79 jobs found

An exciting opportunity for an experienced Manufacturing Test Engineer to join our Circuit card assembly Engineering team. This is a fast-paced but friendly and inclusive Manufacturing environment that will challenge you Salary: Circa £45,500 depending on experience Dynamic (hybrid) working: 4 or 5 days per week on-site due to workload classification Security Clearance: British National Only. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more The opportunity: As part of our continued growth, we are looking for a highly skilled and methodical Electronics Manufacturing Test Engineer to join our Circuit Card Assembly team. In this critical role, you will specialise in diagnosing faults on PCB assemblies down to component level. Your expertise will be crucial in accurately identifying root causes of failure, providing technical reports and supporting the implementation of corrective actions, which in turn will be utilised to improve production yield and ensure programme targets are achieved. You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment. The team has a great mix of people, ranging from apprentices and graduates through to time served experienced engineers, all striving to deliver technical excellence across a number of different missile systems in development and production. Key Responsibilities: Technical Root Cause Analysis:Performing fault diagnosis down to component level on analogue and digital PCB assemblies using a wide range of both automated and manual test equipment including oscilloscopes, multi-meters, signal generators, etc. Test Specification/Instruction Generation:Supporting the introduction of new test facilities by generating test specifications, operator instructions, and maintaining appropriate configuration control. Cross-Functional Collaboration:Serving as a key point of contact, collaborating closely with Manufacturing, Quality, Process, Design Engineers, and other stakeholders to overcome technical challenges and drive product improvements. Design & Development Support:Providing crucial Test Engineering input during the design and development phases, from initial concept through to Production Readiness Reviews. What we're looking for from you: Formal technical Engineering/Craft Apprenticeship to NVQ Level 3/TR23/TR21 AND Formal further education certificate to Level 4 (HNC or equivalent in a relevant subject) OR BEng/BSc in relevant Engineering/Technical Degree Expertise in Electronics Test & Diagnosis:A strong theoretical and practical understanding of electrical/electronic measurement and test principles, test equipment and fault diagnosis techniques for electronic sub-assemblies and PCBs. Engineering Documentation Experience: An ability to interpret detailed schematics, drawings and test related documentation. Test Equipment Experience:Hands-on experience using both manual and automated test equipment, preferably within a defence or similar high-reliability manufacturing environment. Manufacturing Systems Proficiency:Familiarity with enterprise resource planning, manufacturing execution and version control system tools (e.g., SAP, MES, PLM) for logging test activities and generating non-conformance quality reports. Desirable Experience working with RF-based circuitry would be preferable, but is not mandatory. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information.

We're looking for a Senior Software Engineer to join our team and take our technology and your career into new territories! MBDA is a great a place to learn about the company's entire product portfolio, whilst embracing the change to DevOps and other innovative technologies! Job Title: Senior Software Engineer Salary: £40,000-£75,000 depending on experience Location: Stevenage (We may be able to offer a relocation package for this role) Dynamic (hybrid) working: Typically for this role you will work 3-5 days per week on-site due to workload classification. Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: Maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave. Enhancements are available for paternity leave, neonatal leave and fertility testing and treatments. Facilities: Fantastic site facilities including subsidised meals, free car parking and much more. The opportunity: We're looking for a Senior Software Engineer to join our team and take our technology and your career into new territories! Test Software UK collaborate across Electronic Engineering, our Test Centre of Excellence and Software Engineering to deliver the MBDA UK test capability. Our mission as a function is to facilitate robust and timely test of missile systems and ensure MBDA continues to provide a decisive military capability for our home nations and their allies. Spanning a diverse portfolio of work packages, Test Software UK directly influences the company's product certification, manufacturing output and support activities. Specifically, Test Software UK are responsible for developing and supporting software packages that utilise Test Equipment hardware to configure, verify and validate the conformance and quality of our MBDA UK product range from development, through production and into field test scenarios. We are a multi-disciplined, dynamic, focused and agile team specialising in all aspects of test solution design, including software, hardware, simulation and real-time systems. What we're looking for from you: A software engineer or electronics engineer with transferable talent into software development for test solutions: Strong ability to write software in one of the following languages; C, C++ or ADA and motivated to develop reliable, high performance, standardised and documented software Excellent analytical and design ability, including review and critical analysis 'Can do' and flexible approach - you'll enjoy solving technical problems that sometimes extend beyond the bounds of "software" Keen to work on novel products where the software you produce is time and mission critical Ability to communicate effectively with multiple stakeholders, including Systems Engineering, Electronics and Electrical and Test and Validation Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information.

