Metering Engineer Clearance required: BPSS Interview process: Tech IV Location: Remote with travel at set milestones. Leads site-level technical coordination for metering deployments Participates to site surveys (so will travel a lot at the beginning) and assessments as OT technical expert (instrumentation + IT/OT integration) Strong specialist in metering technologies, instrumentation, and automation Designs and validates connectivity architecture (PLCs, SCADA, gateways, PME) Oversees configuration, commissioning, and interface validation Ensures cybersecurity compliance with the support of the Cyber SME in the central team Drives robust coms integration Manages site-level documentation, change control, and testing Provides support to xxxx local teams Experience in L&S, sustainability solutions and especially Schneider PME & RA is a plus English speaker Reports to Project managers in each Cluster (by Geo) and the lead architect in the central technical team Detailed job description from the client We are seeking a highly skilled and motivated Technical Engineer to lead the design and deployment of industrial utilities metering solutions across xxxx sites. In this pivotal role, you will be responsible for conducting site assessments, selecting appropriate meters, designing installation plans, and integrating metering systems with OT/IT infrastructure. You will also ensure all solutions comply with international standards. By enabling precise monitoring of energy and resources, you will directly contribute to THE CLIENT's sustainability objectives and drive operational excellence. Key Responsibilities Perform on-site assessments to evaluate infrastructure and feasibility for installing electricity, gas, diesel, water, and wastewater meters, addressing mechanical, electrical, civil considerations, and challenges like complex or limited pipe runs and retrofits. Analyze engineering documentation including process flow diagrams, P&IDs, and electrical single-line diagrams to identify optimal meter technologies, sizes, and installation points. Provide recommendations for metering solutions that adhere to xxxx's standards, including the appropriate selection of meter type, accuracy class, and communication protocols, based on a thorough assessment and consideration of installation complexities, hazardous areas, fluid characteristics, and physical parameters. Design and implement meter connectivity architecture by integrating with PLCs, gateways, SCADA systems, and Schneider PME platforms. Collaborate with site engineering and OT/IT teams to define network requirements and ensure compliance with cybersecurity and OT boundary controls. Provide technical input to OEMs and installation contractors, supporting procurement and commissioning activities. Document 'as-is' and 'to-be' metering configurations, maintaining traceable records of design decisions and lessons learned. Skills and Experience Degree or equivalent in Electrical, Instrumentation, Automation or Control Engineering. Proven experience in industrial utilities metering (electricity, gas, steam, water, wastewater), ideally within pharmaceutical or process manufacturing environments. Strong understanding of flow measurement principles and metering technologies. Deep knowledge of communication protocols including Modbus TCP/RTU, Ethernet/IP, RS-485, and pulse/analog signals. Familiarity with PLCs, gateways, SCADA systems, and PME integration. Ability to interpret technical drawings and produce structured documentation. Excellent communication and stakeholder engagement skills. Training in Hazardous Area Equipment selection and installation fundamentals. Experience with global projects and working knowledge of both local and international standards (e.g. ATEX, CSA). Skilled in handling large datasets, particularly for energy data verification Expected Deliverables Site Assessment Reports with metering gap analysis. Recommended Meter Specifications and Connectivity Designs. Meter Layout Drawings, Maintenance and Calibration guide. Bill of Materials (BoM) for procurement with clear outline of scopes. Technical validation input for cost estimation and vendor quotations. JBRP1_UKTJ
06/12/2025
Full time
Metering Engineer Clearance required: BPSS Interview process: Tech IV Location: Remote with travel at set milestones. Leads site-level technical coordination for metering deployments Participates to site surveys (so will travel a lot at the beginning) and assessments as OT technical expert (instrumentation + IT/OT integration) Strong specialist in metering technologies, instrumentation, and automation Designs and validates connectivity architecture (PLCs, SCADA, gateways, PME) Oversees configuration, commissioning, and interface validation Ensures cybersecurity compliance with the support of the Cyber SME in the central team Drives robust coms integration Manages site-level documentation, change control, and testing Provides support to xxxx local teams Experience in L&S, sustainability solutions and especially Schneider PME & RA is a plus English speaker Reports to Project managers in each Cluster (by Geo) and the lead architect in the central technical team Detailed job description from the client We are seeking a highly skilled and motivated Technical Engineer to lead the design and deployment of industrial utilities metering solutions across xxxx sites. In this pivotal role, you will be responsible for conducting site assessments, selecting appropriate meters, designing installation plans, and integrating metering systems with OT/IT infrastructure. You will also ensure all solutions comply with international standards. By enabling precise monitoring of energy and resources, you will directly contribute to THE CLIENT's sustainability objectives and drive operational excellence. Key Responsibilities Perform on-site assessments to evaluate infrastructure and feasibility for installing electricity, gas, diesel, water, and wastewater meters, addressing mechanical, electrical, civil considerations, and challenges like complex or limited pipe runs and retrofits. Analyze engineering documentation including process flow diagrams, P&IDs, and electrical single-line diagrams to identify optimal meter technologies, sizes, and installation points. Provide recommendations for metering solutions that adhere to xxxx's standards, including the appropriate selection of meter type, accuracy class, and communication protocols, based on a thorough assessment and consideration of installation complexities, hazardous areas, fluid characteristics, and physical parameters. Design and implement meter connectivity architecture by integrating with PLCs, gateways, SCADA systems, and Schneider PME platforms. Collaborate with site engineering and OT/IT teams to define network requirements and ensure compliance with cybersecurity and OT boundary controls. Provide technical input to OEMs and installation contractors, supporting procurement and commissioning activities. Document 'as-is' and 'to-be' metering configurations, maintaining traceable records of design decisions and lessons learned. Skills and Experience Degree or equivalent in Electrical, Instrumentation, Automation or Control Engineering. Proven experience in industrial utilities metering (electricity, gas, steam, water, wastewater), ideally within pharmaceutical or process manufacturing environments. Strong understanding of flow measurement principles and metering technologies. Deep knowledge of communication protocols including Modbus TCP/RTU, Ethernet/IP, RS-485, and pulse/analog signals. Familiarity with PLCs, gateways, SCADA systems, and PME integration. Ability to interpret technical drawings and produce structured documentation. Excellent communication and stakeholder engagement skills. Training in Hazardous Area Equipment selection and installation fundamentals. Experience with global projects and working knowledge of both local and international standards (e.g. ATEX, CSA). Skilled in handling large datasets, particularly for energy data verification Expected Deliverables Site Assessment Reports with metering gap analysis. Recommended Meter Specifications and Connectivity Designs. Meter Layout Drawings, Maintenance and Calibration guide. Bill of Materials (BoM) for procurement with clear outline of scopes. Technical validation input for cost estimation and vendor quotations. JBRP1_UKTJ
Job Title: Control Systems Engineer Location: Birmingham Salary: Competitive (dependent on experience) Type: Permanent SRG are currently recruiting for a Control Systems Engineer to join a successful and growing client based near Birmingham. This is an exciting opportunity for an experienced professional to contribute to critical projects and maintenance activities in a fast-paced industrial environment. Responsibilities (including but not limited to): Diagnose and resolve control system issues to ensure smooth operations Design, specify, and install control and safety systems (including PLCs, BPCS, SIS, DCS, SCADA, HMI) Manage changes by reviewing proposals and implementing system modifications. Collaborate with internal teams and external partners such as suppliers, integrators, and contractors Promote a strong safety culture and ensure compliance with all legal and company standards Support training and development within the department. Criteria: Minimum HNC in Controls/Electronic/Instrument Engineering Strong experience with Allen Bradley systems (RSLogix 500, Studio 5000, FactoryTalk View) Knowledge of relevant standards (BS/IEC 61003, 61131, 61508, 61511, 62443) Understanding of functional safety, SIL, LOPA, and Safety Instrumented Systems Experience with communication protocols (Ethernet, DH+, Modbus, ProfiNet) Awareness of OT Cyber Security, IIoT, and AI is a plus. Previous exposure to chemical manufacturing, hazardous areas (ATEX), and instrumentation engineering preferred Proficiency with AutoCAD or similar tools. If interested, please apply or contact Julia for more information: / (phone number removed) Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy.
05/12/2025
Full time
Job Title: Control Systems Engineer Location: Birmingham Salary: Competitive (dependent on experience) Type: Permanent SRG are currently recruiting for a Control Systems Engineer to join a successful and growing client based near Birmingham. This is an exciting opportunity for an experienced professional to contribute to critical projects and maintenance activities in a fast-paced industrial environment. Responsibilities (including but not limited to): Diagnose and resolve control system issues to ensure smooth operations Design, specify, and install control and safety systems (including PLCs, BPCS, SIS, DCS, SCADA, HMI) Manage changes by reviewing proposals and implementing system modifications. Collaborate with internal teams and external partners such as suppliers, integrators, and contractors Promote a strong safety culture and ensure compliance with all legal and company standards Support training and development within the department. Criteria: Minimum HNC in Controls/Electronic/Instrument Engineering Strong experience with Allen Bradley systems (RSLogix 500, Studio 5000, FactoryTalk View) Knowledge of relevant standards (BS/IEC 61003, 61131, 61508, 61511, 62443) Understanding of functional safety, SIL, LOPA, and Safety Instrumented Systems Experience with communication protocols (Ethernet, DH+, Modbus, ProfiNet) Awareness of OT Cyber Security, IIoT, and AI is a plus. Previous exposure to chemical manufacturing, hazardous areas (ATEX), and instrumentation engineering preferred Proficiency with AutoCAD or similar tools. If interested, please apply or contact Julia for more information: / (phone number removed) Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy.
