66 jobs found

Your Impact You will be working on sophisticated, industrial, real time systems involving embedded hardware and software platforms, automated validation, and simulation of field conditions. This team of engineers develops innovative monitoring systems used for Grid Monitoring, Gas Insulated Switchgear (GIS), and Generation applications in electrical substations and power plants. Validation and verification of embedded systems incorporating processors, microcontrollers, Linux based platforms, and analog/digital I/O subsystems. Design, development, and execution of test plans for hardware components integrated with firmware and software. Development of automated test tools, test frameworks, and simulation environments for hardware in the loop (HIL) and system level testing. Execution of integration testing across hardware, firmware, networking, and application software layers. Support for regulatory and compliance testing activities, including CE, UL, IEC, IEEE, EMC, and environmental verification. Investigation and root cause analysis of complex system issues using electrical test equipment, protocol analysis tools, network monitoring tools, and system logs. Collaboration with hardware, firmware, software, and systems engineering teams to ensure robust product validation and long term reliability. Use of Agile Scrum methodologies to support validation activities, continuous improvement, and product quality initiatives. Qualifications Bachelor's or Master's degree in Electrical Engineering, Electronic Engineering, Computer Engineering, or equivalent. Industry experience, including at least three years in embedded systems validation, hardware verification, or test automation within a laboratory or production environment. Strong understanding of embedded systems, digital and analogue electronics, and electrical engineering principles. Experience developing automated test solutions using scripting or programming languages such as Python, C#, LabVIEW, or similar. Ability to work independently, manage multiple priorities, and drive high performance validation strategies. Strong analytical, troubleshooting, interpersonal, and technical communication skills. Preferred Skills Experience with cabinet wiring, electrical safety, circuit protection, and industrial control systems. Hands on experience using oscilloscopes, digital multimeters (DMMs), signal generators, and other laboratory instrumentation for verification and validation activities. Experience with networking equipment, managed Ethernet switches, GPS, PTP, NTP, or other precision timing technologies. Experience troubleshooting network communications using packet capture and analysis tools such as Wireshark. Experience with industrial communication protocols including IEC 61850, DNP3, Modbus, and related testing methodologies. Experience developing automated test harnesses, regression test systems, and hardware in the loop (HIL) test environments. Familiarity with protocol testing tools such as IEC Browser, IED Scout, Modbus Poll, and Modbus Slave. Exposure to fault location, digital fault recording (DFR), power quality (PQ), synchrophasor (PMU), condition monitoring, or other grid power system applications. Experience with Linux based embedded platforms and use of version control tools such as Git. Knowledge of serial communication interfaces including UART, SPI, I C, CAN, or RS 485. Exposure to cybersecurity testing, vulnerability assessment, secure communications protocols, or IEC 62443 requirements would be advantageous. We Are an Equal Opportunity Employer. Ralliant Corporation and all Ralliant Companies are proud to be equal opportunity employers. We value and encourage diversity and solicit applications from all qualified applicants without regard to race, color, national origin, religion, sex, age, marital status, disability, veteran status, sexual orientation, gender identity or expression, or other characteristics protected by law. Ralliant and all Ralliant Companies are also committed to providing reasonable accommodations for applicants with disabilities. Individuals who need a reasonable accommodation because of a disability for any part of the employment application process, please contact us at .

Role Overview We are looking for a Sporting Systems Technician to join our Track Systems team. Reporting into our Engineering Manager - Sporting Systems, this role will support the installation, deployment and management of the F1 timing data acquisition and communications system at F1 race locations. Responsibilities Competently install timing loops, beacons and track temperature sensors into the surface of the track. Perform manual work including digging, soldering and operation of machinery and tools, while complying with health and safety training. Work safely at all times in accordance with company and location specific health and safety requirements. Install, test and terminate coaxial cable and multi core twisted pair data cable used for loop and decoder data communications. Test and verify correct function of all timing data acquisition equipment and related hardware. Fault find basic IT networks and cable systems. Compile and publish reports for the department. Work outdoors in a variety of global destinations. Ensure department and company tools and equipment are correctly used, maintained and transported between races. Read, comprehend and work to the F1 Circuit Drawings to achieve the correct equipment setup for a race. Configure and monitor incoming and outgoing data using F1 software to ensure correct function of company systems. Report issues to the F100 team and associated clients. Mark loop IDs on track with spray paint and install beacon fittings in track and pit lane. Mark front axle points for pit stop boxes in pit lane. Configure and deploy timing decoders, pit lane nodes and workshop furniture. Perform basic data analysis to identify trends and faults. Load and unload work equipment safely. Qualities & Qualifications Well presented, organised and positive can do attitude. Strong team working ability and capable of working outdoors in hot and cold weather. Willingness to travel on a regular basis for extended periods (1 to 3 weeks). Keen interest in technical subjects related to the job and willingness to learn new skills. Excellent communicator with ability to express oneself accurately and concisely. Good time management skills. Fault finding experience on electrical/electronic wiring systems. Experience reading and working to wiring diagrams and technical drawings. Desirable: knowledge of IP addressing and TCP/IP communications. Desirable: previous experience in a similar environment such as electronics or network IT. Qualifications in Motorsport Engineering with an electrical/electronic bias. Career progression to Senior Sporting Systems Technician. Benefits Private Healthcare scheme. Dental Care. 4 GrandPrix Paddock passes per season. Enhanced maternity/paternity leave and other family planning policies. Free staff shuttle service to and from surrounding train stations near Biggin Hill. Free healthy snacks in our offices. Subsidised canteen in Biggin Hill, serving breakfast and lunch. 25days annual leave and 8 Bank Holiday days, plus a Christmas period closure. Opportunities to develop and request training via our in house Learning and Development team. Discount on F1 merchandise. Discount at F1's experiences including F1 Arcade and F1 Drive. Perkbox benefit portal and more. Recruitment Fraud Warning We only communicate with candidates through email addresses. We will never contact you via personal email accounts, messaging apps, or request payment as part of our recruitment process. If you receive suspicious communication claiming to be from our talent team, please report it to .

