Barron McCann are excited to be recruiting for a Field Support Specialist in the Enfield (North London Area). Barron McCann have created 8 new Field Support Specialist roles across the UK to sit across both Projects and Service, supporting the engineers and becoming a subject matter expert. Barron McCann Ltd is an independent IT service provider offering a range of IT support services, from help desk through to rapid response on sight repair and maintenance; our customers are some of the most prestigious names on the high street. What you will be doing: Carrying out technical site visits as required for repairs on IT equipment Diagnose and carry out structured cabling or WiFi Fault repairs Attend fault calls where the local engineer does not have the required skill set Attend escalated break-fix and problem calls Diagnose and/or repair faults to component level, or whole unit replacement where required Conduct site surveys for WiFi installation and planned upgrades Planned and regular maintenance of all on site equipment Responsible for advice to employed engineer's queries Coaching and mentoring individual engineers to improve technical and soft skills Responsible for ensuring all knowledge is current and up to date, and responsible for introducing new processes and equipment as required The ability to have technical conversations and effectively challenge and question to ensure the correct outcome Provide support for engineer's development plans to improve their capabilities Be prepared and available to undertake any relevant training as required Provide a timely, polite and effective service Provide on-call cover during evenings and weekends on a rotational basis There is a requirement to work at various heights, therefore, the ability to carry out work using ladders, and other such equipment is a requirement Skills, Knowledge & Experience: Essential: Experience of maintaining and installing EPoS equipment Detailed knowledge of computer hardware (EPoS, PC's, IP networks, WiFi networks and Service Hardware) Planning and organisational skills; able to establish efficient and appropriate plans, and adapt quickly and effectively too unexpected changes Customer service; understands and responds to customer needs (internal and external), and exceeds expectations where possible Communication and team working; work co-operatively with others to achieve a common goal, and communicate information in a clear, concise and accurate manner Problem solving and decision making; analyse information appropriately in order to find the best solution, and take a balanced view to reach logical conclusions and make relevant decisions. Commercial and organisational focus; demonstrate an understanding of overall business and commercial issues facing the company Commitment to results; committed to obtaining results through taking responsibility, demonstrating a positive attitude and ensuring quality Desired: Previous experience of working within a mobile workforce Proficient in the use of Microsoft Office software Ability to quickly learn new software packages Due to the nature of the work, out of hours work will be required Extensive travelling within the area is required Occasional overnight stays Full UK driving license With this being a field based role a driving licence is essential as you will be given a company vehicle. If this role is of interest, apply today to avoid disappointment.
03/03/2026
Full time
Barron McCann are excited to be recruiting for a Field Support Specialist in the Enfield (North London Area). Barron McCann have created 8 new Field Support Specialist roles across the UK to sit across both Projects and Service, supporting the engineers and becoming a subject matter expert. Barron McCann Ltd is an independent IT service provider offering a range of IT support services, from help desk through to rapid response on sight repair and maintenance; our customers are some of the most prestigious names on the high street. What you will be doing: Carrying out technical site visits as required for repairs on IT equipment Diagnose and carry out structured cabling or WiFi Fault repairs Attend fault calls where the local engineer does not have the required skill set Attend escalated break-fix and problem calls Diagnose and/or repair faults to component level, or whole unit replacement where required Conduct site surveys for WiFi installation and planned upgrades Planned and regular maintenance of all on site equipment Responsible for advice to employed engineer's queries Coaching and mentoring individual engineers to improve technical and soft skills Responsible for ensuring all knowledge is current and up to date, and responsible for introducing new processes and equipment as required The ability to have technical conversations and effectively challenge and question to ensure the correct outcome Provide support for engineer's development plans to improve their capabilities Be prepared and available to undertake any relevant training as required Provide a timely, polite and effective service Provide on-call cover during evenings and weekends on a rotational basis There is a requirement to work at various heights, therefore, the ability to carry out work using ladders, and other such equipment is a requirement Skills, Knowledge & Experience: Essential: Experience of maintaining and installing EPoS equipment Detailed knowledge of computer hardware (EPoS, PC's, IP networks, WiFi networks and Service Hardware) Planning and organisational skills; able to establish efficient and appropriate plans, and adapt quickly and effectively too unexpected changes Customer service; understands and responds to customer needs (internal and external), and exceeds expectations where possible Communication and team working; work co-operatively with others to achieve a common goal, and communicate information in a clear, concise and accurate manner Problem solving and decision making; analyse information appropriately in order to find the best solution, and take a balanced view to reach logical conclusions and make relevant decisions. Commercial and organisational focus; demonstrate an understanding of overall business and commercial issues facing the company Commitment to results; committed to obtaining results through taking responsibility, demonstrating a positive attitude and ensuring quality Desired: Previous experience of working within a mobile workforce Proficient in the use of Microsoft Office software Ability to quickly learn new software packages Due to the nature of the work, out of hours work will be required Extensive travelling within the area is required Occasional overnight stays Full UK driving license With this being a field based role a driving licence is essential as you will be given a company vehicle. If this role is of interest, apply today to avoid disappointment.
Junior Network Engineer Ashford, Kent (field-based with client travel) 30,000+ DOE Are you early in your networking career and keen to build real hands-on experience? Do you enjoy both technical configuration and physical infrastructure work? Have you worked in (or want exposure to) an MSP environment where no two days are the same? If so, this could be a strong next step. We are recruiting for a Junior Network Engineer to join a growing Managed Service Provider supporting a wide range of business clients. This is a genuinely varied, fast-paced role combining logical network engineering with structured cabling and physical installations. It will suit someone practical, proactive, and comfortable working across multiple client environments both remotely and on-site. You will gain exposure to enterprise-grade networking technologies while building solid real-world deployment experience. Due to the project-led nature of MSP work, the role involves regular client travel and occasional out-of-hours work. The Role You will support the design, deployment, and ongoing support of client network environments, working closely with senior engineers and technical leadership. This is a hands-on position where you will be involved from physical install through to configuration and troubleshooting. Key Responsibilities Network Deployment & Support Assist with configuration, deployment, and support of client network infrastructure Work with technologies including: Cisco Systems Cisco Meraki Ubiquiti WatchGuard Hewlett Packard Enterprise Provision switches, routers, firewalls, and wireless access points Support VLANs, subnetting, DHCP, DNS, VPNs, and firewall rules Assist with cloud-managed networking platforms (e.g. Meraki Dashboard) Monitor network performance and respond to alerts Troubleshoot connectivity, WiFi, and performance issues Provide both remote and on-site technical support Maintain clear and accurate client documentation Carry out routine maintenance including firmware patching and testing Support VoIP and telephony deployments where required Structured Cabling & Physical Infrastructure Install copper data cabling (Cat6 / Cat6a) Run, terminate, and test fibre optic cabling (internal and external) Install patch panels, faceplates, and fibre enclosures Build and dress network cabinets and containment Mount switches, firewalls, and wireless access points Test, certify, and clearly label installed cabling Ensure all installations are neat, professional, and best-practice compliant Project Work Support senior engineers on upgrades, migrations, and new site deployments Assist with office moves and new business setups Conduct basic site surveys and cable route planning Travel to client sites (primarily regional with occasional national travel) Occasionally work evenings or weekends to minimise client disruption Ensure projects are delivered safely, on time, and to a high standard What We Are Looking For Essential - Solid understanding of networking fundamentals (TCP/IP, VLANs, subnetting) - Some hands-on experience configuring switches and routers - Experience running and terminating copper cabling - Willingness to work with fibre optic cabling - Strong troubleshooting mindset - Confident communication skills in client-facing situations - Full UK driving licence - Comfortable working at height and in ceiling voids - Flexible approach to occasional out-of-hours work Desirable - CompTIA Network+ or Cisco CCNA - Experience with Cisco Meraki dashboard - Fibre termination and testing experience - Exposure to firewall configuration and site-to-site VPNs - Previous MSP experience - Basic VoIP knowledge Personal Attributes - Customer-focused and professional - Eager to learn across multiple vendor platforms - Well organised with good attention to detail - Able to manage multiple client priorities - Reliable, proactive, and hands-on - Flexible and adaptable to project demands
23/02/2026
Full time
Junior Network Engineer Ashford, Kent (field-based with client travel) 30,000+ DOE Are you early in your networking career and keen to build real hands-on experience? Do you enjoy both technical configuration and physical infrastructure work? Have you worked in (or want exposure to) an MSP environment where no two days are the same? If so, this could be a strong next step. We are recruiting for a Junior Network Engineer to join a growing Managed Service Provider supporting a wide range of business clients. This is a genuinely varied, fast-paced role combining logical network engineering with structured cabling and physical installations. It will suit someone practical, proactive, and comfortable working across multiple client environments both remotely and on-site. You will gain exposure to enterprise-grade networking technologies while building solid real-world deployment experience. Due to the project-led nature of MSP work, the role involves regular client travel and occasional out-of-hours work. The Role You will support the design, deployment, and ongoing support of client network environments, working closely with senior engineers and technical leadership. This is a hands-on position where you will be involved from physical install through to configuration and troubleshooting. Key Responsibilities Network Deployment & Support Assist with configuration, deployment, and support of client network infrastructure Work with technologies including: Cisco Systems Cisco Meraki Ubiquiti WatchGuard Hewlett Packard Enterprise Provision switches, routers, firewalls, and wireless access points Support VLANs, subnetting, DHCP, DNS, VPNs, and firewall rules Assist with cloud-managed networking platforms (e.g. Meraki Dashboard) Monitor network performance and respond to alerts Troubleshoot connectivity, WiFi, and performance issues Provide both remote and on-site technical support Maintain clear and accurate client documentation Carry out routine maintenance including firmware patching and testing Support VoIP and telephony deployments where required Structured Cabling & Physical Infrastructure Install copper data cabling (Cat6 / Cat6a) Run, terminate, and test fibre optic cabling (internal and external) Install patch panels, faceplates, and fibre enclosures Build and dress network cabinets and containment Mount switches, firewalls, and wireless access points Test, certify, and clearly label installed cabling Ensure all installations are neat, professional, and best-practice compliant Project Work Support senior engineers on upgrades, migrations, and new site deployments Assist with office moves and new business setups Conduct basic site surveys and cable route planning Travel to client sites (primarily regional with occasional national travel) Occasionally work evenings or weekends to minimise client disruption Ensure projects are delivered safely, on time, and to a high standard What We Are Looking For Essential - Solid understanding of networking fundamentals (TCP/IP, VLANs, subnetting) - Some hands-on experience configuring switches and routers - Experience running and terminating copper cabling - Willingness to work with fibre optic cabling - Strong troubleshooting mindset - Confident communication skills in client-facing situations - Full UK driving licence - Comfortable working at height and in ceiling voids - Flexible approach to occasional out-of-hours work Desirable - CompTIA Network+ or Cisco CCNA - Experience with Cisco Meraki dashboard - Fibre termination and testing experience - Exposure to firewall configuration and site-to-site VPNs - Previous MSP experience - Basic VoIP knowledge Personal Attributes - Customer-focused and professional - Eager to learn across multiple vendor platforms - Well organised with good attention to detail - Able to manage multiple client priorities - Reliable, proactive, and hands-on - Flexible and adaptable to project demands
CBSbutler Holdings Limited trading as CBSbutler
Barrow-in-furness, Cumbria
