilled and motivated Technical Engineer to lead the design and deployment of industrial utilities metering solutions across xxxx sites. In this pivotal role, you will be responsible for conducting site assessments, selecting appropriate meters, designing installation plans, and integrating metering systems with OT/IT infrastructure. You will also ensure all solutions comply with international standards. By enabling precise monitoring of energy and resources, you will directly contribute to THE CLIENT's sustainability objectives and drive operational excellence. Key Responsibilities Perform on-site assessments to evaluate infrastructure and feasibility for installing electricity, gas, diesel, water, and wastewater meters, addressing mechanical, electrical, civil considerations, and challenges like complex or limited pipe runs and retrofits. Analyze engineering documentation including process flow diagrams, P&IDs, and electrical single-line diagrams to identify optimal meter technologies, sizes, and installation points. Provide recommendations for metering solutions that adhere to xxxx's standards, including the appropriate selection of meter type, accuracy class, and communication protocols, based on a thorough assessment and consideration of installation complexities, hazardous areas, fluid characteristics, and physical parameters. Design and implement meter connectivity architecture by integrating with PLCs, gateways, SCADA systems, and Schneider PME platforms. Collaborate with site engineering and OT/IT teams to define network requirements and ensure compliance with cybersecurity and OT boundary controls. Provide technical input to OEMs and installation contractors, supporting procurement and commissioning activities. Document as-is and to-be metering configurations, maintaining traceable records of design decisions and lessons learned. Skills and Experience Degree or equivalent in Electrical, Instrumentation, Automation or Control Engineering. Proven experience in industrial utilities metering (electricity, gas, steam, water, wastewater), ideally within pharmaceutical or process manufacturing environments. Strong understanding of flow measurement principles and metering technologies. Deep knowledge of communication protocols including Modbus TCP/RTU, Ethernet/IP, RS-485, and pulse/analog signals. Familiarity with PLCs, gateways, SCADA systems, and PME integration. Ability to interpret technical drawings and produce structured documentation. Excellent communication and stakeholder engagement skills. Training in Hazardous Area Equipment selection and installation fundamentals. Experience with global projects and working knowledge of both local and international standards (eg ATEX, CSA). Skilled in handling large datasets, particularly for energy data verification Expected Deliverables Site Assessment Reports with metering gap analysis. Recommended Meter Specifications and Connectivity Designs. Meter Layout Drawings, Maintenance and Calibration guide. Bill of Materials (BoM) for procurement with clear outline of scopes. Technical validation input for cost estimation and vendor quotations. Behavioral Competencies Integrity & Transparency: Upholding high ethical standards and communicating openly. Respect & Inclusion: Supporting colleagues and embracing diverse perspectives. Accountability: Taking ownership and delivering on commitments. Courage & Development: Seeking innovation, learning from feedback, and adapting to change. Teamwork: Collaborating effectively across functions to achieve shared goals.
04/12/2025
Contractor
We are a Global Recruitment specialist that provides support to the clients across EMEA, APAC, US and Canada Job Title: Metering Engineer Clearance required: BPSS Contract: 20 Months Location: Remote with travel at set milestones. IR35 Status: PAYE via Umbrella company only Job Description: Leads site-level technical coordination for metering deployments Participates to site surveys (so will travel a lot at the beginning) and assessments as OT technical expert (instrumentation + IT/OT integration) Strong specialist in metering technologies, instrumentation, and automation Designs and validates connectivity architecture (PLCs, SCADA, gateways, PME) Oversees configuration, commissioning, and interface validation Ensures cybersecurity compliance with the support of the Cyber SME in the central team Drives robust coms integration Manages site-level documentation, change control, and testing Provides support to xxxx local teams Experience in L&S, sustainability solutions and especially Schneider PME & RA is a plus English speaker Reports to Project managers in each Cluster (by Geo) and the lead architect in the central technical team Detailed job description from the client We are seeking a highly skilled and motivated Technical Engineer to lead the design and deployment of industrial utilities metering solutions across xxxx sites. In this pivotal role, you will be responsible for conducting site assessments, selecting appropriate meters, designing