53 jobs found

What we do :At Sonoco Chesterfield we manufacture composite cans used as packaging mainly for food and powdered beverages.You have probably seen some of our products on the shelves in the supermarket: Pringles, the nation's favourite Bisto, Nestlé Coffee Mate, SlimFast powdered beverages, Heinz Baby Food, etc We are aiming to be one of the first fully paperboard cylindrical packing supplier, where our packaging is durable and 100% recyclablePurpose of Job:Within the operations department and reporting directly to the Engineering Manager, your role is to improve the efficiency and reliability of our plant manufacturing processes by application automation.Your day to day job will consist in:Supporting the production and engineering team through line breakdowns, supporting fault finding of the root cause and designing the issue out in the shortest period possible.You'll be supported by the shift engineer team; the process improvement engineers as well as our operators.Running Automation projects to plan for continued upgrade of equipment and control systems, ensuring none of our equipment becomes obsolete and out of date.You will also be involved in projects and day to day activities in our sister site at Bradford.Additional support required for: 5S, SMED, Centre lining, Process Control Automation, product defect identification systems, component lifespan identification.Machines installation & qualifications on site: Factory Acceptance Test, Commissioning, Team Training.New products introduction : trials of new materials and new products launch support at manufacturing level.Role within the company and stakeholder interactions:The candidate will report to the site Engineering Manager.The candidate will have to interact with multiple stakeholders on a day-to-day basis: Manufacturing, Engineering, Warehouse, Supply Chain , sister plants (based in Europe), SuppliersThe Automation Systems Engineer will be expected to be a subject matter expert and be able to guide/mentor engineers within the business.Key Activitiesprovide technical support to all areas daily across electrical, mechanical and automation disciplines.Configuration and programming of controllers and visualizations systems using Siemens (Simatic Manager and TIA Portal and WinCC flexible software).Project planning and programming of drive technology and servo drives - with emphasis on SEW Drive as well as Allen Bradley systems.Development, conception, design and creation of hardware / circuit diagrams.Automation troubleshooting following a recognisable troubleshooting process.Experience with bus systems and bus technology such as "Profinet" and "Profibus" with knowledge of systems such as ASI bus and CAN bus.Project Management and Project Coordination of site automation projects.Utilise AutoCad/Cad systems to maintain documentation updates, producing 2D CAD drawings of control panels, P&IDs and electrical wiring diagrams.Provide onsite services to assist in start-up or troubleshooting.Support and lead automation activities at both the Chesterfield and Bradford Production Sites.Develop HMI's for operator use.Coordinating with cross-functional team(s) to resolve automation issues.Write programs for new designed automatic and semi-automatic machines and conveyor systems for Siemens and Allen Bradley hardware.Debug and test new or modified PLC and robotic programs on the production floor.Conduct comprehensive machine and system testing.Ensure the department operates with due regard to current legislation, company and statutory requirementsEnsure the safe and efficient operation of equipment throughout the siteInstallation of production and plant equipment, commissioning, breakdown analysis and repairIdentify areas in which engineering improvements can be made to increase safety, quality, efficiency, or reduce wasteAssist with the training of company apprentices and shift EngineersAssist with developing operational manuals for newly designed machines and conveyor systems.Assist in risk assessment of newly designed machines with emphasis on machine safety.Help refine and develop programming standards and methods.Coordinate with other engineers and programmers on large systems and machines.Maintain and enhance the software and robotics solutions for the two sites.Maintain and document the appropriate software changes and updates to support equipment modifications and continuing operation.Work with Manufacturing/Operations to identify and troubleshoot machine control failures.Specify instrumentation and control hardware for equipment upgrades and future equipment lines.Will keep in line with new technology and advise the site accordinglyRunning testing and diagnostics on IT systems to identify potential problem.Identifying and resolving malfunctions within the system.Developing and installing new hardware or software to update and improve the functionality of systemsLiaising with outside suppliers or developers to source the most effective hardware or software for the company's needsCreating schematics plans of the systemBuilding robust backups that can be accessed in the event of system failure.Training shift Engineers and Process Improvement Engineers to work within the systems and to resolve issues on their own.Liaising with operational staff to ensure that systems can Complete designed tasks toLead improvement activities/projects across site, covering all equipment and facilities.Key Measurables:% Unplanned Downtime on focus machinery% Implementation of project work% People trained to correct operating level on focus machinery% People trained on problem solving$ saved by continuous improvement projects implementedCANDIDATE'S EXPERIENCEQualifications and ExperienceRequired:HNC/Degree qualified Electrical EngineeringProven Knowledge and experience in Siemens S5, S7, Allen Bradley. (this includes all aspects of drives, inverters and programming)Proven capability in Problem Solving (8D, Green Belt Lean 6 Sigma, UPS, A3, )Experience in a FMCG environmentDesirable:Graduate Masters / Bachelor in a Technical / Manufacturing / Sciences subject2 year or more of experience in a process control / engineering roleElectrically Biased multiskilled Engineering backgroundLean Six Sigma Green Belt qualified or equivalentSkills and KnowledgesAbility to analyse complex sets of data quickly.Priorities activities based on daily workload and medium projects.Ability to train and coach people.Excellent communication: written, spoken, visual.Excellent computer skills: mainly Microsoft Excel, PowerPoint, and emailPersonal AttributesMust be curious.Must be willing to learn and develop personal knowledge.Bias for action / Enthusiastic with drive for continuous improvementMust be an excellent team player with good interpersonal skills able to communicate at all levels.Logical with a key eye for detailsExcellent customer focus required.Must be willing to travel, both UK and EuropeWorking EnvironmentThe position is based in Chesterfield plant but can require visits to our manufacturing plants in UK & Europe as well as visits to our Suppliers or Customers in the UK. are an equal opportunity employer, and we strictly prohibit and do not tolerate discrimination against employees, applicants or any other covered persons because of race, color, religion, national origin or ancestry, sex, pregnancy, sexual orientation, marital status, gender identity or expression, age, disability, genetic information, veteran status, or any legally protected characteristic.