Senior Network Engineer (Contract) Contract Duration: initial 12 months, extensions likely Location: Barrow-in-Furness, Cumbria - Full-time onsite Rate: 550 - 600/day - Inside IR35 Eligibility Requirements Active SC Clearance is mandatory Sole UK Nationality required (UK passport only) Additional vetting applies; onboarding may take longer than standard processes Role Overview We are seeking an experienced Senior Network Engineer to lead the design and delivery of enterprise network infrastructure for a major secure programme. This is a hands-on, on-site role focused on physical network environments, structured cabling, comms rooms, and Cisco-based network implementations. You will take ownership of technical design, documentation, and on-site delivery, working closely with engineers, project managers, and suppliers to build resilient, secure IT environments. Key Responsibilities Lead technical design, planning, and on-site implementation of network infrastructure projects Design and oversee comms rooms, rack layouts, patching schemes, structured cabling and containment (copper and fibre) Produce and maintain High-Level and Low-Level Designs (HLD/LLD) and technical documentation Provide technical assurance on containment design, pathways, labelling, and installation standards Support configuration, deployment, and troubleshooting of Cisco network equipment (switching, routing, wireless, firewalls) Integrate storage platforms (SAN/NAS) and associated networking Plan UPS and power resilience solutions for comms rooms and infrastructure environments Conduct site surveys, hardware audits, and implementation assessments Ensure solutions meet security, operational, and compliance requirements Work with suppliers and third parties on quotes, delivery, and technical coordination Essential Skills & Experience Strong background in enterprise network infrastructure and on-site delivery Deep knowledge of structured cabling (Cat5e/6/6a), fibre types, termination standards, and containment Hands-on experience with Cisco switching and routing (IOS / NX-OS) Understanding of VLANs, routing protocols, DHCP, DNS, wireless and segmentation Experience with SAN/NAS connectivity and storage networking Knowledge of UPS, power distribution, and environmental requirements for comms rooms Ability to interpret and produce technical drawings, schematics, rack elevations and wiring diagrams Excellent stakeholder communication and leadership skills Active SC Clearance (mandatory) Desirable Experience Experience in secure or regulated environments (defence, government, critical national infrastructure) ITSM knowledge (ServiceNow or similar) Datacentre best practices (cooling, redundancy, monitoring) Certifications such as CCNA / CCNP / CompTIA Network+ / Server+ or vendor cabling accreditations Working Requirements Full-time onsite presence in Barrow-in-Furness Sole UK nationality (security constraint) Behaviours & Culture Fit We're looking for someone who: Is approachable and collaborative Shares challenges openly and helps solve them Has the courage to challenge and innovate Asks questions and seeks continuous improvement Demonstrates a strong "can-do" delivery mindset
18/02/2026
Contractor
Senior Network Engineer (Contract) Contract Duration: initial 12 months, extensions likely Location: Barrow-in-Furness, Cumbria - Full-time onsite Rate: 550 - 600/day - Inside IR35 Eligibility Requirements Active SC Clearance is mandatory Sole UK Nationality required (UK passport only) Additional vetting applies; onboarding may take longer than standard processes Role Overview We are seeking an experienced Senior Network Engineer to lead the design and delivery of enterprise network infrastructure for a major secure programme. This is a hands-on, on-site role focused on physical network environments, structured cabling, comms rooms, and Cisco-based network implementations. You will take ownership of technical design, documentation, and on-site delivery, working closely with engineers, project managers, and suppliers to build resilient, secure IT environments. Key Responsibilities Lead technical design, planning, and on-site implementation of network infrastructure projects Design and oversee comms rooms, rack layouts, patching schemes, structured cabling and containment (copper and fibre) Produce and maintain High-Level and Low-Level Designs (HLD/LLD) and technical documentation Provide technical assurance on containment design, pathways, labelling, and installation standards Support configuration, deployment, and troubleshooting of Cisco network equipment (switching, routing, wireless, firewalls) Integrate storage platforms (SAN/NAS) and associated networking Plan UPS and power resilience solutions for comms rooms and infrastructure environments Conduct site surveys, hardware audits, and implementation assessments Ensure solutions meet security, operational, and compliance requirements Work with suppliers and third parties on quotes, delivery, and technical coordination Essential Skills & Experience Strong background in enterprise network infrastructure and on-site delivery Deep knowledge of structured cabling (Cat5e/6/6a), fibre types, termination standards, and containment Hands-on experience with Cisco switching and routing (IOS / NX-OS) Understanding of VLANs, routing protocols, DHCP, DNS, wireless and segmentation Experience with SAN/NAS connectivity and storage networking Knowledge of UPS, power distribution, and environmental requirements for comms rooms Ability to interpret and produce technical drawings, schematics, rack elevations and wiring diagrams Excellent stakeholder communication and leadership skills Active SC Clearance (mandatory) Desirable Experience Experience in secure or regulated environments (defence, government, critical national infrastructure) ITSM knowledge (ServiceNow or similar) Datacentre best practices (cooling, redundancy, monitoring) Certifications such as CCNA / CCNP / CompTIA Network+ / Server+ or vendor cabling accreditations Working Requirements Full-time onsite presence in Barrow-in-Furness Sole UK nationality (security constraint) Behaviours & Culture Fit We're looking for someone who: Is approachable and collaborative Shares challenges openly and helps solve them Has the courage to challenge and innovate Asks questions and seeks continuous improvement Demonstrates a strong "can-do" delivery mindset
Our established and growing client in Cardiff is recruiting for an experienced Senior Project Manager join them on a permanent basis. You will lead the successful delivery of complex, multi-site IT and infrastructure projects across enterprise environments. This is a senior-level role requiring strong leadership, commercial awareness, and the ability to manage multiple stakeholders while delivering high-quality outcomes on time and within budget. You will play a key role in overseeing national-scale technology deployments, ensuring robust governance, effective risk management, and consistent delivery standards across all projects. Key Responsibilities: Lead and deliver complex, multi-site IT and infrastructure projects, including structured cabling and technology rollouts Develop and manage project plans, budgets, risks, dependencies, and reporting Apply recognised project management methodologies (PRINCE2, Agile, ITIL) Act as the primary point of contact for clients, suppliers, and internal teams Coordinate field engineers, subcontractors, and project resources Ensure compliance with health & safety, governance, and quality standards Maintain accurate project documentation and reporting Mentor junior project managers and contribute to PMO best practice Skills, Experience & Qualification: Proven experience managing large-scale, multi-site IT or infrastructure projects Strong knowledge of project management frameworks (PRINCE2, Agile) Experience delivering structured cabling and technology deployment projects Excellent organisational, communication, and stakeholder management skills Ability to manage budgets, risks, and priorities in a fast-paced environment Proficient in MS Project, Excel , and project management tools PRINCE2 or PMP certification (essential) Experience working within compliance and risk management frameworks Salary & Benefits: Salary will be between 40-55k dependant on experience. You will also receive a comprehensive benefits package including: Private Medical Insurance delivered through BUPA. Hybrid options (3 or 4 days in the office). Company pension scheme. Group income protection. 23 days holiday plus bank holidays. Life cover (4 x basic salary). Free on-site parking. Excellent reward & recognition scheme. Genuine opportunities to grow and develop professionally within the business. Discounted gym membership This is an exciting opportunity to join a highly successful organisation in the next stage of their continued growth. If this role sounds like it could be you then we'd love to hear from you!
16/02/2026
Full time
Our established and growing client in Cardiff is recruiting for an experienced Senior Project Manager join them on a permanent basis. You will lead the successful delivery of complex, multi-site IT and infrastructure projects across enterprise environments. This is a senior-level role requiring strong leadership, commercial awareness, and the ability to manage multiple stakeholders while delivering high-quality outcomes on time and within budget. You will play a key role in overseeing national-scale technology deployments, ensuring robust governance, effective risk management, and consistent delivery standards across all projects. Key Responsibilities: Lead and deliver complex, multi-site IT and infrastructure projects, including structured cabling and technology rollouts Develop and manage project plans, budgets, risks, dependencies, and reporting Apply recognised project management methodologies (PRINCE2, Agile, ITIL) Act as the primary point of contact for clients, suppliers, and internal teams Coordinate field engineers, subcontractors, and project resources Ensure compliance with health & safety, governance, and quality standards Maintain accurate project documentation and reporting Mentor junior project managers and contribute to PMO best practice Skills, Experience & Qualification: Proven experience managing large-scale, multi-site IT or infrastructure projects Strong knowledge of project management frameworks (PRINCE2, Agile) Experience delivering structured cabling and technology deployment projects Excellent organisational, communication, and stakeholder management skills Ability to manage budgets, risks, and priorities in a fast-paced environment Proficient in MS Project, Excel , and project management tools PRINCE2 or PMP certification (essential) Experience working within compliance and risk management frameworks Salary & Benefits: Salary will be between 40-55k dependant on experience. You will also receive a comprehensive benefits package including: Private Medical Insurance delivered through BUPA. Hybrid options (3 or 4 days in the office). Company pension scheme. Group income protection. 23 days holiday plus bank holidays. Life cover (4 x basic salary). Free on-site parking. Excellent reward & recognition scheme. Genuine opportunities to grow and develop professionally within the business. Discounted gym membership This is an exciting opportunity to join a highly successful organisation in the next stage of their continued growth. If this role sounds like it could be you then we'd love to hear from you!
Installations Technician Base Salary £28-£30k Plus Van & benefits Based in Preston UK travel The opportunity: As a Installations Technician this is your chance to work with one of the UKs most exciting names in the sports technology and live entertainment space. They install products and equipment that inspire viewers, excite crowds, and transform spaces. For over 30 years, this company has partnered with some of the world s most famous sporting events, stadiums, brands, events, and venues to visually transform physical spaces with future proof concepts It s a world class company, with world class products and a world class team And we want you to join them! Day to day In your role as a Installations and Service Technician you ll work alongside the projects and operations team, installing, commissioning, and maintaining LED / AV / Screens and systems at client sites across the UK. Key aspects of your role will be; build and install AV and rack-based systems. maintain, service, and upgrade technical equipment research, design and develop proof of concepts / solutions for a variety of innovative projects manage incidents and faults, documenting progress, and escalating where necessary Who we are looking for We d like to speak with you if you have; A passion for technology Any background in Electrical Engineering, or structured cabling or IT infrastructure Ability to drive and travel to sites, sometimes across the UK The Next Steps If this sounds like you, or you would like to find out more about this opportunity then you have three options. Call Joe White at CRG TEC to find out more. We are really open about the role and opportunity and challenges, so if you need to find out more before committing, no problem! Contact Joe via LI, drop him a private message and he will get back to you If you are happy with what you have read so far, then send a copy of your CV to this advert and Joe will give you a call to discuss further or at least get back to you if you don t quite hit the mark.
06/02/2026
Full time
Installations Technician Base Salary £28-£30k Plus Van & benefits Based in Preston UK travel The opportunity: As a Installations Technician this is your chance to work with one of the UKs most exciting names in the sports technology and live entertainment space. They install products and equipment that inspire viewers, excite crowds, and transform spaces. For over 30 years, this company has partnered with some of the world s most famous sporting events, stadiums, brands, events, and venues to visually transform physical spaces with future proof concepts It s a world class company, with world class products and a world class team And we want you to join them! Day to day In your role as a Installations and Service Technician you ll work alongside the projects and operations team, installing, commissioning, and maintaining LED / AV / Screens and systems at client sites across the UK. Key aspects of your role will be; build and install AV and rack-based systems. maintain, service, and upgrade technical equipment research, design and develop proof of concepts / solutions for a variety of innovative projects manage incidents and faults, documenting progress, and escalating where necessary Who we are looking for We d like to speak with you if you have; A passion for technology Any background in Electrical Engineering, or structured cabling or IT infrastructure Ability to drive and travel to sites, sometimes across the UK The Next Steps If this sounds like you, or you would like to find out more about this opportunity then you have three options. Call Joe White at CRG TEC to find out more. We are really open about the role and opportunity and challenges, so if you need to find out more before committing, no problem! Contact Joe via LI, drop him a private message and he will get back to you If you are happy with what you have read so far, then send a copy of your CV to this advert and Joe will give you a call to discuss further or at least get back to you if you don t quite hit the mark.