installation plans, and integrating metering systems with OT/IT infrastructure. You will also ensure all solutions comply with international standards. By enabling precise monitoring of energy and resources, you will directly contribute to THE CLIENT's sustainability objectives and drive operational excellence. Key Responsibilities Perform on-site assessments to evaluate infrastructure and feasibility for installing electricity, gas, diesel, water, and wastewater meters, addressing mechanical, electrical, civil considerations, and challenges like complex or limited pipe runs and retrofits. Analyze engineering documentation including process flow diagrams, P&IDs, and electrical single-line diagrams to identify optimal meter technologies, sizes, and installation points. Provide recommendations for metering solutions that adhere to xxxx's standards, including the appropriate selection of meter type, accuracy class, and communication protocols, based on a thorough assessment and consideration of installation complexities, hazardous areas, fluid characteristics, and physical parameters. Design and implement meter connectivity architecture by integrating with PLCs, gateways, SCADA systems, and Schneider PME platforms. Collaborate with site engineering and OT/IT teams to define network requirements and ensure compliance with cybersecurity and OT boundary controls. Provide technical input to OEMs and installation contractors, supporting procurement and commissioning activities. Document as-is and to-be metering configurations, maintaining traceable records of design decisions and lessons learned. Skills and Experience Degree or equivalent in Electrical, Instrumentation, Automation or Control Engineering. Proven experience in industrial utilities metering (electricity, gas, steam, water, wastewater), ideally within pharmaceutical or process manufacturing environments. Strong understanding of flow measurement principles and metering technologies. Deep knowledge of communication protocols including Modbus TCP/RTU, Ethernet/IP, RS-485, and pulse/analog signals. Familiarity with PLCs, gateways, SCADA systems, and PME integration. Ability to interpret technical drawings and produce structured documentation. Excellent communication and stakeholder engagement skills. Training in Hazardous Area Equipment selection and installation fundamentals. Experience with global projects and working knowledge of both local and international standards (eg ATEX, CSA). Skilled in handling large datasets, particularly for energy data verification Expected Deliverables Site Assessment Reports with metering gap analysis. Recommended Meter Specifications and Connectivity Designs. Meter Layout Drawings, Maintenance and Calibration guide. Bill of Materials (BoM) for procurement with clear outline of scopes. Technical validation input for cost estimation and vendor quotations. Behavioral Competencies Integrity & Transparency: Upholding high ethical standards and communicating openly. Respect & Inclusion: Supporting colleagues and embracing diverse perspectives. Accountability: Taking ownership and delivering on commitments. Courage & Development: Seeking innovation, learning from feedback, and adapting to change. Teamwork: Collaborating effectively across functions to achieve shared goals.
If you like variety and different things in your PLC Control Systems Engineering career, then this could be a good move for you. My client designs and builds clever and unique PLC HMI and Robotic systems, and every year brings a different set of applications, customers, machinery to design and problems to solve. And getting involved in each project gives you that variety, different work, different systems, different UK sites. You re an experienced PLC programmer (any PLC would be OK, but the usual Siemens, Allen Bradley, Omron, Schneider, Mitsubishi PLC software would be ideal). You ll design the PLC software for each project from scratch, AND THEN follow the project right through to commissioning the machinery and automated systems on the customers site (UK only) and finishing with a working machine performing on site. Seeing what began on paper actually working is a great feeling! You re probably based in Leicestershire, Northamptonshire, but some engineers travel in from Hinckley, Coventry, and down the M1 from Nottingham. Salary: Yes, you ll get a good salary, and yes you ll get holiday, pension and benefits, but also something money can't buy: the chance to really engineer something interesting. If you need that in 2026, talk to me. For further information , please send a copy of your CV to Mark Burnard at Hartland Recruitment Hartland Recruitment- a technical recruitment agency specialising in finding Engineers for the UK Automation, Process Control Systems and Machinery Manufacturers since 1990. Looking for your next job in Electrical, Mechanical Design, Service Commissioning Engineering, or PLC HMI SCADA control? Send me your CV. Regrettably there is no sponsorship for a UK work permit with this vacancy.