Metering Engineer Clearance required: BPSS Interview process: Tech IV Location: Remote with travel at set milestones. Leads site-level technical coordination for metering deployments Participates to site surveys (so will travel a lot at the beginning) and assessments as OT technical expert (instrumentation + IT/OT integration) Strong specialist in metering technologies, instrumentation, and automation Designs and validates connectivity architecture (PLCs, SCADA, gateways, PME) Oversees configuration, commissioning, and interface validation Ensures cybersecurity compliance with the support of the Cyber SME in the central team Drives robust coms integration Manages site-level documentation, change control, and testing Provides support to xxxx local teams Experience in L&S, sustainability solutions and especially Schneider PME & RA is a plus English speaker Reports to Project managers in each Cluster (by Geo) and the lead architect in the central technical team Detailed job description from the client We are seeking a highly skilled and motivated Technical Engineer to lead the design and deployment of industrial utilities metering solutions across xxxx sites. In this pivotal role, you will be responsible for conducting site assessments, selecting appropriate meters, designing installation plans, and integrating metering systems with OT/IT infrastructure. You will also ensure all solutions comply with international standards. By enabling precise monitoring of energy and resources, you will directly contribute to THE CLIENT's sustainability objectives and drive operational excellence. Key Responsibilities Perform on-site assessments to evaluate infrastructure and feasibility for installing electricity, gas, diesel, water, and wastewater meters, addressing mechanical, electrical, civil considerations, and challenges like complex or limited pipe runs and retrofits. Analyze engineering documentation including process flow diagrams, P&IDs, and electrical single-line diagrams to identify optimal meter technologies, sizes, and installation points. Provide recommendations for metering solutions that adhere to xxxx's standards, including the appropriate selection of meter type, accuracy class, and communication protocols, based on a thorough assessment and consideration of installation complexities, hazardous areas, fluid characteristics, and physical parameters. Design and implement meter connectivity architecture by integrating with PLCs, gateways, SCADA systems, and Schneider PME platforms. Collaborate with site engineering and OT/IT teams to define network requirements and ensure compliance with cybersecurity and OT boundary controls. Provide technical input to OEMs and installation contractors, supporting procurement and commissioning activities. Document "as-is" and "to-be" metering configurations, maintaining traceable records of design decisions and lessons learned. Skills and Experience Degree or equivalent in Electrical, Instrumentation, Automation or Control Engineering. Proven experience in industrial utilities metering (electricity, gas, steam, water, wastewater), ideally within pharmaceutical or process manufacturing environments. Strong understanding of flow measurement principles and metering technologies. Deep knowledge of communication protocols including Modbus TCP/RTU, Ethernet/IP, RS-485, and pulse/analog signals. Familiarity with PLCs, gateways, SCADA systems, and PME integration. Ability to interpret technical drawings and produce structured documentation. Excellent communication and stakeholder engagement skills. Training in Hazardous Area Equipment selection and installation fundamentals. Experience with global projects and working knowledge of both local and international standards (e.g. ATEX, CSA). Skilled in handling large datasets, particularly for energy data verification Expected Deliverables Site Assessment Reports with metering gap analysis. Recommended Meter Specifications and Connectivity Designs. Meter Layout Drawings, Maintenance and Calibration guide. Bill of Materials (BoM) for procurement with clear outline of scopes. Technical validation input for cost estimation and vendor quotations.
04/12/2025
Contractor
Metering Engineer Clearance required: BPSS Interview process: Tech IV Location: Remote with travel at set milestones. Leads site-level technical coordination for metering deployments Participates to site surveys (so will travel a lot at the beginning) and assessments as OT technical expert (instrumentation + IT/OT integration) Strong specialist in metering technologies, instrumentation, and automation Designs and validates connectivity architecture (PLCs, SCADA, gateways, PME) Oversees configuration, commissioning, and interface validation Ensures cybersecurity compliance with the support of the Cyber SME in the central team Drives robust coms integration Manages site-level documentation, change control, and testing Provides support to xxxx local teams Experience in L&S, sustainability solutions and especially Schneider PME & RA is a plus English speaker Reports to Project managers in each Cluster (by Geo) and the lead architect in the central technical team Detailed job description from the client We are seeking a highly skilled and motivated Technical Engineer to lead the design and deployment of industrial utilities metering solutions across xxxx sites. In this pivotal role, you will be responsible for conducting site assessments, selecting appropriate meters, designing installation plans, and integrating metering systems with OT/IT infrastructure. You will also ensure all solutions comply with international standards. By enabling precise monitoring of energy and resources, you will directly contribute to THE CLIENT's sustainability objectives and drive operational excellence. Key Responsibilities Perform on-site assessments to evaluate infrastructure and feasibility for installing electricity, gas, diesel, water, and wastewater meters, addressing mechanical, electrical, civil considerations, and challenges like complex or limited pipe runs and retrofits. Analyze engineering documentation including process flow diagrams, P&IDs, and electrical single-line diagrams to identify optimal meter technologies, sizes, and installation points. Provide recommendations for metering solutions that adhere to xxxx's standards, including the appropriate selection of meter type, accuracy class, and communication protocols, based on a thorough assessment and consideration of installation complexities, hazardous areas, fluid characteristics, and physical parameters. Design and implement meter connectivity architecture by integrating with PLCs, gateways, SCADA systems, and Schneider PME platforms. Collaborate with site engineering and OT/IT teams to define network requirements and ensure compliance with cybersecurity and OT boundary controls. Provide technical input to OEMs and installation contractors, supporting procurement and commissioning activities. Document "as-is" and "to-be" metering configurations, maintaining traceable records of design decisions and lessons learned. Skills and Experience Degree or equivalent in Electrical, Instrumentation, Automation or Control Engineering. Proven experience in industrial utilities metering (electricity, gas, steam, water, wastewater), ideally within pharmaceutical or process manufacturing environments. Strong understanding of flow measurement principles and metering technologies. Deep knowledge of communication protocols including Modbus TCP/RTU, Ethernet/IP, RS-485, and pulse/analog signals. Familiarity with PLCs, gateways, SCADA systems, and PME integration. Ability to interpret technical drawings and produce structured documentation. Excellent communication and stakeholder engagement skills. Training in Hazardous Area Equipment selection and installation fundamentals. Experience with global projects and working knowledge of both local and international standards (e.g. ATEX, CSA). Skilled in handling large datasets, particularly for energy data verification Expected Deliverables Site Assessment Reports with metering gap analysis. Recommended Meter Specifications and Connectivity Designs. Meter Layout Drawings, Maintenance and Calibration guide. Bill of Materials (BoM) for procurement with clear outline of scopes. Technical validation input for cost estimation and vendor quotations.
Are you a skilled Control Systems Engineer ready to take on varied, high-impact projects in the North East? We re working with a fast-growing, independently owned automation specialist delivering cutting-edge control systems to some of the most recognised names in the industry. Supporting food & beverage, pharmaceutical and utilities to high-security industries such as defence, aerospace and nuclear. They champion innovation, embrace complex challenges and take pride in their delivery. With a healthy project pipeline they are looking to bring talented engineers into their team. Control Systems Engineers £40,000 £70,000 DOE + Pension + Healthcare + Life Assurance Excellent training & development opportunities. Newcastle. Ref: 23824 Controls Engineer - The Role: Design, configure and develop PLC & SCADA systems for a range of industrial automation projects Produce functional design specifications and test documentation ( FDS, FAT/SAT) Manage full project life cycles from initial design to on-site commissioning Liaise with clients and subcontractors to ensure seamless delivery. Travel across the UK (c20%) to support commissioning and client interaction. Controls Engineer - The Person: Solid experience in real-time control systems design and commissioning. Proficient in PLC programming (Rockwell, Siemens, Mitsubishi, Schneider). SCADA design experience preferred essential for senior-level roles. Previous experience within a systems integrator environment Comfortable managing documentation and project processes. Degree-qualified (or equivalent experience) and a full UK driving licence. We are keen to see Control Systems Engineers with experience of the following packages: PLC Software Rockwell, Siemens, Mitsubishi, Schneider HMI/SCADA Software Rockwell FTView ME & SE, AVEVA InTouch & System Platform, Schneider ClearSCADA GEiFIX, Siemens WinCC This is an excellent opportunity to join a business with a heritage of over 100 years and a current order book approaching £1Bn. They offer a clear career path, on-going professional training including Chartership and a collaborative working environment. Preferably you will be degree qualified with background in a similar role. Strong communication skills are needed along with a full UK valid driving licence. For further information call Sharon Hill
04/12/2025
Full time
Are you a skilled Control Systems Engineer ready to take on varied, high-impact projects in the North East? We re working with a fast-growing, independently owned automation specialist delivering cutting-edge control systems to some of the most recognised names in the industry. Supporting food & beverage, pharmaceutical and utilities to high-security industries such as defence, aerospace and nuclear. They champion innovation, embrace complex challenges and take pride in their delivery. With a healthy project pipeline they are looking to bring talented engineers into their team. Control Systems Engineers £40,000 £70,000 DOE + Pension + Healthcare + Life Assurance Excellent training & development opportunities. Newcastle. Ref: 23824 Controls Engineer - The Role: Design, configure and develop PLC & SCADA systems for a range of industrial automation projects Produce functional design specifications and test documentation ( FDS, FAT/SAT) Manage full project life cycles from initial design to on-site commissioning Liaise with clients and subcontractors to ensure seamless delivery. Travel across the UK (c20%) to support commissioning and client interaction. Controls Engineer - The Person: Solid experience in real-time control systems design and commissioning. Proficient in PLC programming (Rockwell, Siemens, Mitsubishi, Schneider). SCADA design experience preferred essential for senior-level roles. Previous experience within a systems integrator environment Comfortable managing documentation and project processes. Degree-qualified (or equivalent experience) and a full UK driving licence. We are keen to see Control Systems Engineers with experience of the following packages: PLC Software Rockwell, Siemens, Mitsubishi, Schneider HMI/SCADA Software Rockwell FTView ME & SE, AVEVA InTouch & System Platform, Schneider ClearSCADA GEiFIX, Siemens WinCC This is an excellent opportunity to join a business with a heritage of over 100 years and a current order book approaching £1Bn. They offer a clear career path, on-going professional training including Chartership and a collaborative working environment. Preferably you will be degree qualified with background in a similar role. Strong communication skills are needed along with a full UK valid driving licence. For further information call Sharon Hill