Join MBDA UK Ltd as a Senior Test Engineer and become an integral part of our Manufacturing team. This role presents an outstanding chance to contribute to the testing of our products. By joining us, you will have the opportunity to play a crucial role in upholding the highest standards of quality and reliability for our products. Salary: Circa £45,000 dependent on experience Dynamic (hybrid) working: 4-5 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave. Enhancements are available for paternity leave, neonatal leave and fertility testing and treatments. Facilities: Fantastic site facilities including subsidised meals, free car parking and much more Training and Development: Excellent career progression, training and career development opportunities The opportunity: This opportunity is for a Test Engineer to join the Manufacturing team supporting test and diagnostics of electrical/electronic sub-systems and circuit cards during all phases of the product lifecycle. You will be providing technical support to the manufacturing test capability, to ensure programme targets are met to agreed time, cost and quality requirements. Providing Test Engineering support during Design / Development phases from initial concept through to Production Readiness Review and release to Operations. Supporting Test Facility introduction and ensuring that appropriate configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions. Supporting testing of electrical/electronic sub-assemblies and circuit cards, with diagnosis of production test failures down to component level. Working closely with Operations, the design teams and other stakeholders to overcome any technical challenges. Always aiming to deliver in line with all programme and quality requirements, whilst maintaining Test Engineering functional governance and pursuing continuous improvement. You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment. The team has a great mix of people, ranging from apprentices and graduates through to experienced engineers, all striving to deliver technical excellence across a number of different missile systems in development and production. What we're looking for from you: Minimum HNC level of qualification or equivalent in a relevant subject (HND/Degree preferred) plus experience in digital and analogue electronics manufacture and test. A good understanding of electrical/electronic measurement and test principles and test equipment, as well as fault diagnosis techniques for electronic/electro-mechanical sub-assemblies. Experience of using both manual and automated test equipment, preferably in a defence organisation or similar manufacturing environment. Familiar with enterprise resource planning and manufacturing execution system programs (e.g. SAP, MES) for recording test activities and generating non-conformance reports and concessions. The ability to plan and organise own work in order to ensure multiple tasks can be prioritised and delivered against Project objectives. Good verbal and written communication skills, including generation of test specifications, operator instructions and technical reports based on higher-level requirements. Proven analytical and problem solving skills, with strong attention to detail. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information.

Want to join a company is a recognised innovation and technology leader, tackling highly complex challenges across multiple defence and aerospace domains? Join a business who deliver advanced systems and services to customers worldwide and is widely regarded as a trusted, high-performing organisation within its market! - Important : All applicants must be able to obtain Security Clearance minimum 5 years UK residency Working : Possible Flexible and some remote working potentials. - We are excited to offer, as well as, our competitive package and great career development - a Welcome Bonus of 7.5k! - As a Senior Product Test Engineer you'll demonstrate a range of professional electronics skills such as debug, working on high reliability electronics products, work to component level and the highest standards to deliver products to our customers. - This role is a blend of electronic test engineering supporting manufacturing production projects. - Experience in an electronics or electronics-manufacturing company testing & fault finding electronic assemblies to component level, fault finding, presenting data and showing expertise in these areas is ideal for the role. - Company Highlights: Join a globally recognised technology and defence leader, repeatedly awarded for innovation, patents and engineering excellence across aerospace, defence, space and cyber. A organisation trusted by governments worldwide, delivering mission-critical systems and recognised with Gold status by the UK Ministry of Defence for its support of the armed forces community. Be part of a business consistently ranked among the top innovators in the aerospace and defence sector, combining cutting-edge technology with long term programme stability, including high-profile contracts with government and allied partners worldwide. Explore the chance to work on cutting-edge, nationally significant projects with real-world impact, not theoretical R&D. A business, known for a strong culture of innovation, inclusion and long term career development, backed by the scale and stability of a global industry leader. Essential Skills & Experience Test Lifecycle Presenting data to teams Diagnostics, fault finding, debug and corrective action Mentor other staff e.g. diagnostic technicians Design for Manufacturing and Design for Test (DFM/DFT) implementation Military or high reliability manufacturing electronics Challenge status quo, present new ideas Work on range of electronic technologies - Even If you feel like you don't meet every requirement, we encourage you to reach out and apply.

