Lead Hardware Engineer Luton 12-month contract Paying up to £70p/h (Inside IR35) Please note - Due to the nature of the work, you'll be required to already hold or be eligible to obtain a high level of UK Security Clearance Overview: Required to solve complex technical challenges involving high-speed digital design, FPGA-based architectures, signal processing, hardware integration and system qualification within a highly regulated defence environment. Responsibilities : Design and develop complex digital and mixed-signal hardware solutions for defence and aerospace applications. Define hardware architectures for FPGA, SoC and processor-based systems. Capture schematics and support PCB layout activities for high-speed, high-performance digital designs. Design and verify high-speed interfaces including DDR memory, PCIe, Ethernet and similar protocols. Integrate FPGA, processor, software and firmware components into complete system solutions. Perform design analysis, simulation, validation and verification activities. Support hardware bring-up, debugging and root-cause investigation at board and system level. Work closely with Systems, Firmware, Software, RF, Mechanical and Production Engineering teams. Support environmental, EMC/EMI and qualification testing in accordance with defence and aerospace standards. Produce technical documentation, design evidence and progress reporting in accordance with structured engineering lifecycles. Support customer demonstrations, integration activities, acceptance testing and trials. Experience required: Proven experience designing high-speed digital electronics within aerospace, defence or other safety/mission-critical industries. Strong background in FPGA and SoC-based hardware architectures (Xilinx, AMD, Intel/Altera or equivalent). Practical board-level debugging using oscilloscopes, logic analysers, spectrum analysers and protocol analysers. Experience integrating hardware, firmware and software on complex embedded systems. Experience developing products to demanding EMC, EMI and environmental requirements. Experience designing complex multilayer PCBs incorporating: High-speed serial interfaces; High-performance processors; DDR memory subsystems & FPGA-based signal processing solutions. Knowledge of DO-254, DEF STAN, MIL-STD or equivalent aerospace and defence standards. Experience with FPGA signal processing architecture Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
20/11/2026
Full time
Lead Hardware Engineer Luton 12-month contract Paying up to £70p/h (Inside IR35) Please note - Due to the nature of the work, you'll be required to already hold or be eligible to obtain a high level of UK Security Clearance Overview: Required to solve complex technical challenges involving high-speed digital design, FPGA-based architectures, signal processing, hardware integration and system qualification within a highly regulated defence environment. Responsibilities : Design and develop complex digital and mixed-signal hardware solutions for defence and aerospace applications. Define hardware architectures for FPGA, SoC and processor-based systems. Capture schematics and support PCB layout activities for high-speed, high-performance digital designs. Design and verify high-speed interfaces including DDR memory, PCIe, Ethernet and similar protocols. Integrate FPGA, processor, software and firmware components into complete system solutions. Perform design analysis, simulation, validation and verification activities. Support hardware bring-up, debugging and root-cause investigation at board and system level. Work closely with Systems, Firmware, Software, RF, Mechanical and Production Engineering teams. Support environmental, EMC/EMI and qualification testing in accordance with defence and aerospace standards. Produce technical documentation, design evidence and progress reporting in accordance with structured engineering lifecycles. Support customer demonstrations, integration activities, acceptance testing and trials. Experience required: Proven experience designing high-speed digital electronics within aerospace, defence or other safety/mission-critical industries. Strong background in FPGA and SoC-based hardware architectures (Xilinx, AMD, Intel/Altera or equivalent). Practical board-level debugging using oscilloscopes, logic analysers, spectrum analysers and protocol analysers. Experience integrating hardware, firmware and software on complex embedded systems. Experience developing products to demanding EMC, EMI and environmental requirements. Experience designing complex multilayer PCBs incorporating: High-speed serial interfaces; High-performance processors; DDR memory subsystems & FPGA-based signal processing solutions. Knowledge of DO-254, DEF STAN, MIL-STD or equivalent aerospace and defence standards. Experience with FPGA signal processing architecture Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Senior Systems Engineer Location: Hampshire (with occasional UK & international travel) Overview Our client is a well-established engineering organisation specialising in the design and delivery of advanced technology solutions used in highly complex and challenging environments, including offshore and subsea applications. Due to continued growth, they are looking to appoint a Senior Systems Engineer to join a specialist team delivering bespoke, high-performance systems. This role offers the opportunity to work across the full engineering lifecycle, from early concept development through to integration, validation and final delivery. You'll be joining a collaborative, multi-disciplinary engineering team, contributing to technically demanding projects with global reach. Key Responsibilities Lead the technical development and delivery of complex, custom-built systems and instrumentation. Provide technical oversight across the full project lifecycle, from concept through to delivery. Work closely with internal teams and customers to define requirements and develop effective solutions. Support bid activity, including technical proposals, planning and effort estimation. Oversee system integration, verification and validation across hardware, firmware and software elements. Ensure solutions meet customer specifications, compliance standards and commercial objectives. Coordinate work across software, electronics, mechanical and systems engineering teams. Diagnose and resolve technical issues at both subsystem and system level. Produce and maintain high-quality technical documentation, including specifications, reports and test records. Identify and manage technical risks, providing updates to stakeholders. Represent the engineering team in customer meetings, trials and technical discussions. Support ongoing operations by providing technical expertise and engineering support. About You You will be an experienced engineer with strong systems-thinking capability and the ability to operate across complex engineering programmes, ideally within offshore or subsea environments. You will ideally have experience in: Systems engineering, engineering design or complex product/project delivery. Working with customers and stakeholders in technical environments. Fault finding, root cause analysis and problem-solving. System integration and software-led systems. Mechanical and/or analogue and digital electronics engineering. Producing structured technical documentation. Managing multiple projects and competing priorities. Exposure to tools such as CAD and project/task management systems (e.g. Jira). Qualifications Degree qualified in an Engineering discipline such as: Systems Engineering Electronics Engineering Mechanical Engineering Software Engineering Communications Engineering Or a related field The Opportunity Work on technically advanced systems supporting offshore and subsea operations. Be part of a collaborative, innovative engineering environment. Contribute to complex projects with real-world global impact. Opportunity for occasional UK and international travel, including customer locations, offshore environments and specialist testing facilities. Interested? If you are interested in this opportunity or would like to find out more, please contact: Maria Vasileva Delivery Consultant - STEM Email:
20/11/2026
Full time
Senior Systems Engineer Location: Hampshire (with occasional UK & international travel) Overview Our client is a well-established engineering organisation specialising in the design and delivery of advanced technology solutions used in highly complex and challenging environments, including offshore and subsea applications. Due to continued growth, they are looking to appoint a Senior Systems Engineer to join a specialist team delivering bespoke, high-performance systems. This role offers the opportunity to work across the full engineering lifecycle, from early concept development through to integration, validation and final delivery. You'll be joining a collaborative, multi-disciplinary engineering team, contributing to technically demanding projects with global reach. Key Responsibilities Lead the technical development and delivery of complex, custom-built systems and instrumentation. Provide technical oversight across the full project lifecycle, from concept through to delivery. Work closely with internal teams and customers to define requirements and develop effective solutions. Support bid activity, including technical proposals, planning and effort estimation. Oversee system integration, verification and validation across hardware, firmware and software elements. Ensure solutions meet customer specifications, compliance standards and commercial objectives. Coordinate work across software, electronics, mechanical and systems engineering teams. Diagnose and resolve technical issues at both subsystem and system level. Produce and maintain high-quality technical documentation, including specifications, reports and test records. Identify and manage technical risks, providing updates to stakeholders. Represent the engineering team in customer meetings, trials and technical discussions. Support ongoing operations by providing technical expertise and engineering support. About You You will be an experienced engineer with strong systems-thinking capability and the ability to operate across complex engineering programmes, ideally within offshore or subsea environments. You will ideally have experience in: Systems engineering, engineering design or complex product/project delivery. Working with customers and stakeholders in technical environments. Fault finding, root cause analysis and problem-solving. System integration and software-led systems. Mechanical and/or analogue and digital electronics engineering. Producing structured technical documentation. Managing multiple projects and competing priorities. Exposure to tools such as CAD and project/task management systems (e.g. Jira). Qualifications Degree qualified in an Engineering discipline such as: Systems Engineering Electronics Engineering Mechanical Engineering Software Engineering Communications Engineering Or a related field The Opportunity Work on technically advanced systems supporting offshore and subsea operations. Be part of a collaborative, innovative engineering environment. Contribute to complex projects with real-world global impact. Opportunity for occasional UK and international travel, including customer locations, offshore environments and specialist testing facilities. Interested? If you are interested in this opportunity or would like to find out more, please contact: Maria Vasileva Delivery Consultant - STEM Email:
Senior Embedded Software Engineer Hybrid Southampton (2 days per week WFH) Up to £75,000 A globally leading client has an opportunity for an experienced Embedded Software Engineer to join an innovative engineering team developing cutting-edge embedded software for high-reliability systems. This is a hybrid working position with three days per week required onsite at the Southampton based innovation center. What makes this position unique is because the client have soo much work across the embedded stack (from low level C code to multi-threaded higher level OS based C++), they can tailor the work and position to you! Salary: Up to £75,000 (with industry leading benefits - 7% pension, Bupa, Shares, 1 day holiday increase per year) You'll be working on: Developing and maintaining embedded software in C/C++ Designing, testing, and integrating software for complex embedded systems Working across the full software development lifecycle Collaborating with hardware, FPGA, and systems engineering teams Building robust, high-performance software for advanced engineering applications We're looking for engineers with experience in: Embedded Software Development C++ and Linux environments Object-Oriented Design (OOD), SOLID principles, and design patterns Unit testing and modern software development practices Communication protocols such as CAN, RS232/RS422, UDP, TCP/IP OR equivalent Due to security access you must have been in the U.K. for at least five years Desirable experience includes: MATLAB/Simulink OpenGL or Vulkan CUDA or OpenCL FPGA or HDL exposure Video processing or machine learning Experience within defence, aerospace, automotive, or other high-reliability industries If you're looking for an opportunity to work on technically challenging projects with the flexibility of remote working, I'd love to hear from you. Please apply with an up to date CV. Send me a message or email your CV to discuss the opportunity in more detail.
20/11/2026
Full time
Senior Embedded Software Engineer Hybrid Southampton (2 days per week WFH) Up to £75,000 A globally leading client has an opportunity for an experienced Embedded Software Engineer to join an innovative engineering team developing cutting-edge embedded software for high-reliability systems. This is a hybrid working position with three days per week required onsite at the Southampton based innovation center. What makes this position unique is because the client have soo much work across the embedded stack (from low level C code to multi-threaded higher level OS based C++), they can tailor the work and position to you! Salary: Up to £75,000 (with industry leading benefits - 7% pension, Bupa, Shares, 1 day holiday increase per year) You'll be working on: Developing and maintaining embedded software in C/C++ Designing, testing, and integrating software for complex embedded systems Working across the full software development lifecycle Collaborating with hardware, FPGA, and systems engineering teams Building robust, high-performance software for advanced engineering applications We're looking for engineers with experience in: Embedded Software Development C++ and Linux environments Object-Oriented Design (OOD), SOLID principles, and design patterns Unit testing and modern software development practices Communication protocols such as CAN, RS232/RS422, UDP, TCP/IP OR equivalent Due to security access you must have been in the U.K. for at least five years Desirable experience includes: MATLAB/Simulink OpenGL or Vulkan CUDA or OpenCL FPGA or HDL exposure Video processing or machine learning Experience within defence, aerospace, automotive, or other high-reliability industries If you're looking for an opportunity to work on technically challenging projects with the flexibility of remote working, I'd love to hear from you. Please apply with an up to date CV. Send me a message or email your CV to discuss the opportunity in more detail.
Senior Electronics Design Engineer Location: UK-wide opportunity Contract: Permanent, Full-Time Working Arrangement: Site-based, with occasional travel Visa Sponsorship: Available for the right candidate The Opportunity An exciting opportunity has arisen for a Senior Electronics Design Engineer to join a specialist engineering organisation developing advanced electronic systems for demanding subsea and marine environments. The organisation designs and develops sophisticated underwater technologies, with applications across marine science, offshore energy and other technically challenging industries. This is a hands-on engineering position offering involvement across analogue, digital and mixed-signal hardware design, embedded systems and programmable devices . You will contribute to the development, testing, verification and improvement of reliable electronic equipment, supporting products throughout their lifecycle from initial design through to manufacture and ongoing service. The role would suit an experienced electronics engineer who enjoys tackling complex technical challenges, evaluating design solutions and taking ownership of engineering projects. You will work closely with engineering and production teams, contribute to technical reviews and provide guidance to colleagues. While the position carries technical responsibility, it does not involve formal line management. Key Responsibilities Electronics Design: Design and develop analogue, digital and mixed-signal electronics for subsea and marine equipment, including low-power and low-noise circuits. Embedded & Programmable Systems: Work with FPGA and microprocessor-based systems, embedded software and hardware/firmware interfaces. Technical Leadership: Contribute to design reviews, evaluate technical options and influence robust engineering decisions. Testing & Fault-Finding: Carry out practical laboratory testing, debugging and fault-finding across electronic hardware and embedded systems. Verification & Compliance: Support EMC testing and verification activities, ensuring designs meet required performance and reliability standards. Production Support: Maintain accurate technical documentation, assist with manufacturing issues and contribute to ongoing product improvements. Candidate Profile & Requirements Essential Strong experience in analogue and digital electronics design, circuit development and practical hardware engineering. Experience working with FPGA and microprocessor-based systems. Knowledge of embedded C programming, or the ability to diagnose and investigate embedded software and hardware issues. Understanding of low-power and low-noise design principles. Knowledge of EMC-aware design practices and testing. Experience using schematic capture and PCB layout tools, ideally Altium Designer. A relevant engineering degree or equivalent practical electronics design experience. Desirable Experience with embedded C and/or C++ and microprocessor software development. Background in subsea or marine electronics, instrumentation, defence, aerospace or other complex electronic systems. Experience taking electronic designs through verification, manufacture, production support or technology transfer. Experience mentoring engineers, conducting design reviews or sharing specialist technical knowledge. What's on Offer? A permanent opportunity within a specialist engineering environment. Varied, hands-on engineering work across hardware design, embedded systems and programmable logic. The opportunity to influence technical decisions and contribute to complex product development. Exposure to sophisticated electronic systems used in demanding subsea and marine applications. A technically challenging position offering ownership, collaboration and opportunities to develop specialist expertise. Visa sponsorship available for the right candidate. Interested? For further information or to apply, contact Chrissie Rehman at DCS Recruitment. Email:
20/11/2026
Full time
Senior Electronics Design Engineer Location: UK-wide opportunity Contract: Permanent, Full-Time Working Arrangement: Site-based, with occasional travel Visa Sponsorship: Available for the right candidate The Opportunity An exciting opportunity has arisen for a Senior Electronics Design Engineer to join a specialist engineering organisation developing advanced electronic systems for demanding subsea and marine environments. The organisation designs and develops sophisticated underwater technologies, with applications across marine science, offshore energy and other technically challenging industries. This is a hands-on engineering position offering involvement across analogue, digital and mixed-signal hardware design, embedded systems and programmable devices . You will contribute to the development, testing, verification and improvement of reliable electronic equipment, supporting products throughout their lifecycle from initial design through to manufacture and ongoing service. The role would suit an experienced electronics engineer who enjoys tackling complex technical challenges, evaluating design solutions and taking ownership of engineering projects. You will work closely with engineering and production teams, contribute to technical reviews and provide guidance to colleagues. While the position carries technical responsibility, it does not involve formal line management. Key Responsibilities Electronics Design: Design and develop analogue, digital and mixed-signal electronics for subsea and marine equipment, including low-power and low-noise circuits. Embedded & Programmable Systems: Work with FPGA and microprocessor-based systems, embedded software and hardware/firmware interfaces. Technical Leadership: Contribute to design reviews, evaluate technical options and influence robust engineering decisions. Testing & Fault-Finding: Carry out practical laboratory testing, debugging and fault-finding across electronic hardware and embedded systems. Verification & Compliance: Support EMC testing and verification activities, ensuring designs meet required performance and reliability standards. Production Support: Maintain accurate technical documentation, assist with manufacturing issues and contribute to ongoing product improvements. Candidate Profile & Requirements Essential Strong experience in analogue and digital electronics design, circuit development and practical hardware engineering. Experience working with FPGA and microprocessor-based systems. Knowledge of embedded C programming, or the ability to diagnose and investigate embedded software and hardware issues. Understanding of low-power and low-noise design principles. Knowledge of EMC-aware design practices and testing. Experience using schematic capture and PCB layout tools, ideally Altium Designer. A relevant engineering degree or equivalent practical electronics design experience. Desirable Experience with embedded C and/or C++ and microprocessor software development. Background in subsea or marine electronics, instrumentation, defence, aerospace or other complex electronic systems. Experience taking electronic designs through verification, manufacture, production support or technology transfer. Experience mentoring engineers, conducting design reviews or sharing specialist technical knowledge. What's on Offer? A permanent opportunity within a specialist engineering environment. Varied, hands-on engineering work across hardware design, embedded systems and programmable logic. The opportunity to influence technical decisions and contribute to complex product development. Exposure to sophisticated electronic systems used in demanding subsea and marine applications. A technically challenging position offering ownership, collaboration and opportunities to develop specialist expertise. Visa sponsorship available for the right candidate. Interested? For further information or to apply, contact Chrissie Rehman at DCS Recruitment. Email:
Key Responsibilities 1. Legacy Systems Administration • Manage and maintain Legacy LumiraDx IT infrastructure, servers, applications, and supporting services. • Ensure the availability, performance, and stability of Legacy systems. • Perform routine system administration, maintenance, patching, and upgrades where supported. • Monitor system health, capacity, availability, and performance. • Maintain system configurations, technical documentation, and operational procedures. • Identify Legacy technology risks and recommend appropriate mitigation strategies. 2. Infrastructure and Server Management • Administer Windows and Linux server environments. • Manage Active Directory, Group Policy, DNS, DHCP, and authentication services where applicable. • Monitor server resources, storage, CPU, memory, and network connectivity. • Manage virtualised infrastructure and associated workloads. • Support backup, recovery, and disaster recovery processes. • Ensure appropriate access controls and privileged account management. 3. Incident and Problem Management • Take ownership of complex infrastructure and application-related incidents. • Troubleshoot and resolve critical issues affecting Legacy LumiraDx systems. • Perform root cause analysis and implement preventative measures. • Manage incidents, service requests, and changes in line with ITIL practices. • Coordinate with third-party vendors and application support teams to resolve technical issues. 4. Security and Compliance • Ensure Legacy systems comply with organisational security policies and regulatory requirements. • Review system access, user permissions, and privileged accounts. • Monitor vulnerabilities and security risks associated with unsupported or end-of-life technologies. • Coordinate security patching and remediation activities. • Maintain audit evidence, system records, and compliance documentation. • Ensure sensitive business and operational data is protected. 5. Backup and Disaster Recovery • Monitor and maintain backup processes for Legacy systems. • Regularly validate backup integrity and recovery procedures. • Support disaster recovery planning and testing. • Ensure critical systems have documented recovery procedures. • Minimise business disruption through effective continuity planning. 6. Vendor and Stakeholder Management • Work with third-party suppliers and vendors supporting Legacy LumiraDx technologies. • Coordinate technical support, maintenance agreements, and escalations. • Collaborate with infrastructure, cybersecurity, application, and service delivery teams. • Provide technical updates and risk assessments to management. • Support knowledge transfer and ensure critical system knowledge is retained. 7. Legacy Technology Risk and Lifecycle Management • Maintain an inventory of Legacy servers, applications, databases, and infrastructure components. • Identify unsupported operating systems, applications, and hardware. • Assess operational, security, and business continuity risks. • Develop recommendations for system stabilisation, migration, replacement, or decommissioning. • Ensure Legacy systems remain operational until formally retired or transitioned. Essential Skills and Experience • Significant experience as a Senior Systems Administrator or Infrastructure Engineer. • Strong experience managing Legacy enterprise IT environments. • Excellent knowledge of Windows Server and Linux administration. • Experience with Active Directory, DNS, DHCP, Group Policy, and enterprise authentication. • Experience with VMware or other virtualisation technologies. • Knowledge of backup, disaster recovery, and business continuity. • Strong troubleshooting and root cause analysis skills. • Experience with ITIL incident, problem, and change management. • Understanding of cybersecurity, vulnerability management, and infrastructure compliance. • Experience managing third-party suppliers and technical support teams. Desirable Skills • Experience supporting healthcare, medical technology, or regulated IT environments. • Familiarity with medical technology infrastructure and business-critical applications. • Experience managing end-of-life and unsupported technologies. • Knowledge of database administration and application dependencies. • Experience with infrastructure migration and decommissioning projects. • Understanding of ISO 27001 and relevant healthcare security requirements. Key Competencies • Strong technical leadership and ownership. • Analytical and problem-solving capabilities. • Excellent communication and stakeholder management. • Ability to work independently and manage competing priorities. • Risk-based decision-making. • Attention to detail and strong documentation practices.