04/12/2025
Full time
If you like variety and different things in your PLC Control Systems Engineering career, then this could be a good move for you. My client designs and builds clever and unique PLC HMI and Robotic systems, and every year brings a different set of applications, customers, machinery to design and problems to solve. And getting involved in each project gives you that variety, different work, different systems, different UK sites. You re an experienced PLC programmer (any PLC would be OK, but the usual Siemens, Allen Bradley, Omron, Schneider, Mitsubishi PLC software would be ideal). You ll design the PLC software for each project from scratch, AND THEN follow the project right through to commissioning the machinery and automated systems on the customers site (UK only) and finishing with a working machine performing on site. Seeing what began on paper actually working is a great feeling! You re probably based in Leicestershire, Northamptonshire, but some engineers travel in from Hinckley, Coventry, and down the M1 from Nottingham. Salary: Yes, you ll get a good salary, and yes you ll get holiday, pension and benefits, but also something money can't buy: the chance to really engineer something interesting. If you need that in 2026, talk to me. For further information , please send a copy of your CV to Mark Burnard at Hartland Recruitment Hartland Recruitment- a technical recruitment agency specialising in finding Engineers for the UK Automation, Process Control Systems and Machinery Manufacturers since 1990. Looking for your next job in Electrical, Mechanical Design, Service Commissioning Engineering, or PLC HMI SCADA control? Send me your CV. Regrettably there is no sponsorship for a UK work permit with this vacancy.
Project Manager - Building Management Systems Department: Smart Infrastructure Position Overview: As a BMS Project Manager, you will be responsible for the delivery of building automation projects across the UK. You will ensure projects are completed safely, on time, within budget, and to Siemens' quality standards, while complying with customer requirements, UK building regulations and health & safety requirements. Location: At Siemens we are led by our forward thinking hybrid working policy. This role will require 2-3 days visiting customer sites. The customers in the region are based around the Midlands, north of London and Manchester. Key Responsibilities: Project Planning & Delivery: Define scope, schedule, and budget for BMS projects. Ensure compliance with UK building codes, CDM regulations, and Siemens standards. Manage procurement and subcontractor engagement. Stakeholder Management: Act as the main point of contact for clients, consultants, and internal teams. Conduct regular progress meetings and provide status reports. Technical Oversight: Oversee design reviews, commissioning, and integration of Siemens BMS platforms. Ensure adherence to protocols such as BACnet, Modbus, and UK-specific standards. Financial & Risk Management: Monitor project costs and profitability. Handle change orders and mitigate risks. Documentation & Handover: Deliver accurate as-built documentation and client training. Complete project close-out and handover to service teams. Qualifications: Degree in Electrical, Mechanical, or Building Services Engineering (or equivalent field experience). Confirmed experience in project management within BMS or building automation, preferably in complex environments such as pharma. Familiarity with BMS platforms and smart building technologies. Siemens technology knowledge preferred but not essential. Skills: Strong leadership and communication skills. Proficiency in MS Project and Office Suite. Knowledge of UK building regulations and CDM compliance. Certifications: APM, or PMP preferred. CSCS card and Health & Safety training desirable. This position requires regular travel to project sites and client locations. We've got quite a lot to offer. How about you? • Hybrid Working: Achieve a healthy work-life balance with our flexible working arrangements • Pension Plan: Secure your future with our generous pension scheme, with employer contributions up to 10%. • Time Off: Recharge and rejuvenate with 26 days of annual leave (plus bank holidays), and the option to buy or sell an additional 5 days. Performance-Based Bonus: Enjoy an annual bonus linked to the company's performance. It's incredibly important that our people enjoy working here and therefore we take great pride in having a friendly, helpful, and engaging culture. We also appreciate that development and training is meaningful to many and that's why we have an encouraging environment which invests in our employee's development, whether that's Chartership, training or mentoring. We are fully committed to providing equal opportunities and building an inclusive workplace where a broad range of backgrounds and perspectives thrive. We embrace the many ways people think, learn, and experience the world-because we know that a diverse set of minds drive innovation. So that we can support you to be your best during the application and interview process, please let us know if you have any specific requirements.