We are currently seeking experienced Data Cabling Engineers for projects various projects needing Enhanced DBS . Scope of Work: Installation, pulling, terminating, and testing of copper cabling Working within a new-build construction environment Adhering to site safety and quality installation standards Requirements: Minimum 3 years experience working on structured cabling projects Valid ECS or CSCS card - Essential IPAF certification CNCI - Not Essential Enhanced DBS Strong understanding of structured cabling practices and standards Ability to work efficiently as part of a team under tight timelines Must be able to provide 2 recent references from relevant projects Working Hours & Duration: Monday to Friday with Weekends available Potential overtime available depending on site requirements Long-term project with consistent work for the right engineers
06/02/2026
Contractor
We are currently seeking experienced Data Cabling Engineers for projects various projects needing Enhanced DBS . Scope of Work: Installation, pulling, terminating, and testing of copper cabling Working within a new-build construction environment Adhering to site safety and quality installation standards Requirements: Minimum 3 years experience working on structured cabling projects Valid ECS or CSCS card - Essential IPAF certification CNCI - Not Essential Enhanced DBS Strong understanding of structured cabling practices and standards Ability to work efficiently as part of a team under tight timelines Must be able to provide 2 recent references from relevant projects Working Hours & Duration: Monday to Friday with Weekends available Potential overtime available depending on site requirements Long-term project with consistent work for the right engineers
Job Title: Senior Field Based Comms Engineer Location: Pencoed, Bridgend (Field Based) Salary: 33,000 - 37,000 per annum depending on experience Job Type: Full time, Permanent Working Hours: Monday to Friday - 8am to 6pm (8.5 hour day / 42.5 hours in between these times) Who are we: Flotek Group is one of the fastest-growing Tech Companies in the UK, providing IT, Cybersecurity and Comms technology to small & medium businesses. With sales and support locations across the country, our ambitious growth is driven by our core values and fundamental principles. We deliver every product and service with expertise, passion, and heart. When you join Flotek Group you join our "Purple Army" and become part of a team driven by a set of values that guide our every interaction, both with each other and with our partners. We enjoy a collaborative, fast-paced working environment, where we can expect to learn to be exceptional, earn trust through actions and receive recognition when our work gets a "Wow!" About the Role: We are seeking a skilled Communications Engineer, with extensive experience in data networking and structured cabling to join our technical team. The ideal candidate will be responsible for the design, installation, and maintenance of VoIP systems, network infrastructure, and data cabling within our group and Partner environments. This is a hands-on role combining both network engineering expertise and practical on-site cabling and deployment work. Travel, nights away, and occasional weekend work will be required, but notice will always be given in advance. Responsibilities: Install, configure, and support VoIP phone system Manage and maintain PBX systems, SIP trunks, and related network components. Work with ISPs and SIP providers to resolve connectivity and call routing issues. Design, deploy, and maintain LAN/WAN infrastructure including switches, routers, and firewalls. Configure VLANs, DHCP, DNS, VPNs, and QoS policies to support voice and data networks. Conduct site surveys and assist in planning network topologies. Perform diagnostics, monitoring, and performance tuning on network equipment. Install Cat6, and fibre cabling systems according to best practices. Fluke Test and certify new cabling installations. Maintain accurate documentation of network layouts, configurations, and cabling routes. Provide Level support for escalated network and VoIP issues. Working away is required in this role to support our partners Liaise with internal teams and third-party vendors to ensure project delivery and uptime What we're looking for: Proven experience in VoIP engineering and network administration. Strong understanding network routing/switching. Experience with structured cabling installation and cable testing tools. Familiarity with Routers DrayTek, and Aruba Wi-Fi Hands-on experience with PoE switches, IP phones, and network monitoring tools. Full UK driving licence and willingness to travel to sites. Benefits: Competitive salary of 33,000 - 37,000 (experience depending). Inclusive EMI Share Equity Scheme - own a slice of the "Purple Pie." Day off for your birthday. Day off for other life's milestones - such as weddings, moving house, child's first day at school, or religious holidays. Give back day to support your chosen charity. Savings on gym memberships, shopping and other discounts available through Perkbox. Variety of social events & team building opportunities are available. Opportunities for professional growth and development. Collaborative and supportive work environment. Due to the nature of the role the company will not be able to offer sponsorship or relocation assistance so candidates must already reside in the UK. Please click the APPLY button to submit your CV for this role. Candidates with the experience or relevant job titles of; Communications Engineer, Telecoms Support, 2nd Line Support, VoIP Engineer, IT Network Engineer, VoIP, Network Administrator and Telecommunications Support Technician may also be considered for this role
05/02/2026
Full time
Job Title: Senior Field Based Comms Engineer Location: Pencoed, Bridgend (Field Based) Salary: 33,000 - 37,000 per annum depending on experience Job Type: Full time, Permanent Working Hours: Monday to Friday - 8am to 6pm (8.5 hour day / 42.5 hours in between these times) Who are we: Flotek Group is one of the fastest-growing Tech Companies in the UK, providing IT, Cybersecurity and Comms technology to small & medium businesses. With sales and support locations across the country, our ambitious growth is driven by our core values and fundamental principles. We deliver every product and service with expertise, passion, and heart. When you join Flotek Group you join our "Purple Army" and become part of a team driven by a set of values that guide our every interaction, both with each other and with our partners. We enjoy a collaborative, fast-paced working environment, where we can expect to learn to be exceptional, earn trust through actions and receive recognition when our work gets a "Wow!" About the Role: We are seeking a skilled Communications Engineer, with extensive experience in data networking and structured cabling to join our technical team. The ideal candidate will be responsible for the design, installation, and maintenance of VoIP systems, network infrastructure, and data cabling within our group and Partner environments. This is a hands-on role combining both network engineering expertise and practical on-site cabling and deployment work. Travel, nights away, and occasional weekend work will be required, but notice will always be given in advance. Responsibilities: Install, configure, and support VoIP phone system Manage and maintain PBX systems, SIP trunks, and related network components. Work with ISPs and SIP providers to resolve connectivity and call routing issues. Design, deploy, and maintain LAN/WAN infrastructure including switches, routers, and firewalls. Configure VLANs, DHCP, DNS, VPNs, and QoS policies to support voice and data networks. Conduct site surveys and assist in planning network topologies. Perform diagnostics, monitoring, and performance tuning on network equipment. Install Cat6, and fibre cabling systems according to best practices. Fluke Test and certify new cabling installations. Maintain accurate documentation of network layouts, configurations, and cabling routes. Provide Level support for escalated network and VoIP issues. Working away is required in this role to support our partners Liaise with internal teams and third-party vendors to ensure project delivery and uptime What we're looking for: Proven experience in VoIP engineering and network administration. Strong understanding network routing/switching. Experience with structured cabling installation and cable testing tools. Familiarity with Routers DrayTek, and Aruba Wi-Fi Hands-on experience with PoE switches, IP phones, and network monitoring tools. Full UK driving licence and willingness to travel to sites. Benefits: Competitive salary of 33,000 - 37,000 (experience depending). Inclusive EMI Share Equity Scheme - own a slice of the "Purple Pie." Day off for your birthday. Day off for other life's milestones - such as weddings, moving house, child's first day at school, or religious holidays. Give back day to support your chosen charity. Savings on gym memberships, shopping and other discounts available through Perkbox. Variety of social events & team building opportunities are available. Opportunities for professional growth and development. Collaborative and supportive work environment. Due to the nature of the role the company will not be able to offer sponsorship or relocation assistance so candidates must already reside in the UK. Please click the APPLY button to submit your CV for this role. Candidates with the experience or relevant job titles of; Communications Engineer, Telecoms Support, 2nd Line Support, VoIP Engineer, IT Network Engineer, VoIP, Network Administrator and Telecommunications Support Technician may also be considered for this role
Project Manager Defence Location: South East England Clearance: Must already hold active SC security clearance I m working with a leading organisation in the Defence sector that is seeking an experienced Project Manager to oversee the successful delivery of telecoms and infrastructure projects. This is a high-profile role managing projects from bid through to completion, ensuring compliance with MoD standards, safety regulations, and commercial objectives. Key Responsibilities Lead the end-to-end delivery of Defence projects, ensuring health & safety and compliance are always prioritised Manage project budgets, profitability, and reporting, with input into P&L performance Provide leadership to project engineers, engineers, and subcontractors, maximising team performance Maintain strong relationships with MoD stakeholders and clients, ensuring service levels and expectations are met Ensure all technical installations meet specifications, statutory requirements, and MoD standards Support bid activity and business planning alongside senior management What We re Looking For Essential: Active SC clearance (must already be held to apply) Proven project delivery experience in a construction/building services environment Knowledge of MoD standards, processes, and structures Strong commercial awareness with budget and cost control experience Ability to understand technical drawings and specifications Project Management certification (APM, PRINCE2, or equivalent) Driving licence Desirable: Structured cabling/datacomms experience Electrical knowledge and red-line drawings experience Familiarity with service level agreements and escalation processes Additional qualifications (IOSH, SMSTS, First Aid, etc.) Why This Role? This is an excellent opportunity for a Project Manager who thrives in complex, secure environments and is motivated by delivering projects that support national security. The role offers exposure to cutting-edge Defence programmes, professional development opportunities, and the chance to work within a highly respected organisation. If you re a proven Project Manager with active SC clearance and Defence sector experience, I d love to discuss this opportunity with you in confidence.
07/10/2025
Contractor
Project Manager Defence Location: South East England Clearance: Must already hold active SC security clearance I m working with a leading organisation in the Defence sector that is seeking an experienced Project Manager to oversee the successful delivery of telecoms and infrastructure projects. This is a high-profile role managing projects from bid through to completion, ensuring compliance with MoD standards, safety regulations, and commercial objectives. Key Responsibilities Lead the end-to-end delivery of Defence projects, ensuring health & safety and compliance are always prioritised Manage project budgets, profitability, and reporting, with input into P&L performance Provide leadership to project engineers, engineers, and subcontractors, maximising team performance Maintain strong relationships with MoD stakeholders and clients, ensuring service levels and expectations are met Ensure all technical installations meet specifications, statutory requirements, and MoD standards Support bid activity and business planning alongside senior management What We re Looking For Essential: Active SC clearance (must already be held to apply) Proven project delivery experience in a construction/building services environment Knowledge of MoD standards, processes, and structures Strong commercial awareness with budget and cost control experience Ability to understand technical drawings and specifications Project Management certification (APM, PRINCE2, or equivalent) Driving licence Desirable: Structured cabling/datacomms experience Electrical knowledge and red-line drawings experience Familiarity with service level agreements and escalation processes Additional qualifications (IOSH, SMSTS, First Aid, etc.) Why This Role? This is an excellent opportunity for a Project Manager who thrives in complex, secure environments and is motivated by delivering projects that support national security. The role offers exposure to cutting-edge Defence programmes, professional development opportunities, and the chance to work within a highly respected organisation. If you re a proven Project Manager with active SC clearance and Defence sector experience, I d love to discuss this opportunity with you in confidence.
Structured Cabling Data Engineer Plymouth (On Site) Permanent Summary NG Bailey IT Services are currently recruiting a Structured Cabling Data Engineer / Managed Services Engineer who will be responsible for the installation and fault finding of Structured and Voice Cabling systems and are delivered within NG Bailey's clients Service Level Agreements (SLA). The Data Engineer will have experience of the installation and fault finding of Structured and Voice Cabling systems and preferably hold the CNCI (Certified Network Cable Installer) qualification. You will be responsible for responding to any of our managed service contract break fix requests as per the contract SLA's. It will be desirable to have experience as a service engineer of Electronic IP Security Systems. This position is working across military sites, therefore Security Clearance is required and is a condition of employment. NG Bailey will support with this application if you are eligible. Some of the key deliverables in this role will include: Cost / stock awareness: Ensure material control and maintain records of deliveries and project stock Weekly Reviews: Ensure provision of timely and accurate internal and customer project reporting (timesheets, mileage returns, daily reports, completion certificates) Technical: Ensure Service and Projects installation meets internal and client specifications and statutory requirements Completing red line drawings (desirable) Electrical experience (desirable) Willing to be part of an on-call rota Willing to travel and work away from Home Location in the UK and Overseas Willingness to undergo Security Clearance - Mandatory What we are looking for: Knowledge of MoD standards Evident experience working within 'Live' Customer sites Evident experience of the installation of Structured and Voice Cabling Systems Fully conversant with the setup and operation of Fluke Analysers The ability to locate and rectify faults on structured cabling systems Ability to work from construction drawings Demonstrate the ability to interface with customers with a professional and informative approach Qualifications Required Driving Licence (E) Security Clearance (A) UKATA (CAT A) Asbestos Awareness (A) CSCS/ ECS Card in appropriate trade (A) Manual Handling (A) Working at Height (A) Working on Ladders/ stepladders (A) IOSH Working Safely (A) PASMA/IPAF (A) Certified Network Cable Installer (CNCI) Accreditation (A) Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us: We are one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward-thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies. Progression is something we value, and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be.
04/10/2025
Full time
Structured Cabling Data Engineer Plymouth (On Site) Permanent Summary NG Bailey IT Services are currently recruiting a Structured Cabling Data Engineer / Managed Services Engineer who will be responsible for the installation and fault finding of Structured and Voice Cabling systems and are delivered within NG Bailey's clients Service Level Agreements (SLA). The Data Engineer will have experience of the installation and fault finding of Structured and Voice Cabling systems and preferably hold the CNCI (Certified Network Cable Installer) qualification. You will be responsible for responding to any of our managed service contract break fix requests as per the contract SLA's. It will be desirable to have experience as a service engineer of Electronic IP Security Systems. This position is working across military sites, therefore Security Clearance is required and is a condition of employment. NG Bailey will support with this application if you are eligible. Some of the key deliverables in this role will include: Cost / stock awareness: Ensure material control and maintain records of deliveries and project stock Weekly Reviews: Ensure provision of timely and accurate internal and customer project reporting (timesheets, mileage returns, daily reports, completion certificates) Technical: Ensure Service and Projects installation meets internal and client specifications and statutory requirements Completing red line drawings (desirable) Electrical experience (desirable) Willing to be part of an on-call rota Willing to travel and work away from Home Location in the UK and Overseas Willingness to undergo Security Clearance - Mandatory What we are looking for: Knowledge of MoD standards Evident experience working within 'Live' Customer sites Evident experience of the installation of Structured and Voice Cabling Systems Fully conversant with the setup and operation of Fluke Analysers The ability to locate and rectify faults on structured cabling systems Ability to work from construction drawings Demonstrate the ability to interface with customers with a professional and informative approach Qualifications Required Driving Licence (E) Security Clearance (A) UKATA (CAT A) Asbestos Awareness (A) CSCS/ ECS Card in appropriate trade (A) Manual Handling (A) Working at Height (A) Working on Ladders/ stepladders (A) IOSH Working Safely (A) PASMA/IPAF (A) Certified Network Cable Installer (CNCI) Accreditation (A) Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us: We are one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward-thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies. Progression is something we value, and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be.