We are looking for a highly skilled Senior Automation Engineer to lead complex automation projects, support continuous improvement across company operations, and provide senior-level expertise in PLC programming, control systems and machine safety. This is an excellent opportunity for an experienced engineer to take ownership of major automation initiatives within a growing organisation. Control & Automation Engineer £50-70k + Flexible Hours + Company Vehicle + Overtime East Yorkshire Ref- 24778 Lead the design, development, and optimisation of PLC-based automation systems Oversee the design, build, and maintenance of electrical control panels Produce, review, and approve electrical drawings using AutoCAD and/or EPLAN Interpret and troubleshoot electrical and panel schematics Provide technical leadership during machine build, installation, and commissioning Ensure full compliance with industrial, electrical, and machine safety standards Work with power systems and electrical system design Design, integrate, and support SCADA systems Support and optimise pneumatic systems and automation components Apply ATEX requirements and ensure safe working practices in hazardous areas Act as a senior point of contact for manufacturing support, including food and industrial environments Mentor junior engineers and support technical decision-making across teams Travel to customer sites as required (valid driving licence essential) Research and analyse customer requirements to identify effective control and automation solutions. Requirements: Strong, proven PLC programming experience Extensive experience in control panel design/build/maintenance Full driving licence Experience with power systems and electrical design Proficiency with AutoCAD and/or EPLAN Manufacturing environment experience (food industry beneficial) Demonstrated knowledge of industrial safety and machine safety SCADA system experience ATEX knowledge and hazardous area experience Strong understanding of pneumatic systems Excellent troubleshooting skills and the ability to lead complex technical projects For further information call Sharon Hill
04/12/2025
Full time
We are looking for a highly skilled Senior Automation Engineer to lead complex automation projects, support continuous improvement across company operations, and provide senior-level expertise in PLC programming, control systems and machine safety. This is an excellent opportunity for an experienced engineer to take ownership of major automation initiatives within a growing organisation. Control & Automation Engineer £50-70k + Flexible Hours + Company Vehicle + Overtime East Yorkshire Ref- 24778 Lead the design, development, and optimisation of PLC-based automation systems Oversee the design, build, and maintenance of electrical control panels Produce, review, and approve electrical drawings using AutoCAD and/or EPLAN Interpret and troubleshoot electrical and panel schematics Provide technical leadership during machine build, installation, and commissioning Ensure full compliance with industrial, electrical, and machine safety standards Work with power systems and electrical system design Design, integrate, and support SCADA systems Support and optimise pneumatic systems and automation components Apply ATEX requirements and ensure safe working practices in hazardous areas Act as a senior point of contact for manufacturing support, including food and industrial environments Mentor junior engineers and support technical decision-making across teams Travel to customer sites as required (valid driving licence essential) Research and analyse customer requirements to identify effective control and automation solutions. Requirements: Strong, proven PLC programming experience Extensive experience in control panel design/build/maintenance Full driving licence Experience with power systems and electrical design Proficiency with AutoCAD and/or EPLAN Manufacturing environment experience (food industry beneficial) Demonstrated knowledge of industrial safety and machine safety SCADA system experience ATEX knowledge and hazardous area experience Strong understanding of pneumatic systems Excellent troubleshooting skills and the ability to lead complex technical projects For further information call Sharon Hill
A leading multidisciplinary design and build contractor in the UK with over a century of industry experience are currently on the lookout for an experienced Lead Controls Engineer to join a dynamic team and contribute to ongoing success in the Water, Power & Energy, Pharmaceutical, and Food and Beverage sectors. This company prides themselves on being at the forefront of value-added engineering. They have a strong track record of supporting blue-chip clients across various industries, with a cultivated culture that promotes personal development and ensures the safety of our employees. Lead Control Systems Engineer £50-55k + Car Allowance A key role delivering automation projects across the entire project lifecycle Join a large team of controls & automation engineers across multiple UK locations Staffordshire based role. Ref: 24058 Lead Control Systems Engineer - The Role: You will take charge of complex control system projects, either independently or leading a team of 3-5 engineers You will be involved in all stages of the project, from creating design documentation to developing control software, testing, commissioning and handover If leading a team, you will manage the workload and progress of your team members, working closely with the Project Manager to meet contractual project milestones You will review design documents and test the software developed by your team members Lead Control Systems Engineer - The Person: Strong knowledge of safe working practices Good organisational and communication skills at all levels A positive, approachable, willing and helpful attitude PLC and HMI software development experience using at least two manufacturers devices from Rockwell Automation, Siemens, Mitsubishi or Schneider Experience with multiple communication protocols and working with SCADA systems and VSDs Knowledge and experience in virtual machines (VMWare) Excellent IT skills including the use of Microsoft Word & Excel Ability to act on own initiative A full UK driving licence If you have a proven track record in delivering control and automation projects to major UK clients in the Water, Industrial Automation or Process sectors, this is the perfect opportunity for you. For further information call Sharon Hill
04/12/2025
Full time
A leading multidisciplinary design and build contractor in the UK with over a century of industry experience are currently on the lookout for an experienced Lead Controls Engineer to join a dynamic team and contribute to ongoing success in the Water, Power & Energy, Pharmaceutical, and Food and Beverage sectors. This company prides themselves on being at the forefront of value-added engineering. They have a strong track record of supporting blue-chip clients across various industries, with a cultivated culture that promotes personal development and ensures the safety of our employees. Lead Control Systems Engineer £50-55k + Car Allowance A key role delivering automation projects across the entire project lifecycle Join a large team of controls & automation engineers across multiple UK locations Staffordshire based role. Ref: 24058 Lead Control Systems Engineer - The Role: You will take charge of complex control system projects, either independently or leading a team of 3-5 engineers You will be involved in all stages of the project, from creating design documentation to developing control software, testing, commissioning and handover If leading a team, you will manage the workload and progress of your team members, working closely with the Project Manager to meet contractual project milestones You will review design documents and test the software developed by your team members Lead Control Systems Engineer - The Person: Strong knowledge of safe working practices Good organisational and communication skills at all levels A positive, approachable, willing and helpful attitude PLC and HMI software development experience using at least two manufacturers devices from Rockwell Automation, Siemens, Mitsubishi or Schneider Experience with multiple communication protocols and working with SCADA systems and VSDs Knowledge and experience in virtual machines (VMWare) Excellent IT skills including the use of Microsoft Word & Excel Ability to act on own initiative A full UK driving licence If you have a proven track record in delivering control and automation projects to major UK clients in the Water, Industrial Automation or Process sectors, this is the perfect opportunity for you. For further information call Sharon Hill
Metering Engineer Clearance required: BPSS Interview process: Tech IV Location: Remote with travel at set milestones. IR35 Status: PAYE via Umbrella company only Job Description: . Leads site-level technical coordination for metering deployments . Participates to site surveys (so will travel a lot at the beginning) and assessments as OT technical expert (instrumentation + IT/OT integration) . Strong specialist in metering technologies, instrumentation, and automation . Designs and validates connectivity architecture (PLCs, SCADA, gateways, PME) . Oversees configuration, commissioning, and interface validation . Ensures cybersecurity compliance with the support of the Cyber SME in the central team . Drives robust coms integration . Manages site-level documentation, change control, and testing . Provides support to xxxx local teams . Experience in L&S, sustainability solutions and especially Schneider PME & RA is a plus . English speaker . Reports to Project managers in each Cluster (by Geo) and the lead architect in the central technical team Detailed job description from the client We are seeking a highly skilled and motivated Technical Engineer to lead the design and deployment of industrial utilities metering solutions across xxxx sites. In this pivotal role, you will be responsible for conducting site assessments, selecting appropriate meters, designing installation plans, and integrating metering systems with OT/IT infrastructure. You will also ensure all solutions comply with international standards. By enabling precise monitoring of energy and resources, you will directly contribute to THE CLIENT's sustainability objectives and drive operational excellence. Key Responsibilities Perform on-site assessments to evaluate infrastructure and feasibility for installing electricity, gas, diesel, water, and wastewater meters, addressing mechanical, electrical, civil considerations, and challenges like complex or limited pipe runs and retrofits. Analyze engineering documentation including process flow diagrams, P&IDs, and electrical single-line diagrams to identify optimal meter technologies, sizes, and installation points. Provide recommendations for metering solutions that adhere to xxxx's standards, including the appropriate selection of meter type, accuracy class, and communication protocols, based on a thorough assessment and consideration of installation complexities, hazardous areas, fluid characteristics, and physical parameters. Design and implement meter connectivity architecture by integrating with PLCs, gateways, SCADA systems, and Schneider PME platforms. Collaborate with site engineering and OT/IT teams to define network requirements and ensure compliance with cybersecurity and OT boundary controls. Provide technical input to OEMs and installation contractors, supporting procurement and commissioning activities. Document as-is and to-be metering configurations, maintaining traceable records of design decisions and lessons learned. Skills and Experience Degree or equivalent in Electrical, Instrumentation, Automation or Control Engineering. Proven experience in industrial utilities metering (electricity, gas, steam, water, wastewater), ideally within pharmaceutical or process manufacturing environments. Strong understanding of flow measurement principles and metering technologies. Deep knowledge of communication protocols including Modbus TCP/RTU, Ethernet/IP, RS-485, and pulse/analog signals. Familiarity with PLCs, gateways, SCADA systems, and PME integration. Ability to interpret technical drawings and produce structured documentation. Excellent communication and stakeholder engagement skills. Training in Hazardous Area Equipment selection and installation fundamentals. Experience with global projects and working knowledge of both local and international standards (eg ATEX, CSA). Skilled in handling large datasets, particularly for energy data verification Expected Deliverables Site Assessment Reports with metering gap analysis. Recommended Meter Specifications and Connectivity Designs. Meter Layout Drawings, Maintenance and Calibration guide. Bill of Materials (BoM) for procurement with clear outline of scopes. Technical validation input for cost estimation and vendor quotations. Behavioral Competencies Aligned with xxxx's values and expectations, the ideal candidate will demonstrate: Integrity & Transparency: Upholding high ethical standards and communicating openly. Respect & Inclusion: Supporting colleagues and embracing diverse perspectives. Accountability: Taking ownership and delivering on commitments. Courage & Development: Seeking innovation, learning from feedback, and adapting to change. Teamwork: Collaborating effectively across functions to achieve shared goals.