Contract Senior Embedded Software Engineer Rate: up to £60pphr + VAT, outside IR35 Location: East Sussex (Hybrid: 2 days onsite, 3 days remote) Our client, a well-established and financially secure engineering organisation, is seeking a Senior Embedded Software Engineer to join their expanding development team. This is a fantastic opportunity to work within a company recognised for its long-term stability, strong engineering ethos, and continued investment in innovation. You ll be part of a collaborative, multi-disciplinary team, playing a key role in developing embedded software for advanced electronic systems. The position offers involvement across the full software development lifecycle from initial requirements through to validation and release. The Role As a Senior Embedded Software Engineer, you will design, develop, and support embedded software for controller systems, instrumentation, and user interfaces. You ll contribute to both new product development and the enhancement of existing platforms, ensuring delivery of reliable, production-ready solutions for global applications. Working closely with hardware, systems, and product teams, you will also provide technical leadership and mentorship within the software group. Key Responsibilities Design, develop, and maintain embedded software for controller and instrumentation platforms Contribute across the full software lifecycle: requirements, design, implementation, testing, and release Architect scalable and maintainable software solutions that encourage reuse and collaboration Participate in Agile/SCRUM development processes Support software integration with hardware systems and assist in system-level testing Troubleshoot and resolve software and hardware-related issues Develop test tools, automation frameworks, and validation scripts Produce clear design, development, and test documentation Drive continuous improvement in software quality and development practices Mentor and support junior engineers within the team Skills & Experience Required Degree in Computer Science, Software Engineering, Electronic Engineering, or a related field Strong experience in embedded software development Proven experience working on electronics-based products Solid understanding of embedded processors and hardware/software interaction Experience within structured development environments Familiarity with Agile/SCRUM methodologies Track record of delivering production-quality embedded systems Strong debugging and problem-solving skills across software and hardware Experience working in cross-functional engineering teams Desirable Skills Experience within regulated or compliance-driven industries Exposure to global or distributed engineering teams Experience with test automation, validation frameworks, or software verification tools Please send a CV if you would like to apply for thew role.

Bristol We are seeking a highly capable Electronic Systems Engineer to lead and support the system-level design, equipment breakdown, and interconnection of complex electronic systems. Job Title: Electronic Systems Engineer Salary: Circa £52,500 - £57,000 depending on experience Dynamic (hybrid) working: 2-3 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: We're looking for a systems-focused electronics engineer who thrives on turning complex functional requirements into fully integrated hardware solutions, from early concept through to production and deployment. In this role, you'll take ownership of system-level electronic design, defining architectures, flowing down requirements, and breaking down equipment and subsystems into clearly defined functions, interfaces, and responsibilities. You'll shape how everything connects, managing interconnects between subsystems and external equipment, and producing high-quality system schematics, wiring diagrams, and interface control documentation that form the backbone of robust, reliable designs. Collaboration is at the heart of this position. You'll work closely with mechanical, firmware, software, and manufacturing teams to ensure seamless system integration, guiding designs through validation, acceptance testing, and into operational use. From hands-on system integration and root cause analysis to ensuring compliance with safety, EMC, and regulatory standards, you'll play a key role in delivering dependable electronic equipment solutions. What we're looking for from you: Bachelor's degree (or higher) in Electronic Engineering, Electrical Engineering, or a related discipline Strong experience in system-level electronic design and integration Proven ability to define equipment architectures, interconnects, and interfaces Solid understanding of analogue and digital electronics Ability to read and produce system schematics, wiring diagrams, block diagrams, and technical documentation Excellent problem-solving, communication, and documentation skills Experience with systems design tools (e.g. DOORS, Rhapsody, MATLAB Simulink) Desirable but not essential skills Experience with power distribution and grounding strategies Knowledge of communication protocols (CAN, Ethernet, HDLC, SPI, I C, UART) Familiarity with EMC/EMI mitigation at system level Experience in regulated industries (automotive, aerospace, rail, medical, defence) Experience with SPICE simulator software Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information.

Transducer Test Engineer Competitive Package + Benefits Blackbushe, UK On-site Permanent We are looking for a detail-oriented Transducer Test Engineer to join a highly innovative engineering organisation specialising in underwater acoustics and subsea technology. This is an exciting opportunity to work at the forefront of advanced sensing systems, supporting cutting-edge products used globally across offshore energy, defence, and oceanographic research. The business is a well-established leader in subsea positioning, navigation, and communication systems, with decades of expertise in delivering high-performance acoustic solutions. Due to continued growth, they are expanding their engineering team. The company develops advanced underwater acoustic technologies that enable precise navigation, data transmission, and environmental measurement in challenging subsea environments. Their solutions are critical to offshore operations, autonomous vehicles, and scientific exploration. We are looking for someone who enjoys working in an engineering-focused environment. You may already be an experienced Test Engineer or looking to develop further in your career. You will need to have practical experience with testing, data analysis, or lab-based engineering. Key Responsibilities: Developing and executing test plans, ensuring high-quality delivery of results Performing in-air and in-water acoustic and electrical testing Analysing data and producing detailed reports including root cause analysis Supporting development and continuous improvement of acoustic products and systems Defining and improving testing processes and methodologies Collaborating with engineering and production teams Assisting in the development and evaluation of new transducer designs Ensuring compliance with industry standards and best practices Key Skills Experience in engineering testing, data analysis, or similar technical roles Strong problem-solving skills and attention to detail Good communication skills and ability to present technical findings Understanding of acoustics, electronics, or related fields Degree in Physics, Engineering, Mathematics or similar Desirable skills: Experience with underwater acoustics or transducers Familiarity with lab equipment and measurement systems Experience with prototype development or calibration systems Knowledge of engineering or manufacturing environments What you get in return: Competitive benefits package Opportunity to work on cutting-edge deep tech systems Clear progression opportunities This company is an equal opportunity employer and value diversity. They do not discriminate on the basis of race, religion, colour, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. Interested? Please submit your CV via the link provided. Alternatively email me on INDENG DCS Recruitment and all associated companies are committed to creating a working environment where diversity is celebrated and everyone is treated fairly, regardless of gender, gender identity, disability, ethnic origin, religion or belief, sexual orientation, marital or transgender status, age, or nationality