20/11/2026
Contractor
Key Responsibilities 1. Legacy Systems Administration • Manage and maintain Legacy LumiraDx IT infrastructure, servers, applications, and supporting services. • Ensure the availability, performance, and stability of Legacy systems. • Perform routine system administration, maintenance, patching, and upgrades where supported. • Monitor system health, capacity, availability, and performance. • Maintain system configurations, technical documentation, and operational procedures. • Identify Legacy technology risks and recommend appropriate mitigation strategies. 2. Infrastructure and Server Management • Administer Windows and Linux server environments. • Manage Active Directory, Group Policy, DNS, DHCP, and authentication services where applicable. • Monitor server resources, storage, CPU, memory, and network connectivity. • Manage virtualised infrastructure and associated workloads. • Support backup, recovery, and disaster recovery processes. • Ensure appropriate access controls and privileged account management. 3. Incident and Problem Management • Take ownership of complex infrastructure and application-related incidents. • Troubleshoot and resolve critical issues affecting Legacy LumiraDx systems. • Perform root cause analysis and implement preventative measures. • Manage incidents, service requests, and changes in line with ITIL practices. • Coordinate with third-party vendors and application support teams to resolve technical issues. 4. Security and Compliance • Ensure Legacy systems comply with organisational security policies and regulatory requirements. • Review system access, user permissions, and privileged accounts. • Monitor vulnerabilities and security risks associated with unsupported or end-of-life technologies. • Coordinate security patching and remediation activities. • Maintain audit evidence, system records, and compliance documentation. • Ensure sensitive business and operational data is protected. 5. Backup and Disaster Recovery • Monitor and maintain backup processes for Legacy systems. • Regularly validate backup integrity and recovery procedures. • Support disaster recovery planning and testing. • Ensure critical systems have documented recovery procedures. • Minimise business disruption through effective continuity planning. 6. Vendor and Stakeholder Management • Work with third-party suppliers and vendors supporting Legacy LumiraDx technologies. • Coordinate technical support, maintenance agreements, and escalations. • Collaborate with infrastructure, cybersecurity, application, and service delivery teams. • Provide technical updates and risk assessments to management. • Support knowledge transfer and ensure critical system knowledge is retained. 7. Legacy Technology Risk and Lifecycle Management • Maintain an inventory of Legacy servers, applications, databases, and infrastructure components. • Identify unsupported operating systems, applications, and hardware. • Assess operational, security, and business continuity risks. • Develop recommendations for system stabilisation, migration, replacement, or decommissioning. • Ensure Legacy systems remain operational until formally retired or transitioned. Essential Skills and Experience • Significant experience as a Senior Systems Administrator or Infrastructure Engineer. • Strong experience managing Legacy enterprise IT environments. • Excellent knowledge of Windows Server and Linux administration. • Experience with Active Directory, DNS, DHCP, Group Policy, and enterprise authentication. • Experience with VMware or other virtualisation technologies. • Knowledge of backup, disaster recovery, and business continuity. • Strong troubleshooting and root cause analysis skills. • Experience with ITIL incident, problem, and change management. • Understanding of cybersecurity, vulnerability management, and infrastructure compliance. • Experience managing third-party suppliers and technical support teams. Desirable Skills • Experience supporting healthcare, medical technology, or regulated IT environments. • Familiarity with medical technology infrastructure and business-critical applications. • Experience managing end-of-life and unsupported technologies. • Knowledge of database administration and application dependencies. • Experience with infrastructure migration and decommissioning projects. • Understanding of ISO 27001 and relevant healthcare security requirements. Key Competencies • Strong technical leadership and ownership. • Analytical and problem-solving capabilities. • Excellent communication and stakeholder management. • Ability to work independently and manage competing priorities. • Risk-based decision-making. • Attention to detail and strong documentation practices.
Audio Visual & Unified Communications Support Engineer Central London (5 days on site) £180 per day - inside IR35 On behalf of a global leading consultancy, I have an urgent requirement an experienced Audio Visual & Unified Communications Support Engineer to join the business on an initial 6-month contract. Due to the urgency of this role, you must be able to start immediately. The Audio Visual-Unified Communications Support Engineer will deploy and support their Audio Visual and Unified Communications global estate. The candidate will work with their managed services to lead implementations of technically appropriate AV/VC/UC & Telephony products (Ring Central). Due to the in-person nature of the role, applicants must be willing to work 5 days on site at their Central London (West End) offices, therefore you must be within commutable distance of this location. PLEASE NOTE: Visa sponsorship is not available for this role, therefore you must have full working rights without restriction to work in the UK. Responsibilities: Manage enterprise network audio-video-related projects. Troubleshoot video issues on network and report progress on various projects and installations. Drive the adoption of video conferencing service usage via Zoom, Teams and/or Webex. Follow, review, and recommend process changes and standards for design and documentation where necessary. Plan and coordinate the expansion of video and voice network technology. Perform Unified Communications software and hardware upgrades, including the installation of video conferencing and A/V equipment Interface with Projects and Infrastructure teams, site walkthroughs, design, ordering equipment, receiving and installing equipment, and provide support model for equipment (end- to-end management). Provide project status on a regular basis as project team requires. Collaborate with Operations and Production departments in support of Events, Sales, exhibitions and special projects related to build outs, renovations, adds, moves and changes. Executive Level Support (C Level, VP, Directors) for unified communication matters Provide local and remote collaboration support; work with remote Desktop support to resolve issues, work with remote users (internal and external) to successfully connect with existing video conferencing equipment and communicate services between and across different groups and levels internal and external to the organization. End user support for all Unified Communications (collaborative applications and video), ability to perform troubleshooting on integrations and support A/V designs in existing and future video- conference rooms and offices. Skills & experience required: Strong experience in audio-visual implementations and/or videoconference network engineering with Cisco Telepresence infrastructure. Experience with Cisco endpoints and infrastructure (Control Hub) UC infrastructure (Ring Central) Experience with Webex administration and other web/audio collaboration platforms and services, specifically Microsoft Teams and Zoom. Strong infrastructure implementation and project deployment experience Experience in supporting system migrations and experience with AMX and/or Crestron AV Control systems. Working knowledge of A/V concepts around audio and video signal types, routing, and cabling, including Production devices ie Ross,Blackbox, Dante, Matrox. Proven analytical, evaluative, and problem-solving abilities with keen attention to detail. Proven ability to drive successful results across multiple functional areas Extensive experience working in a team-oriented, collaborative environment globally Well versed in Desktop technologies (Windows 10, Macintosh and Office 365) Collaboration technologies (WebEx, Teams, SharePoint, One Drive), Server Technologies and Network Technologies.
20/11/2026
Contractor
Audio Visual & Unified Communications Support Engineer Central London (5 days on site) £180 per day - inside IR35 On behalf of a global leading consultancy, I have an urgent requirement an experienced Audio Visual & Unified Communications Support Engineer to join the business on an initial 6-month contract. Due to the urgency of this role, you must be able to start immediately. The Audio Visual-Unified Communications Support Engineer will deploy and support their Audio Visual and Unified Communications global estate. The candidate will work with their managed services to lead implementations of technically appropriate AV/VC/UC & Telephony products (Ring Central). Due to the in-person nature of the role, applicants must be willing to work 5 days on site at their Central London (West End) offices, therefore you must be within commutable distance of this location. PLEASE NOTE: Visa sponsorship is not available for this role, therefore you must have full working rights without restriction to work in the UK. Responsibilities: Manage enterprise network audio-video-related projects. Troubleshoot video issues on network and report progress on various projects and installations. Drive the adoption of video conferencing service usage via Zoom, Teams and/or Webex. Follow, review, and recommend process changes and standards for design and documentation where necessary. Plan and coordinate the expansion of video and voice network technology. Perform Unified Communications software and hardware upgrades, including the installation of video conferencing and A/V equipment Interface with Projects and Infrastructure teams, site walkthroughs, design, ordering equipment, receiving and installing equipment, and provide support model for equipment (end- to-end management). Provide project status on a regular basis as project team requires. Collaborate with Operations and Production departments in support of Events, Sales, exhibitions and special projects related to build outs, renovations, adds, moves and changes. Executive Level Support (C Level, VP, Directors) for unified communication matters Provide local and remote collaboration support; work with remote Desktop support to resolve issues, work with remote users (internal and external) to successfully connect with existing video conferencing equipment and communicate services between and across different groups and levels internal and external to the organization. End user support for all Unified Communications (collaborative applications and video), ability to perform troubleshooting on integrations and support A/V designs in existing and future video- conference rooms and offices. Skills & experience required: Strong experience in audio-visual implementations and/or videoconference network engineering with Cisco Telepresence infrastructure. Experience with Cisco endpoints and infrastructure (Control Hub) UC infrastructure (Ring Central) Experience with Webex administration and other web/audio collaboration platforms and services, specifically Microsoft Teams and Zoom. Strong infrastructure implementation and project deployment experience Experience in supporting system migrations and experience with AMX and/or Crestron AV Control systems. Working knowledge of A/V concepts around audio and video signal types, routing, and cabling, including Production devices ie Ross,Blackbox, Dante, Matrox. Proven analytical, evaluative, and problem-solving abilities with keen attention to detail. Proven ability to drive successful results across multiple functional areas Extensive experience working in a team-oriented, collaborative environment globally Well versed in Desktop technologies (Windows 10, Macintosh and Office 365) Collaboration technologies (WebEx, Teams, SharePoint, One Drive), Server Technologies and Network Technologies.