04/12/2025
Full time
Project Manager - Building Management Systems Department: Smart Infrastructure Position Overview: As a BMS Project Manager, you will be responsible for the delivery of building automation projects across the UK. You will ensure projects are completed safely, on time, within budget, and to Siemens' quality standards, while complying with customer requirements, UK building regulations and health & safety requirements. Location: At Siemens we are led by our forward thinking hybrid working policy. This role will require 2-3 days visiting customer sites. The customers in the region are based around the Midlands, north of London and Manchester. Key Responsibilities: Project Planning & Delivery: Define scope, schedule, and budget for BMS projects. Ensure compliance with UK building codes, CDM regulations, and Siemens standards. Manage procurement and subcontractor engagement. Stakeholder Management: Act as the main point of contact for clients, consultants, and internal teams. Conduct regular progress meetings and provide status reports. Technical Oversight: Oversee design reviews, commissioning, and integration of Siemens BMS platforms. Ensure adherence to protocols such as BACnet, Modbus, and UK-specific standards. Financial & Risk Management: Monitor project costs and profitability. Handle change orders and mitigate risks. Documentation & Handover: Deliver accurate as-built documentation and client training. Complete project close-out and handover to service teams. Qualifications: Degree in Electrical, Mechanical, or Building Services Engineering (or equivalent field experience). Confirmed experience in project management within BMS or building automation, preferably in complex environments such as pharma. Familiarity with BMS platforms and smart building technologies. Siemens technology knowledge preferred but not essential. Skills: Strong leadership and communication skills. Proficiency in MS Project and Office Suite. Knowledge of UK building regulations and CDM compliance. Certifications: APM, or PMP preferred. CSCS card and Health & Safety training desirable. This position requires regular travel to project sites and client locations. We've got quite a lot to offer. How about you? • Hybrid Working: Achieve a healthy work-life balance with our flexible working arrangements • Pension Plan: Secure your future with our generous pension scheme, with employer contributions up to 10%. • Time Off: Recharge and rejuvenate with 26 days of annual leave (plus bank holidays), and the option to buy or sell an additional 5 days. Performance-Based Bonus: Enjoy an annual bonus linked to the company's performance. It's incredibly important that our people enjoy working here and therefore we take great pride in having a friendly, helpful, and engaging culture. We also appreciate that development and training is meaningful to many and that's why we have an encouraging environment which invests in our employee's development, whether that's Chartership, training or mentoring. We are fully committed to providing equal opportunities and building an inclusive workplace where a broad range of backgrounds and perspectives thrive. We embrace the many ways people think, learn, and experience the world-because we know that a diverse set of minds drive innovation. So that we can support you to be your best during the application and interview process, please let us know if you have any specific requirements.
Alexander Steele has partnered with a leading global food manufacturer that has an exciting opportunity for a Control & Automation specialist to join their Operational Technology (OT) team, and lead the control and automation systems infrastructure strategy for their UK factories. Your focus will be on obsolescence, security, new installations, hardware and software standards, and driving new OT solutions to deliver supply chain improvements. Key responsibilities Collaborate with cross-functional teams, including site engineering, projects, and manufacturing teams, to proactively manage the OT environment Provide Operational Technology support and project delivery across assigned factories in the UK. Liaise with maintenance technicians and project teams to support factory automation infrastructure. Document systems at respective factories and share knowledge with the wider team. Manage installations to ensure compliance with statutory regulations and group standards. Create and maintain a roadmap for systems development and technology obsolescence. Manage 3rd party contractors for project implementation and support purposes. Candidate Requirements Engineering qualification in relevant discipline such as Control & Automation, Mechatronics, Electronics, Electrical, Mechanical, Computer Science, Information Technology or equivalent. At least 5 years experience in a complex control and automation systems environment. Good technical knowledge and experience of controls and automation systems, including Siemens PLCs, WinCC SCADA, Iconics Genesis SCADA or Rockwell Logix platform. Good IT experience and technical knowledge of IP networking, Windows OS configuration, SQL Server management, OPC configuration, Active Directory, SCCM, Intune or Defender. On Offer: £55K to £60K + Car Allowance + 10% Bonus Pension + Private Healthcare 25 leave days + 8 bank holidays Homebased role (commuting 1 to 2 days a week to Liverpool based factory)
03/12/2025
Full time