Junior Cabling Engineer Location: Candidate will be based near Milton Keynes / Luton Job Type: Full-Time, Permanent Salary: £28,000-£30,000 Overtime Opportunities Are you a Junior Cabling Engineer based in Milton Keynes or Luton?This is a fantastic opportunity to join a professional and motivated team delivering high-quality structured cabling and network solutions across the UK. ? What You'll Do Install and terminate data/network cabling across multiple categories Perform cable pulls and installations to industry standards Read and follow technical drawings and documentation Install containment systems and network cabinets Assist with cable testing and certification Document work and help maintain project records Support senior engineers on larger projects What You'll Need Basic understanding of structured cabling systems Familiarity with different cable types and standards Ability to interpret technical instructions Manual dexterity and good hand-eye coordination Awareness of basic health & safety principles Attention to detail and pride in quality work Strong communicator with a team-first attitude Problem-solving mindset and willingness to adapt Nice to Have Valid CSCS or ECS card Entry-level experience with cable installation tools Basic IT/networking knowledge Understanding of cable standards and protocols
02/10/2025
Full time
Junior Cabling Engineer Location: Candidate will be based near Milton Keynes / Luton Job Type: Full-Time, Permanent Salary: £28,000-£30,000 Overtime Opportunities Are you a Junior Cabling Engineer based in Milton Keynes or Luton?This is a fantastic opportunity to join a professional and motivated team delivering high-quality structured cabling and network solutions across the UK. ? What You'll Do Install and terminate data/network cabling across multiple categories Perform cable pulls and installations to industry standards Read and follow technical drawings and documentation Install containment systems and network cabinets Assist with cable testing and certification Document work and help maintain project records Support senior engineers on larger projects What You'll Need Basic understanding of structured cabling systems Familiarity with different cable types and standards Ability to interpret technical instructions Manual dexterity and good hand-eye coordination Awareness of basic health & safety principles Attention to detail and pride in quality work Strong communicator with a team-first attitude Problem-solving mindset and willingness to adapt Nice to Have Valid CSCS or ECS card Entry-level experience with cable installation tools Basic IT/networking knowledge Understanding of cable standards and protocols
Junior Cabling Engineer Location: Candidate will be based near Milton Keynes / Luton Job Type: Full-Time, Permanent Salary: £28,000-£30,000 Overtime Opportunities Are you a Junior Cabling Engineer based in Milton Keynes or Luton?This is a fantastic opportunity to join a professional and motivated team delivering high-quality structured cabling and network solutions across the UK. ? What You'll Do Install and terminate data/network cabling across multiple categories Perform cable pulls and installations to industry standards Read and follow technical drawings and documentation Install containment systems and network cabinets Assist with cable testing and certification Document work and help maintain project records Support senior engineers on larger projects What You'll Need Basic understanding of structured cabling systems Familiarity with different cable types and standards Ability to interpret technical instructions Manual dexterity and good hand-eye coordination Awareness of basic health & safety principles Attention to detail and pride in quality work Strong communicator with a team-first attitude Problem-solving mindset and willingness to adapt Nice to Have Valid CSCS or ECS card Entry-level experience with cable installation tools Basic IT/networking knowledge Understanding of cable standards and protocols
02/10/2025
Full time
Junior Cabling Engineer Location: Candidate will be based near Milton Keynes / Luton Job Type: Full-Time, Permanent Salary: £28,000-£30,000 Overtime Opportunities Are you a Junior Cabling Engineer based in Milton Keynes or Luton?This is a fantastic opportunity to join a professional and motivated team delivering high-quality structured cabling and network solutions across the UK. ? What You'll Do Install and terminate data/network cabling across multiple categories Perform cable pulls and installations to industry standards Read and follow technical drawings and documentation Install containment systems and network cabinets Assist with cable testing and certification Document work and help maintain project records Support senior engineers on larger projects What You'll Need Basic understanding of structured cabling systems Familiarity with different cable types and standards Ability to interpret technical instructions Manual dexterity and good hand-eye coordination Awareness of basic health & safety principles Attention to detail and pride in quality work Strong communicator with a team-first attitude Problem-solving mindset and willingness to adapt Nice to Have Valid CSCS or ECS card Entry-level experience with cable installation tools Basic IT/networking knowledge Understanding of cable standards and protocols
Cabling Engineer - Day Rate Contract We're seeking an experienced Cabling Engineer to join a IT Services team. You'll have proven skills in copper (Cat5e-Cat7) and fibre optic cabling, with hands-on experience in installation, termination, testing, and certification. Expertise in structured cabling and fibre networks is essential, while experience with fusion splicing and the Fluke DSX-8000 CableAnalyzer will be a strong advantage. Responsibilities of the Cabling Engineer: Install, terminate, and test cabling systems (Cat5e, Cat6, Cat6a, Cat7). Install, route, and manage fibre optic cabling (singlemode and multimode). Perform fusion splicing and/or pre-terminated patching, depending on project requirements. Carry out testing and certification using a Fluke DSX8000 CableAnalyzer, producing accurate reports. Conduct site surveys and assist with cabling design/route planning where required. Work in varied environments including data centres, offices, and industrial sites. Ensure installations meet industry standards and client specifications. Adhere to all health and safety protocols (CSCS/ECS, IPAF, PASMA as applicable). Collaborate with project managers, site supervisors, and client representatives. Requirements of the Cabling Engineer: Must have proven experience in structured cabling installation (Cat5e-Cat7). Hands-on experience with fibre optic cabling: installation, splicing, and patching. Competency with fusion splicing equipment and fibre termination methods. Skilled in using Fluke DSX8000 or similar testers for copper/fibre certification. Strong understanding of network cabling standards and best practices. Ability to interpret site drawings, floorplans, and technical documentation. Valid CSCS/ECS card (essential for most UK sites). Asbestos Awareness Training course. Additional H&S certifications (IPAF, PASMA, Working at Heights) desirable. The successful Cabling Engineer must have a Full UK driving licence and willingness to travel to multiple sites. How to Apply To discuss this exciting opportunity in more detail, please APPLY NOW for a no obligation chat with your VIQU Consultant. Additionally, you can contact Matt Farrell, by exploring the VIQU IT Recruitment website . If you know someone who would be ideal for this role, by way of showing our appreciation, VIQU is offering an introduction fee up to £1,000 once your referral has successfully started work with our client (terms apply).
01/10/2025
Contractor
Cabling Engineer - Day Rate Contract We're seeking an experienced Cabling Engineer to join a IT Services team. You'll have proven skills in copper (Cat5e-Cat7) and fibre optic cabling, with hands-on experience in installation, termination, testing, and certification. Expertise in structured cabling and fibre networks is essential, while experience with fusion splicing and the Fluke DSX-8000 CableAnalyzer will be a strong advantage. Responsibilities of the Cabling Engineer: Install, terminate, and test cabling systems (Cat5e, Cat6, Cat6a, Cat7). Install, route, and manage fibre optic cabling (singlemode and multimode). Perform fusion splicing and/or pre-terminated patching, depending on project requirements. Carry out testing and certification using a Fluke DSX8000 CableAnalyzer, producing accurate reports. Conduct site surveys and assist with cabling design/route planning where required. Work in varied environments including data centres, offices, and industrial sites. Ensure installations meet industry standards and client specifications. Adhere to all health and safety protocols (CSCS/ECS, IPAF, PASMA as applicable). Collaborate with project managers, site supervisors, and client representatives. Requirements of the Cabling Engineer: Must have proven experience in structured cabling installation (Cat5e-Cat7). Hands-on experience with fibre optic cabling: installation, splicing, and patching. Competency with fusion splicing equipment and fibre termination methods. Skilled in using Fluke DSX8000 or similar testers for copper/fibre certification. Strong understanding of network cabling standards and best practices. Ability to interpret site drawings, floorplans, and technical documentation. Valid CSCS/ECS card (essential for most UK sites). Asbestos Awareness Training course. Additional H&S certifications (IPAF, PASMA, Working at Heights) desirable. The successful Cabling Engineer must have a Full UK driving licence and willingness to travel to multiple sites. How to Apply To discuss this exciting opportunity in more detail, please APPLY NOW for a no obligation chat with your VIQU Consultant. Additionally, you can contact Matt Farrell, by exploring the VIQU IT Recruitment website . If you know someone who would be ideal for this role, by way of showing our appreciation, VIQU is offering an introduction fee up to £1,000 once your referral has successfully started work with our client (terms apply).
VMware Engineer - Must have a valid DV Clearance We are seeking a VMware Engineer to join an established deployment team working on a major hardware roll-out for a large government account. You will play a key part in the configuration and deployment of ESX devices as part of a wider infrastructure programme. Key Responsibilities: Build and configure VMware ESX hosts according to detailed build guides within a project deployment environment. Install hardware on-site, including racking and cabling activities as required. Provide remote support during hardware testing phases to assist with technical validation. Engage with internal service teams to ensure successful handover and support of newly deployed hardware. Deliver regular updates on progress and issues to the Project Manager and team leads. Support occasional out-of-hours work due to the nature of customer operations. Essential Skills & Experience: Demonstrated experience as an Infrastructure Engineer in project-based environments, particularly building from structured documentation. Solid technical background across enterprise infrastructure, including strong VMware/vSphere experience. Comfortable working independently with minimal supervision, proactively resolving issues and identifying root causes. Strong collaboration and interpersonal skills, with a proven ability to work effectively within technical teams and with wider stakeholders. Clear and professional communication skills, both written and verbal. Excellent attention to detail and ability to follow process and documentation precisely. Previous experience working with large government clients or in secure environments. Positive, can-do attitude with a solution-focused mindset. This is a fantastic opportunity for a motivated and technically capable engineer to contribute to a high-impact government infrastructure programme. You'll be working alongside skilled professionals in a secure environment, helping to deliver mission-critical solutions.
27/08/2025
Contractor
VMware Engineer - Must have a valid DV Clearance We are seeking a VMware Engineer to join an established deployment team working on a major hardware roll-out for a large government account. You will play a key part in the configuration and deployment of ESX devices as part of a wider infrastructure programme. Key Responsibilities: Build and configure VMware ESX hosts according to detailed build guides within a project deployment environment. Install hardware on-site, including racking and cabling activities as required. Provide remote support during hardware testing phases to assist with technical validation. Engage with internal service teams to ensure successful handover and support of newly deployed hardware. Deliver regular updates on progress and issues to the Project Manager and team leads. Support occasional out-of-hours work due to the nature of customer operations. Essential Skills & Experience: Demonstrated experience as an Infrastructure Engineer in project-based environments, particularly building from structured documentation. Solid technical background across enterprise infrastructure, including strong VMware/vSphere experience. Comfortable working independently with minimal supervision, proactively resolving issues and identifying root causes. Strong collaboration and interpersonal skills, with a proven ability to work effectively within technical teams and with wider stakeholders. Clear and professional communication skills, both written and verbal. Excellent attention to detail and ability to follow process and documentation precisely. Previous experience working with large government clients or in secure environments. Positive, can-do attitude with a solution-focused mindset. This is a fantastic opportunity for a motivated and technically capable engineer to contribute to a high-impact government infrastructure programme. You'll be working alongside skilled professionals in a secure environment, helping to deliver mission-critical solutions.
About the opportunity: Our Cities and Places business offers solutions across a full spectrum of services including urban development, architecture, structures and civils, building services and interior design. Within Cities and Places we are developing places for the future and integrating the smart, connected and secure architecture to facilitate future technology and the benefits it brings as we help our clients find new solutions. This opportunity is to guide and support clients through the development of technical telecoms and electronic security solutions. You will be producing technical architecture and specifications within multi-disciplinary teams. Alongside project delivery and project management, work will include client engagement and bidding. You'll be working with a dynamic team in the delivery of innovative designs and costings to demanding project timescales, requiring a sharp customer focus in a competitive marketplace. Principal role accountabilities: Supporting the design/technical lead for allocated projects, undertake the production of designs for projects and proposals, ensuring the proposed design conforms to approved standards, specifications, and safety requirements. Production and checking of work package documentation for projects with a right first-time quality culture. Production of costings for design solutions ensuring that compliant solutions at least cost are identified. Drive the development of innovation in our technical solutions for our clients, to meet their greatest challenges. Work closely with all stakeholders to provide detailed input to specific project programs ensuring innovation and technical excellence are effectively delivered to meet client needs. Work closely with the Project Managers, Planners and Cost Consultants to provide detailed input to specific project programs. Assist or lead in the role of Designer as identified in the CDM regulations, with particular attention to design risks following best practice risk elimination, management and control A full understanding of the design / application of telecoms and security systems and installations used within the built environment and transportation service sectors and the associated safety requirements. Telecoms Structured cabling solutions for Voice and Data services (fibre and copper); Comms room design including cabinet arrangement and population; IP telephony; PABX installations (digital and IP); Radio system installations (PMR and DMR); Power supply systems including PDU and UPS; Mobile telephony and DAS installations; Intercom systems; Public Address (including EPA) and Mass Notification systems, and the requirements of safety concepts in system and equipment design. In addition, the above the ideal candidate will have an ability to: Delivers solutions; Be customer focused; Be a complex problem solver; Have a strategic mindset; Have excellent Interpersonal, communication and influencing skills; Have situational adaptability and be self-motivated; Be resilient; A passion for innovation and technical excellence; A Global Mindset and demonstrated ability to work across cultures and remotely with our Global Integrated Delivery teams; Qualifications & Experience: Essential Excellent communication skills. Degree/HNC or relevant experience. BPSS Preferred Proficient in the use of CAD and 3D design software (e.g. AutoCAD, Revit, MicroStation and BIM) Chartered Engineer or working toward it. Holding of a professional qualification in security design Staff management and supervision experience SC or DV Security Clearance A good understanding of the application of Project Management techniques and contractual conditions An understanding of the Role of the Designer in the application of the CDM regulations Why Jacobs? We clear the way for inventive thinking, so you have the support, means and space to deliver the boldest solutions for the extraordinary and every day. Jacobs. A world where you can. Our Culture: We're invested in you and your success. Our values stand on a foundation of safety, integrity, inclusion and diversity. We put people at the heart of our business and we truly believe that by supporting one another through our culture of caring, we all succeed. We value positive mental health and a sense of belonging for all employees. We aim to make inclusion and diversity core attributes of our identity, embedded in all our employment and business practices in all locations. We know that if we are inclusive, we're more connected, and if we are diverse, we're more creative. Jacobs partners with VERCIDA to help us attract and retain diverse talent. For greater online accessibility please visit to view and access our roles. As a Disability Confident employer, we will interview all disabled applicants who meet the minimum criteria for a vacancy. We welcome applications from candidates who are seeking flexible working and from those who may not meet all the listed requirements for a role. If you have any queries regarding the application process, please contact the team here . Successful candidates will be asked to complete a Baseline Personnel Security Standard Pre-Employment check and will be required to undergo various checks including: Identity, Right to Work; Employment/Education History and Criminal Record. If you are unable to meet this and any associated criteria, then your employment may be delayed or rejected.