Senior Missions Systems Engineer Department: Systems Employment Type: Permanent - Full Time Location: Gamston Airport, Retford Reporting To: Jez Staples Description DEA is looking for a Senior Mission Systems Engineer to serve as a technical focal point for our Mission Systems department. This role is designed for a leader who excels at translating complex mission requirements into functional, model-based architectures while maintaining a "hands on" understanding of electronics and system builds. Responsible for leading the adoption of Model-Based Systems Engineering (MBSE) and assisting the Mission Systems Operations Manager and their deputy with the management of a multidisciplinary team to deliver robust, high reliability hardware and software systems. This coupled with maintaining the operational tempo of the current Mission Systems deployed on ISR contracts. Key Responsibilities Providing diagnostics and first line maintenance on a variety of airborne radar, electro optic and radio frequency sensors, mission computers, datalinks (SATCOM and line of sight), onboard operator consoles and ground stations Lead MBSE Implementation: Drive the transition from traditional document based engineering to a model centric environment. Owning the system model (SysML) and ensuring it serves as the "single source of truth" for the entire project lifecycle. Team Leadership & Management: Lead a team of Mission Systems Engineers, Technicians and Designers. Responsible for assisting career development, project resourcing, and maintaining a high standard of technical excellence across the team. System Lifecycle Management: Oversee the full "V-model" lifecycle, from initial concept and requirements derivation to system integration, verification, and validation (V&V). Electronics Oversight: Provide technical guidance on electronic hardware development, ensuring that system level requirements for power, thermal management, and signal integrity are met at the board and chassis level. Standardisation & Architecture: While maintaining a generic systems approach ensure designs remain modular and scalable, utilising industry standards such as VPX where high performance ruggedized computing is required. Management of a Systems Integration Lab that replicates the aircraft environment for testing new equipment, training operators and troubleshooting potential defects. Day to day liaison with key stakeholders including Flight Operations ,Task Specialists, Engineering (Part 145) and Intelligence Analysts. Skills, Knowledge & Expertise MBSE Proficiency: Expert knowledge of SysML and experience with tools such as MatLab or similar. Electronics Foundation: Solid understanding of digital and analog circuit design, power distribution, and electronic packaging. Open Systems Knowledge: Familiarity with VPX architecture (VITA standards) for modular system design and backplane communication. Requirements Engineering: Managing complex requirements and taking concepts through the 'V' lifecycle whilst maintaining traceability and compliance to successful integration. Technical Communication: The ability to distill complex technical trade offs for executive leadership and non technical clients. Problem Solving: A proven track record of resolving "system of systems" level issues that cross the boundaries of hardware, software, and firmware. Flexibility: Ability to work in a fast paced engineering environment, effective under pressure and adept at prioritising tasks whilst managing competing demands; whilst maintaining exceptional attention to detail. Communication: The ability to communicate clearly and concisely at all levels. Develops and maintains strong relationships with both internal and external stakeholders to achieve business objectives Standards: Demonstrates a strong personal commitment to health, safety, and environmental procedures, ensuring their consistent implementation and adherence. Essential Bachelor's or Master's degree in Systems Engineering, Electrical/Electronic Engineering/related field or 5+ years of total experience in a systems engineering environment, with a clear progression into leadership. Preferred INCOSE CSEP/ESEP or OCSMP (OMG Certified Systems Modeling Professional) is highly desirable. Management Experience: Minimum of 5 years experience managing engineering teams, including performance management and budget oversight. Strategic Planning: Ability to align technical roadmaps with broader business objectives. CAA/EASA Part 145 knowledge and experience Job Benefits 4% Company pension contribution matching Octopus EV Leasing Cycle to Work Bupa Healthcare Perkbox Discount Platform

At CesiumAstro, we are developers and pioneers of out of the box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward thinking individuals to join our team. We are looking to add a Principal Hardware Engineer I to our team. If you are great at what you do, enjoy working in a startup environment, and are passionate about developing leading edge electronics for satellites, spacecraft, and aerospace systems, we would like to hear from you. At the Principal level, you will be tasked with full stack hardware development for complex modules and hardware systems. You will have the opportunity to start at concept development and progress through detailed design, analysis, layout, build, test, and delivery, doing hands on work at each phase. The Principal level also includes technical leadership opportunities, gaining responsibility for critical designs and teams of engineers developing new products and systems. At a small company and a startup, your work will make direct contributions to the success of the business. The work is challenging and impactful, requiring both breadth and depth of technical knowledge. Our products are made for high reliability space and airborne applications, so designs require high levels of technical rigor while maintaining the agility of a startup environment. The successful candidate will also present engineering design review materials to our customers and executive team. As such, excellent written and verbal communication skills are required. JOB DUTIES AND RESPONSIBILITIES Own end to end design of complex electronics modules and systems, from concept and architecture through schematic, layout, test, and production. Products may include high speed digital, power electronics, and/or RF. Lead teams of hardware engineers to develop new products with multiple electronics modules. Provide subject matter expertise in support of hardware development across the company. Develop hardware architecture and write hardware requirements for systems of high complexity. Perform detailed and complete schematic design for complex boards, ranging from key components to supporting passives. Perform detailed PCB layout in Altium Designer for complex boards, often working with a PCB Drafter. Complete analysis such as worst case circuit analysis, signal integrity analysis, and power integrity analysis. Guide analysis methodology. Develop bring up plans and design verification plans for new hardware and complex systems. Perform bring up and key verification testing of modules and complex integrated systems, often working with a team to complete validation. Release modules and assemblies to production, working with the Manufacturing and Test Engineering teams. Mentor junior and senior engineers to build technical understanding and professional development. Use strong working knowledge of adjacent fields, such as software and mechanical, to streamline development of complex hardware systems. JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS Bachelor of Science (BS) degree or higher in Electrical Engineering from an accredited university. Minimum of 9 years of industry or university research experience in board level electronics design, analysis, and test. Direct experience designing high reliability electronics and small systems for space or defense applications, including part derating, worst case analysis, and thermal constraints. Experience owning the design phase of complex board level electronics and small hardware systems, including architecture design, trade studies, key part selection, and detailed design. Multiple experiences delivering hardware products through production and deployment. Expertise in PCB layout and manufacturing, including high density interconnect (HDI) stackup design, IPC standards, and industry best practices. Expertise derisking designs with board level signal integrity and/or power integrity simulation tools such as Ansys SIwave, ADS SIPro, or Mentor Hyperlynx. Strong understanding of adjacent fields, such as software and mechanical, that contributes to judicious design of hardware system architectures. Expert level proficiency in electronics design tools such as Altium. Extensive lab experience for bring up and verification of new hardware, based on in depth understanding of specialized lab equipment. Excellent written and spoken communication skills. PREFERRED EXPERIENCE Experience leading teams of hardware engineers to develop multi module assemblies, including hardware architecture, requirements, and interconnects. Design for space radiation environments.