04/12/2025
Contractor
Metering Engineer Clearance required: BPSS Interview process: Tech IV Location: Remote with travel at set milestones. IR35 Status: PAYE via Umbrella company only Job Description: . Leads site-level technical coordination for metering deployments . Participates to site surveys (so will travel a lot at the beginning) and assessments as OT technical expert (instrumentation + IT/OT integration) . Strong specialist in metering technologies, instrumentation, and automation . Designs and validates connectivity architecture (PLCs, SCADA, gateways, PME) . Oversees configuration, commissioning, and interface validation . Ensures cybersecurity compliance with the support of the Cyber SME in the central team . Drives robust coms integration . Manages site-level documentation, change control, and testing . Provides support to xxxx local teams . Experience in L&S, sustainability solutions and especially Schneider PME & RA is a plus . English speaker . Reports to Project managers in each Cluster (by Geo) and the lead architect in the central technical team Detailed job description from the client We are seeking a highly skilled and motivated Technical Engineer to lead the design and deployment of industrial utilities metering solutions across xxxx sites. In this pivotal role, you will be responsible for conducting site assessments, selecting appropriate meters, designing installation plans, and integrating metering systems with OT/IT infrastructure. You will also ensure all solutions comply with international standards. By enabling precise monitoring of energy and resources, you will directly contribute to THE CLIENT's sustainability objectives and drive operational excellence. Key Responsibilities Perform on-site assessments to evaluate infrastructure and feasibility for installing electricity, gas, diesel, water, and wastewater meters, addressing mechanical, electrical, civil considerations, and challenges like complex or limited pipe runs and retrofits. Analyze engineering documentation including process flow diagrams, P&IDs, and electrical single-line diagrams to identify optimal meter technologies, sizes, and installation points. Provide recommendations for metering solutions that adhere to xxxx's standards, including the appropriate selection of meter type, accuracy class, and communication protocols, based on a thorough assessment and consideration of installation complexities, hazardous areas, fluid characteristics, and physical parameters. Design and implement meter connectivity architecture by integrating with PLCs, gateways, SCADA systems, and Schneider PME platforms. Collaborate with site engineering and OT/IT teams to define network requirements and ensure compliance with cybersecurity and OT boundary controls. Provide technical input to OEMs and installation contractors, supporting procurement and commissioning activities. Document as-is and to-be metering configurations, maintaining traceable records of design decisions and lessons learned. Skills and Experience Degree or equivalent in Electrical, Instrumentation, Automation or Control Engineering. Proven experience in industrial utilities metering (electricity, gas, steam, water, wastewater), ideally within pharmaceutical or process manufacturing environments. Strong understanding of flow measurement principles and metering technologies. Deep knowledge of communication protocols including Modbus TCP/RTU, Ethernet/IP, RS-485, and pulse/analog signals. Familiarity with PLCs, gateways, SCADA systems, and PME integration. Ability to interpret technical drawings and produce structured documentation. Excellent communication and stakeholder engagement skills. Training in Hazardous Area Equipment selection and installation fundamentals. Experience with global projects and working knowledge of both local and international standards (eg ATEX, CSA). Skilled in handling large datasets, particularly for energy data verification Expected Deliverables Site Assessment Reports with metering gap analysis. Recommended Meter Specifications and Connectivity Designs. Meter Layout Drawings, Maintenance and Calibration guide. Bill of Materials (BoM) for procurement with clear outline of scopes. Technical validation input for cost estimation and vendor quotations. Behavioral Competencies Aligned with xxxx's values and expectations, the ideal candidate will demonstrate: Integrity & Transparency: Upholding high ethical standards and communicating openly. Respect & Inclusion: Supporting colleagues and embracing diverse perspectives. Accountability: Taking ownership and delivering on commitments. Courage & Development: Seeking innovation, learning from feedback, and adapting to change. Teamwork: Collaborating effectively across functions to achieve shared goals.
We are a Global Recruitment specialist that provides support to the clients across EMEA, APAC, US and Canada Job Title: Metering Engineer Clearance required: BPSS Contract: 20 Months Location: Remote with travel at set milestones. IR35 Status: PAYE via Umbrella company only Job Description: Leads site-level technical coordination for metering deployments Participates to site surveys (so will travel a lot at the beginning) and assessments as OT technical expert (instrumentation + IT/OT integration) Strong specialist in metering technologies, instrumentation, and automation Designs and validates connectivity architecture (PLCs, SCADA, gateways, PME) Oversees configuration, commissioning, and interface validation Ensures cybersecurity compliance with the support of the Cyber SME in the central team Drives robust coms integration Manages site-level documentation, change control, and testing Provides support to xxxx local teams Experience in L&S, sustainability solutions and especially Schneider PME & RA is a plus English speaker Reports to Project managers in each Cluster (by Geo) and the lead architect in the central technical team Detailed job description from the client We are seeking a highly skilled and motivated Technical Engineer to lead the design and deployment of industrial utilities metering solutions across xxxx sites. In this pivotal role, you will be responsible for conducting site assessments, selecting appropriate meters, designing installation plans, and integrating metering systems with OT/IT infrastructure. You will also ensure all solutions comply with international standards. By enabling precise monitoring of energy and resources, you will directly contribute to THE CLIENT's sustainability objectives and drive operational excellence. Key Responsibilities Perform on-site assessments to evaluate infrastructure and feasibility for installing electricity, gas, diesel, water, and wastewater meters, addressing mechanical, electrical, civil considerations, and challenges like complex or limited pipe runs and retrofits. Analyze engineering documentation including process flow diagrams, P&IDs, and electrical single-line diagrams to identify optimal meter technologies, sizes, and installation points. Provide recommendations for metering solutions that adhere to xxxx's standards, including the appropriate selection of meter type, accuracy class, and communication protocols, based on a thorough assessment and consideration of installation complexities, hazardous areas, fluid characteristics, and physical parameters. Design and implement meter connectivity architecture by integrating with PLCs, gateways, SCADA systems, and Schneider PME platforms. Collaborate with site engineering and OT/IT teams to define network requirements and ensure compliance with cybersecurity and OT boundary controls. Provide technical input to OEMs and installation contractors, supporting procurement and commissioning activities. Document as-is and to-be metering configurations, maintaining traceable records of design decisions and lessons learned. Skills and Experience Degree or equivalent in Electrical, Instrumentation, Automation or Control Engineering. Proven experience in industrial utilities metering (electricity, gas, steam, water, wastewater), ideally within pharmaceutical or process manufacturing environments. Strong understanding of flow measurement principles and metering technologies. Deep knowledge of communication protocols including Modbus TCP/RTU, Ethernet/IP, RS-485, and pulse/analog signals. Familiarity with PLCs, gateways, SCADA systems, and PME integration. Ability to interpret technical drawings and produce structured documentation. Excellent communication and stakeholder engagement skills. Training in Hazardous Area Equipment selection and installation fundamentals. Experience with global projects and working knowledge of both local and international standards (eg ATEX, CSA). Skilled in handling large datasets, particularly for energy data verification Expected Deliverables Site Assessment Reports with metering gap analysis. Recommended Meter Specifications and Connectivity Designs. Meter Layout Drawings, Maintenance and Calibration guide. Bill of Materials (BoM) for procurement with clear outline of scopes. Technical validation input for cost estimation and vendor quotations. Behavioral Competencies Integrity & Transparency: Upholding high ethical standards and communicating openly. Respect & Inclusion: Supporting colleagues and embracing diverse perspectives. Accountability: Taking ownership and delivering on commitments. Courage & Development: Seeking innovation, learning from feedback, and adapting to change. Teamwork: Collaborating effectively across functions to achieve shared goals.
04/12/2025
Contractor
We are a Global Recruitment specialist that provides support to the clients across EMEA, APAC, US and Canada Job Title: Metering Engineer Clearance required: BPSS Contract: 20 Months Location: Remote with travel at set milestones. IR35 Status: PAYE via Umbrella company only Job Description: Leads site-level technical coordination for metering deployments Participates to site surveys (so will travel a lot at the beginning) and assessments as OT technical expert (instrumentation + IT/OT integration) Strong specialist in metering technologies, instrumentation, and automation Designs and validates connectivity architecture (PLCs, SCADA, gateways, PME) Oversees configuration, commissioning, and interface validation Ensures cybersecurity compliance with the support of the Cyber SME in the central team Drives robust coms integration Manages site-level documentation, change control, and testing Provides support to xxxx local teams Experience in L&S, sustainability solutions and especially Schneider PME & RA is a plus English speaker Reports to Project managers in each Cluster (by Geo) and the lead architect in the central technical team Detailed job description from the client We are seeking a highly skilled and motivated Technical Engineer to lead the design and deployment of industrial utilities metering solutions across xxxx sites. In this pivotal role, you will be responsible for conducting site assessments, selecting appropriate meters, designing installation plans, and integrating metering systems with OT/IT infrastructure. You will also ensure all solutions comply with international standards. By enabling precise monitoring of energy and resources, you will directly contribute to THE CLIENT's sustainability objectives and drive operational excellence. Key Responsibilities Perform on-site assessments to evaluate infrastructure and feasibility for installing electricity, gas, diesel, water, and wastewater meters, addressing mechanical, electrical, civil considerations, and challenges like complex or limited pipe runs and retrofits. Analyze engineering documentation including process flow diagrams, P&IDs, and electrical single-line diagrams to identify optimal meter technologies, sizes, and installation points. Provide recommendations for metering solutions that adhere to xxxx's standards, including the appropriate selection of meter type, accuracy class, and communication protocols, based on a thorough assessment and consideration of installation complexities, hazardous areas, fluid characteristics, and physical parameters. Design and implement meter connectivity architecture by integrating with PLCs, gateways, SCADA systems, and Schneider PME platforms. Collaborate with site engineering and OT/IT teams to define network requirements and ensure compliance with cybersecurity and OT boundary controls. Provide technical input to OEMs and installation contractors, supporting procurement and commissioning activities. Document as-is and to-be metering configurations, maintaining traceable records of design decisions and lessons learned. Skills and Experience Degree or equivalent in Electrical, Instrumentation, Automation or Control Engineering. Proven experience in industrial utilities metering (electricity, gas, steam, water, wastewater), ideally within pharmaceutical or process manufacturing environments. Strong understanding of flow measurement principles and metering technologies. Deep knowledge of communication protocols including Modbus TCP/RTU, Ethernet/IP, RS-485, and pulse/analog signals. Familiarity with PLCs, gateways, SCADA systems, and PME integration. Ability to interpret technical drawings and produce structured documentation. Excellent communication and stakeholder engagement skills. Training in Hazardous Area Equipment selection and installation fundamentals. Experience with global projects and working knowledge of both local and international standards (eg ATEX, CSA). Skilled in handling large datasets, particularly for energy data verification Expected Deliverables Site Assessment Reports with metering gap analysis. Recommended Meter Specifications and Connectivity Designs. Meter Layout Drawings, Maintenance and Calibration guide. Bill of Materials (BoM) for procurement with clear outline of scopes. Technical validation input for cost estimation and vendor quotations. Behavioral Competencies Integrity & Transparency: Upholding high ethical standards and communicating openly. Respect & Inclusion: Supporting colleagues and embracing diverse perspectives. Accountability: Taking ownership and delivering on commitments. Courage & Development: Seeking innovation, learning from feedback, and adapting to change. Teamwork: Collaborating effectively across functions to achieve shared goals.