01/02/2022
Full time
About the opportunity: Our Cities and Places business offers solutions across a full spectrum of services including urban development, architecture, structures and civils, building services and interior design. Within Cities and Places we are developing places for the future and integrating the smart, connected and secure architecture to facilitate future technology and the benefits it brings as we help our clients find new solutions. This opportunity is to guide and support clients through the development of technical telecoms and electronic security solutions. You will be producing technical architecture and specifications within multi-disciplinary teams. Alongside project delivery and project management, work will include client engagement and bidding. You'll be working with a dynamic team in the delivery of innovative designs and costings to demanding project timescales, requiring a sharp customer focus in a competitive marketplace. Principal role accountabilities: Supporting the design/technical lead for allocated projects, undertake the production of designs for projects and proposals, ensuring the proposed design conforms to approved standards, specifications, and safety requirements. Production and checking of work package documentation for projects with a right first-time quality culture. Production of costings for design solutions ensuring that compliant solutions at least cost are identified. Drive the development of innovation in our technical solutions for our clients, to meet their greatest challenges. Work closely with all stakeholders to provide detailed input to specific project programs ensuring innovation and technical excellence are effectively delivered to meet client needs. Work closely with the Project Managers, Planners and Cost Consultants to provide detailed input to specific project programs. Assist or lead in the role of Designer as identified in the CDM regulations, with particular attention to design risks following best practice risk elimination, management and control A full understanding of the design / application of telecoms and security systems and installations used within the built environment and transportation service sectors and the associated safety requirements. Telecoms Structured cabling solutions for Voice and Data services (fibre and copper); Comms room design including cabinet arrangement and population; IP telephony; PABX installations (digital and IP); Radio system installations (PMR and DMR); Power supply systems including PDU and UPS; Mobile telephony and DAS installations; Intercom systems; Public Address (including EPA) and Mass Notification systems, and the requirements of safety concepts in system and equipment design. In addition, the above the ideal candidate will have an ability to: Delivers solutions; Be customer focused; Be a complex problem solver; Have a strategic mindset; Have excellent Interpersonal, communication and influencing skills; Have situational adaptability and be self-motivated; Be resilient; A passion for innovation and technical excellence; A Global Mindset and demonstrated ability to work across cultures and remotely with our Global Integrated Delivery teams; Qualifications & Experience: Essential Excellent communication skills. Degree/HNC or relevant experience. BPSS Preferred Proficient in the use of CAD and 3D design software (e.g. AutoCAD, Revit, MicroStation and BIM) Chartered Engineer or working toward it. Holding of a professional qualification in security design Staff management and supervision experience SC or DV Security Clearance A good understanding of the application of Project Management techniques and contractual conditions An understanding of the Role of the Designer in the application of the CDM regulations Why Jacobs? We clear the way for inventive thinking, so you have the support, means and space to deliver the boldest solutions for the extraordinary and every day. Jacobs. A world where you can. Our Culture: We're invested in you and your success. Our values stand on a foundation of safety, integrity, inclusion and diversity. We put people at the heart of our business and we truly believe that by supporting one another through our culture of caring, we all succeed. We value positive mental health and a sense of belonging for all employees. We aim to make inclusion and diversity core attributes of our identity, embedded in all our employment and business practices in all locations. We know that if we are inclusive, we're more connected, and if we are diverse, we're more creative. Jacobs partners with VERCIDA to help us attract and retain diverse talent. For greater online accessibility please visit to view and access our roles. As a Disability Confident employer, we will interview all disabled applicants who meet the minimum criteria for a vacancy. We welcome applications from candidates who are seeking flexible working and from those who may not meet all the listed requirements for a role. If you have any queries regarding the application process, please contact the team here . Successful candidates will be asked to complete a Baseline Personnel Security Standard Pre-Employment check and will be required to undergo various checks including: Identity, Right to Work; Employment/Education History and Criminal Record. If you are unable to meet this and any associated criteria, then your employment may be delayed or rejected.
About the opportunity: Our Cities and Places business offers solutions across a full spectrum of services including urban development, architecture, structures and civils, building services and interior design. Within Cities and Places we are developing places for the future and integrating the smart, connected and secure architecture to facilitate future technology and the benefits it brings as we help our clients find new solutions. This opportunity is to guide and support clients through the development of technical telecoms and electronic security solutions. You will be a design leader producing technical architecture and specifications within multi-disciplinary teams. Alongside project delivery and project management, work will include client engagement and bidding. You'll be working with a dynamic team in the delivery of innovative designs and costings to demanding project timescales, requiring a sharp customer focus in a competitive marketplace. Principal role accountabilities: As Design/Technical lead for allocated projects, undertake the production of designs for projects and proposals, ensuring the proposed design conforms to approved standards, specifications, and safety requirements. Production and checking of work package documentation for projects with a right first-time quality culture. Production of costings for design solutions ensuring that compliant solutions at least cost are identified. Drive the development of innovation in our technical solutions for our clients, to meet their greatest challenges. Work closely with all stakeholders to provide detailed input to specific project programs ensuring innovation and technical excellence are effectively delivered to meet client needs. Work closely with the Project Managers, Planners and Cost Consultants to provide detailed input to specific project programs. Assist or lead in the role of Designer as identified in the CDM regulations, with particular attention to design risks following best practice risk elimination, management and control A full understanding of the design / application of telecoms and security systems and installations used within the built environment and transportation service sectors and the associated safety requirements. Telecoms Structured cabling solutions for Voice and Data services (fibre and copper); Comms room design including cabinet arrangement and population; IP telephony; PABX installations (digital and IP); Radio system installations (PMR and DMR); Power supply systems including PDU and UPS; Mobile telephony and DAS installations; Intercom systems; Public Address (including EPA) and Mass Notification systems, and the requirements of safety concepts in system and equipment design. Security Closed Circuit Television (CCTV) Installations; ANPR and Video Analytics; Electronic Access Control Systems, including use of Biometric technology; Intruder Detection Systems; Volumetric detection technologies; Perimeter Security and PIDS; Power supply systems including PDU and UPS; Radio signalling systems Physical security installations Vehicle and pedestrian control systems Personnel tracking systems and beacon technology, and the requirements of safety concepts in system and equipment design. In addition, the above the ideal candidate will have an ability to: Delivers solutions; Be customer focused; Be a complex problem solver; Have a strategic mindset; Have excellent Interpersonal, communication and influencing skills; Have situational adaptability and be self-motivated; Be resilient; A passion for innovation and technical excellence; A Global Mindset and demonstrated ability to work across cultures and remotely with our Global Integrated Delivery teams; Qualifications & Experience: Essential Excellent communication skills. Degree/HNC or relevant experience. BPSS Preferred Proficient in the use of CAD and 3D design software (e.g. AutoCAD, Revit, MicroStation and BIM) Chartered Engineer or working toward it. Holding of a professional qualification in security design Staff management and supervision experience SC or DV Security Clearance A good understanding of the application of Project Management techniques and contractual conditions An understanding of the Role of the Designer in the application of the CDM regulations Why Jacobs? We clear the way for inventive thinking, so you have the support, means and space to deliver the boldest solutions for the extraordinary and every day. Jacobs. A world where you can. Our Culture: We're invested in you and your success. Our values stand on a foundation of safety, integrity, inclusion and diversity. We put people at the heart of our business and we truly believe that by supporting one another through our culture of caring, we all succeed. We value positive mental health and a sense of belonging for all employees. We aim to make inclusion and diversity core attributes of our identity, embedded in all our employment and business practices in all locations. We know that if we are inclusive, we're more connected, and if we are diverse, we're more creative. Jacobs partners with VERCIDA to help us attract and retain diverse talent. For greater online accessibility please visit to view and access our roles. As a Disability Confident employer, we will interview all disabled applicants who meet the minimum criteria for a vacancy. We welcome applications from candidates who are seeking flexible working and from those who may not meet all the listed requirements for a role. If you have any queries regarding the application process, please contact the team here . Successful candidates will be asked to complete a Baseline Personnel Security Standard Pre-Employment check and will be required to undergo various checks including: Identity, Right to Work; Employment/Education History and Criminal Record. If you are unable to meet this and any associated criteria, then your employment may be delayed or rejected.
01/02/2022
Full time
About the opportunity: Our Cities and Places business offers solutions across a full spectrum of services including urban development, architecture, structures and civils, building services and interior design. Within Cities and Places we are developing places for the future and integrating the smart, connected and secure architecture to facilitate future technology and the benefits it brings as we help our clients find new solutions. This opportunity is to guide and support clients through the development of technical telecoms and electronic security solutions. You will be a design leader producing technical architecture and specifications within multi-disciplinary teams. Alongside project delivery and project management, work will include client engagement and bidding. You'll be working with a dynamic team in the delivery of innovative designs and costings to demanding project timescales, requiring a sharp customer focus in a competitive marketplace. Principal role accountabilities: As Design/Technical lead for allocated projects, undertake the production of designs for projects and proposals, ensuring the proposed design conforms to approved standards, specifications, and safety requirements. Production and checking of work package documentation for projects with a right first-time quality culture. Production of costings for design solutions ensuring that compliant solutions at least cost are identified. Drive the development of innovation in our technical solutions for our clients, to meet their greatest challenges. Work closely with all stakeholders to provide detailed input to specific project programs ensuring innovation and technical excellence are effectively delivered to meet client needs. Work closely with the Project Managers, Planners and Cost Consultants to provide detailed input to specific project programs. Assist or lead in the role of Designer as identified in the CDM regulations, with particular attention to design risks following best practice risk elimination, management and control A full understanding of the design / application of telecoms and security systems and installations used within the built environment and transportation service sectors and the associated safety requirements. Telecoms Structured cabling solutions for Voice and Data services (fibre and copper); Comms room design including cabinet arrangement and population; IP telephony; PABX installations (digital and IP); Radio system installations (PMR and DMR); Power supply systems including PDU and UPS; Mobile telephony and DAS installations; Intercom systems; Public Address (including EPA) and Mass Notification systems, and the requirements of safety concepts in system and equipment design. Security Closed Circuit Television (CCTV) Installations; ANPR and Video Analytics; Electronic Access Control Systems, including use of Biometric technology; Intruder Detection Systems; Volumetric detection technologies; Perimeter Security and PIDS; Power supply systems including PDU and UPS; Radio signalling systems Physical security installations Vehicle and pedestrian control systems Personnel tracking systems and beacon technology, and the requirements of safety concepts in system and equipment design. In addition, the above the ideal candidate will have an ability to: Delivers solutions; Be customer focused; Be a complex problem solver; Have a strategic mindset; Have excellent Interpersonal, communication and influencing skills; Have situational adaptability and be self-motivated; Be resilient; A passion for innovation and technical excellence; A Global Mindset and demonstrated ability to work across cultures and remotely with our Global Integrated Delivery teams; Qualifications & Experience: Essential Excellent communication skills. Degree/HNC or relevant experience. BPSS Preferred Proficient in the use of CAD and 3D design software (e.g. AutoCAD, Revit, MicroStation and BIM) Chartered Engineer or working toward it. Holding of a professional qualification in security design Staff management and supervision experience SC or DV Security Clearance A good understanding of the application of Project Management techniques and contractual conditions An understanding of the Role of the Designer in the application of the CDM regulations Why Jacobs? We clear the way for inventive thinking, so you have the support, means and space to deliver the boldest solutions for the extraordinary and every day. Jacobs. A world where you can. Our Culture: We're invested in you and your success. Our values stand on a foundation of safety, integrity, inclusion and diversity. We put people at the heart of our business and we truly believe that by supporting one another through our culture of caring, we all succeed. We value positive mental health and a sense of belonging for all employees. We aim to make inclusion and diversity core attributes of our identity, embedded in all our employment and business practices in all locations. We know that if we are inclusive, we're more connected, and if we are diverse, we're more creative. Jacobs partners with VERCIDA to help us attract and retain diverse talent. For greater online accessibility please visit to view and access our roles. As a Disability Confident employer, we will interview all disabled applicants who meet the minimum criteria for a vacancy. We welcome applications from candidates who are seeking flexible working and from those who may not meet all the listed requirements for a role. If you have any queries regarding the application process, please contact the team here . Successful candidates will be asked to complete a Baseline Personnel Security Standard Pre-Employment check and will be required to undergo various checks including: Identity, Right to Work; Employment/Education History and Criminal Record. If you are unable to meet this and any associated criteria, then your employment may be delayed or rejected.