At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Senior Hardware Engineer II to our team. If you are great at what you do, enjoy working in a startup environment, and are passionate about developing leading-edge electronics for satellites, spacecraft, and aerospace systems, we would like to hear from you. At the Principal level, you will be tasked with full-stack hardware development for complex modules and hardware systems. You will have the opportunity to start at concept development and progress through detailed design, analysis, layout, build, test, and delivery, doing hands on work at each phase. The Principal level also includes technical leadership opportunities, gaining responsibility for critical designs and teams of engineers developing new products and systems. At a small company and a startup, your work will make direct contributions to the success of the business. The work is challenging and impactful, requiring both breadth and depth of technical knowledge. Our products are made for high reliability space and airborne applications, so designs require high levels of technical rigor while maintaining the agility of a startup environment. The successful candidate will also present engineering design review materials to our customers and executive team. As such, excellent written and verbal communication skills are required. JOB DUTIES AND RESPONSIBILITIES Own end to end design of complex electronics modules and systems, from concept and architecture through schematic, layout, test, and production. Products may include high speed digital, power electronics, and/or RF. Lead teams of hardware engineers to develop new products with multiple electronics modules. Provide subject matter expertise in support of hardware development across the company. Develop hardware architecture and write hardware requirements for systems of high complexity. Perform detailed and complete schematic design for complex boards, ranging from key components to supporting passives. Perform detailed PCB layout in Altium Designer for complex boards, often working with a PCB Drafter. Complete analysis such as worst case circuit analysis, signal integrity analysis, and power integrity analysis. Guide analysis methodology. Develop bring up plans and design verification plans for new hardware and complex systems. Perform bring up and key verification testing of modules and complex integrated systems, often working with a team to complete validation. Release modules and assemblies to production, working with the Manufacturing and Test Engineering teams. Mentor junior and senior engineers to build technical understanding and professional development. Use strong working knowledge of adjacent fields, such as software and mechanical, to streamline development of complex hardware systems. JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS Bachelor of Science (BS) degree or higher in Electrical Engineering from an accredited university. Minimum of 6 years of industry or university research experience in board level electronics design, analysis, and test. Direct experience designing high reliability electronics and small systems for space or defense applications, including part derating, worst case analysis, and thermal constraints. Experience owning the design phase of complex board level electronics and small hardware systems, including architecture design, trade studies, key part selection, and detailed design. Multiple experiences delivering hardware products through production and deployment. Expertise in PCB layout and manufacturing, including high density interconnect (HDI) stackup design, IPC standards, and industry best practices. Expertise derisking designs with board level signal integrity and/or power integrity simulation tools such as Ansys SIwave, ADS SIPro, or Mentor Hyperlynx. Strong understanding of adjacent fields, such as software and mechanical, that contributes to judicious design of hardware system architectures. Expert level proficiency in electronics design tools such as Altium. Extensive lab experience for bring up and verification of new hardware, based on in depth understanding of specialized lab equipment. Excellent written and spoken communication skills. PREFERRED EXPERIENCE Experience leading teams of hardware engineers to develop multi module assemblies, including hardware architecture, requirements, and interconnects. Design for space radiation environments. CesiumAstro considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. Please be aware that many roles will be subject to both security and export control restrictions. These restrictions mean that factors including new starter's nationality, any previous or dual nationalities held, place of birth and country of residence may limit those roles that you can perform for the organisation. Please note: CesiumAstro does not accept unsolicited resumes from contract agencies or search firms. Any unsolicited resumes submitted to our website or to CesiumAstro team members not through our approved vendor list or Talent Acquisition will be considered property of CesiumAstro, and we will not be obligated to pay any referral fees.

# Battery Management Systems SpecialistUKCompetitiveApply / Discuss This RoleRegister for Similar RolesWe are seeking an experienced Battery Management Systems Specialist to take a senior technical role in the development of advanced BMS hardware for lithium-ion battery applications. You will provide technical leadership across multiple engineering programmes, driving best practice in hardware design, functional safety and reliability. The role offers involvement across the full hardware development lifecycle, from concept architecture and schematic capture through PCB design, verification and industrialisation. Key Responsibilities Leading the development of Battery Management System hardware from concept through production release. Producing and reviewing schematics and multilayer PCB designs for safety-critical BMS applications. Integrating battery monitoring ICs from leading semiconductor manufacturers into BMS hardware designs. Defining and implementing hardware architectures that meet functional safety requirements. Supporting hardware verification, validation, root cause analysis and technical investigations. Driving best practice in hardware functional safety, reliability engineering and DFMEA activities. Collaborating closely with software, systems, controls, mechanical and electrical engineering teams throughout development. Supporting customer workshops, feasibility studies, technical proposals and technology planning activities. Evaluating emerging semiconductor technologies, battery monitoring devices and hardware design methodologies. Developing engineering standards, design guidelines and technical documentation. Working with external suppliers and manufacturing partners to ensure successful product industrialisation. Essential Requirements Degree in Electronics Engineering or a closely related discipline. Significant experience developing Battery Management System hardware for lithium-ion battery applications. Strong knowledge of battery monitoring ICs and integration of devices from leading semiconductor manufacturers. Experience producing and reviewing schematics and multilayer PCB designs for safety-critical products. Hands-on experience with laboratory debugging, fault finding and electronic test equipment. Knowledge of circuit simulation and electronic verification techniques. Experience supporting structured engineering development processes and functional safety activities. Proven ability to provide technical leadership across multiple engineering programmes. Desirable Energy Storage Systems development within Industrial Electrification, e-mobility or Defence industries. Functional Safety (ISO 26262, IEC 61508 or equivalent). UN ECE R100 or related battery regulations. Traction battery systems experience. High-voltage development and test environments. FPGA-based hardware integration. Advanced diagnostics or fault monitoring architectures. Technical roadmap development and R&D activities. Interested in this role?Contact Rick directly to discuss this opportunity or register your CV for similar roles.Book a Call with RickEmail Us Role SummaryJob Type: PermanentLocation: UKSalary: CompetitiveSector: AutomotivePosted: July 2026