Alexander Steele has partnered with a leading global food manufacturer that has an exciting opportunity for a Control & Automation specialist to join their Operational Technology (OT) team, and lead the control and automation systems infrastructure strategy for their UK factories. Your focus will be on obsolescence, security, new installations, hardware and software standards, and driving new OT solutions to deliver supply chain improvements. Key responsibilities Collaborate with cross-functional teams, including site engineering, projects, and manufacturing teams, to proactively manage the OT environment Provide Operational Technology support and project delivery across assigned factories in the UK. Liaise with maintenance technicians and project teams to support factory automation infrastructure. Document systems at respective factories and share knowledge with the wider team. Manage installations to ensure compliance with statutory regulations and group standards. Create and maintain a roadmap for systems development and technology obsolescence. Manage 3rd party contractors for project implementation and support purposes. Candidate Requirements Engineering qualification in relevant discipline such as Control & Automation, Mechatronics, Electronics, Electrical, Mechanical, Computer Science, Information Technology or equivalent. At least 5 years experience in a complex control and automation systems environment. Good technical knowledge and experience of controls and automation systems, including Siemens PLCs, WinCC SCADA, Iconics Genesis SCADA or Rockwell Logix platform. Good IT experience and technical knowledge of IP networking, Windows OS configuration, SQL Server management, OPC configuration, Active Directory, SCCM, Intune or Defender. On Offer: £55K to £60K + Car Allowance + 10% Bonus Pension + Private Healthcare 25 leave days + 8 bank holidays Homebased role (commuting 1 to 2 days a week to Liverpool based factory)
03/12/2025
Full time
Alexander Steele has partnered with a leading global food manufacturer that has an exciting opportunity for a Control & Automation specialist to join their Operational Technology (OT) team, and lead the control and automation systems infrastructure strategy for their UK factories. Your focus will be on obsolescence, security, new installations, hardware and software standards, and driving new OT solutions to deliver supply chain improvements. Key responsibilities Collaborate with cross-functional teams, including site engineering, projects, and manufacturing teams, to proactively manage the OT environment Provide Operational Technology support and project delivery across assigned factories in the UK. Liaise with maintenance technicians and project teams to support factory automation infrastructure. Document systems at respective factories and share knowledge with the wider team. Manage installations to ensure compliance with statutory regulations and group standards. Create and maintain a roadmap for systems development and technology obsolescence. Manage 3rd party contractors for project implementation and support purposes. Candidate Requirements Engineering qualification in relevant discipline such as Control & Automation, Mechatronics, Electronics, Electrical, Mechanical, Computer Science, Information Technology or equivalent. At least 5 years experience in a complex control and automation systems environment. Good technical knowledge and experience of controls and automation systems, including Siemens PLCs, WinCC SCADA, Iconics Genesis SCADA or Rockwell Logix platform. Good IT experience and technical knowledge of IP networking, Windows OS configuration, SQL Server management, OPC configuration, Active Directory, SCCM, Intune or Defender. On Offer: £55K to £60K + Car Allowance + 10% Bonus Pension + Private Healthcare 25 leave days + 8 bank holidays Homebased role (commuting 1 to 2 days a week to Liverpool based factory)
Control Systems Engineer West Bromwich 50,000 Monday to Friday (8am-4pm) Benefits:- 33 Days Holiday Company Pension Scheme Life Assurance We are looking for a Control Systems Engineer to join our manufacturing client in West Brom. They are a leading manufacturer, supplying bespoke solutions to their customers, which creates massive variety for this person. Role & Responsibilities: Working in a large engineering department of 40+ engineers, with electrical, mechanical and project engineering skillsets Responsible for all controls and instrumentation on site Design, specification and installation of control and safety systems (PLCs / BPCS / SIS / DCS / SCADA / HMI) PLC programming and modification of existing PLCs (Allen Bradley) Knowledge, Skills & Experience: Strong experience in configuration and programming of Allen Bradley PLCs Knowledge of BS / IEC 61508, 61511, 62443, 61003 standards Understanding of function safety, SIL, LOPA and safety instrumented systems Experience in an hazardous environment and understanding of ATEX regulations If you're interested apply now or contact Jacob at Hunter Selection for more information. If you are interested in this position please click 'apply'. Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors. Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
03/12/2025
Full time
Control Systems Engineer West Bromwich 50,000 Monday to Friday (8am-4pm) Benefits:- 33 Days Holiday Company Pension Scheme Life Assurance We are looking for a Control Systems Engineer to join our manufacturing client in West Brom. They are a leading manufacturer, supplying bespoke solutions to their customers, which creates massive variety for this person. Role & Responsibilities: Working in a large engineering department of 40+ engineers, with electrical, mechanical and project engineering skillsets Responsible for all controls and instrumentation on site Design, specification and installation of control and safety systems (PLCs / BPCS / SIS / DCS / SCADA / HMI) PLC programming and modification of existing PLCs (Allen Bradley) Knowledge, Skills & Experience: Strong experience in configuration and programming of Allen Bradley PLCs Knowledge of BS / IEC 61508, 61511, 62443, 61003 standards Understanding of function safety, SIL, LOPA and safety instrumented systems Experience in an hazardous environment and understanding of ATEX regulations If you're interested apply now or contact Jacob at Hunter Selection for more information. If you are interested in this position please click 'apply'. Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors. Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
As Control Systems Engineer, you'll own the full lifecycle of automation control and safety systems - from concept through commissioning. Working alongside production, maintenance, and engineering, you'll ensure critical assets run safely, efficiently, and reliably. Client Details Our client is a specialist manufacturer with multiple sites across the UK and a strong international footprint. They operate in a niche industrial sector with continual investment in automation and process innovation. Their Lydney facility is undergoing a period of expansion, with major upgrades to safety systems, controls, and production technology - creating an exciting opportunity for a skilled engineer to make an immediate impact. Description Key Responsibilities Design, program, and commission PLC and motion control systems (Siemens TIA/Step7, Mitsubishi, Beckhoff). Develop and integrate functional safety systems (light curtains, scanners, safety PLCs, interlocks). Create and maintain documentation - FDS/URS, risk assessments, validation plans, and AutoCAD drawings. Deliver SCADA/HMI systems with data acquisition, alarm, and diagnostic capability. Lead automation projects from concept through to handover. Troubleshoot chronic faults, drive root-cause fixes, and lead system upgrades. Support production and maintenance teams with training, diagnostics, and technical guidance. Maintain governance on version control, change management, and site standards. Profile The Ideal Candidate Experienced in PLC/HMI design and commissioning (Siemens TIA/Step7; Mitsubishi GX; Beckhoff). Proven background in functional safety integration and validation (ISO 13849 / IEC 62061). Strong understanding of industrial networking, sensors, and drive systems. Confident in HMI/SCADA development (Zenon or similar) and fault diagnostics. HNC or equivalent in Electrical, Controls or Mechatronics; time-served apprenticeship preferred. Comfortable working hands-on in a production environment, collaborating with multidisciplinary teams. Excellent communicator with disciplined documentation and change control habits. Job Offer Excellent salary and benefits.
02/12/2025
Full time
As Control Systems Engineer, you'll own the full lifecycle of automation control and safety systems - from concept through commissioning. Working alongside production, maintenance, and engineering, you'll ensure critical assets run safely, efficiently, and reliably. Client Details Our client is a specialist manufacturer with multiple sites across the UK and a strong international footprint. They operate in a niche industrial sector with continual investment in automation and process innovation. Their Lydney facility is undergoing a period of expansion, with major upgrades to safety systems, controls, and production technology - creating an exciting opportunity for a skilled engineer to make an immediate impact. Description Key Responsibilities Design, program, and commission PLC and motion control systems (Siemens TIA/Step7, Mitsubishi, Beckhoff). Develop and integrate functional safety systems (light curtains, scanners, safety PLCs, interlocks). Create and maintain documentation - FDS/URS, risk assessments, validation plans, and AutoCAD drawings. Deliver SCADA/HMI systems with data acquisition, alarm, and diagnostic capability. Lead automation projects from concept through to handover. Troubleshoot chronic faults, drive root-cause fixes, and lead system upgrades. Support production and maintenance teams with training, diagnostics, and technical guidance. Maintain governance on version control, change management, and site standards. Profile The Ideal Candidate Experienced in PLC/HMI design and commissioning (Siemens TIA/Step7; Mitsubishi GX; Beckhoff). Proven background in functional safety integration and validation (ISO 13849 / IEC 62061). Strong understanding of industrial networking, sensors, and drive systems. Confident in HMI/SCADA development (Zenon or similar) and fault diagnostics. HNC or equivalent in Electrical, Controls or Mechatronics; time-served apprenticeship preferred. Comfortable working hands-on in a production environment, collaborating with multidisciplinary teams. Excellent communicator with disciplined documentation and change control habits. Job Offer Excellent salary and benefits.
Do you love problem-solving, tinkering with PLCs, and keeping complex systems running like clockwork? If you're nodding, then please keep reading. We're on the hunt for a Controls & Automation Engineer who s not just good with wires and code but thrives in the challenges of working within an industrial environment. What you ll be doing: Keeping site control systems running smoothly and fixing them fast when they re not. Provide control systems expertise, undertake troubleshooting activities as required. Lead site control system maintenance projects and support site electrical engineering activities Maintain and update drawings for site control systems Ensure personnel working on site for control system works, comply with the site HSEQ standards. Collaborating with ops, suppliers, and contractors to make things better, safer, faster. What you ll need to bring: Electrical and instrumentation know-how, and happy to undertake regular maintenance work Hands-on experience and technical expertise with PLCs, SCADA, and HMIs. Why you ll love it here: You ll be joining a site that s proud of its history, and focused on a sustainable future, in a location known for its stunning scenary, and outdoor activities.