Test Engineer Colchester Salary Negotiable Full-Time (37 hrs, Flexitime) Are you an Electronics or Engineering graduate with test experience looking to develop your career? Our client, a global leader in the design and manufacture of control and monitoring systems , is looking for a Test Engineer to join their team in Colchester. You will play a key role testing products within R&D and production , as well as investigating and repairing customer returns. Key Responsibilities Fault finding, troubleshooting and root-cause analysis on electronic products Testing embedded software using black-box testing methods Writing test plans, test cases and reports Debugging PCBs and carrying out electronic repairs Inspecting and testing products during production Performing Factory Acceptance Testing (FAT) for industrial and marine systems Maintaining and improving test equipment and processes Providing feedback to design engineers to support product improvements Skills & Experience HNC or higher in Electronics / Electrical / Engineering Experience in hardware testing and fault finding Understanding of software or controls testing methodologies Ability to debug PCBs and troubleshoot electronic systems Familiarity with engineering standards (ISO, IEC, IEEE etc.) is beneficial Experience in marine, industrial or rail/traction systems would be advantageous. Benefits Ongoing training and career development 25 days holiday + bank holidays Flexitime (37 hours per week) Matched pension up to 6% Free on-site parking If you are a Test Engineer looking to progress your career, call Appointments or apply via the link. Candidates who require sponsorship now or in the future will not be considered for this role.

Job Title: Manufacturing Test Engineer Location: Blackbushe Department: Manufacturing/Production Reports To: Production Manager Contract Type: Fixed Term Temporary - 18 months Role Purpose We are seeking a hands-on Manufacturing Test Engineer to perform rigorous electronic testing across a diverse range of products. This role involves bench testing, tank testing, fault diagnosis, and support throughout the production process-from component level, through PCB and chassis assembly, to final unit assembly. The successful candidate will ensure strict adherence to production schedules, quality standards, and safety requirements. Key Responsibilities Conduct defined electrical/electronic and tank testing procedures throughout the production process. Diagnose and resolve faults at the component and assembly level. Perform basic assembly tasks to support testing processes when required. Identify and report specification or design non-conformances, raising appropriate documentation as necessary. Ensure all testing activities comply with quality standards and recommended production timelines. Maintain accurate documentation of test results, calibration certificates, and other production records. Utilize company IT systems (ERP, Intranet, Microsoft Office) to support testing and production activities. Collaborate effectively with other departments (Engineering, Stores, Quality) to resolve test-related issues. Provide ad hoc assistance to the Manufacturing Manager, Cell Coordinators, and other Test Engineers. Essential Competencies Strong adaptability and flexibility. Excellent problem-solving and decision-making skills. High attention to detail and quality focus. Effective communication and teamwork abilities. Drive for results and persistence in resolving complex issues. Ability to interpret technical data, including engineering drawings and circuit diagrams. Desirable Competencies: Coaching and development skills. Proactivity and innovation in testing and troubleshooting. Leadership and motivation capabilities. Qualifications & Experience Essential: HNC in Electronics or equivalent qualification. Hands-on experience in electronic testing. Proven experience in fault finding down to component level. Competent with test equipment (oscilloscopes, DVMs, power supplies, timer counters, etc.). Proficient in Microsoft Office (Outlook, Excel, Word). Desirable: Previous experience in a manufacturing or production environment. Additional Information Travel Required: No Offshore Training Required: No Regular Medical Required: Yes, annual Staff Management: None Budget Responsibility: None Contact Coral at DCS to apply DCS Recruitment and all associated companies are committed to creating a working environment where diversity is celebrated and everyone is treated fairly, regardless of gender, gender identity, disability, ethnic origin, religion or belief, sexual orientation, marital or transgender status, age, or nationality