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job details Job Title - Senior Test Engineer Job Location - Brighton, UK Our Brighton business is moving to a new location in 2027 and will be within a 15-minute drive of our current site. Job ID - 40530 About this opportunity and L3Harris UK Operating at 11 sites in the United Kingdom, L3Harris supports Britain's mission to secure and strengthen the country by delivering sovereign innovation across the space, air, land, sea and cyber domains. L3Harris in Brighton are part of our Release Systems & Antennas division operating in the Aerospace domain. For over 70 years, L3Harris has designed and developed industry-leading carriage and release systems for fighter, rotary-wing and unmanned platforms and we design, manufacture and test a large portion of our release systems portfolio in our Brighton facility which offers 48,500 square feet of manufacturing space. Our mission-critical release systems equipment is on most major airborne fighter platforms worldwide, including the F-35, along with other aircraft like the Gripen and Typhoon. Please note, our Brighton business is moving to a new location in 2027 and will be within a 15-minute drive of our current site. As this is a senior role the expectation will be to guide, mentor and lead less experienced Engineers to achieve efficient completion of tasks and on time delivery. At this level the role will involve contributing to higher level project scheduling as well as developing very detailed schedules and plans to ensure on time delivery of test results. Although Safety is everyone's responsibility at this level guidance and instruction to less experienced team members will be expected. In a development environment design assurance testing is critical. This will involve creating test hardware and fixtures to test components and sub systems under accelerated test conditions. Benefits Half day finish on a Friday 25 days holiday per year (plus bank holidays), increasing with long service and with the opportunity to buy/sell up to 5 days Private medical insurance with optional family cover Pension scheme of up to 8% employer contribution Life Assurance 4x salary (flexible up to 10x) Group income protection Flexible opt-in extras such as a health care cash plan, dental insurance, gym membership, critical illness cover, cycle to work scheme, travel insurance and electric car scheme Employee Family Assistance Program providing mental health and wellbeing support Professional membership reimbursement (discretionary) Role responsibilities The responsibilities of your role will include the following: Create Type Approval Test Plans to satisfy the certification requirements of Customer Specification and related standards (usually distilled from verification compliance matrix). Develop detailed Qualification Test procedures. Conduct the required tests and prepare Qualification Test Reports to support Airworthiness Certification (DDP/Certificate of Design). Support Internal and Customer Design reviews throughout the Development Life Cycle Provide analysis of the test results. Support for trade studies. Verification of interface control documents, compatibility of physical and functional interfaces and first article production integration. Investigate and implement solutions to products, process or test problems. Analysis of requirements for integration and/or testability. Develop and implement both hardware and software system level test programmes. Designing, developing and implementing cost effective procedures for testing and troubleshooting subassemblies, assemblies and systems. Enhancing and developing test facilities and capabilities. What you'll bring The role requires the following experience and skills: Test system design and implementation Test fixture design Electro-mechanical test High pressure pneumatics (400 bar) derived from bottled inert gas, compressors and boost pumps LabVIEW software and data acquisition (DAQ) equipment Sensors - accelerometers, load cells, pressure transducers, LVDT High Speed Cameras Hoists & lifting equipment (2000kg) Environmental testing: Temperature, Humidity, Vibration Diagnosis of faults/issues Feedback of test results into design process Standard laboratory test equipment (multimeters, verniers) Desirable Automated test cell design/creation Hydraulic and electrical actuators Electrical/electronic design Vibration Rigs (LDS V8900) Diadem - data analysis Environmental testing: Sand/Dust, Salt Fog, EMC/EMI, ESS CAD (Solidworks) Reliability & FMECA MIL-STD 810 & DEF STAN 00-35 Education / Training / Qualifications Hons degree in mech Eng. And 5+ years' experience in related industry Competencies Analytical, methodical, organised Communication and credibility Attention to detail IT proficient Team Player Calm under pressure Important to know Due to the nature of our work many our roles require a UK nationality and the ability to obtain a security clearance. Applicants who accept a conditional offer of employment must meet the requirement of right to work in the UK and must meet eligibility requirements for access to classified information and will be subject to government security checks. Note: This description avoids non-essential promotional content and focuses on responsibilities, qualifications and terms of employment. Equal Opportunity Employer statement: L3Harris Technologies is proud to be an Equal Opportunity Employer. We are committed to maintaining a workplace that is free from unlawful discrimination and offers equal opportunities for all. Applications from individuals are encouraged regardless of age, disability, sex, gender identity, sexual orientation, pregnancy and maternity, race, religion or belief, and marriage and civil partnerships.

World Class Defence Organisation is currently looking to recruit an Electrical Systems Engineer / Architect subcontractor on an initial 12 month contract. Your base site can either be from the companies Bristol, Stevenage or Bolton office. This role will be a hybrid position - 3 days per week onsite and 2 days remote. Hourly Rate: £60 - £85 (Umbrella). Contract Duration: 6 Months initially and then ongoing and long-term thereafter. Missile Electronic Architect Job Description Electrical Architects/Engineers are involved in all aspects of missile development, from the early concept studies to series production and in-service support. It's an excellent opportunity for someone wanting to build on their engineering experience. Responsibilities Specifying/determining system electrical requirements interface definitions and characteristics between subsystems/equipment power architecture, including power budget and power profiles data communication and processing architecture requirements for EMC, bonding, grounding and screening signal safety, including routing of safety related signals Supporting test and fault-finding activities during compatibility checks, risk reduction, system proving/qualification and integration Reviewing and authoring reports, guidelines and processes Design assessments and analysis Working to defence/industry standards Attending and supporting design reviews Equipment Manager (RMO) Responsibilities Project manage the equipment(s) on behalf of the project during development, qualification and manufacture Own the requirements on behalf of the project for the equipment(s) Produce Statement(s) of Work for the associated design authority for the equipment(s) Create and update plans showing activities for the equipment(s) Manage internal & external design authorities for delivery of the equipment(s) hardware, software and deliverables to schedule, cost, quality and performance Hold regular progress reviews with the design authority for the equipment(s) Review qualification verification evidence Track and find resolution to equipment non-compliances Attend and support design reviews Skillset/experience required electrical/electronics interface definitions knowledge of defence/industry standards, etc. degree level qualification in a related subject systems engineering writing reports Additional areas of interest defence weapon systems power supplies actuators data communication sensors EMC Health Usage Monitoring Systems (HUMS) Model Based Engineering (MBE)