29/11/2025
Full time
Do you love problem-solving, tinkering with PLCs, and keeping complex systems running like clockwork? If you're nodding, then please keep reading. We're on the hunt for a Controls & Automation Engineer who s not just good with wires and code but thrives in the challenges of working within an industrial environment. What you ll be doing: Keeping site control systems running smoothly and fixing them fast when they re not. Provide control systems expertise, undertake troubleshooting activities as required. Lead site control system maintenance projects and support site electrical engineering activities Maintain and update drawings for site control systems Ensure personnel working on site for control system works, comply with the site HSEQ standards. Collaborating with ops, suppliers, and contractors to make things better, safer, faster. What you ll need to bring: Electrical and instrumentation know-how, and happy to undertake regular maintenance work Hands-on experience and technical expertise with PLCs, SCADA, and HMIs. Why you ll love it here: You ll be joining a site that s proud of its history, and focused on a sustainable future, in a location known for its stunning scenary, and outdoor activities.
CONTROLS & AUTOMATION ENGINEER Location: Fort William (Scotland) Salary: £(phone number removed)/annum (negotiable) + 10 % bonus (based on annual salary) + excellent relocation package Job type: Permanent Role Objective Maintain site control systems to minimise breakdown times and ensure efficient recovery after system failures. Provide control systems expertise to lead complex control system process troubleshooting. Lead site control system maintenance projects and support site electrical engineering capital projects. Identify, implement and develop control system and equipment improvements to support smelter operations Supervise, mentor and coach technicians and engineers. Duties & Responsibilities Manage their own work and activities, in line with site HSEQ standards. Development, planning and execution of projects across the smelter and hydro-scheme which operates on a continuous basis 24/7. Project manage multiple projects concurrently in addition to providing engineering support to the site. Maintaining and updating all drawings associated with site control systems and projects. Monitors progress and performance against agreed objectives. Manage stakeholder relationships with both internal clients, and external suppliers and contractors. Ensure project specific management of change is carried out and recorded accordingly, against change register. Ensure compliance of all relevant legislation in relation to site control equipment. Provide Technical and Engineering support to Engineering and Operations functions. Ensure that all employees directly under their charge are aware of their responsibilities regarding HSEQ matters and their obligations for safe working. Discuss working methods with the HSEQ Department and determine adequate safe systems of work. Ensure that any contract or site personnel working on site for control system works, do so in a manner that complies with site HSEQ standards. Ensure continuity of operations by assisting with breakdowns. Assist with the development of apprentices with regards to controls and automation skills. Person Specification & Experience Electrical and instrumentation knowledge. PLC, HMI and SCADA experience. PLC programming skills. HND or above in an engineering discipline If you think that you have appropriate skills and experience to perform well at above role, please do not hesitate to apply!
28/11/2025
Full time
CONTROLS & AUTOMATION ENGINEER Location: Fort William (Scotland) Salary: £(phone number removed)/annum (negotiable) + 10 % bonus (based on annual salary) + excellent relocation package Job type: Permanent Role Objective Maintain site control systems to minimise breakdown times and ensure efficient recovery after system failures. Provide control systems expertise to lead complex control system process troubleshooting. Lead site control system maintenance projects and support site electrical engineering capital projects. Identify, implement and develop control system and equipment improvements to support smelter operations Supervise, mentor and coach technicians and engineers. Duties & Responsibilities Manage their own work and activities, in line with site HSEQ standards. Development, planning and execution of projects across the smelter and hydro-scheme which operates on a continuous basis 24/7. Project manage multiple projects concurrently in addition to providing engineering support to the site. Maintaining and updating all drawings associated with site control systems and projects. Monitors progress and performance against agreed objectives. Manage stakeholder relationships with both internal clients, and external suppliers and contractors. Ensure project specific management of change is carried out and recorded accordingly, against change register. Ensure compliance of all relevant legislation in relation to site control equipment. Provide Technical and Engineering support to Engineering and Operations functions. Ensure that all employees directly under their charge are aware of their responsibilities regarding HSEQ matters and their obligations for safe working. Discuss working methods with the HSEQ Department and determine adequate safe systems of work. Ensure that any contract or site personnel working on site for control system works, do so in a manner that complies with site HSEQ standards. Ensure continuity of operations by assisting with breakdowns. Assist with the development of apprentices with regards to controls and automation skills. Person Specification & Experience Electrical and instrumentation knowledge. PLC, HMI and SCADA experience. PLC programming skills. HND or above in an engineering discipline If you think that you have appropriate skills and experience to perform well at above role, please do not hesitate to apply!
Controls and Automation Engineer Our client has grown to be Scotland s largest and greenest metal production plants and is looking for an experienced, professional Automation Engineer, Electrical Controls Engineer to work within their manufacturing facility in the Scottish Highlands area. The key to this role is ability to work within a fast-moving production and manufacturing company within an integrated aluminium manufacturing and renewable hydropower plant maintaining and fault finding on a range of electrical products but with specific responsibility for controls, PLC s, HMI, SCADA systems. The Role This role requires applicants who can interrogate and program PLC s, identifying problems and producing workable solutions to the controls. Ideally with a strongly established knowledge of programming. Managing the projects of all electrical equipment within our client s facility. Knowledge of 3 phase electrical, drives, controls, sensors, controls, servo s, invertors, and production equipment on site. The role requires applicants who has pro-active Project management, maintenance, reactive maintenance, and repair experience but must have programming and fault-finding experience of PLCs. Applicants will Development, planning and execution of projects. Project manage multiple projects concurrently in addition to providing engineering support to the site. Maintaining and updating all drawings associated with site control systems and projects, whilst monitors progress and performance against agreed objectives. The Person Applicants will preferably have present or previous Automation Engineering, PLC Programming, HMI, SCADA, electrical maintenance, and repair experience. Applicant with fault finding experience, PLC programming, PLC interrogation, PLC fault finding experience would be ideal. Applicants must hold a minimum of HND in engineering and have people management experience. Applicants should be suitably qualified; the role requires applicants to work Monday-Friday days with call out. If you feel you have the natural confidence and enthusiasm demonstrates your ability to undertake this challenging and rewarding new career, please contact us as soon as possible. As a blue-chip company, you will receive a competitive salary £50-60k, Bonus £5k, Relocation allowance of £8,000, First 3 months Rent Paid, Sign-Up Bonus, On Call allowance of £3.1k, pension scheme, Health & Dental, Life Insurance Scheme, and 25 days holiday. Contact us to discuss this opportunity and your application to this exciting role, as On-Line interviews will take place over the next few weeks. SMS Scotland Phone: (phone number removed)
28/11/2025
Full time
Controls and Automation Engineer Our client has grown to be Scotland s largest and greenest metal production plants and is looking for an experienced, professional Automation Engineer, Electrical Controls Engineer to work within their manufacturing facility in the Scottish Highlands area. The key to this role is ability to work within a fast-moving production and manufacturing company within an integrated aluminium manufacturing and renewable hydropower plant maintaining and fault finding on a range of electrical products but with specific responsibility for controls, PLC s, HMI, SCADA systems. The Role This role requires applicants who can interrogate and program PLC s, identifying problems and producing workable solutions to the controls. Ideally with a strongly established knowledge of programming. Managing the projects of all electrical equipment within our client s facility. Knowledge of 3 phase electrical, drives, controls, sensors, controls, servo s, invertors, and production equipment on site. The role requires applicants who has pro-active Project management, maintenance, reactive maintenance, and repair experience but must have programming and fault-finding experience of PLCs. Applicants will Development, planning and execution of projects. Project manage multiple projects concurrently in addition to providing engineering support to the site. Maintaining and updating all drawings associated with site control systems and projects, whilst monitors progress and performance against agreed objectives. The Person Applicants will preferably have present or previous Automation Engineering, PLC Programming, HMI, SCADA, electrical maintenance, and repair experience. Applicant with fault finding experience, PLC programming, PLC interrogation, PLC fault finding experience would be ideal. Applicants must hold a minimum of HND in engineering and have people management experience. Applicants should be suitably qualified; the role requires applicants to work Monday-Friday days with call out. If you feel you have the natural confidence and enthusiasm demonstrates your ability to undertake this challenging and rewarding new career, please contact us as soon as possible. As a blue-chip company, you will receive a competitive salary £50-60k, Bonus £5k, Relocation allowance of £8,000, First 3 months Rent Paid, Sign-Up Bonus, On Call allowance of £3.1k, pension scheme, Health & Dental, Life Insurance Scheme, and 25 days holiday. Contact us to discuss this opportunity and your application to this exciting role, as On-Line interviews will take place over the next few weeks. SMS Scotland Phone: (phone number removed)
What Are We Looking For? RSE Controls (Saftronics) is looking to recruit a Senior Software Design Engineer that will be responsible for the development, commissioning and support of automation and control systems. RSE Controls are a specialist business in the MCC and power control sector, and you ll be working alongside an established team to deliver control system solutions to the water industry. Some of Your Key Duties Include: The design, specification, programming, simulation and testing of automation and control systems. Developing, troubleshooting, and validating these systems in a compliant manner. Generate documentation and SOPs associated with each of the Automation systems as required. Assist tendering and project teams in the development of manhour budgets and programs for software development and delivery. Trouble shooting of PLC software code for startup and commissioning activities. Manage the production of FDS documentation to support software production and the end user. Design activities will involve: Interfacing with instrumentation and sensors specific for machine and process control. Data capture and validation. Designing and implementing PLC networks. Electrical systems design, detailed hardware component specifications and bill of materials. Programming a range of PLCs, primarily SIEMENS, Mitsubishi, and Allen Bradley. What Do You Need? Degree qualified in Engineering or equivalent, particular emphasis on electrical, mechanical, electronic, automation and/or chemical discipline. A proven background in the design and commissioning of control and electrical systems associated with process automation. Experience with Programmable Logic Controllers (PLC s) and Vision Systems in the process control environment. Experience in one or more of the following: Allen Bradley, SIEMENS, Mitsubishi. HMI and SCADA programming and configuration of the following software packages Wonderware, InTouch, RS View, SIEMENS, Labview, GE Cimplicity. FAT and SATA experience with PLC and Electrical Control Systems. A working knowledge of process systems, P&ID control and loop tuning. Must be flexible and willing to travel. Saftronics Who Are We? Saftronics are specialists in power & process control, excelling in the specification and supply of motor control centres, control panels, power distribution and process control systems across a wide range of industries. Saftronics is part of the RSE group of companies, operating within the Power Distribution & Controls business stream. RSE is the leading contractor of choice in the design, build & maintenance of water treatment & water recycling equipment. Delivering products and services to clients across the UK, RSE s unique offering to the market focuses on innovation, efficiency, and excellence. RSE Who Are We? Established in 1982, RSE has grown into one of the most prominent MEICA engineering businesses in the UK water industry. We have created a complete in-house and full-service capability from project inception through to design, fabrication, and delivery by means of installation and commissioning. We additionally have one of the largest servicing and maintenance teams in the market, to ensure we re on hand for all our clients needs. Our service offering presents industry-leading innovative solutions and our dedicated staff play a key role in delivering our sustainability and wider business goals. With over 1500 staff across our group of companies, our strategic ambition will see the business continue to grow as we expand our operations and diversify our products. One of RSE s key focuses is driving servant leadership and giving our people the opportunity and responsibility to take an entrepreneurial approach in their career development. What We Offer To build successful teams and drive the level of quality that we are renowned for, we know we need the best people in the industry. Not only do we require the relevant skillsets, but we also need people with the right attitude and mentality to thrive and grow in such an innovative industry. You ll be given every opportunity to set the path of your career through our Business Streams and work in an environment that will require you to rise to the challenge of working for a market leader. Industry-leading salary dependant on experience. A flexible career development path, with no restrictions on where your career can go. Company Car Allowance A holiday allowance of 25 days plus Bank Holidays. EV/Hybrid Car Lease Scheme Discount Retail Platform Company Pension Scheme. Cycle to work scheme. If you re interested in a career with a company that will harness your skills and provides you with the support to create your future, then please apply.