Date Posted: 2026-11-06 Country: United Kingdom Location: Plymouth, Plymouth Position Role Type: Hybrid Collins Aerospace, a Raytheon Technologies company, is a world leader in advanced and intelligent solutions for the global aerospace and defence industries. With a comprehensive inertial sensing and integrated navigation technology portfolio and deep domain expertise, we deliver cutting-edge systems that solve our customers' toughest stabilisation, flight control and navigation challenges and help shape the future of aviation and defence. This is a hybrid role based at our Plymouth site, where we design and manufacture control, navigation, and guidance systems for both air and surface applications. Our world-class products include MEMS-based Inertial Measurement Units (IMUs) and the TERPROM Digital Terrain Reference Navigation System. Our growth plan includes development and extension of our current technologies into state of the art military and civil aircraft applications and we're looking for exceptional engineers to join us on that journey. As a Senior Systems Engineer, you'll play a key role in developing, integrating and validating complex embedded systems. Working across hardware, software and mechanical domains, you'll take technical ownership of defined systems or subsystems, influencing engineering decisions and supporting delivery from concept through to validation. What You Will Do Your day-to-day will include: Working with our customers and key stakeholders to lead the capture, analysis and definition of system-level use cases, concepts of operations and requirements for assigned systems or subsystems. Development of system architecture, taking technical ownership of architectural design decisions, requirements decomposition and associated technical trade-offs. Interfacing with stakeholders across Systems, Software, Electrical and Mechanical Engineering, driving the development and alignment of requirement specifications for each component of the system. Leading defined system integration activities for real-time embedded systems, including hardware/software interfaces, and resolving complex integration challenges. Ensuring requirement-to-requirement and requirements-to-test traceability throughout the design, identifying and resolving gaps, inconsistencies and technical risks. Developing test cases and procedures against requirements and executing tests, while contributing to verification strategies, reviewing results and resolving complex technical issues. Applying logical and innovative problem-solving across software, hardware and system levels, providing technical direction and recommendations on complex engineering challenges. Providing inputs to project planning, estimations and progress reporting, including ownership of technical estimates, risks and deliverables for assigned engineering work packages. Providing technical guidance to less experienced engineers and contributing to technical and design reviews. What You Will Learn At Collins Aerospace, your career development is as important as our technical innovation. You'll benefit from: Exposure to cutting-edge navigation and sensing technologies. Mentorship and training from industry-leading experts. Opportunities to work on mission-critical systems used globally. A supportive environment that encourages continuous learning and career progression. Qualifications & Experience Degree qualification in Software Engineering, Computer Science, Electronics, Aerospace Engineering or a related discipline, or equivalent industry experience. Excellent written and verbal communication skills with technical and non-technical stakeholders in a fast-paced environment. Demonstrated experience as a Systems Engineer, covering the full development lifecycle, including independently delivering complex systems engineering activities. Strong requirements analysis and management skills, including requirements decomposition and traceability. Experience of architectural design and decomposition, including evaluating technical trade-offs and contributing to system-level design decisions. Experience of creating test plans, test cases and procedures and executing test programmes. Experience with requirements management tools such as DOORS (or Jama or similar). Familiarity with version control systems (SVN, Git, Teamwork Cloud). Experience taking technical ownership of engineering deliverables and collaborating across multidisciplinary teams. Skills & Experience We Value Experience with SysML tools such as Enterprise Architect (or Cameo) is preferred. Ability to read and interpret schematics. Data analysis. Experience of Control Systems Engineering. Experience of Digital Signal Processing. Experience with platforms that utilise inertial sensors and associated requirements. Experience using COTS test equipment in a lab environment (oscilloscopes, bus analysers, etc.). Experience with hardware-in-the-loop testing. MATLAB. What We Offer: Competitive salary and comprehensive benefits package. Flexible working arrangements. Excellent 2:1 matched pension contribution (up to 10%). Private healthcare and life assurance. 25 days annual leave plus the option to buy or sell up to 5 days. Early finish Fridays and a culture that values work life balance. Ongoing career development, mentorship, and world class training. Learn More & Apply Now! Do you want to be a part of something bigger? A team whose impact stretches across the world, and even beyond? At Collins Aerospace, our Mission Systems team helps civilian, military and government customers complete their most complex missions - whatever and wherever they may be. Our customers depend on us for intelligent and secure communications, missionised systems for specialised aircraft and spacecraft and collaborative space solutions. By joining our team, you'll have your own critical part to play in ensuring our customers succeed today while anticipating their needs for tomorrow. Are you up for the challenge? Join our mission today. Hybrid: Employees who are working in Hybrid roles will work regularly both onsite and offsite. Ratio of time working onsite will be determined in partnership with your leader. Note: The successful candidate must hold an active or be willing and eligible to obtain SC level security clearance. Please note that access to certain projects may be restricted based on nationality. RTX adheres to the principles of equal employment. All qualified applications will be given careful consideration without regard to ethnicity, color, religion, gender, sexual orientation or identity, national origin, age, disability, protected veteran status or any other characteristic protected by law. Privacy Policy and Terms: Click on this link to read the Policy and Terms
20/11/2026
Full time
Date Posted: 2026-11-06 Country: United Kingdom Location: Plymouth, Plymouth Position Role Type: Hybrid Collins Aerospace, a Raytheon Technologies company, is a world leader in advanced and intelligent solutions for the global aerospace and defence industries. With a comprehensive inertial sensing and integrated navigation technology portfolio and deep domain expertise, we deliver cutting-edge systems that solve our customers' toughest stabilisation, flight control and navigation challenges and help shape the future of aviation and defence. This is a hybrid role based at our Plymouth site, where we design and manufacture control, navigation, and guidance systems for both air and surface applications. Our world-class products include MEMS-based Inertial Measurement Units (IMUs) and the TERPROM Digital Terrain Reference Navigation System. Our growth plan includes development and extension of our current technologies into state of the art military and civil aircraft applications and we're looking for exceptional engineers to join us on that journey. As a Senior Systems Engineer, you'll play a key role in developing, integrating and validating complex embedded systems. Working across hardware, software and mechanical domains, you'll take technical ownership of defined systems or subsystems, influencing engineering decisions and supporting delivery from concept through to validation. What You Will Do Your day-to-day will include: Working with our customers and key stakeholders to lead the capture, analysis and definition of system-level use cases, concepts of operations and requirements for assigned systems or subsystems. Development of system architecture, taking technical ownership of architectural design decisions, requirements decomposition and associated technical trade-offs. Interfacing with stakeholders across Systems, Software, Electrical and Mechanical Engineering, driving the development and alignment of requirement specifications for each component of the system. Leading defined system integration activities for real-time embedded systems, including hardware/software interfaces, and resolving complex integration challenges. Ensuring requirement-to-requirement and requirements-to-test traceability throughout the design, identifying and resolving gaps, inconsistencies and technical risks. Developing test cases and procedures against requirements and executing tests, while contributing to verification strategies, reviewing results and resolving complex technical issues. Applying logical and innovative problem-solving across software, hardware and system levels, providing technical direction and recommendations on complex engineering challenges. Providing inputs to project planning, estimations and progress reporting, including ownership of technical estimates, risks and deliverables for assigned engineering work packages. Providing technical guidance to less experienced engineers and contributing to technical and design reviews. What You Will Learn At Collins Aerospace, your career development is as important as our technical innovation. You'll benefit from: Exposure to cutting-edge navigation and sensing technologies. Mentorship and training from industry-leading experts. Opportunities to work on mission-critical systems used globally. A supportive environment that encourages continuous learning and career progression. Qualifications & Experience Degree qualification in Software Engineering, Computer Science, Electronics, Aerospace Engineering or a related discipline, or equivalent industry experience. Excellent written and verbal communication skills with technical and non-technical stakeholders in a fast-paced environment. Demonstrated experience as a Systems Engineer, covering the full development lifecycle, including independently delivering complex systems engineering activities. Strong requirements analysis and management skills, including requirements decomposition and traceability. Experience of architectural design and decomposition, including evaluating technical trade-offs and contributing to system-level design decisions. Experience of creating test plans, test cases and procedures and executing test programmes. Experience with requirements management tools such as DOORS (or Jama or similar). Familiarity with version control systems (SVN, Git, Teamwork Cloud). Experience taking technical ownership of engineering deliverables and collaborating across multidisciplinary teams. Skills & Experience We Value Experience with SysML tools such as Enterprise Architect (or Cameo) is preferred. Ability to read and interpret schematics. Data analysis. Experience of Control Systems Engineering. Experience of Digital Signal Processing. Experience with platforms that utilise inertial sensors and associated requirements. Experience using COTS test equipment in a lab environment (oscilloscopes, bus analysers, etc.). Experience with hardware-in-the-loop testing. MATLAB. What We Offer: Competitive salary and comprehensive benefits package. Flexible working arrangements. Excellent 2:1 matched pension contribution (up to 10%). Private healthcare and life assurance. 25 days annual leave plus the option to buy or sell up to 5 days. Early finish Fridays and a culture that values work life balance. Ongoing career development, mentorship, and world class training. Learn More & Apply Now! Do you want to be a part of something bigger? A team whose impact stretches across the world, and even beyond? At Collins Aerospace, our Mission Systems team helps civilian, military and government customers complete their most complex missions - whatever and wherever they may be. Our customers depend on us for intelligent and secure communications, missionised systems for specialised aircraft and spacecraft and collaborative space solutions. By joining our team, you'll have your own critical part to play in ensuring our customers succeed today while anticipating their needs for tomorrow. Are you up for the challenge? Join our mission today. Hybrid: Employees who are working in Hybrid roles will work regularly both onsite and offsite. Ratio of time working onsite will be determined in partnership with your leader. Note: The successful candidate must hold an active or be willing and eligible to obtain SC level security clearance. Please note that access to certain projects may be restricted based on nationality. RTX adheres to the principles of equal employment. All qualified applications will be given careful consideration without regard to ethnicity, color, religion, gender, sexual orientation or identity, national origin, age, disability, protected veteran status or any other characteristic protected by law. Privacy Policy and Terms: Click on this link to read the Policy and Terms
Date Posted: 2026-11-06 Country: United Kingdom Location: Plymouth, Plymouth Position Role Type: Hybrid Collins Aerospace, a Raytheon Technologies company, is a world leader in advanced and intelligent solutions for the global aerospace and defence industries. With a comprehensive inertial sensing and integrated navigation technology portfolio and deep domain expertise, we deliver cutting-edge systems that solve our customers' toughest stabilisation, flight control and navigation challenges and help shape the future of aviation and defence. This is a hybrid role based at our Plymouth site, where we design and manufacture control, navigation, and guidance systems for both air and surface applications. Our world-class products include MEMS-based Inertial Measurement Units (IMUs) and the TERPROM Digital Terrain Reference Navigation System. Our growth plan includes development and extension of our current technologies into state of the art military and civil aircraft applications and we're looking for exceptional engineers to join us on that journey. As a Senior Systems Engineer, you'll play a key role in developing, integrating and validating complex embedded systems. Working across hardware, software and mechanical domains, you'll take technical ownership of defined systems or subsystems, influencing engineering decisions and supporting delivery from concept through to validation. What You Will Do Your day-to-day will include: Working with our customers and key stakeholders to lead the capture, analysis and definition of system-level use cases, concepts of operations and requirements for assigned systems or subsystems. Development of system architecture, taking technical ownership of architectural design decisions, requirements decomposition and associated technical trade-offs. Interfacing with stakeholders across Systems, Software, Electrical and Mechanical Engineering, driving the development and alignment of requirement specifications for each component of the system. Leading defined system integration activities for real-time embedded systems, including hardware/software interfaces, and resolving complex integration challenges. Ensuring requirement-to-requirement and requirements-to-test traceability throughout the design, identifying and resolving gaps, inconsistencies and technical risks. Developing test cases and procedures against requirements and executing tests, while contributing to verification strategies, reviewing results and resolving complex technical issues. Applying logical and innovative problem-solving across software, hardware and system levels, providing technical direction and recommendations on complex engineering challenges. Providing inputs to project planning, estimations and progress reporting, including ownership of technical estimates, risks and deliverables for assigned engineering work packages. Providing technical guidance to less experienced engineers and contributing to technical and design reviews. What You Will Learn At Collins Aerospace, your career development is as important as our technical innovation. You'll benefit from: Exposure to cutting-edge navigation and sensing technologies. Mentorship and training from industry-leading experts. Opportunities to work on mission-critical systems used globally. A supportive environment that encourages continuous learning and career progression. Qualifications & Experience Degree qualification in Software Engineering, Computer Science, Electronics, Aerospace Engineering or a related discipline, or equivalent industry experience. Excellent written and verbal communication skills with technical and non-technical stakeholders in a fast-paced environment. Demonstrated experience as a Systems Engineer, covering the full development lifecycle, including independently delivering complex systems engineering activities. Strong requirements analysis and management skills, including requirements decomposition and traceability. Experience of architectural design and decomposition, including evaluating technical trade-offs and contributing to system-level design decisions. Experience of creating test plans, test cases and procedures and executing test programmes. Experience with requirements management tools such as DOORS (or Jama or similar). Familiarity with version control systems (SVN, Git, Teamwork Cloud). Experience taking technical ownership of engineering deliverables and collaborating across multidisciplinary teams. Skills & Experience We Value Experience with SysML tools such as Enterprise Architect (or Cameo) is preferred. Ability to read and interpret schematics. Data analysis. Experience of Control Systems Engineering. Experience of Digital Signal Processing. Experience with platforms that utilise inertial sensors and associated requirements. Experience using COTS test equipment in a lab environment (oscilloscopes, bus analysers, etc.). Experience with hardware-in-the-loop testing. MATLAB. What We Offer: Competitive salary and comprehensive benefits package. Flexible working arrangements. Excellent 2:1 matched pension contribution (up to 10%). Private healthcare and life assurance. 25 days annual leave plus the option to buy or sell up to 5 days. Early finish Fridays and a culture that values work life balance. Ongoing career development, mentorship, and world class training. Learn More & Apply Now! Do you want to be a part of something bigger? A team whose impact stretches across the world, and even beyond? At Collins Aerospace, our Mission Systems team helps civilian, military and government customers complete their most complex missions - whatever and wherever they may be. Our customers depend on us for intelligent and secure communications, missionised systems for specialised aircraft and spacecraft and collaborative space solutions. By joining our team, you'll have your own critical part to play in ensuring our customers succeed today while anticipating their needs for tomorrow. Are you up for the challenge? Join our mission today. Hybrid: Employees who are working in Hybrid roles will work regularly both onsite and offsite. Ratio of time working onsite will be determined in partnership with your leader. Note: The successful candidate must hold an active or be willing and eligible to obtain SC level security clearance. Please note that access to certain projects may be restricted based on nationality. RTX adheres to the principles of equal employment. All qualified applications will be given careful consideration without regard to ethnicity, color, religion, gender, sexual orientation or identity, national origin, age, disability, protected veteran status or any other characteristic protected by law. Privacy Policy and Terms: Click on this link to read the Policy and Terms
20/11/2026
Full time
Date Posted: 2026-11-06 Country: United Kingdom Location: Plymouth, Plymouth Position Role Type: Hybrid Collins Aerospace, a Raytheon Technologies company, is a world leader in advanced and intelligent solutions for the global aerospace and defence industries. With a comprehensive inertial sensing and integrated navigation technology portfolio and deep domain expertise, we deliver cutting-edge systems that solve our customers' toughest stabilisation, flight control and navigation challenges and help shape the future of aviation and defence. This is a hybrid role based at our Plymouth site, where we design and manufacture control, navigation, and guidance systems for both air and surface applications. Our world-class products include MEMS-based Inertial Measurement Units (IMUs) and the TERPROM Digital Terrain Reference Navigation System. Our growth plan includes development and extension of our current technologies into state of the art military and civil aircraft applications and we're looking for exceptional engineers to join us on that journey. As a Senior Systems Engineer, you'll play a key role in developing, integrating and validating complex embedded systems. Working across hardware, software and mechanical domains, you'll take technical ownership of defined systems or subsystems, influencing engineering decisions and supporting delivery from concept through to validation. What You Will Do Your day-to-day will include: Working with our customers and key stakeholders to lead the capture, analysis and definition of system-level use cases, concepts of operations and requirements for assigned systems or subsystems. Development of system architecture, taking technical ownership of architectural design decisions, requirements decomposition and associated technical trade-offs. Interfacing with stakeholders across Systems, Software, Electrical and Mechanical Engineering, driving the development and alignment of requirement specifications for each component of the system. Leading defined system integration activities for real-time embedded systems, including hardware/software interfaces, and resolving complex integration challenges. Ensuring requirement-to-requirement and requirements-to-test traceability throughout the design, identifying and resolving gaps, inconsistencies and technical risks. Developing test cases and procedures against requirements and executing tests, while contributing to verification strategies, reviewing results and resolving complex technical issues. Applying logical and innovative problem-solving across software, hardware and system levels, providing technical direction and recommendations on complex engineering challenges. Providing inputs to project planning, estimations and progress reporting, including ownership of technical estimates, risks and deliverables for assigned engineering work packages. Providing technical guidance to less experienced engineers and contributing to technical and design reviews. What You Will Learn At Collins Aerospace, your career development is as important as our technical innovation. You'll benefit from: Exposure to cutting-edge navigation and sensing technologies. Mentorship and training from industry-leading experts. Opportunities to work on mission-critical systems used globally. A supportive environment that encourages continuous learning and career progression. Qualifications & Experience Degree qualification in Software Engineering, Computer Science, Electronics, Aerospace Engineering or a related discipline, or equivalent industry experience. Excellent written and verbal communication skills with technical and non-technical stakeholders in a fast-paced environment. Demonstrated experience as a Systems Engineer, covering the full development lifecycle, including independently delivering complex systems engineering activities. Strong requirements analysis and management skills, including requirements decomposition and traceability. Experience of architectural design and decomposition, including evaluating technical trade-offs and contributing to system-level design decisions. Experience of creating test plans, test cases and procedures and executing test programmes. Experience with requirements management tools such as DOORS (or Jama or similar). Familiarity with version control systems (SVN, Git, Teamwork Cloud). Experience taking technical ownership of engineering deliverables and collaborating across multidisciplinary teams. Skills & Experience We Value Experience with SysML tools such as Enterprise Architect (or Cameo) is preferred. Ability to read and interpret schematics. Data analysis. Experience of Control Systems Engineering. Experience of Digital Signal Processing. Experience with platforms that utilise inertial sensors and associated requirements. Experience using COTS test equipment in a lab environment (oscilloscopes, bus analysers, etc.). Experience with hardware-in-the-loop testing. MATLAB. What We Offer: Competitive salary and comprehensive benefits package. Flexible working arrangements. Excellent 2:1 matched pension contribution (up to 10%). Private healthcare and life assurance. 25 days annual leave plus the option to buy or sell up to 5 days. Early finish Fridays and a culture that values work life balance. Ongoing career development, mentorship, and world class training. Learn More & Apply Now! Do you want to be a part of something bigger? A team whose impact stretches across the world, and even beyond? At Collins Aerospace, our Mission Systems team helps civilian, military and government customers complete their most complex missions - whatever and wherever they may be. Our customers depend on us for intelligent and secure communications, missionised systems for specialised aircraft and spacecraft and collaborative space solutions. By joining our team, you'll have your own critical part to play in ensuring our customers succeed today while anticipating their needs for tomorrow. Are you up for the challenge? Join our mission today. Hybrid: Employees who are working in Hybrid roles will work regularly both onsite and offsite. Ratio of time working onsite will be determined in partnership with your leader. Note: The successful candidate must hold an active or be willing and eligible to obtain SC level security clearance. Please note that access to certain projects may be restricted based on nationality. RTX adheres to the principles of equal employment. All qualified applications will be given careful consideration without regard to ethnicity, color, religion, gender, sexual orientation or identity, national origin, age, disability, protected veteran status or any other characteristic protected by law. Privacy Policy and Terms: Click on this link to read the Policy and Terms