Overview Pearson Engineering Ltd is a world leading provider of counter-mine and combat engineering equipment. Our product range is wide and varied, including complex attachments for armoured vehicles and remote-controlled mine clearance systems. The company is positioned to lead in Autonomous Combat Engineering Systems. An ambitious R&D programme investing circa £3m over the next three years will build a centre of excellence for world-class robotics engineering in the North East of England. Job purpose Pearson Engineering is seeking a talented Software Solutions Architect. You will work with colleagues across our R&D and Engineering teams to shape end-to-end software architecture and CI/CD processes for our current and future Remote and Autonomous Systems. You will balance innovation, business goals and technical feasibility, and lead the design of scalable, maintainable and secure software architecture, ensuring compliance with defence industry standards. You will be responsible for the software architecture and CI/CD process covering: Control of Robotic and Autonomous payloads and equipment Vehicle automation Computer vision and image processing Sensor integration Digital twin integration Simulation development Algorithm testing and data analysis Safety systems You will have the opportunity to meet and build relationships with global end-users and partners. You will spend time working with them to trial and optimise solutions for use in real world environments, including validation and verification for real world operations. The role will involve working from early conceptual stages through to final release. Responsibilities Lead technical aspects of defining and developing Software Architecture and CI/CD process for Pearson Engineering Remote and Autonomous Systems products and solutions. Implement software system level architecture as a key enabler for current and future scalable, maintainable and secure software defined solutions. Ensure governance and compliance objectives are set and achieved, including defence industry and security standards. Write clean, maintainable, and scalable code, utilising modern software engineering practices and tools. Contribute significantly to the engineering lifecycle, including scoping, design, implementation, testing, deployment and maintenance of software systems. Collaborate with cross-functional teams to integrate software systems with physical systems and products. Facilitate integration of all software components into a fully functional software system. Participate in design reviews providing software technical input through the development process. Coach team members to improve capabilities and develop their software systems knowledge and expertise. Troubleshoot and resolve complex software technical issues. Stay informed on current trends in software development and Remote and Autonomous Systems; proactively explore their implementation within the company. Skills and experience A degree in Software Engineering or Computer Science, with a grade of at least a 2:1 or an equivalent qualification and experience. Proven experience of software system level design and implementation for scalable, maintainable and secure systems. Proven experience of implementing CI/CD processes for safety-critical software systems. Proven experience in a relevant industry developing software architecture for integration with physical hardware (e.g., complex robotics and control systems). Experience with Linux and developing real-time software in C/C++ or Python. Understanding of electronics and the ability to read electrical schematics. Demonstrable knowledge and experience of current software engineering practices for Remote and Autonomous Systems. Experience with ROS/ROS2, machine learning and OpenCV is advantageous. Experience of robotics, machine control systems and automation is desirable. Knowledge of CODESYS or similar PLC software is beneficial. Experience working in a multi-disciplined engineering team. Ability to investigate and interpret data, issues, and situations to make sound decisions in high-stress situations. Appetite for learning new technologies and applications. Ability to communicate complex processes and procedures to colleagues. Self-motivating, proactive and results-driven approach. Collaborative ethos is essential. Personal attributes and other requirements As a defence contractor, there are security obligations that require staff to achieve the relevant security clearances. You will be expected to support in-house training programmes, as required. Working conditions Mainly office based with visits to external customers (both UK and overseas) from time to time. Working conditions on customer sites may include hours outside normal business hours and inclement field conditions. Reduced working hours on a Friday.

World Class Defence Organisation is currently looking to recruit an Electrical Systems Engineer / Architect subcontractor on an initial 12 month contract. Your base site can either be from the companies Bristol, Stevenage or Bolton office. This role will be a hybrid position - 3 days per week onsite and 2 days remote. Hourly Rate: - £85 (Umbrella). Contract Duration: 6 Months initially and then ongoing and long-term thereafter. Missile Electronic Architect Job Description: Electrical Architects/Engineers are involved in all aspects of missile development, from the early concept studies to series production and in-service support. It's an excellent opportunity for someone wanting to build on their engineering experience. Responsibilities: Specifying/determining system electrical requirements interface definitions and characteristics between subsystems/equipment power architecture, including power budget and power profiles data communication and processing architecture requirements for EMC, bonding, grounding and screening signal safety, including routing of safety related signals Supporting test and fault-finding activities during compatibility checks, risk reduction, system proving/qualification and integration Reviewing and authoring reports, guidelines and processes Design assessments and analysis Working to defence/industry standards Attending and supporting design reviews Alternatively, acting as the Equipment Manager (RMO) for specific electrical/electronic equipment(s) that are part of a missile or launcher system you will: Project manage the equipment(s) on behalf of the project during development, qualification and manufacture Own the requirements on behalf of the project for the equipment(s) Produce Statement(s) of Work for the associated design authority for the equipment(s) Create and update plans showing activities for the equipment(s) Manage internal & external design authorities for delivery of the equipment(s) hardware, software and deliverables to schedule, cost, quality and performance Hold regular progress reviews with the design authority for the equipment(s) Review qualification verification evidence Track and find resolution to equipment non-compliances Attend and support design reviews Skillset/experience required: Technical experience required: electrical/electronics interface definitions knowledge of defence/industry standards, etc. degree level qualification in a related subject systems engineering writing reports Ideally this would be within a defence related background, however, experience within other engineering industries will also be considered. Experience within these other areas are also of interest but not essential: defence weapon systems power supplies actuators data communication sensors EMC Health Usage Monitoring Systems (HUMS) Model Based Engineering (MBE)