Alexander Steele has partnered with a leading global food manufacturer that has an exciting opportunity for a Control & Automation specialist to join their Operational Technology (OT) team, and lead the control and automation systems infrastructure strategy for their UK factories. Your focus will be on obsolescence, security, new installations, hardware and software standards, and driving new OT solutions to deliver supply chain improvements. Key responsibilities Collaborate with cross-functional teams, including site engineering, projects, and manufacturing teams, to proactively manage the OT environment Provide Operational Technology support and project delivery across assigned factories in the UK. Liaise with maintenance technicians and project teams to support factory automation infrastructure. Document systems at respective factories and share knowledge with the wider team. Manage installations to ensure compliance with statutory regulations and group standards. Create and maintain a roadmap for systems development and technology obsolescence. Manage 3rd party contractors for project implementation and support purposes. Candidate Requirements Engineering qualification in relevant discipline such as Control & Automation, Mechatronics, Electronics, Electrical, Mechanical, Computer Science, Information Technology or equivalent. At least 5 years experience in a complex control and automation systems environment. Good technical knowledge and experience of controls and automation systems, including Siemens PLCs, WinCC SCADA, Iconics Genesis SCADA or Rockwell Logix platform. Good IT experience and technical knowledge of IP networking, Windows OS configuration, SQL Server management, OPC configuration, Active Directory, SCCM, Intune or Defender. On Offer: £55K to £60K + Car Allowance + 10% Bonus Pension + Private Healthcare 25 leave days + 8 bank holidays Homebased role (commuting 1 to 2 days a week to Liverpool based factory)
As Control Systems Engineer, you'll own the full lifecycle of automation control and safety systems - from concept through commissioning. Working alongside production, maintenance, and engineering, you'll ensure critical assets run safely, efficiently, and reliably. Client Details Our client is a specialist manufacturer with multiple sites across the UK and a strong international footprint. They operate in a niche industrial sector with continual investment in automation and process innovation. Their Lydney facility is undergoing a period of expansion, with major upgrades to safety systems, controls, and production technology - creating an exciting opportunity for a skilled engineer to make an immediate impact. Description Key Responsibilities Design, program, and commission PLC and motion control systems (Siemens TIA/Step7, Mitsubishi, Beckhoff). Develop and integrate functional safety systems (light curtains, scanners, safety PLCs, interlocks). Create and maintain documentation - FDS/URS, risk assessments, validation plans, and AutoCAD drawings. Deliver SCADA/HMI systems with data acquisition, alarm, and diagnostic capability. Lead automation projects from concept through to handover. Troubleshoot chronic faults, drive root-cause fixes, and lead system upgrades. Support production and maintenance teams with training, diagnostics, and technical guidance. Maintain governance on version control, change management, and site standards. Profile The Ideal Candidate Experienced in PLC/HMI design and commissioning (Siemens TIA/Step7; Mitsubishi GX; Beckhoff). Proven background in functional safety integration and validation (ISO 13849 / IEC 62061). Strong understanding of industrial networking, sensors, and drive systems. Confident in HMI/SCADA development (Zenon or similar) and fault diagnostics. HNC or equivalent in Electrical, Controls or Mechatronics; time-served apprenticeship preferred. Comfortable working hands-on in a production environment, collaborating with multidisciplinary teams. Excellent communicator with disciplined documentation and change control habits. Job Offer Excellent salary and benefits.
02/12/2025
Full time
As Control Systems Engineer, you'll own the full lifecycle of automation control and safety systems - from concept through commissioning. Working alongside production, maintenance, and engineering, you'll ensure critical assets run safely, efficiently, and reliably. Client Details Our client is a specialist manufacturer with multiple sites across the UK and a strong international footprint. They operate in a niche industrial sector with continual investment in automation and process innovation. Their Lydney facility is undergoing a period of expansion, with major upgrades to safety systems, controls, and production technology - creating an exciting opportunity for a skilled engineer to make an immediate impact. Description Key Responsibilities Design, program, and commission PLC and motion control systems (Siemens TIA/Step7, Mitsubishi, Beckhoff). Develop and integrate functional safety systems (light curtains, scanners, safety PLCs, interlocks). Create and maintain documentation - FDS/URS, risk assessments, validation plans, and AutoCAD drawings. Deliver SCADA/HMI systems with data acquisition, alarm, and diagnostic capability. Lead automation projects from concept through to handover. Troubleshoot chronic faults, drive root-cause fixes, and lead system upgrades. Support production and maintenance teams with training, diagnostics, and technical guidance. Maintain governance on version control, change management, and site standards. Profile The Ideal Candidate Experienced in PLC/HMI design and commissioning (Siemens TIA/Step7; Mitsubishi GX; Beckhoff). Proven background in functional safety integration and validation (ISO 13849 / IEC 62061). Strong understanding of industrial networking, sensors, and drive systems. Confident in HMI/SCADA development (Zenon or similar) and fault diagnostics. HNC or equivalent in Electrical, Controls or Mechatronics; time-served apprenticeship preferred. Comfortable working hands-on in a production environment, collaborating with multidisciplinary teams. Excellent communicator with disciplined documentation and change control habits. Job Offer Excellent salary and benefits.