About the opportunity: Our Cities and Places business offers solutions across a full spectrum of services including urban development, architecture, structures and civils, building services and interior design. Within Cities and Places we are developing places for the future and integrating the smart, connected and secure architecture to facilitate future technology and the benefits it brings as we help our clients find new solutions. This opportunity is to guide and support clients through the development of technical telecoms and electronic security solutions. You will be a design leader producing technical architecture and specifications within multi-disciplinary teams. Alongside project delivery and project management, work will include client engagement and bidding. You'll be working with a dynamic team in the delivery of innovative designs and costings to demanding project timescales, requiring a sharp customer focus in a competitive marketplace. Principal role accountabilities: As Design/Technical lead for allocated projects, undertake the production of designs for projects and proposals, ensuring the proposed design conforms to approved standards, specifications, and safety requirements. Production and checking of work package documentation for projects with a right first-time quality culture. Production of costings for design solutions ensuring that compliant solutions at least cost are identified. Drive the development of innovation in our technical solutions for our clients, to meet their greatest challenges. Work closely with all stakeholders to provide detailed input to specific project programs ensuring innovation and technical excellence are effectively delivered to meet client needs. Work closely with the Project Managers, Planners and Cost Consultants to provide detailed input to specific project programs. Assist or lead in the role of Designer as identified in the CDM regulations, with particular attention to design risks following best practice risk elimination, management and control A full understanding of the design / application of telecoms and security systems and installations used within the built environment and transportation service sectors and the associated safety requirements. Telecoms Structured cabling solutions for Voice and Data services (fibre and copper); Comms room design including cabinet arrangement and population; IP telephony; PABX installations (digital and IP); Radio system installations (PMR and DMR); Power supply systems including PDU and UPS; Mobile telephony and DAS installations; Intercom systems; Public Address (including EPA) and Mass Notification systems, and the requirements of safety concepts in system and equipment design. Security Closed Circuit Television (CCTV) Installations; ANPR and Video Analytics; Electronic Access Control Systems, including use of Biometric technology; Intruder Detection Systems; Volumetric detection technologies; Perimeter Security and PIDS; Power supply systems including PDU and UPS; Radio signalling systems Physical security installations Vehicle and pedestrian control systems Personnel tracking systems and beacon technology, and the requirements of safety concepts in system and equipment design. In addition, the above the ideal candidate will have an ability to: Delivers solutions; Be customer focused; Be a complex problem solver; Have a strategic mindset; Have excellent Interpersonal, communication and influencing skills; Have situational adaptability and be self-motivated; Be resilient; A passion for innovation and technical excellence; A Global Mindset and demonstrated ability to work across cultures and remotely with our Global Integrated Delivery teams; Qualifications & Experience: Essential Excellent communication skills. Degree/HNC or relevant experience. BPSS Preferred Proficient in the use of CAD and 3D design software (e.g. AutoCAD, Revit, MicroStation and BIM) Chartered Engineer or working toward it. Holding of a professional qualification in security design Staff management and supervision experience SC or DV Security Clearance A good understanding of the application of Project Management techniques and contractual conditions An understanding of the Role of the Designer in the application of the CDM regulations Why Jacobs? We clear the way for inventive thinking, so you have the support, means and space to deliver the boldest solutions for the extraordinary and every day. Jacobs. A world where you can. Our Culture: We're invested in you and your success. Our values stand on a foundation of safety, integrity, inclusion and diversity. We put people at the heart of our business and we truly believe that by supporting one another through our culture of caring, we all succeed. We value positive mental health and a sense of belonging for all employees. We aim to make inclusion and diversity core attributes of our identity, embedded in all our employment and business practices in all locations. We know that if we are inclusive, we're more connected, and if we are diverse, we're more creative. Jacobs partners with VERCIDA to help us attract and retain diverse talent. For greater online accessibility please visit to view and access our roles. As a Disability Confident employer, we will interview all disabled applicants who meet the minimum criteria for a vacancy. We welcome applications from candidates who are seeking flexible working and from those who may not meet all the listed requirements for a role. If you have any queries regarding the application process, please contact the team here . Successful candidates will be asked to complete a Baseline Personnel Security Standard Pre-Employment check and will be required to undergo various checks including: Identity, Right to Work; Employment/Education History and Criminal Record. If you are unable to meet this and any associated criteria, then your employment may be delayed or rejected.
01/02/2022
Full time
About the opportunity: Our Cities and Places business offers solutions across a full spectrum of services including urban development, architecture, structures and civils, building services and interior design. Within Cities and Places we are developing places for the future and integrating the smart, connected and secure architecture to facilitate future technology and the benefits it brings as we help our clients find new solutions. This opportunity is to guide and support clients through the development of technical telecoms and electronic security solutions. You will be a design leader producing technical architecture and specifications within multi-disciplinary teams. Alongside project delivery and project management, work will include client engagement and bidding. You'll be working with a dynamic team in the delivery of innovative designs and costings to demanding project timescales, requiring a sharp customer focus in a competitive marketplace. Principal role accountabilities: As Design/Technical lead for allocated projects, undertake the production of designs for projects and proposals, ensuring the proposed design conforms to approved standards, specifications, and safety requirements. Production and checking of work package documentation for projects with a right first-time quality culture. Production of costings for design solutions ensuring that compliant solutions at least cost are identified. Drive the development of innovation in our technical solutions for our clients, to meet their greatest challenges. Work closely with all stakeholders to provide detailed input to specific project programs ensuring innovation and technical excellence are effectively delivered to meet client needs. Work closely with the Project Managers, Planners and Cost Consultants to provide detailed input to specific project programs. Assist or lead in the role of Designer as identified in the CDM regulations, with particular attention to design risks following best practice risk elimination, management and control A full understanding of the design / application of telecoms and security systems and installations used within the built environment and transportation service sectors and the associated safety requirements. Telecoms Structured cabling solutions for Voice and Data services (fibre and copper); Comms room design including cabinet arrangement and population; IP telephony; PABX installations (digital and IP); Radio system installations (PMR and DMR); Power supply systems including PDU and UPS; Mobile telephony and DAS installations; Intercom systems; Public Address (including EPA) and Mass Notification systems, and the requirements of safety concepts in system and equipment design. Security Closed Circuit Television (CCTV) Installations; ANPR and Video Analytics; Electronic Access Control Systems, including use of Biometric technology; Intruder Detection Systems; Volumetric detection technologies; Perimeter Security and PIDS; Power supply systems including PDU and UPS; Radio signalling systems Physical security installations Vehicle and pedestrian control systems Personnel tracking systems and beacon technology, and the requirements of safety concepts in system and equipment design. In addition, the above the ideal candidate will have an ability to: Delivers solutions; Be customer focused; Be a complex problem solver; Have a strategic mindset; Have excellent Interpersonal, communication and influencing skills; Have situational adaptability and be self-motivated; Be resilient; A passion for innovation and technical excellence; A Global Mindset and demonstrated ability to work across cultures and remotely with our Global Integrated Delivery teams; Qualifications & Experience: Essential Excellent communication skills. Degree/HNC or relevant experience. BPSS Preferred Proficient in the use of CAD and 3D design software (e.g. AutoCAD, Revit, MicroStation and BIM) Chartered Engineer or working toward it. Holding of a professional qualification in security design Staff management and supervision experience SC or DV Security Clearance A good understanding of the application of Project Management techniques and contractual conditions An understanding of the Role of the Designer in the application of the CDM regulations Why Jacobs? We clear the way for inventive thinking, so you have the support, means and space to deliver the boldest solutions for the extraordinary and every day. Jacobs. A world where you can. Our Culture: We're invested in you and your success. Our values stand on a foundation of safety, integrity, inclusion and diversity. We put people at the heart of our business and we truly believe that by supporting one another through our culture of caring, we all succeed. We value positive mental health and a sense of belonging for all employees. We aim to make inclusion and diversity core attributes of our identity, embedded in all our employment and business practices in all locations. We know that if we are inclusive, we're more connected, and if we are diverse, we're more creative. Jacobs partners with VERCIDA to help us attract and retain diverse talent. For greater online accessibility please visit to view and access our roles. As a Disability Confident employer, we will interview all disabled applicants who meet the minimum criteria for a vacancy. We welcome applications from candidates who are seeking flexible working and from those who may not meet all the listed requirements for a role. If you have any queries regarding the application process, please contact the team here . Successful candidates will be asked to complete a Baseline Personnel Security Standard Pre-Employment check and will be required to undergo various checks including: Identity, Right to Work; Employment/Education History and Criminal Record. If you are unable to meet this and any associated criteria, then your employment may be delayed or rejected.
About the opportunity: Our Cities and Places business offers solutions across a full spectrum of services including urban development, architecture, structures and civils, building services and interior design. Within Cities and Places we are developing places for the future and integrating the smart, connected and secure architecture to facilitate future technology and the benefits it brings as we help our clients find new solutions. This opportunity is to guide and support clients through the development of technical telecoms and electronic security solutions. You will be producing technical architecture and specifications within multi-disciplinary teams. Alongside project delivery and project management, work will include client engagement and bidding. You'll be working with a dynamic team in the delivery of innovative designs and costings to demanding project timescales, requiring a sharp customer focus in a competitive marketplace. Principal role accountabilities: Supporting the design/technical lead for allocated projects, undertake the production of designs for projects and proposals, ensuring the proposed design conforms to approved standards, specifications, and safety requirements. Production and checking of work package documentation for projects with a right first-time quality culture. Production of costings for design solutions ensuring that compliant solutions at least cost are identified. Drive the development of innovation in our technical solutions for our clients, to meet their greatest challenges. Work closely with all stakeholders to provide detailed input to specific project programs ensuring innovation and technical excellence are effectively delivered to meet client needs. Work closely with the Project Managers, Planners and Cost Consultants to provide detailed input to specific project programs. Assist or lead in the role of Designer as identified in the CDM regulations, with particular attention to design risks following best practice risk elimination, management and control A full understanding of the design / application of telecoms and security systems and installations used within the built environment and transportation service sectors and the associated safety requirements. Telecoms Structured cabling solutions for Voice and Data services (fibre and copper); Comms room design including cabinet arrangement and population; IP telephony; PABX installations (digital and IP); Radio system installations (PMR and DMR); Power supply systems including PDU and UPS; Mobile telephony and DAS installations; Intercom systems; Public Address (including EPA) and Mass Notification systems, and the requirements of safety concepts in system and equipment design. In addition, the above the ideal candidate will have an ability to: Delivers solutions; Be customer focused; Be a complex problem solver; Have a strategic mindset; Have excellent Interpersonal, communication and influencing skills; Have situational adaptability and be self-motivated; Be resilient; A passion for innovation and technical excellence; A Global Mindset and demonstrated ability to work across cultures and remotely with our Global Integrated Delivery teams; Qualifications & Experience: Essential Excellent communication skills. Degree/HNC or relevant experience. BPSS Preferred Proficient in the use of CAD and 3D design software (e.g. AutoCAD, Revit, MicroStation and BIM) Chartered Engineer or working toward it. Holding of a professional qualification in security design Staff management and supervision experience SC or DV Security Clearance A good understanding of the application of Project Management techniques and contractual conditions An understanding of the Role of the Designer in the application of the CDM regulations Why Jacobs? We clear the way for inventive thinking, so you have the support, means and space to deliver the boldest solutions for the extraordinary and every day. Jacobs. A world where you can. Our Culture: We're invested in you and your success. Our values stand on a foundation of safety, integrity, inclusion and diversity. We put people at the heart of our business and we truly believe that by supporting one another through our culture of caring, we all succeed. We value positive mental health and a sense of belonging for all employees. We aim to make inclusion and diversity core attributes of our identity, embedded in all our employment and business practices in all locations. We know that if we are inclusive, we're more connected, and if we are diverse, we're more creative. Jacobs partners with VERCIDA to help us attract and retain diverse talent. For greater online accessibility please visit to view and access our roles. As a Disability Confident employer, we will interview all disabled applicants who meet the minimum criteria for a vacancy. We welcome applications from candidates who are seeking flexible working and from those who may not meet all the listed requirements for a role. If you have any queries regarding the application process, please contact the team here . Successful candidates will be asked to complete a Baseline Personnel Security Standard Pre-Employment check and will be required to undergo various checks including: Identity, Right to Work; Employment/Education History and Criminal Record. If you are unable to meet this and any associated criteria, then your employment may be delayed or rejected.