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title - ATE Test Engineer Job Location - Farnborough, UK Job ID - 41089 About this opportunity and L3Harris UK Operating at 11 sites in the United Kingdom, L3Harris supports Britain's mission to secure and strengthen the country by delivering sovereign innovation across the space, air, land, sea and cyber domains. L3Harris in Farnborough specialises in secure ground and airborne communication and network systems for the military, international forces and commercial customers. We engineer and maintain night vision goggles, radar systems and tactical radios. The L3Harris Falcon family of radios delivers network-centric communications for superior command and control, real-time voice, data, full motion HD video and crossbanding for mission critical communications in a single, integrated platform. Notably, we are the proud designer, supplier and maintainer of the 50,000 tactical radios in the Bowman tactical C4I system in service with the UK Armed Forces and are working to define and deliver the next generation system, Morpheus. A few of our employee benefits are: 25 days holiday per year (plus bank holidays), increasing with long service and with the opportunity to buy/sell up to 5 days Private medical insurance with optional family cover Pension scheme of up to 8% employer contribution Life Assurance 4x salary (flexible up to 10x) Group income protection Flexible opt in extras such as a health care cash plan, dental insurance, gym membership, critical illness cover, cycle to work scheme, travel insurance and electric car scheme Employee Family Assistance Program providing mental health and wellbeing support Professional membership reimbursement (discretionary) What the role will involve The responsibilities of your role will include the following: Resolution of ATE related faults will require knowledge of the interaction between the ATE and the product under test. Involving issues with hardware, software and RF test. Support Manufacturing Technicians with all ATE related faults/issues. Assist with the development and modernisation of the ATE to address obsolescence and improve reliability and performance. Liaise with Design Engineering to resolve complex ATE related faults to maintain production test output. Re commission of Automation Test Equipment following the swap out of Test Equipment or following repair, including the validation of product test results. Assist on cost reduction and records to identify problem areas in test. Support Operations Test Engineering regarding the repair and maintenance of our mature Automated Test Equipment (ATE), involving detailed troubleshoot analysis and establishing root cause. What you'll bring The role requires the following experience and skills: Prior related experience as an ATE Test Engineer HNC or First degree in Electrical or Electronic Engineering - or equivalent experience. A good understanding of systems engineering principles and development lifecycles including requirements, integration, validation and verification activities. Excellent IT skills with some experience of VB6 programming and LabView or other software languages. Excellent RF Test Systems diagnostic skills. Experience of test data and trend analysis in a production environment. Experience of SQL language. Important to know Due to the nature of our work many our roles require a UK nationality and the ability to obtain a security clearance. Applicants who accept a conditional offer of employment must meet the requirement of right to work in the UK and must meet eligibility requirements for access to classified information and will be subject to government security checks. L3Harris Technologies is proud to be an Equal Opportunity Employer. We are committed to maintaining a workplace that is free from unlawful discrimination and offers equal opportunities for all. Applications from individuals are encouraged regardless of age, disability, sex, gender reassignment, sexual orientation, pregnancy and maternity, race, religion or belief, and marriage and civil partnerships.

Embedded system Test EngineerGlasgow, Lanarkshire, United KingdomFind out how well you match with this jobJob ID9939 Your Impact You will be working on sophisticated, industrial, real-time systems involving embedded hardware and software platforms, automated validation, and simulation of field conditions. This team of engineers develops innovative monitoring systems used for Grid Monitoring, Gas Insulated Switchgear (GIS), and Generation applications in electrical substations and power plants. Here's where you'll demonstrate your proficiencies: Validation and verification of embedded systems incorporating processors, microcontrollers, Linux-based platforms, and analog/digital I/O subsystems. Design, development, and execution of test plans for hardware components integrated with firmware and software. Development of automated test tools, test frameworks, and simulation environments for hardware-in-the-loop (HIL) and system-level testing. Execution of integration testing across hardware, firmware, networking, and application software layers. Support for regulatory and compliance testing activities, including CE, UL, IEC, IEEE, EMC, and environmental verification. Investigation and root-cause analysis of complex system issues using electrical test equipment, protocol analysis tools, network monitoring tools, and system logs. Collaboration with hardware, firmware, software, and systems engineering teams to ensure robust product validation and long-term reliability. Use of Agile Scrum methodologies to support validation activities, continuous improvement, and product quality initiatives. Qualifications The successful candidate will be able to demonstrate the following skills and experience: Bachelor's or Master's degree in Electrical Engineering, Electronic Engineering, Computer Engineering, or equivalent. Industry experience, including at least three years in embedded systems validation, hardware verification, or test automation within a laboratory or production environment. Strong understanding of embedded systems, digital and analogue electronics, and electrical engineering principles. Experience developing automated test solutions using scripting or programming languages such as Python, C#, LabVIEW, or similar. Ability to work independently, manage multiple priorities, and drive high-performance validation strategies. Strong analytical, troubleshooting, interpersonal, and technical communication skills. Preferred Skills Experience with cabinet wiring, electrical safety, circuit protection, and industrial control systems. Hands-on experience using oscilloscopes, digital multimeters (DMMs), signal generators, and other laboratory instrumentation for verification and validation activities. Experience with networking equipment, managed Ethernet switches, GPS, PTP, NTP, or other precision timing technologies. Experience troubleshooting network communications using packet capture and analysis tools such as Wireshark. Experience with industrial communication protocols including IEC 61850, DNP3, Modbus, and related testing methodologies. Experience developing automated test harnesses, regression test systems, and hardware-in-the-loop (HIL) test environments. Familiarity with protocol testing tools such as IEC Browser, IED Scout, Modbus Poll, and Modbus Slave. Exposure to fault location, digital fault recording (DFR), power quality (PQ), synchrophasor (PMU), condition monitoring, or other grid power system applications. Experience with Linux-based embedded platforms and use of version control tools such as Git. Knowledge of serial communication interfaces including UART, SPI, I2C, CAN, or RS-485. Exposure to cybersecurity testing, vulnerability assessment, secure communications protocols, or IEC 62443 requirements would be advantageous. About Ralliant Ralliant stands as a bold, independent public company driving innovation at the forefront of precision technology. With a global footprint and a legacy of excellence, we empower engineers to bring next-generation breakthroughs to life-faster, smarter, and more reliably.Our high-performance instruments, sensors, and subsystems fuel mission-critical advancements across industries, enabling real-world impact where it matters most. From power generation and transmission to industrial automation and critical infrastructure, our technologies help customers monitor, protect, and optimize their most valuable assets.At Ralliant, we're building the future together with those driven to push boundaries, solve complex problems, and leave a lasting mark on the world. Ralliant Corporation Overview Ralliant, originally part of Fortive, now stands as a bold, independent public company driving innovation at the forefront of precision technology. With a global footprint and a legacy of excellence, we empower engineers to bring next-generation breakthroughs to life - faster, smarter, and more reliably. Our high-performance instruments, sensors, and subsystems fuel mission-critical advancements across industries, enabling real-world impact where it matters most. At Ralliant we're building the future, together with those driven to push boundaries, solve complex problems, and leave a lasting mark on the world. About Qualitrol QUALITROL manufactures monitoring and protection devices for high value electrical assets and OEM manufacturing companies. Established in 1945, QUALITROL produces thousands of different types of products on demand and customized to meet our individual customers' needs. We are the largest and most trusted global leader for partial discharge monitoring, asset protection equipment and information products across power generation, transmission, and distribution. At Qualitrol, we are redefining condition-based monitoring.We Are an Equal Opportunity Employer. Ralliant Corporation and all Ralliant Companies are proud to be equal opportunity employers. We value and encourage diversity and solicit applications from all qualified applicants without regard to race, color, national origin, religion, sex, age, marital status, disability, veteran status, sexual orientation, gender identity or expression, or other characteristics protected by law. Ralliant and all Ralliant Companies are also committed to providing reasonable accommodations for applicants with disabilities. Individuals who need a reasonable accommodation because of a disability for any part of the employment application process, please contact us at .