25/11/2025
Full time
What Are We Looking For? RSE Controls (Saftronics) is looking to recruit a Senior Software Design Engineer that will be responsible for the development, commissioning and support of automation and control systems. RSE Controls are a specialist business in the MCC and power control sector, and you ll be working alongside an established team to deliver control system solutions to the water industry. Some of Your Key Duties Include: The design, specification, programming, simulation and testing of automation and control systems. Developing, troubleshooting, and validating these systems in a compliant manner. Generate documentation and SOPs associated with each of the Automation systems as required. Assist tendering and project teams in the development of manhour budgets and programs for software development and delivery. Trouble shooting of PLC software code for startup and commissioning activities. Manage the production of FDS documentation to support software production and the end user. Design activities will involve: Interfacing with instrumentation and sensors specific for machine and process control. Data capture and validation. Designing and implementing PLC networks. Electrical systems design, detailed hardware component specifications and bill of materials. Programming a range of PLCs, primarily SIEMENS, Mitsubishi, and Allen Bradley. What Do You Need? Degree qualified in Engineering or equivalent, particular emphasis on electrical, mechanical, electronic, automation and/or chemical discipline. A proven background in the design and commissioning of control and electrical systems associated with process automation. Experience with Programmable Logic Controllers (PLC s) and Vision Systems in the process control environment. Experience in one or more of the following: Allen Bradley, SIEMENS, Mitsubishi. HMI and SCADA programming and configuration of the following software packages Wonderware, InTouch, RS View, SIEMENS, Labview, GE Cimplicity. FAT and SATA experience with PLC and Electrical Control Systems. A working knowledge of process systems, P&ID control and loop tuning. Must be flexible and willing to travel. Saftronics Who Are We? Saftronics are specialists in power & process control, excelling in the specification and supply of motor control centres, control panels, power distribution and process control systems across a wide range of industries. Saftronics is part of the RSE group of companies, operating within the Power Distribution & Controls business stream. RSE is the leading contractor of choice in the design, build & maintenance of water treatment & water recycling equipment. Delivering products and services to clients across the UK, RSE s unique offering to the market focuses on innovation, efficiency, and excellence. RSE Who Are We? Established in 1982, RSE has grown into one of the most prominent MEICA engineering businesses in the UK water industry. We have created a complete in-house and full-service capability from project inception through to design, fabrication, and delivery by means of installation and commissioning. We additionally have one of the largest servicing and maintenance teams in the market, to ensure we re on hand for all our clients needs. Our service offering presents industry-leading innovative solutions and our dedicated staff play a key role in delivering our sustainability and wider business goals. With over 1500 staff across our group of companies, our strategic ambition will see the business continue to grow as we expand our operations and diversify our products. One of RSE s key focuses is driving servant leadership and giving our people the opportunity and responsibility to take an entrepreneurial approach in their career development. What We Offer To build successful teams and drive the level of quality that we are renowned for, we know we need the best people in the industry. Not only do we require the relevant skillsets, but we also need people with the right attitude and mentality to thrive and grow in such an innovative industry. You ll be given every opportunity to set the path of your career through our Business Streams and work in an environment that will require you to rise to the challenge of working for a market leader. Industry-leading salary dependant on experience. A flexible career development path, with no restrictions on where your career can go. Company Car Allowance A holiday allowance of 25 days plus Bank Holidays. EV/Hybrid Car Lease Scheme Discount Retail Platform Company Pension Scheme. Cycle to work scheme. If you re interested in a career with a company that will harness your skills and provides you with the support to create your future, then please apply.
One of the UK's most established multidisciplinary design and build contractors with a rich history spanning over a century are in search of experienced Lead Controls Engineers to join a dynamic team. Specialising in the Water, Power & Energy, Pharmaceutical and Food and Beverage industries, they are at the cutting edge of value-added engineering. With over 100 years of industry experience, they have honed their expertise to support blue chip clients, positioning themselves at the forefront of value-added engineering. Lead Control Systems Engineer £50-55k + Car Allowances + Benefits / Hybrid Working A key role delivering automation projects across the entire project life cycle Join a large team of controls & automation engineers across multiple UK locations North West based role. Ref: 23684 Lead Controls Engineer - The Role: You will take charge of complex control system projects, either independently or leading a team of 3-5 engineers You will be involved in all stages of the project, from creating design documentation to developing control software, testing, commissioning and handover If leading a team, you will manage the workload and progression of your team members, working closely with the Project Manager to meet contractual project milestones You will review design documents and test the software developed by your team members Lead Controls Engineer - The Person: Strong knowledge of safe working practices PLC and HMI software development experience using at least two manufacturers devices from Rockwell Automation, Siemens, Mitsubishi or Schneider Experience with multiple communication protocols and working with SCADA systems and VSDs As a Lead Controls Engineer, you will enjoy a rewarding role in a leading engineering business. Working for a company who pride themselves on their culture that promotes personal development and ensures employee safety. If you have a proven track record in delivering control and automation projects to major UK clients in the Water, Industrial Automation or Process sectors, this is the perfect opportunity for you. For further information call Sharon Hill AE1
21/11/2025
Full time
One of the UK's most established multidisciplinary design and build contractors with a rich history spanning over a century are in search of experienced Lead Controls Engineers to join a dynamic team. Specialising in the Water, Power & Energy, Pharmaceutical and Food and Beverage industries, they are at the cutting edge of value-added engineering. With over 100 years of industry experience, they have honed their expertise to support blue chip clients, positioning themselves at the forefront of value-added engineering. Lead Control Systems Engineer £50-55k + Car Allowances + Benefits / Hybrid Working A key role delivering automation projects across the entire project life cycle Join a large team of controls & automation engineers across multiple UK locations North West based role. Ref: 23684 Lead Controls Engineer - The Role: You will take charge of complex control system projects, either independently or leading a team of 3-5 engineers You will be involved in all stages of the project, from creating design documentation to developing control software, testing, commissioning and handover If leading a team, you will manage the workload and progression of your team members, working closely with the Project Manager to meet contractual project milestones You will review design documents and test the software developed by your team members Lead Controls Engineer - The Person: Strong knowledge of safe working practices PLC and HMI software development experience using at least two manufacturers devices from Rockwell Automation, Siemens, Mitsubishi or Schneider Experience with multiple communication protocols and working with SCADA systems and VSDs As a Lead Controls Engineer, you will enjoy a rewarding role in a leading engineering business. Working for a company who pride themselves on their culture that promotes personal development and ensures employee safety. If you have a proven track record in delivering control and automation projects to major UK clients in the Water, Industrial Automation or Process sectors, this is the perfect opportunity for you. For further information call Sharon Hill AE1
Are you a Control Systems Engineer ready to take on exciting, high-profile projects in the North West? We re working with a fast-growing, independent automation specialist delivering advanced control solutions to leading names across food and beverage, pharma, utilities, and high-security sectors such as defence, aerospace, and nuclear. Known for embracing complex challenges and driving innovation, they are expanding their team to meet a strong pipeline of upcoming projects. Control Systems Engineer £40,000 £65,000 DOE + Pension + Healthcare + Life Assurance Excellent training & development opportunities. North West. Ref: 23822 Controls Engineer - The Role: Design, configure and develop PLC systems for a range of industrial automation projects Produce functional design specifications and test documentation (FDS, FAT/SAT) Manage full project life cycles from initial design to on-site commissioning Liaise with clients and subcontractors to ensure seamless delivery. Travel across the UK (c20%) to support commissioning and client interaction. Controls Engineer - The Person: Solid experience in real-time control systems design and commissioning. Proficient in PLC programming (Rockwell, Siemens, Mitsubishi, Schneider). Previous experience within a systems integrator environment Comfortable managing documentation and project processes. Degree-qualified (or equivalent experience) and a full UK driving licence. We are keen to see Control Systems Engineers with experience of the following packages: PLC Software Rockwell, Siemens, Mitsubishi, Schneider HMI/SCADA Software Rockwell FTView ME & SE, AVEVA InTouch & System Platform, Schneider ClearSCADA GEiFIX, Siemens WinCC This is an excellent opportunity to join a business with a heritage of over 100 years and a current order book approaching £1Bn. They offer a clear career path, on-going professional training including Chartership and a collaborative working environment. Preferably you will be degree qualified with background in a similar role. Strong communication skills are needed along with a full UK valid driving licence. For further information call Sharon Hill Available
21/11/2025
Full time
Are you a Control Systems Engineer ready to take on exciting, high-profile projects in the North West? We re working with a fast-growing, independent automation specialist delivering advanced control solutions to leading names across food and beverage, pharma, utilities, and high-security sectors such as defence, aerospace, and nuclear. Known for embracing complex challenges and driving innovation, they are expanding their team to meet a strong pipeline of upcoming projects. Control Systems Engineer £40,000 £65,000 DOE + Pension + Healthcare + Life Assurance Excellent training & development opportunities. North West. Ref: 23822 Controls Engineer - The Role: Design, configure and develop PLC systems for a range of industrial automation projects Produce functional design specifications and test documentation (FDS, FAT/SAT) Manage full project life cycles from initial design to on-site commissioning Liaise with clients and subcontractors to ensure seamless delivery. Travel across the UK (c20%) to support commissioning and client interaction. Controls Engineer - The Person: Solid experience in real-time control systems design and commissioning. Proficient in PLC programming (Rockwell, Siemens, Mitsubishi, Schneider). Previous experience within a systems integrator environment Comfortable managing documentation and project processes. Degree-qualified (or equivalent experience) and a full UK driving licence. We are keen to see Control Systems Engineers with experience of the following packages: PLC Software Rockwell, Siemens, Mitsubishi, Schneider HMI/SCADA Software Rockwell FTView ME & SE, AVEVA InTouch & System Platform, Schneider ClearSCADA GEiFIX, Siemens WinCC This is an excellent opportunity to join a business with a heritage of over 100 years and a current order book approaching £1Bn. They offer a clear career path, on-going professional training including Chartership and a collaborative working environment. Preferably you will be degree qualified with background in a similar role. Strong communication skills are needed along with a full UK valid driving licence. For further information call Sharon Hill Available