We are looking for an experienced Senior Hardware Engineer to develop advanced inertial sensing, navigation and stabilisation products for defence, aerospace and industrial applications. You'll work on technologies including IMUs and navigation systems, used across airborne, land and marine platforms where accuracy and reliability are critical. This is a hands-on role covering product architecture, electronic and PCB design, prototype bring-up, multi-board integration and verification. Working with Systems, FPGA/Firmware, Mechanical and Manufacturing teams, you'll have the opportunity to influence new product designs and take technical ownership from concept through to production. Join a company that's reintroducing itself to the aviation community we've helped advance for more than a century. At Honeywell Aerospace (NASDAQ: HONA), we're launching as an independent, publicly traded aerospace and defense company built on a legacy of operational excellence and mission-focused execution. Our new brand identity pairs that heritage with real momentum, as we build technology that helps pilots navigate with confidence, aircraft operate more efficiently, and operators stay ahead of change. With our systems on board 90% of the world's aircraft, your work here has reach that's rare to find anywhere else. Focusing on our customers, investing in innovation, and building a culture of accountability and performance is how we're shaping what comes next. Every horizon. Every mission. Every day. Honeywell Aerospace products and services are found on aircraft across commercial aviation, defense and space - from engines and cockpit electronics to cabin systems, mechanical components and connectivity solutions. Our technology helps operators fly more safely, reduce fuel consumption, improve on-time performance and deliver a better experience for the people on board. As aviation continues to evolve, we're also developing systems to support autonomous and supersonic platforms, bringing the same focus on safety and efficiency to the next era of flight. With approximately 36,000 employees worldwide and net sales of $17.4B in 2025, Honeywell Aerospace is one of the largest dedicated aerospace companies in the world. Control Systems develops the thermal and motion control systems that help aircraft take off, land safely and protect the people on board. With more than 10 million passengers per day flying on aircraft equipped with our products and more than 75% of commercial flights beginning with our engine start systems, Control Systems reaches farther across the aviation industry than most people realize. Key Responsibilities • Define hardware requirements and hardware architectures from system-level requirements. • Design analog and digital electronics, including component selection, schematics and multilayer PCBs. • Design PCBA using Altium Designer and/or Siemens Xpedition design tools. • Define interfaces and oversee the integration of multiple boards and modules into complete products. • Lead prototype bring-up, debugging, verification and qualification activities. • Apply good design practice for EMI/EMC, signal and power integrity, reliability and manufacturability. • Provide technical leadership through design reviews, problem solving and multidisciplinary collaboration. Key Skills & Experience • 5+ years' industry experience in electronic hardware design and development. • Strong analog and digital board-level design experience. • Experience in product, hardware or system architecture, translating requirements into practical designs. • Strong PCB development experience using Altium Designer and/or Siemens Xpedition • Experience integrating and debugging multi-board electronic systems, ideally within defence, aerospace or other high-reliability applications. Beneficial Experience The following would be advantageous, but are not essential: • Knowledge of inertial or other sensor technologies, such as IMUs, MEMS or fibre-optic sensors. • Experience working within DO-254 or similar safety-critical/regulated hardware development environments. • Familiarity with FPGAs, microcontrollers, ADCs, DACs and mixed-signal electronics. • Experience with SPICE/OrCAD or equivalent simulation tools. • Experience of EMC qualification, environmental testing, DFA/DFM/DFT and PCBA manufacturing processes. We are an equal opportunity employer and value diversity at our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. Join a team recognized for leadership, innovation, and diversity
19/11/2026
Full time
We are looking for an experienced Senior Hardware Engineer to develop advanced inertial sensing, navigation and stabilisation products for defence, aerospace and industrial applications. You'll work on technologies including IMUs and navigation systems, used across airborne, land and marine platforms where accuracy and reliability are critical. This is a hands-on role covering product architecture, electronic and PCB design, prototype bring-up, multi-board integration and verification. Working with Systems, FPGA/Firmware, Mechanical and Manufacturing teams, you'll have the opportunity to influence new product designs and take technical ownership from concept through to production. Join a company that's reintroducing itself to the aviation community we've helped advance for more than a century. At Honeywell Aerospace (NASDAQ: HONA), we're launching as an independent, publicly traded aerospace and defense company built on a legacy of operational excellence and mission-focused execution. Our new brand identity pairs that heritage with real momentum, as we build technology that helps pilots navigate with confidence, aircraft operate more efficiently, and operators stay ahead of change. With our systems on board 90% of the world's aircraft, your work here has reach that's rare to find anywhere else. Focusing on our customers, investing in innovation, and building a culture of accountability and performance is how we're shaping what comes next. Every horizon. Every mission. Every day. Honeywell Aerospace products and services are found on aircraft across commercial aviation, defense and space - from engines and cockpit electronics to cabin systems, mechanical components and connectivity solutions. Our technology helps operators fly more safely, reduce fuel consumption, improve on-time performance and deliver a better experience for the people on board. As aviation continues to evolve, we're also developing systems to support autonomous and supersonic platforms, bringing the same focus on safety and efficiency to the next era of flight. With approximately 36,000 employees worldwide and net sales of $17.4B in 2025, Honeywell Aerospace is one of the largest dedicated aerospace companies in the world. Control Systems develops the thermal and motion control systems that help aircraft take off, land safely and protect the people on board. With more than 10 million passengers per day flying on aircraft equipped with our products and more than 75% of commercial flights beginning with our engine start systems, Control Systems reaches farther across the aviation industry than most people realize. Key Responsibilities • Define hardware requirements and hardware architectures from system-level requirements. • Design analog and digital electronics, including component selection, schematics and multilayer PCBs. • Design PCBA using Altium Designer and/or Siemens Xpedition design tools. • Define interfaces and oversee the integration of multiple boards and modules into complete products. • Lead prototype bring-up, debugging, verification and qualification activities. • Apply good design practice for EMI/EMC, signal and power integrity, reliability and manufacturability. • Provide technical leadership through design reviews, problem solving and multidisciplinary collaboration. Key Skills & Experience • 5+ years' industry experience in electronic hardware design and development. • Strong analog and digital board-level design experience. • Experience in product, hardware or system architecture, translating requirements into practical designs. • Strong PCB development experience using Altium Designer and/or Siemens Xpedition • Experience integrating and debugging multi-board electronic systems, ideally within defence, aerospace or other high-reliability applications. Beneficial Experience The following would be advantageous, but are not essential: • Knowledge of inertial or other sensor technologies, such as IMUs, MEMS or fibre-optic sensors. • Experience working within DO-254 or similar safety-critical/regulated hardware development environments. • Familiarity with FPGAs, microcontrollers, ADCs, DACs and mixed-signal electronics. • Experience with SPICE/OrCAD or equivalent simulation tools. • Experience of EMC qualification, environmental testing, DFA/DFM/DFT and PCBA manufacturing processes. We are an equal opportunity employer and value diversity at our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. Join a team recognized for leadership, innovation, and diversity
As an Advanced Systems Engineer here at Honeywell Aerospace, you will play a critical role in the design, implementation, and management of complex systems and solutions that drive innovation, safety, and efficiency across various industries. You will work within cross-functional teams on cutting-edge projects that transform the way businesses operate. You will report directly to our Engineering Manager, and you'll work out of our Edinburgh, UK location on an on-site work schedule. In this role, you will impact the development of advanced Software Defined Radio solutions for space communications systems, ensuring the design and architectural aspects of these complex systems meet Honeywell Aerospace's quality standards and industry best practices. Your leadership and technical expertise will be essential in delivering innovative, reliable, and high-performance communication systems that support critical space missions. Key Responsibilities Define and develop RF system and subsystem architectures for aerospace, space and defence applications Translate customer, platform and system-level requirements into clear and verifiable RF subsystem requirements Own products to drive technical decisions during design phases and ensure technical progress is on track to meet the project milestones Contribute to technical trade studies and make evidence-based architecture and design recommendations Collaborate closely with cross-functional teams including RF, hardware, firmware, mechanical and systems engineers to integrate system components effectively and ensure final product meets the requirements Define RF verification and validation strategies, test requirements and acceptance criteria Support laboratory integration, troubleshooting and RF performance testing Analyse test results and investigate system-level RF performance issues Support environmental and qualification testing including EMC/EMI, thermal, vibration and other relevant aerospace qualification activities Analyse test results and investigate system-level RF performance issues Participate in and, where appropriate, lead technical reviews including requirements reviews, design reviews, test readiness reviews and qualification reviews Support the Engineering Manager in resource planning, project scheduling, and reporting to senior leadership Contribute to continuous improvement of RF engineering processes, methods and design practices. Key Skills and Qualifications Bachelor's or Master's degree in Electronic Engineering, Electrical Engineering, RF/Microwave Engineering, Telecommunications Engineering, Physics or a related engineering discipline. 4+ years of industrial experience in RF systems engineering Strong understanding of RF system analysis, including: RF link budget calculation Linearity, Intermodulation, EVM, transmitter performance Noise figure, SNR, BER, Receiver sensitivity RF interference and spurious performance Strong command of applicable industry standards such as MIL-STD, ECSS, etc. Practical experience in requirements capture, decomposition and traceability as well as verification and validation Technical risk management and definition of mitigation strategies Comprehensive knowledge in RF system integration, implementation, and troubleshooting Ability to communicate complex technical information clearly to both specialist and non-specialist stakeholders Hands on experience with interpreting RF measurements and systematically troubleshooting complex RF problems Practical experience with RF laboratory equipment such as vector network analysers, spectrum analysers, signal generators, power meters, oscilloscopes, noise figure measurement equipment Experience producing high-quality engineering documentation and technical reports. Strong analytical and problem-solving capability. We Value Demonstrated hands-on experience in active RF design engineering is highly desirable Experience in radar systems engineering is considered a plus Experience in leading complex communication system integration projects in aerospace or space domains Knowledge of industry best practices and emerging technologies in space communications and software defined radio Ability to work in a fast-paced and dynamic environment Attention to detail and excellent problem-solving capability Focus on delivery to meet the project milestones Passion for innovation and continuous learning
19/11/2026
Full time
As an Advanced Systems Engineer here at Honeywell Aerospace, you will play a critical role in the design, implementation, and management of complex systems and solutions that drive innovation, safety, and efficiency across various industries. You will work within cross-functional teams on cutting-edge projects that transform the way businesses operate. You will report directly to our Engineering Manager, and you'll work out of our Edinburgh, UK location on an on-site work schedule. In this role, you will impact the development of advanced Software Defined Radio solutions for space communications systems, ensuring the design and architectural aspects of these complex systems meet Honeywell Aerospace's quality standards and industry best practices. Your leadership and technical expertise will be essential in delivering innovative, reliable, and high-performance communication systems that support critical space missions. Key Responsibilities Define and develop RF system and subsystem architectures for aerospace, space and defence applications Translate customer, platform and system-level requirements into clear and verifiable RF subsystem requirements Own products to drive technical decisions during design phases and ensure technical progress is on track to meet the project milestones Contribute to technical trade studies and make evidence-based architecture and design recommendations Collaborate closely with cross-functional teams including RF, hardware, firmware, mechanical and systems engineers to integrate system components effectively and ensure final product meets the requirements Define RF verification and validation strategies, test requirements and acceptance criteria Support laboratory integration, troubleshooting and RF performance testing Analyse test results and investigate system-level RF performance issues Support environmental and qualification testing including EMC/EMI, thermal, vibration and other relevant aerospace qualification activities Analyse test results and investigate system-level RF performance issues Participate in and, where appropriate, lead technical reviews including requirements reviews, design reviews, test readiness reviews and qualification reviews Support the Engineering Manager in resource planning, project scheduling, and reporting to senior leadership Contribute to continuous improvement of RF engineering processes, methods and design practices. Key Skills and Qualifications Bachelor's or Master's degree in Electronic Engineering, Electrical Engineering, RF/Microwave Engineering, Telecommunications Engineering, Physics or a related engineering discipline. 4+ years of industrial experience in RF systems engineering Strong understanding of RF system analysis, including: RF link budget calculation Linearity, Intermodulation, EVM, transmitter performance Noise figure, SNR, BER, Receiver sensitivity RF interference and spurious performance Strong command of applicable industry standards such as MIL-STD, ECSS, etc. Practical experience in requirements capture, decomposition and traceability as well as verification and validation Technical risk management and definition of mitigation strategies Comprehensive knowledge in RF system integration, implementation, and troubleshooting Ability to communicate complex technical information clearly to both specialist and non-specialist stakeholders Hands on experience with interpreting RF measurements and systematically troubleshooting complex RF problems Practical experience with RF laboratory equipment such as vector network analysers, spectrum analysers, signal generators, power meters, oscilloscopes, noise figure measurement equipment Experience producing high-quality engineering documentation and technical reports. Strong analytical and problem-solving capability. We Value Demonstrated hands-on experience in active RF design engineering is highly desirable Experience in radar systems engineering is considered a plus Experience in leading complex communication system integration projects in aerospace or space domains Knowledge of industry best practices and emerging technologies in space communications and software defined radio Ability to work in a fast-paced and dynamic environment Attention to detail and excellent problem-solving capability Focus on delivery to meet the project milestones Passion for innovation and continuous learning
Job Title: Systems Engineer Location: Christchurch, BH23 6NW Salary: Competitive Job Type: Full time, Permanent About us: Averna powered by Spherea designs, manufactures and supports complex test systems for aerospace, defence and other regulated industries. The role: You will connect customer needs with the technical solution, translating operational and test objectives into clear requirements, architectures, interfaces and verification strategies for hardware, software, mechanical and production teams. The role spans customer workshops, system design, technical reviews, laboratory integration, acceptance testing and commissioning. Regular in-person work alongside engineers and physical equipment is required; UK and international travel, including some overnight stays, may be required. Key responsibilities: Work with customers and stakeholders to understand products, test objectives, operating environments, constraints and acceptance expectations. Plan and lead requirements workshops, resolve unclear or conflicting needs, define concepts of operation and use cases, and translate needs into structured, verifiable system and subsystem requirements. Establish requirements baselines and traceability; identify assumptions, dependencies, constraints, exclusions and customer obligations; control changes and assess their technical, cost and schedule impact. Develop system concepts and assess feasibility. Define functional and physical architectures, decompose requirements across hardware, software, mechanical and operational elements, and document internal and external interfaces. Lead or contribute to technical trade-off studies and evidence-based recommendations. Work with specialists to select technologies, instruments, interfaces and design approaches, balancing performance, safety, reliability, maintainability, obsolescence, cost and schedule. Ensure solutions can be manufactured, integrated, tested, commissioned and supported throughout their intended life. Identify technical risks and mitigation actions, support modular and reusable solutions, and maintain technical coherence as detailed design develops. Support the full engineering lifecycle: stakeholder-needs analysis, concept of operation, feasibility, requirements, architecture, preliminary and detailed design, manufacture, integration, verification and validation, factory/site acceptance, commissioning, warranty and in-service support. Prepare for and contribute to system requirements, preliminary design, critical design and test-readiness reviews. Define evidence needed to demonstrate design maturity, coordinate specialist inputs and ensure decisions, deviations, concessions and changes are controlled. Develop verification and validation strategies, define methods such as analysis, inspection, demonstration and test, maintain requirements-verification traceability, and produce or coordinate test plans, specifications, procedures and acceptance documentation. Support integration testing, debugging, technical investigations, factory acceptance, customer demonstrations, installation and site commissioning. Coordinate resolution of cross-discipline problems and ensure evidence is complete and controlled. Work closely with hardware, software, electrical, mechanical, production, quality and project-management colleagues, customers and international delivery partners. Communicate technical status to the Project Manager and escalate unresolved issues affecting delivery. About you: Essential skills and experience: Degree, HNC/HND in electronic, electrical, aerospace engineering or a related discipline. Relevant systems engineering experience or equivalent practical experience in a related engineering discipline. Ability to work directly with customers to elicit, clarify and manage technical requirements and acceptance expectations. Experience translating needs into system requirements, architectures, interfaces and verification approaches. Understanding of multidisciplinary engineered systems and the lifecycle from concept and design through integration, verification, acceptance and support. Ability to analyse technical trade-offs, manage requirements traceability and change, identify risk and maintain alignment between requirements, design and verification evidence. Experience contributing to technical reviews, test planning, integration, fault investigation or acceptance activities. Strong analytical and problem-solving skills, clear communication, collaborative working and the initiative to pursue missing information and resolve uncertainty. Comfortable working alongside engineering teams and physical test equipment, with willingness to travel occasionally in the UK and internationally. Right to work in the UK. Desirable experience: Aerospace, defence, space, rail, energy or another regulated sector; automated or special-to-type test equipment. Electronic, electrical, software-controlled or electromechanical systems; data acquisition, instrumentation, control or test-system integration. Requirements-management tools, formal design reviews, verification and validation, factory/site acceptance and commissioning. Legacy-system modernisation, obsolescence, maintainability and long-life equipment support. Working with international teams, customers or delivery partners. Security requirements: Applicants must be eligible to obtain and maintain the level of UK national security clearance required. Some programmes may have additional nationality, residency or export-control restrictions. Working arrangements: The role may be based in Bournemouth or elsewhere in the UK where the arrangement supports effective delivery. Regular on-site engagement is essential. Benefits include: Competitive salary Pension Family healthcare and health cash plans 27 days' annual leave plus UK bank holidays Cycle-to-work scheme Professional development Please click the APPLY button and to submit your CV and Cover Letter. Test Hardware Engineer, Electrical Test Equipment Engineer, ATE Hardware Engineer