Company Overview Evolito's mission is to accelerate the adoption of electric propulsion in aerospace applications in support of a net zero world. We will help to revolutionise personal mobility and transform our towns and cities with clean, noise free air transportation. Evolito develops and manufactures class leading, lightweight, high power, and high torque density electric propulsion systems for a range of aerospace markets, including EVTOL, Unmanned Aerial Vehicles, and General Aviation. As well as ultra high performance, low weight electric motors and controllers, Evolito specialises in high integrity, bespoke battery systems for the aerospace and defence markets. The team is scaling rapidly and has ambitious growth plans over the next twelve to eighteen months. Responsibilities Assembling test software configurations, involving installation and maintenance of mechanical assemblies, electrical equipment up to 1500Vdc, water and oil coolant systems, instrumentation hardware, communication hardware (e.g. CAN) and pneumatic equipment. Setup of test control system configuration in accordance with the test requirements. Applying knowledge of test rig control systems such as dynos, vibration/shaker, EMC and HALT/HASS chambers to support testing of electrical motors, controllers and electric drive systems. Following pre test assessment processes to ensure test readiness covering technical, operational and safety considerations. Supporting Engineers in the creation of test cases and procedures for conducting tests. Conducting pre defined data analysis and using pre existing analysis tools (e.g., MATLAB & Python scripts). Build and modification of wiring harnesses and other electrical assemblies for test instrumentation (e.g., looms, connectors, crimping and related assembly tasks). Leading laboratory equipment software maintenance and calibration. Identifying and feeding back potential rig design improvements to the wider team. Prioritising safety actions over other tasks and being mindful of the potential safety implications of all testing activities. Documenting laboratory procedures and safe systems of work. Supporting cross functional activities with software, controls and hardware electronics teams. Authoring technical and project documentation (Request for Quotation, Scope of Work, Statement of Work) for delivery of complex test systems in a production environment. Owning and tracking CAPEX for assigned projects to ensure delivery on time and within cost. Supporting the data storage and management strategy for production test equipment, ensuring integration as required with third party software (MES, test control software, data processing software). Defining and tracking all design and functional requirements of the test equipment in your domain, including areas of hardware, software, data management, and H&S. Planning and conducting verification testing of new equipment and facilities during commissioning phases. Qualifications Degree in Mechanical, Electrical, or Electronic Engineering, or equivalent knowledge and experience. Certified LabVIEW Developer or Architect, with experience in AF, DQMH, OOP, and UML design. Experience with dynamometers and production test equipment for electric motors. Knowledge of data management systems and integration of third party software. Experience delivering production test equipment using structured requirements management tools (e.g. PTC Codebeamer). Working knowledge of H&S standards for production equipment and high voltage electrical systems. Ability to compile complex project documentation to align internal and external stakeholders (e.g. Statements of Work). Ability to innovate and develop new methods of test control and instrumentation. Experience using MATLAB or NI tools for test data analysis, including custom scripting. Ability to apply aerospace design processes to production test equipment definition and delivery. Strong hands on approach to test set up, instrumentation, data acquisition, commissioning, and verification. Strong analytical, reasoning, and troubleshooting skills, with good engineering judgement. Flexible, proactive, and able to manage competing priorities under tight deadlines. Strong collaboration and communication skills, with the ability to work effectively across teams. UK driving licence and willingness to travel. Desirable: Experience in testing of motors, MCUs or other powertrain systems. Desirable: Experience working within a Tier1 engineering environment.