01/02/2022
Full time
About the opportunity: Our Cities and Places business offers solutions across a full spectrum of services including urban development, architecture, structures and civils, building services and interior design. Within Cities and Places we are developing places for the future and integrating the smart, connected and secure architecture to facilitate future technology and the benefits it brings as we help our clients find new solutions. This opportunity is to guide and support clients through the development of technical telecoms and electronic security solutions. You will be producing technical architecture and specifications within multi-disciplinary teams. Alongside project delivery and project management, work will include client engagement and bidding. You'll be working with a dynamic team in the delivery of innovative designs and costings to demanding project timescales, requiring a sharp customer focus in a competitive marketplace. Principal role accountabilities: Supporting the design/technical lead for allocated projects, undertake the production of designs for projects and proposals, ensuring the proposed design conforms to approved standards, specifications, and safety requirements. Production and checking of work package documentation for projects with a right first-time quality culture. Production of costings for design solutions ensuring that compliant solutions at least cost are identified. Drive the development of innovation in our technical solutions for our clients, to meet their greatest challenges. Work closely with all stakeholders to provide detailed input to specific project programs ensuring innovation and technical excellence are effectively delivered to meet client needs. Work closely with the Project Managers, Planners and Cost Consultants to provide detailed input to specific project programs. Assist or lead in the role of Designer as identified in the CDM regulations, with particular attention to design risks following best practice risk elimination, management and control A full understanding of the design / application of telecoms and security systems and installations used within the built environment and transportation service sectors and the associated safety requirements. Telecoms Structured cabling solutions for Voice and Data services (fibre and copper); Comms room design including cabinet arrangement and population; IP telephony; PABX installations (digital and IP); Radio system installations (PMR and DMR); Power supply systems including PDU and UPS; Mobile telephony and DAS installations; Intercom systems; Public Address (including EPA) and Mass Notification systems, and the requirements of safety concepts in system and equipment design. In addition, the above the ideal candidate will have an ability to: Delivers solutions; Be customer focused; Be a complex problem solver; Have a strategic mindset; Have excellent Interpersonal, communication and influencing skills; Have situational adaptability and be self-motivated; Be resilient; A passion for innovation and technical excellence; A Global Mindset and demonstrated ability to work across cultures and remotely with our Global Integrated Delivery teams; Qualifications & Experience: Essential Excellent communication skills. Degree/HNC or relevant experience. BPSS Preferred Proficient in the use of CAD and 3D design software (e.g. AutoCAD, Revit, MicroStation and BIM) Chartered Engineer or working toward it. Holding of a professional qualification in security design Staff management and supervision experience SC or DV Security Clearance A good understanding of the application of Project Management techniques and contractual conditions An understanding of the Role of the Designer in the application of the CDM regulations Why Jacobs? We clear the way for inventive thinking, so you have the support, means and space to deliver the boldest solutions for the extraordinary and every day. Jacobs. A world where you can. Our Culture: We're invested in you and your success. Our values stand on a foundation of safety, integrity, inclusion and diversity. We put people at the heart of our business and we truly believe that by supporting one another through our culture of caring, we all succeed. We value positive mental health and a sense of belonging for all employees. We aim to make inclusion and diversity core attributes of our identity, embedded in all our employment and business practices in all locations. We know that if we are inclusive, we're more connected, and if we are diverse, we're more creative. Jacobs partners with VERCIDA to help us attract and retain diverse talent. For greater online accessibility please visit to view and access our roles. As a Disability Confident employer, we will interview all disabled applicants who meet the minimum criteria for a vacancy. We welcome applications from candidates who are seeking flexible working and from those who may not meet all the listed requirements for a role. If you have any queries regarding the application process, please contact the team here . Successful candidates will be asked to complete a Baseline Personnel Security Standard Pre-Employment check and will be required to undergo various checks including: Identity, Right to Work; Employment/Education History and Criminal Record. If you are unable to meet this and any associated criteria, then your employment may be delayed or rejected.
About the opportunity: Our Cities and Places business offers solutions across a full spectrum of services including urban development, architecture, structures and civils, building services and interior design. Within Cities and Places we are developing places for the future and integrating the smart, connected and secure architecture to facilitate future technology and the benefits it brings as we help our clients find new solutions. This opportunity is to guide and support clients through the development of technical telecoms and electronic security solutions. You will be producing technical architecture and specifications within multi-disciplinary teams. Alongside project delivery and project management, work will include client engagement and bidding. You'll be working with a dynamic team in the delivery of innovative designs and costings to demanding project timescales, requiring a sharp customer focus in a competitive marketplace. Principal role accountabilities: Supporting the design/technical lead for allocated projects, undertake the production of designs for projects and proposals, ensuring the proposed design conforms to approved standards, specifications, and safety requirements. Production and checking of work package documentation for projects with a right first-time quality culture. Production of costings for design solutions ensuring that compliant solutions at least cost are identified. Drive the development of innovation in our technical solutions for our clients, to meet their greatest challenges. Work closely with all stakeholders to provide detailed input to specific project programs ensuring innovation and technical excellence are effectively delivered to meet client needs. Work closely with the Project Managers, Planners and Cost Consultants to provide detailed input to specific project programs. Assist or lead in the role of Designer as identified in the CDM regulations, with particular attention to design risks following best practice risk elimination, management and control A full understanding of the design / application of telecoms and security systems and installations used within the built environment and transportation service sectors and the associated safety requirements. Telecoms Structured cabling solutions for Voice and Data services (fibre and copper); Comms room design including cabinet arrangement and population; IP telephony; PABX installations (digital and IP); Radio system installations (PMR and DMR); Power supply systems including PDU and UPS; Mobile telephony and DAS installations; Intercom systems; Public Address (including EPA) and Mass Notification systems, and the requirements of safety concepts in system and equipment design. In addition, the above the ideal candidate will have an ability to: Delivers solutions; Be customer focused; Be a complex problem solver; Have a strategic mindset; Have excellent Interpersonal, communication and influencing skills; Have situational adaptability and be self-motivated; Be resilient; A passion for innovation and technical excellence; A Global Mindset and demonstrated ability to work across cultures and remotely with our Global Integrated Delivery teams; Qualifications & Experience: Essential Excellent communication skills. Degree/HNC or relevant experience. BPSS Preferred Proficient in the use of CAD and 3D design software (e.g. AutoCAD, Revit, MicroStation and BIM) Chartered Engineer or working toward it. Holding of a professional qualification in security design Staff management and supervision experience SC or DV Security Clearance A good understanding of the application of Project Management techniques and contractual conditions An understanding of the Role of the Designer in the application of the CDM regulations Why Jacobs? We clear the way for inventive thinking, so you have the support, means and space to deliver the boldest solutions for the extraordinary and every day. Jacobs. A world where you can. Our Culture: We're invested in you and your success. Our values stand on a foundation of safety, integrity, inclusion and diversity. We put people at the heart of our business and we truly believe that by supporting one another through our culture of caring, we all succeed. We value positive mental health and a sense of belonging for all employees. We aim to make inclusion and diversity core attributes of our identity, embedded in all our employment and business practices in all locations. We know that if we are inclusive, we're more connected, and if we are diverse, we're more creative. Jacobs partners with VERCIDA to help us attract and retain diverse talent. For greater online accessibility please visit to view and access our roles. As a Disability Confident employer, we will interview all disabled applicants who meet the minimum criteria for a vacancy. We welcome applications from candidates who are seeking flexible working and from those who may not meet all the listed requirements for a role. If you have any queries regarding the application process, please contact the team here . Successful candidates will be asked to complete a Baseline Personnel Security Standard Pre-Employment check and will be required to undergo various checks including: Identity, Right to Work; Employment/Education History and Criminal Record. If you are unable to meet this and any associated criteria, then your employment may be delayed or rejected.
01/02/2022
Full time
About the opportunity: Our Cities and Places business offers solutions across a full spectrum of services including urban development, architecture, structures and civils, building services and interior design. Within Cities and Places we are developing places for the future and integrating the smart, connected and secure architecture to facilitate future technology and the benefits it brings as we help our clients find new solutions. This opportunity is to guide and support clients through the development of technical telecoms and electronic security solutions. You will be producing technical architecture and specifications within multi-disciplinary teams. Alongside project delivery and project management, work will include client engagement and bidding. You'll be working with a dynamic team in the delivery of innovative designs and costings to demanding project timescales, requiring a sharp customer focus in a competitive marketplace. Principal role accountabilities: Supporting the design/technical lead for allocated projects, undertake the production of designs for projects and proposals, ensuring the proposed design conforms to approved standards, specifications, and safety requirements. Production and checking of work package documentation for projects with a right first-time quality culture. Production of costings for design solutions ensuring that compliant solutions at least cost are identified. Drive the development of innovation in our technical solutions for our clients, to meet their greatest challenges. Work closely with all stakeholders to provide detailed input to specific project programs ensuring innovation and technical excellence are effectively delivered to meet client needs. Work closely with the Project Managers, Planners and Cost Consultants to provide detailed input to specific project programs. Assist or lead in the role of Designer as identified in the CDM regulations, with particular attention to design risks following best practice risk elimination, management and control A full understanding of the design / application of telecoms and security systems and installations used within the built environment and transportation service sectors and the associated safety requirements. Telecoms Structured cabling solutions for Voice and Data services (fibre and copper); Comms room design including cabinet arrangement and population; IP telephony; PABX installations (digital and IP); Radio system installations (PMR and DMR); Power supply systems including PDU and UPS; Mobile telephony and DAS installations; Intercom systems; Public Address (including EPA) and Mass Notification systems, and the requirements of safety concepts in system and equipment design. In addition, the above the ideal candidate will have an ability to: Delivers solutions; Be customer focused; Be a complex problem solver; Have a strategic mindset; Have excellent Interpersonal, communication and influencing skills; Have situational adaptability and be self-motivated; Be resilient; A passion for innovation and technical excellence; A Global Mindset and demonstrated ability to work across cultures and remotely with our Global Integrated Delivery teams; Qualifications & Experience: Essential Excellent communication skills. Degree/HNC or relevant experience. BPSS Preferred Proficient in the use of CAD and 3D design software (e.g. AutoCAD, Revit, MicroStation and BIM) Chartered Engineer or working toward it. Holding of a professional qualification in security design Staff management and supervision experience SC or DV Security Clearance A good understanding of the application of Project Management techniques and contractual conditions An understanding of the Role of the Designer in the application of the CDM regulations Why Jacobs? We clear the way for inventive thinking, so you have the support, means and space to deliver the boldest solutions for the extraordinary and every day. Jacobs. A world where you can. Our Culture: We're invested in you and your success. Our values stand on a foundation of safety, integrity, inclusion and diversity. We put people at the heart of our business and we truly believe that by supporting one another through our culture of caring, we all succeed. We value positive mental health and a sense of belonging for all employees. We aim to make inclusion and diversity core attributes of our identity, embedded in all our employment and business practices in all locations. We know that if we are inclusive, we're more connected, and if we are diverse, we're more creative. Jacobs partners with VERCIDA to help us attract and retain diverse talent. For greater online accessibility please visit to view and access our roles. As a Disability Confident employer, we will interview all disabled applicants who meet the minimum criteria for a vacancy. We welcome applications from candidates who are seeking flexible working and from those who may not meet all the listed requirements for a role. If you have any queries regarding the application process, please contact the team here . Successful candidates will be asked to complete a Baseline Personnel Security Standard Pre-Employment check and will be required to undergo various checks including: Identity, Right to Work; Employment/Education History and Criminal Record. If you are unable to meet this and any associated criteria, then your employment may be delayed or rejected.
About the opportunity: Our Cities and Places business offers solutions across a full spectrum of services including urban development, architecture, structures and civils, building services and interior design. Within Cities and Places we are developing places for the future and integrating the smart, connected and secure architecture to facilitate future technology and the benefits it brings as we help our clients find new solutions. This opportunity is to guide and support clients through the development of technical telecoms and electronic security solutions. You will be a design leader producing technical architecture and specifications within multi-disciplinary teams. Alongside project delivery and project management, work will include client engagement and bidding. You'll be working with a dynamic team in the delivery of innovative designs and costings to demanding project timescales, requiring a sharp customer focus in a competitive marketplace. Principal role accountabilities: As Design/Technical lead for allocated projects, undertake the production of designs for projects and proposals, ensuring the proposed design conforms to approved standards, specifications, and safety requirements. Production and checking of work package documentation for projects with a right first-time quality culture. Production of costings for design solutions ensuring that compliant solutions at least cost are identified. Drive the development of innovation in our technical solutions for our clients, to meet their greatest challenges. Work closely with all stakeholders to provide detailed input to specific project programs ensuring innovation and technical excellence are effectively delivered to meet client needs. Work closely with the Project Managers, Planners and Cost Consultants to provide detailed input to specific project programs. Assist or lead in the role of Designer as identified in the CDM regulations, with particular attention to design risks following best practice risk elimination, management and control A full understanding of the design / application of telecoms and security systems and installations used within the built environment and transportation service sectors and the associated safety requirements. Telecoms Structured cabling solutions for Voice and Data services (fibre and copper); Comms room design including cabinet arrangement and population; IP telephony; PABX installations (digital and IP); Radio system installations (PMR and DMR); Power supply systems including PDU and UPS; Mobile telephony and DAS installations; Intercom systems; Public Address (including EPA) and Mass Notification systems, and the requirements of safety concepts in system and equipment design. Security Closed Circuit Television (CCTV) Installations; ANPR and Video Analytics; Electronic Access Control Systems, including use of Biometric technology; Intruder Detection Systems; Volumetric detection technologies; Perimeter Security and PIDS; Power supply systems including PDU and UPS; Radio signalling systems Physical security installations Vehicle and pedestrian control systems Personnel tracking systems and beacon technology, and the requirements of safety concepts in system and equipment design. In addition, the above the ideal candidate will have an ability to: Delivers solutions; Be customer focused; Be a complex problem solver; Have a strategic mindset; Have excellent Interpersonal, communication and influencing skills; Have situational adaptability and be self-motivated; Be resilient; A passion for innovation and technical excellence; A Global Mindset and demonstrated ability to work across cultures and remotely with our Global Integrated Delivery teams; Qualifications & Experience: Essential Excellent communication skills. Degree/HNC or relevant experience. BPSS Preferred Proficient in the use of CAD and 3D design software (e.g. AutoCAD, Revit, MicroStation and BIM) Chartered Engineer or working toward it. Holding of a professional qualification in security design Staff management and supervision experience SC or DV Security Clearance A good understanding of the application of Project Management techniques and contractual conditions An understanding of the Role of the Designer in the application of the CDM regulations Why Jacobs? We clear the way for inventive thinking, so you have the support, means and space to deliver the boldest solutions for the extraordinary and every day. Jacobs. A world where you can. Our Culture: We're invested in you and your success. Our values stand on a foundation of safety, integrity, inclusion and diversity. We put people at the heart of our business and we truly believe that by supporting one another through our culture of caring, we all succeed. We value positive mental health and a sense of belonging for all employees. We aim to make inclusion and diversity core attributes of our identity, embedded in all our employment and business practices in all locations. We know that if we are inclusive, we're more connected, and if we are diverse, we're more creative. Jacobs partners with VERCIDA to help us attract and retain diverse talent. For greater online accessibility please visit to view and access our roles. As a Disability Confident employer, we will interview all disabled applicants who meet the minimum criteria for a vacancy. We welcome applications from candidates who are seeking flexible working and from those who may not meet all the listed requirements for a role. If you have any queries regarding the application process, please contact the team here . Successful candidates will be asked to complete a Baseline Personnel Security Standard Pre-Employment check and will be required to undergo various checks including: Identity, Right to Work; Employment/Education History and Criminal Record. If you are unable to meet this and any associated criteria, then your employment may be delayed or rejected.