19/11/2026
Full time
Job Title: Systems Engineer Location: Christchurch, BH23 6NW Salary: Competitive Job Type: Full time, Permanent About us: Averna powered by Spherea designs, manufactures and supports complex test systems for aerospace, defence and other regulated industries. The role: You will connect customer needs with the technical solution, translating operational and test objectives into clear requirements, architectures, interfaces and verification strategies for hardware, software, mechanical and production teams. The role spans customer workshops, system design, technical reviews, laboratory integration, acceptance testing and commissioning. Regular in-person work alongside engineers and physical equipment is required; UK and international travel, including some overnight stays, may be required. Key responsibilities: Work with customers and stakeholders to understand products, test objectives, operating environments, constraints and acceptance expectations. Plan and lead requirements workshops, resolve unclear or conflicting needs, define concepts of operation and use cases, and translate needs into structured, verifiable system and subsystem requirements. Establish requirements baselines and traceability; identify assumptions, dependencies, constraints, exclusions and customer obligations; control changes and assess their technical, cost and schedule impact. Develop system concepts and assess feasibility. Define functional and physical architectures, decompose requirements across hardware, software, mechanical and operational elements, and document internal and external interfaces. Lead or contribute to technical trade-off studies and evidence-based recommendations. Work with specialists to select technologies, instruments, interfaces and design approaches, balancing performance, safety, reliability, maintainability, obsolescence, cost and schedule. Ensure solutions can be manufactured, integrated, tested, commissioned and supported throughout their intended life. Identify technical risks and mitigation actions, support modular and reusable solutions, and maintain technical coherence as detailed design develops. Support the full engineering lifecycle: stakeholder-needs analysis, concept of operation, feasibility, requirements, architecture, preliminary and detailed design, manufacture, integration, verification and validation, factory/site acceptance, commissioning, warranty and in-service support. Prepare for and contribute to system requirements, preliminary design, critical design and test-readiness reviews. Define evidence needed to demonstrate design maturity, coordinate specialist inputs and ensure decisions, deviations, concessions and changes are controlled. Develop verification and validation strategies, define methods such as analysis, inspection, demonstration and test, maintain requirements-verification traceability, and produce or coordinate test plans, specifications, procedures and acceptance documentation. Support integration testing, debugging, technical investigations, factory acceptance, customer demonstrations, installation and site commissioning. Coordinate resolution of cross-discipline problems and ensure evidence is complete and controlled. Work closely with hardware, software, electrical, mechanical, production, quality and project-management colleagues, customers and international delivery partners. Communicate technical status to the Project Manager and escalate unresolved issues affecting delivery. About you: Essential skills and experience: Degree, HNC/HND in electronic, electrical, aerospace engineering or a related discipline. Relevant systems engineering experience or equivalent practical experience in a related engineering discipline. Ability to work directly with customers to elicit, clarify and manage technical requirements and acceptance expectations. Experience translating needs into system requirements, architectures, interfaces and verification approaches. Understanding of multidisciplinary engineered systems and the lifecycle from concept and design through integration, verification, acceptance and support. Ability to analyse technical trade-offs, manage requirements traceability and change, identify risk and maintain alignment between requirements, design and verification evidence. Experience contributing to technical reviews, test planning, integration, fault investigation or acceptance activities. Strong analytical and problem-solving skills, clear communication, collaborative working and the initiative to pursue missing information and resolve uncertainty. Comfortable working alongside engineering teams and physical test equipment, with willingness to travel occasionally in the UK and internationally. Right to work in the UK. Desirable experience: Aerospace, defence, space, rail, energy or another regulated sector; automated or special-to-type test equipment. Electronic, electrical, software-controlled or electromechanical systems; data acquisition, instrumentation, control or test-system integration. Requirements-management tools, formal design reviews, verification and validation, factory/site acceptance and commissioning. Legacy-system modernisation, obsolescence, maintainability and long-life equipment support. Working with international teams, customers or delivery partners. Security requirements: Applicants must be eligible to obtain and maintain the level of UK national security clearance required. Some programmes may have additional nationality, residency or export-control restrictions. Working arrangements: The role may be based in Bournemouth or elsewhere in the UK where the arrangement supports effective delivery. Regular on-site engagement is essential. Benefits include: Competitive salary Pension Family healthcare and health cash plans 27 days' annual leave plus UK bank holidays Cycle-to-work scheme Professional development Please click the APPLY button and to submit your CV and Cover Letter. Test Hardware Engineer, Electrical Test Equipment Engineer, ATE Hardware Engineer
Senior UAV Robotics & Systems Engineer Location: Thruxton, Hampshire Salary: £50,000-£75,000 DOE Type: Permanent, full-time The Opportunity We're working with an ambitious UK-based defence and UAV technology business developing next-generation unmanned aircraft systems With a small, highly experienced team and a growing portfolio of defence contracts, the business is entering an exciting stage of development as it looks to take its latest platform from development through to commercialisation. They're looking for a Senior UAV Robotics & Systems Engineer to join the team and play a key role in developing, integrating and advancing their autonomous aircraft technology. This is a fantastic opportunity for an engineer who wants more than just another role. You'll have real ownership, direct access to the leadership team and the opportunity to influence the technical direction of a developing product. The Role You'll take a hands-on role across UAV robotics, autonomous systems and flight control development. Working closely with the Operations Director, Managing Director and R&D leadership, you'll help develop, integrate, test and refine the systems that underpin the aircraft. Your responsibilities will include: Developing and integrating Linux-based robotics and autonomous systems using ROS 2. Working with UAV autopilot platforms such as ArduPilot and PX4. Developing and integrating flight control and communication systems using MAVLink. Using Python and C++ to develop and improve autonomous functionality. Supporting the integration, configuration and optimisation of UAV systems. Getting hands-on with aircraft build, testing, flight trials and system tuning. Troubleshooting technical challenges across hardware and software interfaces. Supporting the development of robust and reliable autonomous flight capabilities. Contributing to operational readiness, including an understanding of CAA regulations, SORA and risk assessments. What We're Looking For We're interested in engineers who combine strong technical capability with a practical, hands-on approach to developing real-world autonomous systems. Ideally, you'll bring: Experience in UAV, UAS, drone or autonomous aircraft development. Strong experience with Linux-based systems and ROS 2. Knowledge of ArduPilot or PX4 autopilot systems. Programming experience in Python and C++. Familiarity with MAVLink and UAV communication protocols. Experience integrating, testing and troubleshooting complex robotic systems. Practical experience building, flying, configuring or tuning UAV platforms. An understanding of aviation regulations, CAA requirements and SORA processes. You'll ideally have a degree or technical apprenticeship in a relevant STEM discipline, such as Robotics, Systems Engineering, Aerospace Engineering or a related field. We're open to different technical backgrounds, provided you have the relevant practical experience and engineering ability.
19/11/2026
Full time
Senior UAV Robotics & Systems Engineer Location: Thruxton, Hampshire Salary: £50,000-£75,000 DOE Type: Permanent, full-time The Opportunity We're working with an ambitious UK-based defence and UAV technology business developing next-generation unmanned aircraft systems With a small, highly experienced team and a growing portfolio of defence contracts, the business is entering an exciting stage of development as it looks to take its latest platform from development through to commercialisation. They're looking for a Senior UAV Robotics & Systems Engineer to join the team and play a key role in developing, integrating and advancing their autonomous aircraft technology. This is a fantastic opportunity for an engineer who wants more than just another role. You'll have real ownership, direct access to the leadership team and the opportunity to influence the technical direction of a developing product. The Role You'll take a hands-on role across UAV robotics, autonomous systems and flight control development. Working closely with the Operations Director, Managing Director and R&D leadership, you'll help develop, integrate, test and refine the systems that underpin the aircraft. Your responsibilities will include: Developing and integrating Linux-based robotics and autonomous systems using ROS 2. Working with UAV autopilot platforms such as ArduPilot and PX4. Developing and integrating flight control and communication systems using MAVLink. Using Python and C++ to develop and improve autonomous functionality. Supporting the integration, configuration and optimisation of UAV systems. Getting hands-on with aircraft build, testing, flight trials and system tuning. Troubleshooting technical challenges across hardware and software interfaces. Supporting the development of robust and reliable autonomous flight capabilities. Contributing to operational readiness, including an understanding of CAA regulations, SORA and risk assessments. What We're Looking For We're interested in engineers who combine strong technical capability with a practical, hands-on approach to developing real-world autonomous systems. Ideally, you'll bring: Experience in UAV, UAS, drone or autonomous aircraft development. Strong experience with Linux-based systems and ROS 2. Knowledge of ArduPilot or PX4 autopilot systems. Programming experience in Python and C++. Familiarity with MAVLink and UAV communication protocols. Experience integrating, testing and troubleshooting complex robotic systems. Practical experience building, flying, configuring or tuning UAV platforms. An understanding of aviation regulations, CAA requirements and SORA processes. You'll ideally have a degree or technical apprenticeship in a relevant STEM discipline, such as Robotics, Systems Engineering, Aerospace Engineering or a related field. We're open to different technical backgrounds, provided you have the relevant practical experience and engineering ability.
Are you an electronics hardware engineer who wants hands-on access to the very newest generation of Intel silicon? Our client has delivered high-performance embedded computing solutions across defence, telecoms, aerospace and more for decades, delivering best-in-class solutions that allow the latest generations of compute power to exist in the harshest of environments. The Role Once a product ships, someone owns it for the rest of its life. That's this role. The early product hardware team spend six months to two years taking a product from spec to market; once it's out in the field, you take over. You'll solve the problems production and customers uncover, stay ahead of component obsolescence, and evolve the board to keep it competitive for years to come. It means working on today's most advanced compute technology without the year-or-two design grind to get there. Every product you touch is already proven in the field, so you're solving real problems, not theoretical ones. Your candid feedback and collaborative spirit will help evolve hardware methodologies to keep mission-critical systems at the leading edge. This is a hands-on role with a lot of lab work. You'll be as comfortable with an oscilloscope and logic analyser as you are at a screen, so it's an office-based role, though there is flexibility when life requires, or on the rare occasions when you don't need access to the products, and the oscilloscope. What You Will Be Doing Full ownership of product redesign, from investigating reported issues through to a verified fix Testing and redesign of existing products post-design: From prototype validation through to production, incorporating customer and production feedback Lead the complete re-design of legacy products Integrate the latest market components to extend product lifecycles Create and modernise schematics and high-density PCB designs (16-20 layers), and verify layout work for signal integrity Tackle component obsolescence, and manage documentation Conduct design reviews, troubleshooting, and debugging using oscilloscopes, logic analysers, and environmental test chambers Report on technical progress Actively shape hardware development processes What We Are Looking For 3+ years of professional electronics engineering experience with a strong focus on high-speed digital circuit design and debugging Degree in a discipline relevant to electronics A desire to work with high-performance Intel architecture and the newest generation of compute silicon Understanding of complex, high-layer-count PCB design well enough to review and verify layout work, including signal integrity considerations such as crosstalk Desirable But Not Required A desire to work with PC motherboard architecture (64-bit microprocessors, PCI Express, Ethernet, DDR4 Memory) or Inten chipsets FPGAs Some understanding of embedded software Benefits Up to 10% employer contribution pension 25 days holidays with holiday purchase scheme Annual bonus / profit share Cycle to work, Home & Tech and car salary sacrifice schemes Death in service benefit & income protection Wellbeing - Employee assistance / virtual GP / enhanced parental leave / private health insurance / wellbeing apps / paid volunteering days
19/11/2026
Full time
Are you an electronics hardware engineer who wants hands-on access to the very newest generation of Intel silicon? Our client has delivered high-performance embedded computing solutions across defence, telecoms, aerospace and more for decades, delivering best-in-class solutions that allow the latest generations of compute power to exist in the harshest of environments. The Role Once a product ships, someone owns it for the rest of its life. That's this role. The early product hardware team spend six months to two years taking a product from spec to market; once it's out in the field, you take over. You'll solve the problems production and customers uncover, stay ahead of component obsolescence, and evolve the board to keep it competitive for years to come. It means working on today's most advanced compute technology without the year-or-two design grind to get there. Every product you touch is already proven in the field, so you're solving real problems, not theoretical ones. Your candid feedback and collaborative spirit will help evolve hardware methodologies to keep mission-critical systems at the leading edge. This is a hands-on role with a lot of lab work. You'll be as comfortable with an oscilloscope and logic analyser as you are at a screen, so it's an office-based role, though there is flexibility when life requires, or on the rare occasions when you don't need access to the products, and the oscilloscope. What You Will Be Doing Full ownership of product redesign, from investigating reported issues through to a verified fix Testing and redesign of existing products post-design: From prototype validation through to production, incorporating customer and production feedback Lead the complete re-design of legacy products Integrate the latest market components to extend product lifecycles Create and modernise schematics and high-density PCB designs (16-20 layers), and verify layout work for signal integrity Tackle component obsolescence, and manage documentation Conduct design reviews, troubleshooting, and debugging using oscilloscopes, logic analysers, and environmental test chambers Report on technical progress Actively shape hardware development processes What We Are Looking For 3+ years of professional electronics engineering experience with a strong focus on high-speed digital circuit design and debugging Degree in a discipline relevant to electronics A desire to work with high-performance Intel architecture and the newest generation of compute silicon Understanding of complex, high-layer-count PCB design well enough to review and verify layout work, including signal integrity considerations such as crosstalk Desirable But Not Required A desire to work with PC motherboard architecture (64-bit microprocessors, PCI Express, Ethernet, DDR4 Memory) or Inten chipsets FPGAs Some understanding of embedded software Benefits Up to 10% employer contribution pension 25 days holidays with holiday purchase scheme Annual bonus / profit share Cycle to work, Home & Tech and car salary sacrifice schemes Death in service benefit & income protection Wellbeing - Employee assistance / virtual GP / enhanced parental leave / private health insurance / wellbeing apps / paid volunteering days
Role : Network Engineer Salary : £45K - £55K Base Location : On-site, Office based (Chesham) & remote About Us We provide cutting-edge wireless technology solutions partnering with industry leading organisations across a diverse range of sectors in education, public sector, construction, healthcare and leisure since 2019 and our business has grown rapidly with over 50% growth last year alone. The Role As a key member of our technical team the Network Engineer is responsible for helping design, implementing, and maintaining our networking solutions for our diverse range of clients. This role involves ensuring network reliability, security, and performance while supporting our clients IT infrastructure needs. The role will be a mixture of onsite & office based (Chesham). You will be responsible for leading the installation and maintenance of our networking solutions at client sites, including but not limited to: Enterprise Grade WiFi and networking solutions - Experience with Ruckus, Aruba and Cisco ideally Switching - Experience with Ruckus, Aruba and Cisco ideally Firewalls & Routers WAN / SD-WAN Connectivity Responsibilities Network Design and Architecture: Completing Wi-Fi surveys. Evaluate and recommend network hardware and software solutions. Create network diagrams and documentation. Network Configuration and Maintenance: Configure and maintain routers, switches, firewalls, wireless LAN, VPN, QoS and other network devices/services. Monitor network performance and troubleshoot issues. Perform regular network maintenance tasks, such as software updates and patches. Network Monitoring and Optimisation: Monitor network traffic and analyse data to optimise network performance. Identify and resolve network bottlenecks and connectivity issues. Implement Quality of Service (QoS) and traffic shaping policies. Network Troubleshooting & helpdesk : Providing Level-2/3 support and troubleshooting to resolve issues. Diagnose and resolve network outages and connectivity problems. Collaborate with other IT teams and service providers to resolve complex issues. Maintain detailed incident and resolution records. Network Documentation: Maintain accurate network documentation, including configurations, diagrams, and inventory. Update network diagrams and documentation as changes are made. Collaboration and Communication: Work closely with other IT professionals and departments to support their network needs. Communicate technical information effectively to non-technical stakeholders. Qualifications & Skills Industry certifications such as Cisco Certified Network Associate (CCNA), CompTIA Network+, or equivalent. Proven experience as a Network Engineer or similar role. Vendor experience - Ruckus, Aruba, Cisco, Fortinet, Watchguard Strong knowledge of networking protocols, including TCP/IP, OSPF, VLANs, and VPNs. Familiarity with network security best practices and technologies. Proficiency in network monitoring and troubleshooting tools. Excellent problem-solving and analytical skills. Excellent communications skills with the ability to convey ideas and offer IT solutions to colleagues. The ability to support non-technical customers and explain complex IT concepts in simple terms. Excellent organisational skills with the ability to manage priorities and work to deadlines. A Network Engineer plays a critical role in ensuring the organisation's network infrastructure is reliable, secure, and capable of meeting the evolving needs of the business. You will be representing the company at our client sites so ensuring our installations are of the highest quality and effectively addressing any immediate concerns.