One of the UKs most established multidisciplinary design and build contractors with a rich history spanning over a century are in search of experienced Lead Control Systems Engineers to join a dynamic team. Specialising in the Water, Power, Energy, and Food and Beverage industries, they are at the cutting edge of value-added engineering. With over 100 years of industry experience, they have honed their expertise in supporting blue chip clients across various sectors, positioning themselves at the forefront of value-added engineering. Lead Controls Engineer £50-55k + Car Allowances + Benefits A key role delivering automation projects across the entire project lifecycle Join a large team of controls and automation engineers across multiple UK locations Derbyshire based role. Ref: 23694 Lead Controls Engineer - The Role: You will take charge of complex control system projects, either independently or leading a team of 3-5 engineers You will be involved in all stages of the project, from creating design documentation to developing control software, testing, commissioning and handover If leading a team, you will manage the workload and progress of your team members, working closely with the Project Manager to meet contractual project milestones You will review design documents and test the software developed by your team members Lead Controls Engineer - The Person: Strong knowledge of safe working practices PLC and HMI software development experience using at least two manufacturers devices from Rockwell Automation, Siemens, Mitsubishi or Schneider. Experience with multiple communication protocols and working with SCADA systems and VSDs. If you have a proven track record in delivering control and automation projects to major UK clients in the Water, Industrial Automation or Process sectors, this is the perfect opportunity for you. Join the team and take the lead in delivering automation projects to clients. If you have held or are interested in the following roles this position could be a perfect fit for you: Control Systems Engineer, Automation Engineer, PLC Programmer, SCADA Engineer, or Senior Controls Engineer. For further information call Sharon Hill
21/11/2025
Full time
One of the UKs most established multidisciplinary design and build contractors with a rich history spanning over a century are in search of experienced Lead Control Systems Engineers to join a dynamic team. Specialising in the Water, Power, Energy, and Food and Beverage industries, they are at the cutting edge of value-added engineering. With over 100 years of industry experience, they have honed their expertise in supporting blue chip clients across various sectors, positioning themselves at the forefront of value-added engineering. Lead Controls Engineer £50-55k + Car Allowances + Benefits A key role delivering automation projects across the entire project lifecycle Join a large team of controls and automation engineers across multiple UK locations Derbyshire based role. Ref: 23694 Lead Controls Engineer - The Role: You will take charge of complex control system projects, either independently or leading a team of 3-5 engineers You will be involved in all stages of the project, from creating design documentation to developing control software, testing, commissioning and handover If leading a team, you will manage the workload and progress of your team members, working closely with the Project Manager to meet contractual project milestones You will review design documents and test the software developed by your team members Lead Controls Engineer - The Person: Strong knowledge of safe working practices PLC and HMI software development experience using at least two manufacturers devices from Rockwell Automation, Siemens, Mitsubishi or Schneider. Experience with multiple communication protocols and working with SCADA systems and VSDs. If you have a proven track record in delivering control and automation projects to major UK clients in the Water, Industrial Automation or Process sectors, this is the perfect opportunity for you. Join the team and take the lead in delivering automation projects to clients. If you have held or are interested in the following roles this position could be a perfect fit for you: Control Systems Engineer, Automation Engineer, PLC Programmer, SCADA Engineer, or Senior Controls Engineer. For further information call Sharon Hill
A great opportunity to work for a company that designs bespoke machinery for medical specialists worldwide. Renowned for its precision engineering, custom system design and strong commitment to sustainability, this organisation offers a dynamic environment where innovation and craftsmanship go hand in hand. Control Systems Engineer £45000 - £55000 + Enhanced Earning While Commissioning, Pension, Early Finish Friday 1pm. 37 hour week. West Yorkshire. Ref: 24996 Control Systems Engineer - The Role: Qualified in Electrical or Electronic Engineering (HNC, HND, Degree or equivalent experience). Skilled in PLC, SCADA and HMI programming, with experience in control system design and integration. Siemens Servo & Inverter Drives and Unify panel experience highly advantageous Strong practical understanding of electrical schematics, panel layouts and industrial automation. Hands-on, detail-oriented and capable of working independently with minimal supervision. Confident communicator who can liaise effectively with customers, suppliers and colleagues. Adaptable and eager to learn new systems, tools and technologies. Committed to upholding safety, quality and environmental standards. Able to travel for on-site installations, testing and customer support when required. A proactive problem-solver with a focus on delivering high-quality engineering solutions. Control Systems Engineer - The Person: Install, commission and test electrical components, systems and electronic controls for new equipment builds and customer installations. Interpret electrical design blueprints to plan and implement circuit layouts, panel boards and system configurations. Develop, install and maintain control software, including PLC, Safety PLC, SCADA and HMI systems. Perform detailed quality and accuracy checks on electrical assemblies both in-house and on customer sites. Lead or assist with Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT), ensuring smooth commissioning and reliable performance. Serve as a key point of contact for clients on electrical and process-related matters, providing technical support and troubleshooting assistance. Located in West Yorkshire, this role would be commutable from Huddersfield, Leeds or Bradford.
21/11/2025
Full time
A great opportunity to work for a company that designs bespoke machinery for medical specialists worldwide. Renowned for its precision engineering, custom system design and strong commitment to sustainability, this organisation offers a dynamic environment where innovation and craftsmanship go hand in hand. Control Systems Engineer £45000 - £55000 + Enhanced Earning While Commissioning, Pension, Early Finish Friday 1pm. 37 hour week. West Yorkshire. Ref: 24996 Control Systems Engineer - The Role: Qualified in Electrical or Electronic Engineering (HNC, HND, Degree or equivalent experience). Skilled in PLC, SCADA and HMI programming, with experience in control system design and integration. Siemens Servo & Inverter Drives and Unify panel experience highly advantageous Strong practical understanding of electrical schematics, panel layouts and industrial automation. Hands-on, detail-oriented and capable of working independently with minimal supervision. Confident communicator who can liaise effectively with customers, suppliers and colleagues. Adaptable and eager to learn new systems, tools and technologies. Committed to upholding safety, quality and environmental standards. Able to travel for on-site installations, testing and customer support when required. A proactive problem-solver with a focus on delivering high-quality engineering solutions. Control Systems Engineer - The Person: Install, commission and test electrical components, systems and electronic controls for new equipment builds and customer installations. Interpret electrical design blueprints to plan and implement circuit layouts, panel boards and system configurations. Develop, install and maintain control software, including PLC, Safety PLC, SCADA and HMI systems. Perform detailed quality and accuracy checks on electrical assemblies both in-house and on customer sites. Lead or assist with Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT), ensuring smooth commissioning and reliable performance. Serve as a key point of contact for clients on electrical and process-related matters, providing technical support and troubleshooting assistance. Located in West Yorkshire, this role would be commutable from Huddersfield, Leeds or Bradford.
Benefits Package: 40,000 - 60,000 A realistic chance of progression and development from this role. Very competitive Pension Opportunity to work with a variety of equipment with a variety of engineering companies. Life Assurance This company have a dynamic work environment, they believe in team work and trust, they would like creative minds and are always looking for innovation and new ideas. They are currently experiencing exciting growth plans with work orders and projects growing at a rapid rate, naturally this has led to the requirement for an additional Automation Engineer to join their multi-disciplined team. The business work with in a variety of sectors across engineering functions and are currently going through A huge growth period which would make it an excellent time to be a part of this company. Role & Responsibilities: Customer contact, including clarification of requirements Project management/execution Functional Description (FDS) writing Design/development of software for PLC/PC-based control systems Consultancy Planning and participation in testing Participation in commissioning and service of plants Participation in the development of standards/procedures Knowledge, Skills & Experience: Experience working as a Controls / Automation Engineer / Process Engineer / PLC Programmer previously with a manufacturing environment. Engineering or other relevant technical background Experience with dairy processes or similar Experience with ISA S88 and/or S95 standards 3 years or more of PLC/SCADA programming experience in one or more of the following systems such as Siemens, Allen Bradley, ABB 800xA, Schneider, Modicon, Mitsubishi, Wonderware and WinCC is desirable. If you are interested in this position please click 'apply'. Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors. Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
19/11/2025
Full time
Benefits Package: 40,000 - 60,000 A realistic chance of progression and development from this role. Very competitive Pension Opportunity to work with a variety of equipment with a variety of engineering companies. Life Assurance This company have a dynamic work environment, they believe in team work and trust, they would like creative minds and are always looking for innovation and new ideas. They are currently experiencing exciting growth plans with work orders and projects growing at a rapid rate, naturally this has led to the requirement for an additional Automation Engineer to join their multi-disciplined team. The business work with in a variety of sectors across engineering functions and are currently going through A huge growth period which would make it an excellent time to be a part of this company. Role & Responsibilities: Customer contact, including clarification of requirements Project management/execution Functional Description (FDS) writing Design/development of software for PLC/PC-based control systems Consultancy Planning and participation in testing Participation in commissioning and service of plants Participation in the development of standards/procedures Knowledge, Skills & Experience: Experience working as a Controls / Automation Engineer / Process Engineer / PLC Programmer previously with a manufacturing environment. Engineering or other relevant technical background Experience with dairy processes or similar Experience with ISA S88 and/or S95 standards 3 years or more of PLC/SCADA programming experience in one or more of the following systems such as Siemens, Allen Bradley, ABB 800xA, Schneider, Modicon, Mitsubishi, Wonderware and WinCC is desirable. If you are interested in this position please click 'apply'. Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors. Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