Join a team pushing the boundaries of high-reliability electronics. As a Senior Product Test Engineer, you ll play a key role in testing, debugging, and delivering cutting-edge electronic products that meet the highest standards. This is a hands-on role where your expertise directly improves product quality and performance. What You ll Do Test and debug complex electronic assemblies down to component level Support manufacturing projects with expert electronic test engineering Present clear, insightful data to engineering and production teams Lead corrective actions and drive continuous improvement Mentor diagnostic technicians and share your technical expertise Contribute to DFM/DFT activities to enhance product quality and testability Work across a wide range of advanced electronic technologies Challenge existing processes and introduce fresh, innovative ideas What You ll Bring A qualification in Electronics (degree, postgraduate, or HND equivalent) Experience with programming in Labview or NI Test Stand Strong hands-on experience testing and fault-finding electronic assemblies Ability to diagnose issues at component level with precision Background in high-reliability, military, or defence-related electronics (ideal) Confident in presenting technical data and communicating test results Requirements: BPSS eligible Open to non-British applicants (no sponsorship) (NDA may be required) Relocation package available 4 days a week on site required Benefits: Competitive salaries. 25 days holiday + statutory public holidays, plus opportunity to buy and sell up to 5 days (37hr) Contributory Pension Scheme (up to 10.5% company contribution) Company bonus scheme (discretionary). 6 times salary Life Assurance with pension. Flexible Benefits scheme with extensive salary sacrifice schemes, including Health Cashplan, Dental, and Cycle to Work amongst others. Enhanced sick pay. Enhanced family friendly policies including enhanced maternity, paternity & shared parental leave. Culture: 37hr working week, although hours may vary depending on role, job requirement or site-specific arrangements. Early 1.30pm finish Friday, start your weekend early! Up to 5 paid days volunteering each year.

A Lead Test Engineer with a proven background in an Electronic Manufacturing environment will bring their commitment to quality and service, their ability to inspire a team and their hands-on skills to an award-winning Technology company offering a competitive salary package and career stability. The successful Lead Test Engineer will play a key role in ensuring the efficient production of a range of mission critical electronic and mechanical devices; undertaking troubleshooting and resolving issues, maintaining detailed documentation adhering to quality and safety standards. The ideal Lead Test Engineer will bring: A formal Electronic Engineering qualification (HNC, HND, Degree or equivalent). Hands-on fault finding skills, SMT soldering skills and experience of working with a range of test equipment. Knowledge of electronic assembly techniques and a good understanding of manufacturing processes. Ability to read schematics. Familiarity with EMC standards. Experience of leading a small team of technicians. Strong communication skills. This role offers a competitive salary package with a discretionary bonus, Pension Scheme, Life Assurance, variable start/finish times, free snacks and more.

Electronics Engineer Exeter Area 35- 40k If you are an Electronics Engineer with a passion for software or a more software focused engineer with a passion for electronics then this could be the ideal new role for you! The company are a specialist in sensors, measurement and telemetry and design and develop a wide range of hi-technology products. In this role you will be working in a small multi-disciplined Engineering design team of Electronics, Firmware and Software Engineers. You will be supporting the Senior Software Engineer, where your experience with electronics will also be called upon. The majority of the role will involve supporting Automated Test Environments for electronic products, here you will be creating/maintaining test scripts, fault-finding and helping to commission new test fixtures. The rest of the role will involve writing customer-facing PC software to support products and in-house development tools and there may be occasions where you are required to assist with Firmware development and other Engineering tasks. You will be working on a range of technologies including low level drivers to hardware, GUI interfaces, Communications protocols for wireless and CAN and UART interfaces. The role will include Engineering Development of Software and associated technical documentation. Production support, including ATE (Automated Test Equipment) scripts Technical Support for standard products for both internal and external requirements. Application support. Change control. Support for Sales with quotes and technical documentation. Skills and Experience Experience of a general electronics design environment and processes. Understanding of electronics circuit operation and design. Understanding of automated testing. Use of test equipment such as multimeters and oscilloscopes Methodical approach to problem solving. Experienced in writing design documents such as specifications and test procedures. Good understanding/experience of a range of communication technologies USB, Bluetooth, Serial communications. Experience of writing structured PC software using C# and other languages Ability to create good clear GUI's Disciplined approach to Version Control Beneficial to have Experience of National Instruments Labview and Teststand Experience working in an Electronics Manufacturing environment Ability to create iOS and Android apps Project Management. Liaising with customers from design concepts to providing training. For more details on this interesting and varied role please apply online and one of the team at Reed will be in touch.