19/11/2026
Full time
Role : Network Engineer Salary : £45K - £55K Base Location : On-site, Office based (Chesham) & remote About Us We provide cutting-edge wireless technology solutions partnering with industry leading organisations across a diverse range of sectors in education, public sector, construction, healthcare and leisure since 2019 and our business has grown rapidly with over 50% growth last year alone. The Role As a key member of our technical team the Network Engineer is responsible for helping design, implementing, and maintaining our networking solutions for our diverse range of clients. This role involves ensuring network reliability, security, and performance while supporting our clients IT infrastructure needs. The role will be a mixture of onsite & office based (Chesham). You will be responsible for leading the installation and maintenance of our networking solutions at client sites, including but not limited to: Enterprise Grade WiFi and networking solutions - Experience with Ruckus, Aruba and Cisco ideally Switching - Experience with Ruckus, Aruba and Cisco ideally Firewalls & Routers WAN / SD-WAN Connectivity Responsibilities Network Design and Architecture: Completing Wi-Fi surveys. Evaluate and recommend network hardware and software solutions. Create network diagrams and documentation. Network Configuration and Maintenance: Configure and maintain routers, switches, firewalls, wireless LAN, VPN, QoS and other network devices/services. Monitor network performance and troubleshoot issues. Perform regular network maintenance tasks, such as software updates and patches. Network Monitoring and Optimisation: Monitor network traffic and analyse data to optimise network performance. Identify and resolve network bottlenecks and connectivity issues. Implement Quality of Service (QoS) and traffic shaping policies. Network Troubleshooting & helpdesk : Providing Level-2/3 support and troubleshooting to resolve issues. Diagnose and resolve network outages and connectivity problems. Collaborate with other IT teams and service providers to resolve complex issues. Maintain detailed incident and resolution records. Network Documentation: Maintain accurate network documentation, including configurations, diagrams, and inventory. Update network diagrams and documentation as changes are made. Collaboration and Communication: Work closely with other IT professionals and departments to support their network needs. Communicate technical information effectively to non-technical stakeholders. Qualifications & Skills Industry certifications such as Cisco Certified Network Associate (CCNA), CompTIA Network+, or equivalent. Proven experience as a Network Engineer or similar role. Vendor experience - Ruckus, Aruba, Cisco, Fortinet, Watchguard Strong knowledge of networking protocols, including TCP/IP, OSPF, VLANs, and VPNs. Familiarity with network security best practices and technologies. Proficiency in network monitoring and troubleshooting tools. Excellent problem-solving and analytical skills. Excellent communications skills with the ability to convey ideas and offer IT solutions to colleagues. The ability to support non-technical customers and explain complex IT concepts in simple terms. Excellent organisational skills with the ability to manage priorities and work to deadlines. A Network Engineer plays a critical role in ensuring the organisation's network infrastructure is reliable, secure, and capable of meeting the evolving needs of the business. You will be representing the company at our client sites so ensuring our installations are of the highest quality and effectively addressing any immediate concerns.
Senior Embedded Systems Engineer Location: Banbury Hybrid Working: 3 days onsite / 2 days remote Salary: Competitive + Benefits Overview: Are you an experienced Embedded Electronics Engineer looking to work on cutting-edge technology with genuine product ownership? Our client is involved in high-performance electronic systems used across a wide range of industrial applications, and due to continued growth and investment in R&D, we are looking for a Senior Embedded Systems Engineer to join our engineering team in Oxfordshire. This is an excellent opportunity to work across the full product lifecycle, combining embedded firmware development, electronics design and new product innovation within a highly collaborative engineering environment. What You'll Be Doing: As a key member of the R&D team, you will design, develop and support next-generation embedded electronic products, taking projects from concept through to production. Your responsibilities will include: • Embedded firmware development using Embedded C • Design of analogue and digital electronic circuits • Schematic capture and PCB design/layout • Development of microcontroller-based systems • Working with ARM Cortex, PIC and similar embedded platforms • Design and development of communication interfaces including SPI, I2C, RS232, RS485 and Ethernet • Hardware and firmware debugging, testing and validation • Supporting power electronic designs including DC-DC converters and constant current circuits • EMC-conscious product design and compliance activities • Rapid prototyping, testing and product development • Supporting products throughout their lifecycle from concept to production What We're Looking For: Essential Skills & Experience: • Degree-qualified in Electronics Engineering, Embedded Systems or a related discipline • Proven experience in embedded electronics design • Strong Embedded C programming skills • Experience designing analogue and digital electronic circuits • PCB design and schematic capture experience • Experience with microcontrollers and embedded systems • Hardware and firmware debugging experience • Ability to work across multidisciplinary engineering projects Desirable Skills: • ARM Cortex platforms • PIC microcontrollers • Power electronics design • EMC design and compliance • Ethernet communications • 3D CAD experience • Rapid prototyping and 3D printing • Product development within a manufacturing environment Why Join? • Work on innovative, market-leading technology • Hybrid working arrangement • High level of technical autonomy • Modern engineering and laboratory facilities • Strong focus on innovation and R&D • Career progression opportunities • Supportive and collaborative engineering culture • Opportunity to influence future product development If you're passionate about embedded systems, electronics design and developing real-world products that make a global impact, we'd love to hear from you. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
19/11/2026
Full time
Senior Embedded Systems Engineer Location: Banbury Hybrid Working: 3 days onsite / 2 days remote Salary: Competitive + Benefits Overview: Are you an experienced Embedded Electronics Engineer looking to work on cutting-edge technology with genuine product ownership? Our client is involved in high-performance electronic systems used across a wide range of industrial applications, and due to continued growth and investment in R&D, we are looking for a Senior Embedded Systems Engineer to join our engineering team in Oxfordshire. This is an excellent opportunity to work across the full product lifecycle, combining embedded firmware development, electronics design and new product innovation within a highly collaborative engineering environment. What You'll Be Doing: As a key member of the R&D team, you will design, develop and support next-generation embedded electronic products, taking projects from concept through to production. Your responsibilities will include: • Embedded firmware development using Embedded C • Design of analogue and digital electronic circuits • Schematic capture and PCB design/layout • Development of microcontroller-based systems • Working with ARM Cortex, PIC and similar embedded platforms • Design and development of communication interfaces including SPI, I2C, RS232, RS485 and Ethernet • Hardware and firmware debugging, testing and validation • Supporting power electronic designs including DC-DC converters and constant current circuits • EMC-conscious product design and compliance activities • Rapid prototyping, testing and product development • Supporting products throughout their lifecycle from concept to production What We're Looking For: Essential Skills & Experience: • Degree-qualified in Electronics Engineering, Embedded Systems or a related discipline • Proven experience in embedded electronics design • Strong Embedded C programming skills • Experience designing analogue and digital electronic circuits • PCB design and schematic capture experience • Experience with microcontrollers and embedded systems • Hardware and firmware debugging experience • Ability to work across multidisciplinary engineering projects Desirable Skills: • ARM Cortex platforms • PIC microcontrollers • Power electronics design • EMC design and compliance • Ethernet communications • 3D CAD experience • Rapid prototyping and 3D printing • Product development within a manufacturing environment Why Join? • Work on innovative, market-leading technology • Hybrid working arrangement • High level of technical autonomy • Modern engineering and laboratory facilities • Strong focus on innovation and R&D • Career progression opportunities • Supportive and collaborative engineering culture • Opportunity to influence future product development If you're passionate about embedded systems, electronics design and developing real-world products that make a global impact, we'd love to hear from you. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Senior Systems Engineer Location: Hampshire (with occasional UK & international travel) Overview Our client is a well-established engineering organisation specialising in the design and delivery of advanced technology solutions used in highly complex and challenging environments, including offshore and subsea applications. Due to continued growth, they are looking to appoint a Senior Systems Engineer to join a specialist team delivering bespoke, high-performance systems. This role offers the opportunity to work across the full engineering lifecycle - from early concept development through to integration, validation and final delivery. You'll be joining a collaborative, multi-disciplinary engineering team, contributing to technically demanding projects with global reach. Key Responsibilities Lead the technical development and delivery of complex, custom-built systems and instrumentation Provide technical oversight across the full project lifecycle, from concept through to delivery Work closely with internal teams and customers to define requirements and develop effective solutions Support bid activity, including technical proposals, planning and effort estimation Oversee system integration, verification and validation across hardware, firmware and software elements Ensure solutions meet customer specifications, compliance standards and commercial objectives Coordinate work across software, electronics, mechanical and systems engineering teams Diagnose and resolve technical issues at both subsystem and system level Produce and maintain high-quality technical documentation, including specifications, reports and test records Identify and manage technical risks, providing updates to stakeholders Represent the engineering team in customer meetings, trials and technical discussions Support ongoing operations by providing technical expertise and engineering support About You You will be an experienced engineer with strong systems-thinking capability and the ability to operate across complex engineering programmes, ideally within offshore or subsea environments. You will ideally have experience in: Systems engineering, engineering design or complex product/project delivery Working with customers and stakeholders in technical environments Fault finding, root cause analysis and problem-solving System integration and software-led systems Mechanical and/or analogue and digital electronics engineering Producing structured technical documentation Managing multiple projects and competing priorities Exposure to tools such as CAD and project/task management systems (e.g. Jira) Qualifications Degree qualified in an Engineering discipline such as: Systems Engineering Electronics Engineering Mechanical Engineering Software Engineering Communications Engineering Or a related field The Opportunity Work on technically advanced systems supporting offshore and subsea operations Be part of a collaborative, innovative engineering environment Contribute to complex projects with real-world global impact Opportunity for occasional UK and international travel, including: Customer locations Offshore environments Specialist testing facilities Interest If interested in this role please contact Chrissie Rehman on the link provided or email INDTECH DCS Recruitment and all associated companies are committed to creating a working environment where diversity is celebrated and everyone is treated fairly, regardless of gender, gender identity, disability, ethnic origin, religion or belief, sexual orientation, marital or transgender status, age, or nationality
19/11/2026
Full time
Senior Systems Engineer Location: Hampshire (with occasional UK & international travel) Overview Our client is a well-established engineering organisation specialising in the design and delivery of advanced technology solutions used in highly complex and challenging environments, including offshore and subsea applications. Due to continued growth, they are looking to appoint a Senior Systems Engineer to join a specialist team delivering bespoke, high-performance systems. This role offers the opportunity to work across the full engineering lifecycle - from early concept development through to integration, validation and final delivery. You'll be joining a collaborative, multi-disciplinary engineering team, contributing to technically demanding projects with global reach. Key Responsibilities Lead the technical development and delivery of complex, custom-built systems and instrumentation Provide technical oversight across the full project lifecycle, from concept through to delivery Work closely with internal teams and customers to define requirements and develop effective solutions Support bid activity, including technical proposals, planning and effort estimation Oversee system integration, verification and validation across hardware, firmware and software elements Ensure solutions meet customer specifications, compliance standards and commercial objectives Coordinate work across software, electronics, mechanical and systems engineering teams Diagnose and resolve technical issues at both subsystem and system level Produce and maintain high-quality technical documentation, including specifications, reports and test records Identify and manage technical risks, providing updates to stakeholders Represent the engineering team in customer meetings, trials and technical discussions Support ongoing operations by providing technical expertise and engineering support About You You will be an experienced engineer with strong systems-thinking capability and the ability to operate across complex engineering programmes, ideally within offshore or subsea environments. You will ideally have experience in: Systems engineering, engineering design or complex product/project delivery Working with customers and stakeholders in technical environments Fault finding, root cause analysis and problem-solving System integration and software-led systems Mechanical and/or analogue and digital electronics engineering Producing structured technical documentation Managing multiple projects and competing priorities Exposure to tools such as CAD and project/task management systems (e.g. Jira) Qualifications Degree qualified in an Engineering discipline such as: Systems Engineering Electronics Engineering Mechanical Engineering Software Engineering Communications Engineering Or a related field The Opportunity Work on technically advanced systems supporting offshore and subsea operations Be part of a collaborative, innovative engineering environment Contribute to complex projects with real-world global impact Opportunity for occasional UK and international travel, including: Customer locations Offshore environments Specialist testing facilities Interest If interested in this role please contact Chrissie Rehman on the link provided or email INDTECH DCS Recruitment and all associated companies are committed to creating a working environment where diversity is celebrated and everyone is treated fairly, regardless of gender, gender identity, disability, ethnic origin, religion or belief, sexual orientation, marital or transgender status, age, or nationality
At Dstl, our vision is to have a modern way of working efficiently, accommodating and enabling our people to create, collaborate and deliver. To do this successfully in this job will require attendance at a Dstl location, Government Departments including wider MoD or Delivery and Mission Partner premises for at least 80% of your working time. About the job Job summary Are you passionate about solving complex engineering challenges and shaping the future of cyber and defence capabilities? Dstl is looking for a Senior Systems Engineer to join a multidisciplinary team responsible for transforming cutting-edge research into operational capabilities that support national security and defence objectives. This is an exciting opportunity to work on complex, high-impact programmes, helping to define, design and assure systems that integrate people, process and technology into coherent, effective solutions. Why join us? As a Senior Systems Engineer, you will play a key role in translating complex stakeholder and customer needs into system architectures, requirements and technical solutions. You will work across a diverse range of projects, providing technical leadership, supporting strategic decision-making and ensuring that solutions are safe, secure, robust and fit for purpose. Working alongside scientists, engineers, project managers and external partners, you will apply systems engineering principles to complex cyber and technology challenges. You will help develop architectural models, influence engineering standards and enable effective integration across capabilities, ensuring solutions meet both current operational needs and future requirements. This role offers the opportunity to apply your systems thinking and engineering expertise in a unique environment where innovation, collaboration and technical excellence are critical to delivering capability that makes a real-world difference. This role is eligible for an additional specialist allowance of £2758 annually subject to meeting extended onboarding requirements. The role may be eligible for additional skills allowances depending on the skills and experience of the applicant. Job description What you'll do; Translate complex customer and stakeholder needs into clear system architectures, requirements and engineering solutions. Apply systems engineering and systems thinking approaches to solve challenging technical and operational problems. Provide technical leadership on complex projects, ensuring solutions align with customer, business, safety and security requirements. Develop and maintain architectural models that support informed decision-making, integration and capability development. Support the development, assurance and delivery of cyber and defence capabilities across the system lifecycle. Promote the use of engineering standards, frameworks and open-system approaches to improve interoperability and consistency. Analyse complex technical information and communicate findings through high-quality documentation, reports and presentations. Work collaboratively with internal and external stakeholders to deliver high-quality outcomes across multiple priorities. For more information on the job responsibilities, please see the job profile attached below. Person specification What we're looking for A degree in a STEM discipline such as Systems Engineering, Engineering, Software Engineering, Computer Science, Physics or Mathematics, or equivalent professional experience. An understanding of Systems Engineering and/or Systems Thinking methodologies and their practical application. Knowledge of the development and assurance of complex technical systems or capabilities. An awareness of software engineering and how software integrates with hardware, embedded systems and wider system architectures. Experience solving complex, non-routine technical problems and making evidence-based engineering assessments. Experience applying systems engineering techniques within an engineering, technology or scientific environment. Strong analytical, problem-solving and stakeholder engagement skills. The ability to communicate complex technical information clearly to a range of audiences. Please review the attached job description for more detailed information. Important Information: Our work in defence, security and intelligence requires our employees to be UK Nationals who are able to gain a high level of security clearance to undertake the projects we are involved in to protect us from security threats. For this reason, only UK Nationals will be able to apply for this role. If you are an international or dual-national candidate, and you think you have the skills we need, please consider applying to any of our government, security or defence partners. This role will require Develop Vetting and you should have resided in the UK for the past 10 years. Behaviours We'll assess you against these behaviours during the selection process: Delivering at Pace Communicating and Influencing Working Together Changing and Improving Benefits Alongside your salary of £41,431, Defence Science and Technology Laboratory contributes £12,002 towards you being a member of the Civil Service Defined Benefit Pension scheme. Find out what benefits a Civil Service Pension provides (opens in a new window). Benefits Dstl s full range of great benefits can be found in the information pack which includes: Financial: An excellent pension scheme starting from 26% employer contribution ( find out more here ). In Year Rewarding Achievement bonuses and thank you vouchers. Rental deposit scheme and cycle to work scheme. Allowances: This role is eligible for an additional specialist allowance of £2758 annually subject to meeting extended onboarding requirements. The role may be eligible for additional skills allowances depending on the skills and experience of the applicant. Flexible working : Options include alternative working patterns such as; compressed hours (e.g. working a 4 day week/ 9 day fortnight), job shares and annualised hours (agreed number of hours per annum paid monthly i.e. working term-time only). Working hours: Flexibility around your working day (e.g. start time, finish time). Ability to bank hours in a 12 month reference period including the ability to accrue and use 3 days per calendar month. Where you work: Depending on your role, blended working may be available including remote working to suit you and your team. This can be discussed at interview. Annual leave: 25 days pro rata (rising to 30 after 5 years) plus 8 public holidays with the ability to buy/sell 5 additional days per annum. Family: Maternity, adoption or shared parental leave of up to 26 weeks with full pay, an additional 13 weeks statutory pay and a further 13 weeks unpaid Learning and Development: Dstl encourages and supports charterships, accreditations and provides employees access to fully funded apprenticeships up to level 7 (Masters Degree). Dstl will pay for 2 memberships with relevant bodies/institutions. Employees also have access to Civil Service Learning. Facilities: Onsite parking, EV Charging points, restaurants, cafés and gyms.