We are seeking a skilled Software Engineer to join our team. This is an exciting opportunity to work on automation and control systems within the Water & Wastewater industry. You will be responsible for delivering high-quality solutions from design through to commissioning, ensuring compliance with client standards and industry best practices. The successful candidate will be working 40 hours a week. Profitec Solutions Profitec Solutions is part of Browne Group, a leading contractor in the UK water and civil engineering sectors. We play a key role in delivering the smart systems that power and protect the UK's water and utilities infrastructure. Operating from our dedicated factory in Cookstown, Northern Ireland, we design and build intelligent control and automation systems that help treatment sites operate safely, efficiently and with real-time visibility. Our in-house team delivers everything from high-quality MCC panel manufacturing to full process automation, SCADA integration and off-site electrical builds, supporting projects across the UK. Our factory-built systems reduce time on site, improve safety and ensure consistent quality. With a strong track record across the UK and Ireland, we're trusted by major water authorities to deliver reliable, future-ready control systems. We offer opportunities for people with a wide range of skills and backgrounds, from hands-on engineering to digital systems and project support. At Profitec, you'll be part of a collaborative team that values innovation, precision and continuous improvement. What We're Looking For Ability to create design documentation (FDS, system architecture, PLC I/O lists, hardware selection). Strong PLC and HMI programming skills using client standards. Experience with software testing (simulation or hardware) and commissioning. Knowledge of network setup and integration with multiple PLCs. Telemetry testing and troubleshooting capabilities. Effective client management and communication skills. Solid understanding of the Water & Wastewater industry. Demonstrable experience in software programming. Electrical qualification or equivalent experience. Proficiency in: Mitsubishi GX Works Allen Bradley Studio 5000 Logix Siemens TIA Portal / Unified HMI Wonderware SCADA systems If you're interested in joining our team, apply today and bring your expertise to Profitec Solutions Limited. The Company has experienced unprecedented growth over the past few years. We have a vast number of employees, and provide support to clients from all over the country.
02/12/2025
Full time
We are seeking a skilled Software Engineer to join our team. This is an exciting opportunity to work on automation and control systems within the Water & Wastewater industry. You will be responsible for delivering high-quality solutions from design through to commissioning, ensuring compliance with client standards and industry best practices. The successful candidate will be working 40 hours a week. Profitec Solutions Profitec Solutions is part of Browne Group, a leading contractor in the UK water and civil engineering sectors. We play a key role in delivering the smart systems that power and protect the UK's water and utilities infrastructure. Operating from our dedicated factory in Cookstown, Northern Ireland, we design and build intelligent control and automation systems that help treatment sites operate safely, efficiently and with real-time visibility. Our in-house team delivers everything from high-quality MCC panel manufacturing to full process automation, SCADA integration and off-site electrical builds, supporting projects across the UK. Our factory-built systems reduce time on site, improve safety and ensure consistent quality. With a strong track record across the UK and Ireland, we're trusted by major water authorities to deliver reliable, future-ready control systems. We offer opportunities for people with a wide range of skills and backgrounds, from hands-on engineering to digital systems and project support. At Profitec, you'll be part of a collaborative team that values innovation, precision and continuous improvement. What We're Looking For Ability to create design documentation (FDS, system architecture, PLC I/O lists, hardware selection). Strong PLC and HMI programming skills using client standards. Experience with software testing (simulation or hardware) and commissioning. Knowledge of network setup and integration with multiple PLCs. Telemetry testing and troubleshooting capabilities. Effective client management and communication skills. Solid understanding of the Water & Wastewater industry. Demonstrable experience in software programming. Electrical qualification or equivalent experience. Proficiency in: Mitsubishi GX Works Allen Bradley Studio 5000 Logix Siemens TIA Portal / Unified HMI Wonderware SCADA systems If you're interested in joining our team, apply today and bring your expertise to Profitec Solutions Limited. The Company has experienced unprecedented growth over the past few years. We have a vast number of employees, and provide support to clients from all over the country.