Working: The role offers flexible working but does require engineers on site for 4-5 days per week and is on a secure site where SC clearance is needed. . We have a great opportunity for an Electronics Test Engineer to join the Manufacturing team at one of our major defence clients. . The Manufacturing Test Engineer will be providing technical support to the manufacturing test capability, to ensure programme targets are met to agreed time, cost and quality requirements. . The Manufacturing Test Engineer will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment. The team has a great mix of people, ranging from apprentices and graduates through to experienced engineers, all striving to deliver technical excellence across a number of different projects in development and production. - Main Responsibilities; Providing Test Engineering support during Design / Development phases from initial concept through to Production Readiness Review and release to Operations. Supporting Test Facility introduction and ensuring that appropriate configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions. Supporting testing of electrical/electronic sub-assemblies and circuit cards, with diagnosis of production test failures down to component level. Working closely with Operations, the design teams and other stakeholders to overcome any technical challenges. Always aiming to deliver in line with all programme and quality requirements, whilst maintaining Test Engineering functional governance and pursuing continuous improvement. - Skill and Experience; Minimum HNC level of qualification or equivalent in a relevant subject (HND/Degree preferred) plus experience in digital and analogue electronics manufacture and test. A good understanding of electrical/electronic measurement and test principles and test equipment, as well as fault diagnosis techniques for electronic/electro-mechanical sub-assemblies. Experience of using both manual and automated test equipment, preferably in a defence organisation or similar manufacturing environment. Familiar with enterprise resource planning and manufacturing execution system programs (e.g. SAP, MES) for recording test activities and generating non-conformance reports and concessions. The ability to plan and organise own work in order to ensure multiple tasks can be prioritised and delivered against Project objectives. Good verbal and written communication skills, including generation of test specifications, operator instructions and technical reports based on higher-level requirements. Proven analytical and problem solving skills, with strong attention to detail. - Desirable Experience; Experience in the Defence or safety regulated environment would be advantageous Experience in the Naval / Maritime domain would be advantageous. - Even If you feel like you don't meet every qualification, we encourage you to reach out an apply. - Company Benefits; Bonus : Up to 2,500 (based on performance). Up to 21% (based on performance) Pension : Up to 14% total contribution. Parental Leave : Enhanced parental, maternity, and shared parental leave. Flexi Leave : Up to 15 additional days. Facilities : On-site perks like subsidised meals and free parking. Training and Development : Excellent opportunities for career progression and skill development Company Details; The company are a multi-national group, being No 1 in Europe for what they do! With a number of awards and recognitions, with great career progression and opportunities across the business! It's no wonder, they have been among the winners of the annual Glassdoor Employees' Choice Awards, 2022, and most recently receiving three accreditation gold standard awards with Investors in People! "Interesting work. Good work-life balance. Employees made to feel valued." Software Engineer, 5 Dec 2022. Glassdoor review. "Promotes and believes in a good work/life balance interesting work on most programmes Encourages internal mobility. Offers good development/training opportunities" Principal Systems Engineer, 19 Dec 2022. Glassdoor review. True advocates of ED&I as an Equal Opportunity Employer! With over 10 Networking groups and communities across the business advocating Equity, Diversity and Inclusion. Enhanced parental leave: Offers up to 26 weeks for maternity, adoption and shared parental leave. Enhancements are available for paternity leave, neonatal leave and fertility testing and treatments.

We are seeking a highly skilled Model-Based Embedded Software Engineer to support the development of embedded control systems for off-highway equipment, including construction, agricultural, material-handling, and other heavy-duty machines. This role combines strong model-based design expertise with deep understanding of system requirements, safety expectations, and integration testing in rugged, real-world operating environments. You will be comfortable bridging software, electronics, and machine-level behaviours in complex hydraulic, electric, and powertrain systems. Embedded Software Engineer Role: Model-Based Control Software Development Design, develop, and maintain embedded control algorithms using MATLAB/Simulink, tailored to off-highway systems (e.g., hydraulics, driveline, powertrain, implement control). Perform model simulation, verification, and optimisation to meet machine performance targets. Support auto-code generation and calibration activities for production-grade embedded controllers. Requirements Management & Traceability Capture, refine, validate, and maintain requirements using JAMA, ensuring full traceability from stakeholder needs through to verification. Collaborate with system engineers, product owners, and machine teams to ensure clarity, feasibility, and alignment of requirements. Translate machine-level behaviours into robust software requirements. System Integration & Verification Develop and execute Software-in-the-Loop (SIL) tests to validate behaviour early in the development cycle. Support machine-level integration testing, including CAN-based debugging and analysis using tools such as CANalyzer. Drive issue resolution through structured analysis of field data, test logs, and system interactions. Work closely with HIL platforms where required to replicate machine scenarios. Functional Safety & Compliance Apply functional safety principles in line with ISO 13849, with awareness of Performance Levels and system safety architectures used in off-highway machinery. Support safety documentation, validation activities, and risk assessments for safety-related features. Cross-Functional Collaboration Interface with mechanical, hydraulic, electrical, and system engineering teams to ensure cohesive full-machine system design. Participate in design reviews, DFMEAs, and hazard analyses related to machine functionality and operator safety. Contribute to continuous improvement of development processes, toolchains, and modelling standards. Embedded Software Engineer Requirements: Strong capability in MATLAB/Simulink, including model architecture, simulation, and MBD workflows. Hands-on experience with JAMA, JIRA, and structured requirements management. Proficient with CANalyzer or equivalent tools for CAN-based diagnostics and communication analysis. Competency in executing and interpreting SIL tests and system integration results. Understanding of functional safety principles and ISO 13849. Understanding of off-highway machinery systems (e.g., hydraulics, propulsion, control interfaces, operator inputs). Appreciation of machine architectures including ECUs, sensors, actuators, networks, and safety functions. Familiarity with environmental challenges relevant to off-highway: vibration, temperature extremes, dust, EMC, etc. Strong documentation, communication, and requirements-focused mindset. Ability to work effectively with cross-disciplinary engineering teams. Excellent analytical thinking, problem-solving, and debugging capability. Proactive, structured, and quality-focused approach. Familiarity with hydraulics and machine control systems architecture. Knowledge of ISO 19014, ISO 25119, or ISO 26262. Experience with embedded C/C++ for debugging or interfacing. Exposure to electrified powertrain systems used in modern off-highway equipment. Embedded Software Engineer Applications: This vacancy is only available to Candidates with relevant experience as detailed in the job description. Due to volume of applications, we are unable to respond to applicants who do not possess the required skills and experience. Recent Graduates who do not have the required level of industry experience need not apply. Candidates must be authorised to work in the country where this role is located BEFORE making an application.