19/11/2026
Full time
At Dstl, our vision is to have a modern way of working efficiently, accommodating and enabling our people to create, collaborate and deliver. To do this successfully in this job will require attendance at a Dstl location, Government Departments including wider MoD or Delivery and Mission Partner premises for at least 80% of your working time. About the job Job summary Are you passionate about solving complex engineering challenges and shaping the future of cyber and defence capabilities? Dstl is looking for a Senior Systems Engineer to join a multidisciplinary team responsible for transforming cutting-edge research into operational capabilities that support national security and defence objectives. This is an exciting opportunity to work on complex, high-impact programmes, helping to define, design and assure systems that integrate people, process and technology into coherent, effective solutions. Why join us? As a Senior Systems Engineer, you will play a key role in translating complex stakeholder and customer needs into system architectures, requirements and technical solutions. You will work across a diverse range of projects, providing technical leadership, supporting strategic decision-making and ensuring that solutions are safe, secure, robust and fit for purpose. Working alongside scientists, engineers, project managers and external partners, you will apply systems engineering principles to complex cyber and technology challenges. You will help develop architectural models, influence engineering standards and enable effective integration across capabilities, ensuring solutions meet both current operational needs and future requirements. This role offers the opportunity to apply your systems thinking and engineering expertise in a unique environment where innovation, collaboration and technical excellence are critical to delivering capability that makes a real-world difference. This role is eligible for an additional specialist allowance of £2758 annually subject to meeting extended onboarding requirements. The role may be eligible for additional skills allowances depending on the skills and experience of the applicant. Job description What you'll do; Translate complex customer and stakeholder needs into clear system architectures, requirements and engineering solutions. Apply systems engineering and systems thinking approaches to solve challenging technical and operational problems. Provide technical leadership on complex projects, ensuring solutions align with customer, business, safety and security requirements. Develop and maintain architectural models that support informed decision-making, integration and capability development. Support the development, assurance and delivery of cyber and defence capabilities across the system lifecycle. Promote the use of engineering standards, frameworks and open-system approaches to improve interoperability and consistency. Analyse complex technical information and communicate findings through high-quality documentation, reports and presentations. Work collaboratively with internal and external stakeholders to deliver high-quality outcomes across multiple priorities. For more information on the job responsibilities, please see the job profile attached below. Person specification What we're looking for A degree in a STEM discipline such as Systems Engineering, Engineering, Software Engineering, Computer Science, Physics or Mathematics, or equivalent professional experience. An understanding of Systems Engineering and/or Systems Thinking methodologies and their practical application. Knowledge of the development and assurance of complex technical systems or capabilities. An awareness of software engineering and how software integrates with hardware, embedded systems and wider system architectures. Experience solving complex, non-routine technical problems and making evidence-based engineering assessments. Experience applying systems engineering techniques within an engineering, technology or scientific environment. Strong analytical, problem-solving and stakeholder engagement skills. The ability to communicate complex technical information clearly to a range of audiences. Please review the attached job description for more detailed information. Important Information: Our work in defence, security and intelligence requires our employees to be UK Nationals who are able to gain a high level of security clearance to undertake the projects we are involved in to protect us from security threats. For this reason, only UK Nationals will be able to apply for this role. If you are an international or dual-national candidate, and you think you have the skills we need, please consider applying to any of our government, security or defence partners. This role will require Develop Vetting and you should have resided in the UK for the past 10 years. Behaviours We'll assess you against these behaviours during the selection process: Delivering at Pace Communicating and Influencing Working Together Changing and Improving Benefits Alongside your salary of £41,431, Defence Science and Technology Laboratory contributes £12,002 towards you being a member of the Civil Service Defined Benefit Pension scheme. Find out what benefits a Civil Service Pension provides (opens in a new window). Benefits Dstl s full range of great benefits can be found in the information pack which includes: Financial: An excellent pension scheme starting from 26% employer contribution ( find out more here ). In Year Rewarding Achievement bonuses and thank you vouchers. Rental deposit scheme and cycle to work scheme. Allowances: This role is eligible for an additional specialist allowance of £2758 annually subject to meeting extended onboarding requirements. The role may be eligible for additional skills allowances depending on the skills and experience of the applicant. Flexible working : Options include alternative working patterns such as; compressed hours (e.g. working a 4 day week/ 9 day fortnight), job shares and annualised hours (agreed number of hours per annum paid monthly i.e. working term-time only). Working hours: Flexibility around your working day (e.g. start time, finish time). Ability to bank hours in a 12 month reference period including the ability to accrue and use 3 days per calendar month. Where you work: Depending on your role, blended working may be available including remote working to suit you and your team. This can be discussed at interview. Annual leave: 25 days pro rata (rising to 30 after 5 years) plus 8 public holidays with the ability to buy/sell 5 additional days per annum. Family: Maternity, adoption or shared parental leave of up to 26 weeks with full pay, an additional 13 weeks statutory pay and a further 13 weeks unpaid Learning and Development: Dstl encourages and supports charterships, accreditations and provides employees access to fully funded apprenticeships up to level 7 (Masters Degree). Dstl will pay for 2 memberships with relevant bodies/institutions. Employees also have access to Civil Service Learning. Facilities: Onsite parking, EV Charging points, restaurants, cafés and gyms.
At Dstl, our vision is to have a modern way of working efficiently, accommodating and enabling our people to create, collaborate and deliver. To do this successfully in this job will require attendance at a Dstl location, Government Departments including wider MoD or Delivery and Mission Partner premises for at least 80% of your working time. About the job Job summary Are you an experienced cyber security specialist with a passion for reverse engineering, vulnerability research and solving some of the UK's most complex technical challenges? We are seeking a Principal Cyber Vulnerability Researcher to provide technical leadership in the identification, analysis and exploitation of vulnerabilities across software, hardware and embedded systems. Working at the forefront of cyber research, you will lead high-impact investigations that help inform critical operational decisions, influence future capability development and strengthen national security. Why join us? This is a senior technical role where you will apply your expertise in reverse engineering, vulnerability assessment and software analysis to tackle challenging and often ambiguous problems. You will work collaboratively with multidisciplinary teams, customers and partner organisations, providing authoritative technical advice and delivering robust, evidence-based outcomes. Alongside leading technical delivery, you will shape research approaches, develop innovative tools and methodologies, and play a key role in mentoring and developing less experienced engineers and researchers. If you thrive in a highly technical environment, enjoy solving complex problems and want to make a meaningful impact through cutting-edge cyber research, we would like to hear from you. This role is eligible for an additional specialist allowance of £2758 annually subject to meeting extended onboarding requirements. The role may be eligible for additional skills allowances depending on the skills and experience of the applicant. Job description What you'll do Lead complex cyber vulnerability research activities across software, hardware and embedded systems. Conduct software reverse engineering using industry-standard tools and techniques. Identify, assess and exploit software vulnerabilities and security weaknesses. Provide authoritative technical advice and recommendations to a range of technical and non-technical stakeholders. Develop and improve vulnerability research tools, techniques and methodologies. Lead technical investigations and coordinate specialist activities to deliver high-quality outcomes. Produce clear technical reports, assessments and evidence-based recommendations. Work closely with multidisciplinary teams, government customers and external partners. Provide technical leadership, coaching and mentoring to engineers and researchers. Support the growth of organisational capability through knowledge sharing and continuous improvement. Maintain high standards of security, safety and professional conduct in all aspects of work. Person specification What we're looking for Degree in a relevant STEM subject such as Computer Science, Electronic Engineering, Embedded Systems, Physics or Mathematics, or equivalent relevant experience. Technical Knowledge and Skills Strong experience using reverse engineering tools such as Ghidra, IDA Pro or equivalent. Experience conducting static and dynamic software analysis. Knowledge of assembly languages, including x86 and/or ARM. Strong programming capability in C and/or C++. Experience identifying, assessing and exploiting software vulnerabilities. Ability to evaluate complex technical problems and communicate risk-based recommendations effectively. Experience selecting and applying vulnerability research methodologies to new and challenging problems. Ability to provide technical leadership within multidisciplinary teams. Experience Leading complex software reverse engineering and vulnerability research activities. Using advanced analysis tools and techniques to understand software behaviour and identify vulnerabilities. Producing authoritative technical assessments and recommendations. Leading teams to deliver complex technical outcomes. Coaching, mentoring and developing less experienced colleagues. Building strong collaborative relationships across diverse stakeholder groups. Please review the attached job description for more detailed information Important Information: Our work in defence, security and intelligence requires our employees to be UK Nationals who are able to gain a high level of security clearance to undertake the projects we are involved in to protect us from security threats. For this reason, only UK Nationals will be able to apply for this role. If you are an international or dual-national candidate, and you think you have the skills we need, please consider applying to any of our government, security or defence partners. This role will require Develop Vetting and you should have resided in the UK for the past 10 years. Qualifications Relevant STEM-based degree such as Electronic Engineering, Embedded Systems, Computer Science, Physics or Mathematics. Individual with equivalent skills qualifications or experience are also actively encouraged to apply. Behaviours We'll assess you against these behaviours during the selection process: Delivering at Pace Communicating and Influencing Working Together Changing and Improving Leadership Benefits Alongside your salary of £51,568, Defence Science and Technology Laboratory contributes £14,939 towards you being a member of the Civil Service Defined Benefit Pension scheme. Find out what benefits a Civil Service Pension provides (opens in a new window). Benefits Dstl s full range of great benefits can be found in the information pack which includes: Financial: An excellent pension scheme starting from 26% employer contribution ( find out more here ). In Year Rewarding Achievement bonuses and thank you vouchers. Rental deposit scheme and cycle to work scheme. Flexible working : Options include alternative working patterns such as; compressed hours, job shares and annualised hours (agreed number of hours per annum paid monthly i.e. working term-time only). Working hours: Flexibility around your working day (e.g. start time, finish time). Ability to bank hours in a 12 month reference period including the ability to accrue and use 3 days per calendar month. Where you work: This role requires a minimum of 80% on site attendance. Annual leave: 25 days pro rata (rising to 30 after 5 years) plus 8 public holidays with the ability to buy/sell 5 additional days per annum. Family: Maternity, adoption or shared parental leave of up to 26 weeks with full pay, an additional 13 weeks statutory pay and a further 13 weeks unpaid Learning and Development: Dstl encourages and supports charterships, accreditations and provides employees access to fully funded apprenticeships up to level 7 (Masters Degree). Dstl will pay for 2 memberships with relevant bodies/institutions. Employees also have access to Civil Service Learning. Facilities: Onsite parking, EV Charging points, restaurants, cafés and gyms.
19/11/2026
Full time
At Dstl, our vision is to have a modern way of working efficiently, accommodating and enabling our people to create, collaborate and deliver. To do this successfully in this job will require attendance at a Dstl location, Government Departments including wider MoD or Delivery and Mission Partner premises for at least 80% of your working time. About the job Job summary Are you an experienced cyber security specialist with a passion for reverse engineering, vulnerability research and solving some of the UK's most complex technical challenges? We are seeking a Principal Cyber Vulnerability Researcher to provide technical leadership in the identification, analysis and exploitation of vulnerabilities across software, hardware and embedded systems. Working at the forefront of cyber research, you will lead high-impact investigations that help inform critical operational decisions, influence future capability development and strengthen national security. Why join us? This is a senior technical role where you will apply your expertise in reverse engineering, vulnerability assessment and software analysis to tackle challenging and often ambiguous problems. You will work collaboratively with multidisciplinary teams, customers and partner organisations, providing authoritative technical advice and delivering robust, evidence-based outcomes. Alongside leading technical delivery, you will shape research approaches, develop innovative tools and methodologies, and play a key role in mentoring and developing less experienced engineers and researchers. If you thrive in a highly technical environment, enjoy solving complex problems and want to make a meaningful impact through cutting-edge cyber research, we would like to hear from you. This role is eligible for an additional specialist allowance of £2758 annually subject to meeting extended onboarding requirements. The role may be eligible for additional skills allowances depending on the skills and experience of the applicant. Job description What you'll do Lead complex cyber vulnerability research activities across software, hardware and embedded systems. Conduct software reverse engineering using industry-standard tools and techniques. Identify, assess and exploit software vulnerabilities and security weaknesses. Provide authoritative technical advice and recommendations to a range of technical and non-technical stakeholders. Develop and improve vulnerability research tools, techniques and methodologies. Lead technical investigations and coordinate specialist activities to deliver high-quality outcomes. Produce clear technical reports, assessments and evidence-based recommendations. Work closely with multidisciplinary teams, government customers and external partners. Provide technical leadership, coaching and mentoring to engineers and researchers. Support the growth of organisational capability through knowledge sharing and continuous improvement. Maintain high standards of security, safety and professional conduct in all aspects of work. Person specification What we're looking for Degree in a relevant STEM subject such as Computer Science, Electronic Engineering, Embedded Systems, Physics or Mathematics, or equivalent relevant experience. Technical Knowledge and Skills Strong experience using reverse engineering tools such as Ghidra, IDA Pro or equivalent. Experience conducting static and dynamic software analysis. Knowledge of assembly languages, including x86 and/or ARM. Strong programming capability in C and/or C++. Experience identifying, assessing and exploiting software vulnerabilities. Ability to evaluate complex technical problems and communicate risk-based recommendations effectively. Experience selecting and applying vulnerability research methodologies to new and challenging problems. Ability to provide technical leadership within multidisciplinary teams. Experience Leading complex software reverse engineering and vulnerability research activities. Using advanced analysis tools and techniques to understand software behaviour and identify vulnerabilities. Producing authoritative technical assessments and recommendations. Leading teams to deliver complex technical outcomes. Coaching, mentoring and developing less experienced colleagues. Building strong collaborative relationships across diverse stakeholder groups. Please review the attached job description for more detailed information Important Information: Our work in defence, security and intelligence requires our employees to be UK Nationals who are able to gain a high level of security clearance to undertake the projects we are involved in to protect us from security threats. For this reason, only UK Nationals will be able to apply for this role. If you are an international or dual-national candidate, and you think you have the skills we need, please consider applying to any of our government, security or defence partners. This role will require Develop Vetting and you should have resided in the UK for the past 10 years. Qualifications Relevant STEM-based degree such as Electronic Engineering, Embedded Systems, Computer Science, Physics or Mathematics. Individual with equivalent skills qualifications or experience are also actively encouraged to apply. Behaviours We'll assess you against these behaviours during the selection process: Delivering at Pace Communicating and Influencing Working Together Changing and Improving Leadership Benefits Alongside your salary of £51,568, Defence Science and Technology Laboratory contributes £14,939 towards you being a member of the Civil Service Defined Benefit Pension scheme. Find out what benefits a Civil Service Pension provides (opens in a new window). Benefits Dstl s full range of great benefits can be found in the information pack which includes: Financial: An excellent pension scheme starting from 26% employer contribution ( find out more here ). In Year Rewarding Achievement bonuses and thank you vouchers. Rental deposit scheme and cycle to work scheme. Flexible working : Options include alternative working patterns such as; compressed hours, job shares and annualised hours (agreed number of hours per annum paid monthly i.e. working term-time only). Working hours: Flexibility around your working day (e.g. start time, finish time). Ability to bank hours in a 12 month reference period including the ability to accrue and use 3 days per calendar month. Where you work: This role requires a minimum of 80% on site attendance. Annual leave: 25 days pro rata (rising to 30 after 5 years) plus 8 public holidays with the ability to buy/sell 5 additional days per annum. Family: Maternity, adoption or shared parental leave of up to 26 weeks with full pay, an additional 13 weeks statutory pay and a further 13 weeks unpaid Learning and Development: Dstl encourages and supports charterships, accreditations and provides employees access to fully funded apprenticeships up to level 7 (Masters Degree). Dstl will pay for 2 memberships with relevant bodies/institutions. Employees also have access to Civil Service Learning. Facilities: Onsite parking, EV Charging points, restaurants, cafés and gyms.