01/02/2022
Full time
About the opportunity: Our Cities and Places business offers solutions across a full spectrum of services including urban development, architecture, structures and civils, building services and interior design. Within Cities and Places we are developing places for the future and integrating the smart, connected and secure architecture to facilitate future technology and the benefits it brings as we help our clients find new solutions. This opportunity is to guide and support clients through the development of technical telecoms and electronic security solutions. You will be a design leader producing technical architecture and specifications within multi-disciplinary teams. Alongside project delivery and project management, work will include client engagement and bidding. You'll be working with a dynamic team in the delivery of innovative designs and costings to demanding project timescales, requiring a sharp customer focus in a competitive marketplace. Principal role accountabilities: As Design/Technical lead for allocated projects, undertake the production of designs for projects and proposals, ensuring the proposed design conforms to approved standards, specifications, and safety requirements. Production and checking of work package documentation for projects with a right first-time quality culture. Production of costings for design solutions ensuring that compliant solutions at least cost are identified. Drive the development of innovation in our technical solutions for our clients, to meet their greatest challenges. Work closely with all stakeholders to provide detailed input to specific project programs ensuring innovation and technical excellence are effectively delivered to meet client needs. Work closely with the Project Managers, Planners and Cost Consultants to provide detailed input to specific project programs. Assist or lead in the role of Designer as identified in the CDM regulations, with particular attention to design risks following best practice risk elimination, management and control A full understanding of the design / application of telecoms and security systems and installations used within the built environment and transportation service sectors and the associated safety requirements. Telecoms Structured cabling solutions for Voice and Data services (fibre and copper); Comms room design including cabinet arrangement and population; IP telephony; PABX installations (digital and IP); Radio system installations (PMR and DMR); Power supply systems including PDU and UPS; Mobile telephony and DAS installations; Intercom systems; Public Address (including EPA) and Mass Notification systems, and the requirements of safety concepts in system and equipment design. Security Closed Circuit Television (CCTV) Installations; ANPR and Video Analytics; Electronic Access Control Systems, including use of Biometric technology; Intruder Detection Systems; Volumetric detection technologies; Perimeter Security and PIDS; Power supply systems including PDU and UPS; Radio signalling systems Physical security installations Vehicle and pedestrian control systems Personnel tracking systems and beacon technology, and the requirements of safety concepts in system and equipment design. In addition, the above the ideal candidate will have an ability to: Delivers solutions; Be customer focused; Be a complex problem solver; Have a strategic mindset; Have excellent Interpersonal, communication and influencing skills; Have situational adaptability and be self-motivated; Be resilient; A passion for innovation and technical excellence; A Global Mindset and demonstrated ability to work across cultures and remotely with our Global Integrated Delivery teams; Qualifications & Experience: Essential Excellent communication skills. Degree/HNC or relevant experience. BPSS Preferred Proficient in the use of CAD and 3D design software (e.g. AutoCAD, Revit, MicroStation and BIM) Chartered Engineer or working toward it. Holding of a professional qualification in security design Staff management and supervision experience SC or DV Security Clearance A good understanding of the application of Project Management techniques and contractual conditions An understanding of the Role of the Designer in the application of the CDM regulations Why Jacobs? We clear the way for inventive thinking, so you have the support, means and space to deliver the boldest solutions for the extraordinary and every day. Jacobs. A world where you can. Our Culture: We're invested in you and your success. Our values stand on a foundation of safety, integrity, inclusion and diversity. We put people at the heart of our business and we truly believe that by supporting one another through our culture of caring, we all succeed. We value positive mental health and a sense of belonging for all employees. We aim to make inclusion and diversity core attributes of our identity, embedded in all our employment and business practices in all locations. We know that if we are inclusive, we're more connected, and if we are diverse, we're more creative. Jacobs partners with VERCIDA to help us attract and retain diverse talent. For greater online accessibility please visit to view and access our roles. As a Disability Confident employer, we will interview all disabled applicants who meet the minimum criteria for a vacancy. We welcome applications from candidates who are seeking flexible working and from those who may not meet all the listed requirements for a role. If you have any queries regarding the application process, please contact the team here . Successful candidates will be asked to complete a Baseline Personnel Security Standard Pre-Employment check and will be required to undergo various checks including: Identity, Right to Work; Employment/Education History and Criminal Record. If you are unable to meet this and any associated criteria, then your employment may be delayed or rejected.
About the opportunity: Our Cities and Places business offers solutions across a full spectrum of services including urban development, architecture, structures and civils, building services and interior design. Within Cities and Places we are developing places for the future and integrating the smart, connected and secure architecture to facilitate future technology and the benefits it brings as we help our clients find new solutions. This opportunity is to guide and support clients through the development of technical telecoms and electronic security solutions. You will be a design leader producing technical architecture and specifications within multi-disciplinary teams. Alongside project delivery and project management, work will include client engagement and bidding. You'll be working with a dynamic team in the delivery of innovative designs and costings to demanding project timescales, requiring a sharp customer focus in a competitive marketplace. Principal role accountabilities: As Design/Technical lead for allocated projects, undertake the production of designs for projects and proposals, ensuring the proposed design conforms to approved standards, specifications, and safety requirements. Production and checking of work package documentation for projects with a right first-time quality culture. Production of costings for design solutions ensuring that compliant solutions at least cost are identified. Drive the development of innovation in our technical solutions for our clients, to meet their greatest challenges. Work closely with all stakeholders to provide detailed input to specific project programs ensuring innovation and technical excellence are effectively delivered to meet client needs. Work closely with the Project Managers, Planners and Cost Consultants to provide detailed input to specific project programs. Assist or lead in the role of Designer as identified in the CDM regulations, with particular attention to design risks following best practice risk elimination, management and control A full understanding of the design / application of telecoms and security systems and installations used within the built environment and transportation service sectors and the associated safety requirements. Telecoms Structured cabling solutions for Voice and Data services (fibre and copper); Comms room design including cabinet arrangement and population; IP telephony; PABX installations (digital and IP); Radio system installations (PMR and DMR); Power supply systems including PDU and UPS; Mobile telephony and DAS installations; Intercom systems; Public Address (including EPA) and Mass Notification systems, and the requirements of safety concepts in system and equipment design. Security Closed Circuit Television (CCTV) Installations; ANPR and Video Analytics; Electronic Access Control Systems, including use of Biometric technology; Intruder Detection Systems; Volumetric detection technologies; Perimeter Security and PIDS; Power supply systems including PDU and UPS; Radio signalling systems Physical security installations Vehicle and pedestrian control systems Personnel tracking systems and beacon technology, and the requirements of safety concepts in system and equipment design. In addition, the above the ideal candidate will have an ability to: Delivers solutions; Be customer focused; Be a complex problem solver; Have a strategic mindset; Have excellent Interpersonal, communication and influencing skills; Have situational adaptability and be self-motivated; Be resilient; A passion for innovation and technical excellence; A Global Mindset and demonstrated ability to work across cultures and remotely with our Global Integrated Delivery teams; Qualifications & Experience: Essential Excellent communication skills. Degree/HNC or relevant experience. BPSS Preferred Proficient in the use of CAD and 3D design software (e.g. AutoCAD, Revit, MicroStation and BIM) Chartered Engineer or working toward it. Holding of a professional qualification in security design Staff management and supervision experience SC or DV Security Clearance A good understanding of the application of Project Management techniques and contractual conditions An understanding of the Role of the Designer in the application of the CDM regulations Why Jacobs? We clear the way for inventive thinking, so you have the support, means and space to deliver the boldest solutions for the extraordinary and every day. Jacobs. A world where you can. Our Culture: We're invested in you and your success. Our values stand on a foundation of safety, integrity, inclusion and diversity. We put people at the heart of our business and we truly believe that by supporting one another through our culture of caring, we all succeed. We value positive mental health and a sense of belonging for all employees. We aim to make inclusion and diversity core attributes of our identity, embedded in all our employment and business practices in all locations. We know that if we are inclusive, we're more connected, and if we are diverse, we're more creative. Jacobs partners with VERCIDA to help us attract and retain diverse talent. For greater online accessibility please visit to view and access our roles. As a Disability Confident employer, we will interview all disabled applicants who meet the minimum criteria for a vacancy. We welcome applications from candidates who are seeking flexible working and from those who may not meet all the listed requirements for a role. If you have any queries regarding the application process, please contact the team here . Successful candidates will be asked to complete a Baseline Personnel Security Standard Pre-Employment check and will be required to undergo various checks including: Identity, Right to Work; Employment/Education History and Criminal Record. If you are unable to meet this and any associated criteria, then your employment may be delayed or rejected.
01/02/2022
Full time
About the opportunity: Our Cities and Places business offers solutions across a full spectrum of services including urban development, architecture, structures and civils, building services and interior design. Within Cities and Places we are developing places for the future and integrating the smart, connected and secure architecture to facilitate future technology and the benefits it brings as we help our clients find new solutions. This opportunity is to guide and support clients through the development of technical telecoms and electronic security solutions. You will be a design leader producing technical architecture and specifications within multi-disciplinary teams. Alongside project delivery and project management, work will include client engagement and bidding. You'll be working with a dynamic team in the delivery of innovative designs and costings to demanding project timescales, requiring a sharp customer focus in a competitive marketplace. Principal role accountabilities: As Design/Technical lead for allocated projects, undertake the production of designs for projects and proposals, ensuring the proposed design conforms to approved standards, specifications, and safety requirements. Production and checking of work package documentation for projects with a right first-time quality culture. Production of costings for design solutions ensuring that compliant solutions at least cost are identified. Drive the development of innovation in our technical solutions for our clients, to meet their greatest challenges. Work closely with all stakeholders to provide detailed input to specific project programs ensuring innovation and technical excellence are effectively delivered to meet client needs. Work closely with the Project Managers, Planners and Cost Consultants to provide detailed input to specific project programs. Assist or lead in the role of Designer as identified in the CDM regulations, with particular attention to design risks following best practice risk elimination, management and control A full understanding of the design / application of telecoms and security systems and installations used within the built environment and transportation service sectors and the associated safety requirements. Telecoms Structured cabling solutions for Voice and Data services (fibre and copper); Comms room design including cabinet arrangement and population; IP telephony; PABX installations (digital and IP); Radio system installations (PMR and DMR); Power supply systems including PDU and UPS; Mobile telephony and DAS installations; Intercom systems; Public Address (including EPA) and Mass Notification systems, and the requirements of safety concepts in system and equipment design. Security Closed Circuit Television (CCTV) Installations; ANPR and Video Analytics; Electronic Access Control Systems, including use of Biometric technology; Intruder Detection Systems; Volumetric detection technologies; Perimeter Security and PIDS; Power supply systems including PDU and UPS; Radio signalling systems Physical security installations Vehicle and pedestrian control systems Personnel tracking systems and beacon technology, and the requirements of safety concepts in system and equipment design. In addition, the above the ideal candidate will have an ability to: Delivers solutions; Be customer focused; Be a complex problem solver; Have a strategic mindset; Have excellent Interpersonal, communication and influencing skills; Have situational adaptability and be self-motivated; Be resilient; A passion for innovation and technical excellence; A Global Mindset and demonstrated ability to work across cultures and remotely with our Global Integrated Delivery teams; Qualifications & Experience: Essential Excellent communication skills. Degree/HNC or relevant experience. BPSS Preferred Proficient in the use of CAD and 3D design software (e.g. AutoCAD, Revit, MicroStation and BIM) Chartered Engineer or working toward it. Holding of a professional qualification in security design Staff management and supervision experience SC or DV Security Clearance A good understanding of the application of Project Management techniques and contractual conditions An understanding of the Role of the Designer in the application of the CDM regulations Why Jacobs? We clear the way for inventive thinking, so you have the support, means and space to deliver the boldest solutions for the extraordinary and every day. Jacobs. A world where you can. Our Culture: We're invested in you and your success. Our values stand on a foundation of safety, integrity, inclusion and diversity. We put people at the heart of our business and we truly believe that by supporting one another through our culture of caring, we all succeed. We value positive mental health and a sense of belonging for all employees. We aim to make inclusion and diversity core attributes of our identity, embedded in all our employment and business practices in all locations. We know that if we are inclusive, we're more connected, and if we are diverse, we're more creative. Jacobs partners with VERCIDA to help us attract and retain diverse talent. For greater online accessibility please visit to view and access our roles. As a Disability Confident employer, we will interview all disabled applicants who meet the minimum criteria for a vacancy. We welcome applications from candidates who are seeking flexible working and from those who may not meet all the listed requirements for a role. If you have any queries regarding the application process, please contact the team here . Successful candidates will be asked to complete a Baseline Personnel Security Standard Pre-Employment check and will be required to undergo various checks including: Identity, Right to Work; Employment/Education History and Criminal Record. If you are unable to meet this and any associated criteria, then your employment may be delayed or rejected.