Develop embedded software solutions for cutting-edge UK defence technology to £80,000 DoE + Benefits This company is growing strongly with projects in various areas of national defence and are seeking a skilled Embedded Software Engineer to join the team. These projects are all specifically related to UK defence and so interested candidates will need to be British Citizens to be considered for this role. Whilst the exact nature of these projects is kept secret, they utilise advanced technologies and often require the development of brand-new techniques to solve very challenging problems. Whilst growing they are still a small team with a start-up atmosphere where roles aren t rigidly defined and hierarchy is minimal. New ideas and project directions are welcomed from anyone, and everyone is empowered to represent the business at customer meetings and conferences. You should expect to put your skills to use on a wide array of different projects with varying requirements. Some will be early-stage feasibility studies which may not include any programming while others will run through to the production of prototypes or demonstrator units. Requirements: Demonstrable commercial-grade experience in embedded software development with a proven track record of designing and implementing solutions to real-world problems. Strong proficiency with Linux and programming in C, plus at least one other relevant language such as C#, C++ or MATLAB. Knowledge in areas such as bare metal and RTOS software development, embedded software debugging methods, high-level software architecture, electronics development, or scripting for test would be highly advantageous. Relevant degree demonstrating strong academic foundations including top A Level grades or equivalent. British Citizen eligible for UK security clearance. Remuneration package is strong with good base salary and excellent benefits. For security reasons this is an in-office only role, no forms of hybrid or remote working are possible. Another top job from ECM, the high-tech recruitment experts. Even if this job's not quite right, do contact us now - we may well have the ideal job for you. To discuss your requirements call (phone number removed) or email your CV. We will always ask before forwarding your CV. Please apply (quoting ref: CV27583 ) only if you are eligible to live and work in the UK. By submitting your details you certify that the information you provide is accurate.

Are you an established Senior Engineering Project Manager looking for an exciting challenge? Join us to lead the delivery of our most critical projects. Drive the design, development, and delivery of intricate electronic sub-systems, from concept to production. Be a key player in our project management team and shape our delivery strategy! Salary: Up to £65,000 Dynamic (hybrid) working: Where possible, we will seek to accommodate a blended approach to on-site and remote working - such as being onsite when necessary to work with people and collaborate, then working from home and around family commitments to be your most efficient. This role could be full time or part time: 4 or 5 days per week. We are flexible and accommodating. It would be beneficial to be on-site 2 or 3 days a week, depending on the project needs; and working remotely other days. Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company Bonus: Bonus of up to 21% of base salary Pension: maximum total (employer and employee) contribution of up to 14% Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: We are Electronics Engineering. We are growing, dedicated, and we work as a team to deliver our projects. Your role as a Senior Engineering Project Manager (SEPM) is to deliver our most complex and priority projects to time, cost and quality; to drive the design, development and delivery of our highly complex electronic sub-systems, from concept through into full production. This is a fantastic opportunity to be a senior member of the project management team; someone who will contribute to our delivery strategy. We are supported by Project Controllers for scheduling in P6. And we mentor our Engineering Project Coordinators, who support your work across a portfolio of projects. The role has a defined development path towards Delivery Lead and Sector Lead, each looking after a larger portfolio of projects and teams of project managers, and greater customer management responsibilities. MBDA offers incredible development and career opportunities. There are creative opportunities in MBDA, for example, to take part in outreach representing Electronics Engineering in your community and becoming in involved in women-in-engineering events. What we're looking for from you: Someone with drive, passion and commitment who has: A solid background in the engineering development of electronics units Experience of Project Management best practice: Risk Management, Stakeholder Management, Compliance Management, Configuration Management and Earned Value Management. Experience of delivering significant project/programmes on time and to cost. Experience of project management across the various phases; from project conception and initiation to project close. Individuals with excellent communication skills; able to influence others to their way of thinking; Organised with an eye for detail and a sense of pride in what they deliver. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information.