At Dstl, our vision is to have a modern way of working efficiently, accommodating and enabling our people to create, collaborate and deliver. To do this successfully in this job will require attendance at a Dstl location, Government Departments including wider MoD or Delivery and Mission Partner premises for at least 80% of your working time. About the job Job summary Join Dstl and help develop advanced cyber and electronic capabilities that support the UK's national security interests. As a Senior Cyber Digital Signal Processing (DSP) and Embedded Engineer, you will work on complex and technically challenging projects, designing and delivering innovative signal processing, embedded software and FPGA-based solutions that have a real-world operational impact. Why join us? Working within multidisciplinary teams of engineers, scientists and technical specialists, you'll solve complex problems across software and hardware domains, influence technical direction, and help shape future capabilities. You'll have the opportunity to work with cutting-edge technologies, contribute to mission-critical programmes, and collaborate with partners across government, industry and academia. This role is ideal for engineers who enjoy tackling difficult technical challenges, combining deep technical expertise with practical problem-solving and systems thinking. Alongside delivering innovative solutions, you'll help develop technical capability across the organisation through mentoring, technical leadership and knowledge sharing. You'll be supported to maintain and grow your professional expertise, explore emerging technologies and contribute to the continuous improvement of engineering practices, tools and ways of working. This role is eligible for an additional specialist allowance of £2758 annually subject to meeting extended onboarding requirements. The role may be eligible for additional skills allowances depending on the skills and experience of the applicant. Job description What you'll do; Design, develop and deliver advanced DSP, embedded software and FPGA-based solutions to support complex cyber and defence challenges. Develop and implement high-performance algorithms and real-time signal processing capabilities that improve operational effectiveness and system performance. Shape technical architectures and make significant contributions to software and hardware design decisions. Work across multidisciplinary teams to solve complex engineering problems and deliver technical outcomes to cost, quality and schedule requirements. Translate customer and stakeholder requirements into practical, robust and scalable technical solutions. Produce high-quality technical documentation, provide authoritative technical advice and support technical reviews. Support integration, testing and debugging activities across software and hardware environments. Share knowledge, mentor colleagues and contribute to developing engineering capability within the wider team. Drive continual improvement by identifying opportunities to enhance tools, processes and engineering approaches. Maintain high standards of security, safety and professional engineering practice throughout your work. Person specification What we're looking for; You should have experience in at least two of the following areas: Digital Signal Processing, including filtering, FFTs and real-time signal analysis. Embedded systems development using microcontrollers, RTOS or embedded Linux platforms. C/C++ software development for performance-critical applications. FPGA development using VHDL. Software-hardware integration, debugging and system optimisation. You will also be able to demonstrate: Experience delivering DSP and embedded engineering solutions within a professional engineering, science or technology environment. Strong analytical and problem-solving skills, with the ability to work on complex and non-routine technical challenges. Experience engaging with customers and stakeholders to develop effective technical solutions. Excellent communication and collaboration skills. A relevant STEM degree, or equivalent qualifications and experience. Please review the attached job description for more detailed information Important Information: Our work in defence, security and intelligence requires our employees to be UK Nationals who are able to gain a high level of security clearance to undertake the projects we are involved in to protect us from security threats. For this reason, only UK Nationals will be able to apply for this role. If you are an international or dual-national candidate, and you think you have the skills we need, please consider applying to any of our government, security or defence partners. This role will require Develop Vetting and you should have resided in the UK for the past 10 years. Qualifications Relevant STEM-based degree such as Electronic Engineering, Embedded Systems, Computer Science, Physics or Mathematics. Individual with equivalent skills qualifications or experience are also actively encouraged to apply. Behaviours We'll assess you against these behaviours during the selection process: Delivering at Pace Communicating and Influencing Working Together Changing and Improving Benefits Alongside your salary of £41,431, Defence Science and Technology Laboratory contributes £12,002 towards you being a member of the Civil Service Defined Benefit Pension scheme. Find out what benefits a Civil Service Pension provides (opens in a new window). Benefits Dstl s full range of great benefits can be found in the information pack which includes: Financial: An excellent pension scheme starting from 26% employer contribution ( find out more here ). In Year Rewarding Achievement bonuses and thank you vouchers. Rental deposit scheme and cycle to work scheme. Flexible working : Options include alternative working patterns such as; compressed hours, job shares and annualised hours (agreed number of hours per annum paid monthly i.e. working term-time only). Working hours: Flexibility around your working day (e.g. start time, finish time). Ability to bank hours in a 12 month reference period including the ability to accrue and use 3 days per calendar month. Where you work: This role requires a minimum of 80% on site attendance. Annual leave: 25 days pro rata (rising to 30 after 5 years) plus 8 public holidays with the ability to buy/sell 5 additional days per annum. Family: Maternity, adoption or shared parental leave of up to 26 weeks with full pay, an additional 13 weeks statutory pay and a further 13 weeks unpaid Learning and Development: Dstl encourages and supports charterships, accreditations and provides employees access to fully funded apprenticeships up to level 7 (Masters Degree). Dstl will pay for 2 memberships with relevant bodies/institutions. Employees also have access to Civil Service Learning. Facilities: Onsite parking, EV Charging points, restaurants, cafés and gyms.
19/11/2026
Full time
At Dstl, our vision is to have a modern way of working efficiently, accommodating and enabling our people to create, collaborate and deliver. To do this successfully in this job will require attendance at a Dstl location, Government Departments including wider MoD or Delivery and Mission Partner premises for at least 80% of your working time. About the job Job summary Join Dstl and help develop advanced cyber and electronic capabilities that support the UK's national security interests. As a Senior Cyber Digital Signal Processing (DSP) and Embedded Engineer, you will work on complex and technically challenging projects, designing and delivering innovative signal processing, embedded software and FPGA-based solutions that have a real-world operational impact. Why join us? Working within multidisciplinary teams of engineers, scientists and technical specialists, you'll solve complex problems across software and hardware domains, influence technical direction, and help shape future capabilities. You'll have the opportunity to work with cutting-edge technologies, contribute to mission-critical programmes, and collaborate with partners across government, industry and academia. This role is ideal for engineers who enjoy tackling difficult technical challenges, combining deep technical expertise with practical problem-solving and systems thinking. Alongside delivering innovative solutions, you'll help develop technical capability across the organisation through mentoring, technical leadership and knowledge sharing. You'll be supported to maintain and grow your professional expertise, explore emerging technologies and contribute to the continuous improvement of engineering practices, tools and ways of working. This role is eligible for an additional specialist allowance of £2758 annually subject to meeting extended onboarding requirements. The role may be eligible for additional skills allowances depending on the skills and experience of the applicant. Job description What you'll do; Design, develop and deliver advanced DSP, embedded software and FPGA-based solutions to support complex cyber and defence challenges. Develop and implement high-performance algorithms and real-time signal processing capabilities that improve operational effectiveness and system performance. Shape technical architectures and make significant contributions to software and hardware design decisions. Work across multidisciplinary teams to solve complex engineering problems and deliver technical outcomes to cost, quality and schedule requirements. Translate customer and stakeholder requirements into practical, robust and scalable technical solutions. Produce high-quality technical documentation, provide authoritative technical advice and support technical reviews. Support integration, testing and debugging activities across software and hardware environments. Share knowledge, mentor colleagues and contribute to developing engineering capability within the wider team. Drive continual improvement by identifying opportunities to enhance tools, processes and engineering approaches. Maintain high standards of security, safety and professional engineering practice throughout your work. Person specification What we're looking for; You should have experience in at least two of the following areas: Digital Signal Processing, including filtering, FFTs and real-time signal analysis. Embedded systems development using microcontrollers, RTOS or embedded Linux platforms. C/C++ software development for performance-critical applications. FPGA development using VHDL. Software-hardware integration, debugging and system optimisation. You will also be able to demonstrate: Experience delivering DSP and embedded engineering solutions within a professional engineering, science or technology environment. Strong analytical and problem-solving skills, with the ability to work on complex and non-routine technical challenges. Experience engaging with customers and stakeholders to develop effective technical solutions. Excellent communication and collaboration skills. A relevant STEM degree, or equivalent qualifications and experience. Please review the attached job description for more detailed information Important Information: Our work in defence, security and intelligence requires our employees to be UK Nationals who are able to gain a high level of security clearance to undertake the projects we are involved in to protect us from security threats. For this reason, only UK Nationals will be able to apply for this role. If you are an international or dual-national candidate, and you think you have the skills we need, please consider applying to any of our government, security or defence partners. This role will require Develop Vetting and you should have resided in the UK for the past 10 years. Qualifications Relevant STEM-based degree such as Electronic Engineering, Embedded Systems, Computer Science, Physics or Mathematics. Individual with equivalent skills qualifications or experience are also actively encouraged to apply. Behaviours We'll assess you against these behaviours during the selection process: Delivering at Pace Communicating and Influencing Working Together Changing and Improving Benefits Alongside your salary of £41,431, Defence Science and Technology Laboratory contributes £12,002 towards you being a member of the Civil Service Defined Benefit Pension scheme. Find out what benefits a Civil Service Pension provides (opens in a new window). Benefits Dstl s full range of great benefits can be found in the information pack which includes: Financial: An excellent pension scheme starting from 26% employer contribution ( find out more here ). In Year Rewarding Achievement bonuses and thank you vouchers. Rental deposit scheme and cycle to work scheme. Flexible working : Options include alternative working patterns such as; compressed hours, job shares and annualised hours (agreed number of hours per annum paid monthly i.e. working term-time only). Working hours: Flexibility around your working day (e.g. start time, finish time). Ability to bank hours in a 12 month reference period including the ability to accrue and use 3 days per calendar month. Where you work: This role requires a minimum of 80% on site attendance. Annual leave: 25 days pro rata (rising to 30 after 5 years) plus 8 public holidays with the ability to buy/sell 5 additional days per annum. Family: Maternity, adoption or shared parental leave of up to 26 weeks with full pay, an additional 13 weeks statutory pay and a further 13 weeks unpaid Learning and Development: Dstl encourages and supports charterships, accreditations and provides employees access to fully funded apprenticeships up to level 7 (Masters Degree). Dstl will pay for 2 memberships with relevant bodies/institutions. Employees also have access to Civil Service Learning. Facilities: Onsite parking, EV Charging points, restaurants, cafés and gyms.
Location: Belfast, United Kingdom Thales is a global technology leader with more than 83,000 employees on five continents. With over 7,500 people in the UK, operating across defence, space, aerospace, and digital security, we help build a future we can all trust. Thales supports the security and stability of our nation by providing extraordinary technology to our customers, as well as delivering social value to the UK with our products and services. Thales technology makes it possible for two thirds of planes to take off and land safely. Thales also protects 80% of the world's payment card transactions and is Europe's number one supplier of defence electronics. Beyond that our people have made London's Jubilee and Northern Lines 20% more efficient and have delivered more than 300 air defence radars in 26 countries. We are a leading name in our markets and a diverse, constantly evolving organisation. Join us. We are currently looking to recruit an End User Support Technician to join our team in Belfast. The role will assist the support of the IT infrastructure covering around 2000 users in a multi network environment providing desktop support services. Key Responsibilities and Tasks: Provide desktop support (2nd/3rd Line) to user calls, fed via the UK Service Desk / Activity Controllers to EUS staff. (Includes the resolution of incidents up to Priority One level and handling Service Requests from basic Laptop/desktop builds to entire user IT relocation projects). Build / rebuild and deployment of desktop / laptop machines in line with "Desktop-on-Demand" procedures and build standards using automated tools (SCCM) and manual processes as necessary. Ensure appropriate support is provided within contractual support hours (the minimum hours per week will be 37 - (8hrs Mon to Thu and 5hrs Fri). However, a flexible attitude to work hours is expected and may require evening and weekend work on occasion. The candidate should be available for on-call if required. Incident support and troubleshooting of any reported issues raised by a UK based service desk on behalf of users. Support and deployment of Smartphone's - iPhone and Android. Support and cover a kiosk-based support solution to troubleshoot IT requests at a drop-in centre based in the Belfast sites giving the customer flexibility for the support provided. Qualifications, Experience and Skills: Experience working in an IT support environment working directly with users in face-to-face situations. Ability to diagnose faults and think on their feet to find a solution. Experience with desktop/laptop environments covering Windows 11, Windows 10, Office applications. Skills with engineering and bespoke desktop applications desirable. Ability to interact with users at all levels including senior VIPs. Resilience to challenging feedback and able to show sympathetic but firm and positive responses. Teamwork focus, able to work with teams located at other remote sites as required. Ability to prioritise and action calls in busy user environment and to take on work delegated by central Service Desk Ability to identify and suggest where team and processes could develop and enhance levels of service to users and IS internally A highly flexible attitude is required where the ability to take on tasks and travel to other sites in the region at short notice is needed. Knowledge of the following: Desktop Support experience (Windows 11 / Windows 10), Fault-Finding and Troubleshooting skills, User Administration, Cisco AnyConnect support, SCCM, Bitlocker, VMware Horizon, Active Directory, Software Installation, Laptop / Desktop / Virtual desktop builds Desirable: Automation tools (such as SCCM) Network patching and Cable Tracing Hardware Installation/Troubleshooting iOS / Android / Phone Support Good knowledge of - IP, WINS, DHCP, DNS, Group Policy etc. At Thales, we ensure equal opportunities, pay and working conditions for all. The benefits we offer include private medical insurance, buying or selling annual leave, cycle to work schemes, employee discounts, paid volunteering day, stocks and shares, annual bonus and much more depending on the role. Read more about our benefits here. We are committed to creating a workplace where everyone feels valued for who they are and the unique strengths they bring. Discover more about our programmes, employee networks, wellbeing policies, and inclusive features here. If this role isn't quite right for you, we encourage you to join our talent community where your details will be shared with our recruitment teams for other potential opportunities. Join the Talent Community here. Join Thales in the UK - Innovate with us and shape the future!
19/11/2026
Full time
Location: Belfast, United Kingdom Thales is a global technology leader with more than 83,000 employees on five continents. With over 7,500 people in the UK, operating across defence, space, aerospace, and digital security, we help build a future we can all trust. Thales supports the security and stability of our nation by providing extraordinary technology to our customers, as well as delivering social value to the UK with our products and services. Thales technology makes it possible for two thirds of planes to take off and land safely. Thales also protects 80% of the world's payment card transactions and is Europe's number one supplier of defence electronics. Beyond that our people have made London's Jubilee and Northern Lines 20% more efficient and have delivered more than 300 air defence radars in 26 countries. We are a leading name in our markets and a diverse, constantly evolving organisation. Join us. We are currently looking to recruit an End User Support Technician to join our team in Belfast. The role will assist the support of the IT infrastructure covering around 2000 users in a multi network environment providing desktop support services. Key Responsibilities and Tasks: Provide desktop support (2nd/3rd Line) to user calls, fed via the UK Service Desk / Activity Controllers to EUS staff. (Includes the resolution of incidents up to Priority One level and handling Service Requests from basic Laptop/desktop builds to entire user IT relocation projects). Build / rebuild and deployment of desktop / laptop machines in line with "Desktop-on-Demand" procedures and build standards using automated tools (SCCM) and manual processes as necessary. Ensure appropriate support is provided within contractual support hours (the minimum hours per week will be 37 - (8hrs Mon to Thu and 5hrs Fri). However, a flexible attitude to work hours is expected and may require evening and weekend work on occasion. The candidate should be available for on-call if required. Incident support and troubleshooting of any reported issues raised by a UK based service desk on behalf of users. Support and deployment of Smartphone's - iPhone and Android. Support and cover a kiosk-based support solution to troubleshoot IT requests at a drop-in centre based in the Belfast sites giving the customer flexibility for the support provided. Qualifications, Experience and Skills: Experience working in an IT support environment working directly with users in face-to-face situations. Ability to diagnose faults and think on their feet to find a solution. Experience with desktop/laptop environments covering Windows 11, Windows 10, Office applications. Skills with engineering and bespoke desktop applications desirable. Ability to interact with users at all levels including senior VIPs. Resilience to challenging feedback and able to show sympathetic but firm and positive responses. Teamwork focus, able to work with teams located at other remote sites as required. Ability to prioritise and action calls in busy user environment and to take on work delegated by central Service Desk Ability to identify and suggest where team and processes could develop and enhance levels of service to users and IS internally A highly flexible attitude is required where the ability to take on tasks and travel to other sites in the region at short notice is needed. Knowledge of the following: Desktop Support experience (Windows 11 / Windows 10), Fault-Finding and Troubleshooting skills, User Administration, Cisco AnyConnect support, SCCM, Bitlocker, VMware Horizon, Active Directory, Software Installation, Laptop / Desktop / Virtual desktop builds Desirable: Automation tools (such as SCCM) Network patching and Cable Tracing Hardware Installation/Troubleshooting iOS / Android / Phone Support Good knowledge of - IP, WINS, DHCP, DNS, Group Policy etc. At Thales, we ensure equal opportunities, pay and working conditions for all. The benefits we offer include private medical insurance, buying or selling annual leave, cycle to work schemes, employee discounts, paid volunteering day, stocks and shares, annual bonus and much more depending on the role. Read more about our benefits here. We are committed to creating a workplace where everyone feels valued for who they are and the unique strengths they bring. Discover more about our programmes, employee networks, wellbeing policies, and inclusive features here. If this role isn't quite right for you, we encourage you to join our talent community where your details will be shared with our recruitment teams for other potential opportunities. Join the Talent Community here. Join Thales in the UK - Innovate with us and shape the future!