Hardware EngineerGlasgow, Lanarkshire, United KingdomFind out how well you match with this jobJob ID9940 Why this is a great place to work It starts with our people and culture. You will work with colleagues who are driven to innovate and solve complex engineering challenges.We foster a culture of continuous improvement, where teams ask the tough questions, challenge assumptions, and push for better outcomes every day. This is achieved in an environment built on authenticity, transparency, and collaboration.As part of Ralliant, Qualitrol combines the agility and ownership of an entrepreneurial organisation with the scale, resources, and best practices of a global technology group.Our Engineering teams are vital to the success of our existing and emerging products and sensors platforms. We are the largest and most trusted global provider of monitoring systems including sensors, monitors and software within the power generation and energy industry. We help our customers to ensure grid reliability and the transition from scheduled to condition based maintenance practices. What you will do As a Hardware Engineer, you will support the design and development of class-leading Condition Based Maintenance systems and products for electrical utilities and industrial customers. You will build and apply strong fundamentals in analogue and digital electronics, working as part of a multidisciplinary team.This role suits a motivated, team-oriented engineer looking to grow technical capability across the full product lifecycle.Reporting to the Engineering Director, you will work closely with engineers and designers in an Agile (Scrum-based) environment to deliver high-quality, customer-focused solutions.You will require good communication skills, a proactive approach to problem solving, and the flexibility to contribute effectively in a fast-paced development environment. Key Responsibilities: Support hardware design activities using: + Development boards + Analysis and simulation tools Create and update schematics and contribute to PCB layout design Support design verification and testing to ensure requirements are met Assist in analysing issues and contributing to technical solutions Ensure design, test, and issue documentation is maintained in line with internal processes Collaborate with firmware, mechanical, and test teams to deliver integrated product solutions Support transition to production, including assisting with failure analysis Support existing products through sustaining and lifecycle activities This opportunity could be for you if you have: Bachelor's degree in Electrical Engineering or related discipline Experience in hardware/electronics engineering Experience contributing to product development lifecycle activities Ability to manage assigned tasks across multiple projects Technical Experience: Analogue and digital circuit design fundamentals Schematic capture and exposure to PCB layout (Altium preferred) Prototype bring-up and basic design verification Use of standard lab equipment: + Oscilloscope + Spectrum analyser + Signal generator Ability to contribute to: + Test procedures + Design documentation Experience interfacing with sensors and basic embedded hardware You may be an excellent fit if you: Are self-motivated and willing to learn Can work effectively both independently and within a team Are comfortable working in a fast-paced, delivery-focused environment Desirable Experience: Industrial or utility product development exposure Understanding of: + Embedded systems or microcontrollers + Communication interfaces ( RS485, Ethernet, SPI, I2C, etc.) + Data acquisition and sensor interfacing Awareness of compliance and testing (e.g. EMC, environmental) Exposure to system-level hardware platforms (e.g. SOMs, processor interfaces) About Us QUALITROL manufactures monitoring and protection devices for high value electrical assets and OEM manufacturing companies. Established in 1945, QUALITROL produces thousands of different types of products on demand and customized to meet our individual customers' needs. We are the largest and most trusted global leader for partial discharge monitoring, asset protection equipment and information products across power generation, transmission, and distribution. Ralliant Corporation Overview Ralliant, originally part of Fortive, now stands as a bold, independent public company driving innovation at the forefront of precision technology. With a global footprint and a legacy of excellence, we empower engineers to bring next-generation breakthroughs to life - faster, smarter, and more reliably. Our high-performance instruments, sensors, and subsystems fuel mission-critical advancements across industries, enabling real-world impact where it matters most. At Ralliant we're building the future, together with those driven to push boundaries, solve complex problems, and leave a lasting mark on the world. About Qualitrol QUALITROL manufactures monitoring and protection devices for high value electrical assets and OEM manufacturing companies. Established in 1945, QUALITROL produces thousands of different types of products on demand and customized to meet our individual customers' needs. We are the largest and most trusted global leader for partial discharge monitoring, asset protection equipment and information products across power generation, transmission, and distribution. At Qualitrol, we are redefining condition-based monitoring.We Are an Equal Opportunity Employer. Ralliant Corporation and all Ralliant Companies are proud to be equal opportunity employers. We value and encourage diversity and solicit applications from all qualified applicants without regard to race, color, national origin, religion, sex, age, marital status, disability, veteran status, sexual orientation, gender identity or expression, or other characteristics protected by law. Ralliant and all Ralliant Companies are also committed to providing reasonable accommodations for applicants with disabilities. Individuals who need a reasonable accommodation because of a disability for any part of the employment application process, please contact us at .

Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Major UK programmes such as Apache, Chinook, C-17, P-8A and Wedgetail are supported and delivered by Boeing Defence UK (BDUK), a subsidiary of The Boeing Company. Employing more than 1,400 people, BDUK also provides engineering sustainment and support for aircraft in service with the UK armed forces, along with virtual and instructor led training. Leveraging our established defence business in the UK, and blending our local expertise with our 'One Boeing' global approach, BDUK is well positioned to support the UK with its current and future defence and security challenges. The P8 Training Services based at RAF Lossiemouth provides P8 synthetic training to our MOD customer through the utilisation of state of the art simulation and training systems. P8 Training Engineering supports the continuity of the training delivery through pro active maintenance and management of the training devices and infrastructure. Responsibilities Assists with repairs and tests, installs, configures, upgrades and assists in the modification of simulators and training components, devices, hardware and software Performs general inspections for pre operations, post operations and component handling of training devices, assemblies and components Conducts functional tests of training device systems and monitors device instrumentation and bench mounted indicators Troubleshooting systems, support equipment to isolate faults and repair faulty components Works under limited supervision Develop and enhance existing processes and procedures to drive continuous improvement within the P8 Device Maintenance Department. Additional Duties Perform extra duties to support the maintenance team as tasked by Shift lead or Engineering Manager. Basic Qualifications (Required skills/Experience) Excellent organization and computing skills. Good level of experience with electronic/electrical systems. Proficient with Microsoft office applications. Preferred Qualifications (Desired Skills/Experience) Experience on flight simulators and training equipment. Time served indentured apprenticeship (Simulator/Avionics/Electronics/Engineering) NVQ level 3 Electrical/Electronics/Avionics Knowledge of computer networking Experience with qualification test guide running and grading (QTG's). Knowledge of the Military Air Environment and associated governance. HNC or higher Electronics/Avionics/Aircraft Engineering Location & Hours This position will be based onsite at RAF Lossiemouth, full time and will operate on a shift pattern. Applications for this position will be accepted until Jul. 20, 2026 Export Control Requirements This is not an Export Control position. Relocation Relocation assistance is not a negotiable benefit for this position. Security Clearance This position requires the ability to obtain United Kingdom Security Check. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift Shift Worker (United Kingdom) Equal Opportunity Employer We are an equal opportunity employer. We do not accept unlawful discrimination in our recruitment or employment practices on any grounds including but not limited to; race, color, ethnicity, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military and veteran status, or other characteristics covered by applicable law. We have teams in more than 65 countries, and each person plays a role in helping us become one of the world's most innovative, diverse and inclusive companies. We are a Disability Confident Committed employer and welcome applications from candidates with disabilities. Applicants are encouraged to share with our recruitment team any accommodations required during the recruitment process. Accommodations may include but are not limited to: conducting interviews in accessible locations that accommodate mobility needs, encouraging candidates to bring and use any existing assistive technology such as screen readers and offering flexible interview formats such as virtual or phone interviews.