Are you an established Engineering Project Manager looking for an exciting challenge? Join us to lead the delivery of our most critical projects. Drive the design, development, and delivery of intricate electronic sub-systems, from concept to production. Be a key player in our project management team and shape our delivery strategy! Salary: £50,000 - £55,000 depending on experience Dynamic (hybrid) working: Where possible, we will seek to accommodate a blended approach to on-site and remote working - such as being onsite when necessary to work with people and collaborate, then working from home and around family commitments to be your most efficient. This role could be full time or part time: 4 or 5 days per week. We are flexible and accommodating. It would be beneficial to be on-site 2 or 3 days a week, depending on the project needs; and working remotely other days. Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: We are Electronics Engineering. We are growing, dedicated, and we work as a team to deliver our projects. Your role as an Engineering Project Manager (EPM) is to deliver our most complex and priority projects to time, cost and quality; to drive the design, development and delivery of our highly complex electronic sub-systems, from concept through into full production. This is a fantastic opportunity to be a senior member of the project management team; someone who will contribute to our delivery strategy. We are supported by Project Controllers for scheduling in P6. And we mentor our Engineering Project Coordinators, who support your work across a portfolio of projects. The role has a defined development path towards Delivery Lead and Sector Lead, each looking after a larger portfolio of projects and teams of project managers, and greater customer management responsibilities. MBDA offers incredible development and career opportunities. There are creative opportunities in MBDA, for example, to take part in outreach representing Electronics Engineering in your community and becoming in involved in women-in-engineering events. What we're looking for from you: Someone with drive, passion and commitment who has: A solid background in the engineering development of electronics Experience of Project Management best practice: Risk Management, Stakeholder Management, Compliance Management, Configuration Management and Earned Value Management. Experience of delivering significant project/programmes on time and to cost. Experience of project management across the various phases; from project conception and initiation to project close. Individuals with excellent communication skills; able to influence others to their way of thinking; Organised with an eye for detail and a sense of pride in what they deliver. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information.

Role: Lead Software Engineer Location: East Sussex (On-site) Salary: Up to 65,000 (DOE) Start Date: ASAP Type: Permanent Company Overview Our client is a leading engineering and manufacturing organisation delivering advanced technology solutions across a range of high-tech industries. Their East Sussex site plays a key role in developing complex, electronics-based products within a collaborative and innovation-driven environment. The Lead Software Engineer Role in East Sussex We are seeking an experienced Lead Software Engineer to architect and lead software development across a range of embedded systems. You will guide a small team, drive best practices, and ensure delivery of high-quality, production-ready software. This is a hands-on leadership role covering the full software lifecycle, from requirements through to validation and release, within a structured, compliance-driven environment. Key Responsibilities Architect and develop scalable, reliable embedded software solutions Lead, mentor, and support a small team of engineers Act as SCRUM Master or technical lead within Agile environments Drive best practice across development, testing, and code reviews Maintain and improve regression testing and validation processes Collaborate with product, engineering, and manufacturing teams Ensure clear requirements, delivery milestones, and completion criteria Oversee software releases in line with quality and compliance standards Drive continuous improvement across development processes Key Skills Embedded software development (C or C++) Microcontrollers and processors (e.g. ARM, PIC) Software architecture and system design Electronics or manufacturing environment experience Testing, validation, and automation frameworks Agile and Waterfall methodologies (SCRUM experience preferred) Regulated or compliance-driven industry experience Leadership or mentoring experience Strong communication and stakeholder management If this sounds like you, apply now or get in touch for a confidential chat to secure your spot ahead of interviews.

Role: Senior Software Engineer Location: East Sussex (On-site) Salary: Up to 55,000 (DOE) Start Date: ASAP Type: Permanent Company Overview Our client is a leading engineering and manufacturing organisation delivering advanced technology solutions across a range of high-tech industries. Their East Sussex site plays a key role in developing complex, electronics-based products within a collaborative and innovation-driven environment. The Senior Software Engineer Role in East Sussex We are seeking an experienced Senior Software Engineer to develop and support software for controllers, instrumentation, and interfaces used in advanced engineering products. You will play a key role across the full software lifecycle, contributing to high-quality, production-ready solutions within a structured environment. This is a hands-on role suited to someone with strong embedded software experience who enjoys working on real-world, hardware-integrated systems. Key Responsibilities Develop scalable, reliable software solutions for embedded systems Work within Agile/SCRUM or multidisciplinary teams to deliver new features Provide technical support and contribute specialist expertise across projects Mentor and support less experienced engineers where required Investigate and resolve software and hardware issues for internal and external stakeholders Develop test harnesses, scripts, and automation tools for validation Contribute to the continuous improvement of software development processes Deliver production-ready code with appropriate documentation and version control Key Skills Embedded software development (C or C++) Microcontrollers and processors (e.g. ARM, PIC) Experience within electronics or manufacturing environments Testing, validation, and debugging experience Understanding of software development processes in regulated environments Exposure to Agile or SCRUM methodologies Experience supporting customer-facing, electronics-based products Strong communication and teamwork skills If this sounds like you, apply now or get in touch for a confidential chat to secure your spot ahead of interviews.