About Crown Lift Trucks Ltd Crown is one of the world's largest material handling companies with a reputation for award winning product design, advanced engineering & technology, as well as superior after sales service. For 80 years, Crown's business philosophy has utilised vertically integrated processes to design, manufacture, and distribute forward-thinking, innovative solutions that improve customers' productivity and operating efficiency. Crown produces a broad range of forklifts, batteries and chargers as well as automation solutions and fleet management technologies, and warehouse solutions products and design services. When every minute matters, customers can count on Crown to keep their businesses moving. Job Description A forklift truck service engineer has a real responsibility, working on their own initiative to diagnose and solve problems. You are the one the customer relies upon to get his business up to speed. Good engineers are in high demand and this will only increase over the years to come. You're looking at a secure, long term career, in an industry and company that is here to stay. Responsibilities Learn how to install, repair and carry out planned maintenance of customer forklift trucks to Crown specifications. Undertake an appropriate engineering apprenticeship, completing set modules on time and attending college as necessary. Work shadow a colleague, and develop an understanding of workshop procedures through on job training. Attend manufacturers training and other training courses as appropriate. Learn Crown administrative procedures, and how to complete worksheets, timesheets etc. Assist in keeping customer trucks secure and clean whilst in the workshop. Ensure security and correct use and issue of all tools and spares issued. Understand and adhere to all Crown Company, legislative and Health and Safety procedures. Under close supervision, ensure all work undertaken meets industry and Crown work standards. Build and maintain good relationships with customers, colleagues and managers. Undertake other duties which Crown may from time to time reasonably request. Person Specification Essential Skills You must be willing to learn and have the ability to follow instructions. You must have a keen interest in engineering. Friendly and able to build relationships with colleagues and customers. A C grades or equivalent in Maths and English as a minimum. I.T. literate and familiar with Microsoft Word, Excel or equivalent software. Ability to work efficiently and accurately. Highly motivated. The ability to work as a team member and possess good interpersonal, communication and literacy skills. To work with efficiency, accuracy and to be able to meet deadlines. To be able to prioritise workload and work under own initiative. High level of flexibility and dependability. Aptitude for practical science or engineering skills. Desirable Skills No prerequisite experience required but a demonstrable interest in mechanical engineering through school or hobby interests. Vacancy Details Hours of Work: Monday to Friday - 8 hours At Crown, we know that our employees are the driving force behind our success in the material handling industry. We cultivate a culture of passionate people and inspired innovation. In fact, throughout Crown's history, more than 1,000 employees have reached a 25-year milestone, and we are proud to have travelled their career paths with them. From employee training and development to competitive compensation packages, we invest in our employees, knowing that people are always at the core of what moves us forward. In addition to financial remuneration and participation, we offer our employees various social benefits including but not limited to: Company pension plan. 25 days annual leave plus bank holidays. Support with tooling. Excellent discount scheme with access to the best perks from some of the UK's biggest brands. Tel Us Health.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Major UK programmes such as Apache, Chinook, C-17, P-8A and Wedgetail are supported and delivered by Boeing Defence UK (BDUK), a subsidiary of The Boeing Company. Employing more than 1,400 people, BDUK also provides engineering sustainment and support for aircraft in service with the UK armed forces, along with virtual and instructor led training. Leveraging our established defence business in the UK, and blending our local expertise with our 'One Boeing' global approach, BDUK is well positioned to support the UK with its current and future defence and security challenges. The P8 Training Services based at RAF Lossiemouth provides P8 synthetic training to our MOD customer through the utilisation of state of the art simulation and training systems. P8 Training Engineering supports the continuity of the training delivery through pro active maintenance and management of the training devices and infrastructure. Responsibilities Assists with repairs and tests, installs, configures, upgrades and assists in the modification of simulators and training components, devices, hardware and software Performs general inspections for pre operations, post operations and component handling of training devices, assemblies and components Conducts functional tests of training device systems and monitors device instrumentation and bench mounted indicators Troubleshooting systems, support equipment to isolate faults and repair faulty components Works under limited supervision Develop and enhance existing processes and procedures to drive continuous improvement within the P8 Device Maintenance Department. Additional Duties Perform extra duties to support the maintenance team as tasked by Shift lead or Engineering Manager. Basic Qualifications (Required skills/Experience) Excellent organization and computing skills. Good level of experience with electronic/electrical systems. Proficient with Microsoft office applications. Preferred Qualifications (Desired Skills/Experience) Experience on flight simulators and training equipment. Time served indentured apprenticeship (Simulator/Avionics/Electronics/Engineering) NVQ level 3 Electrical/Electronics/Avionics Knowledge of computer networking Experience with qualification test guide running and grading (QTG's). Knowledge of the Military Air Environment and associated governance. HNC or higher Electronics/Avionics/Aircraft Engineering Location & Hours This position will be based onsite at RAF Lossiemouth, full time and will operate on a shift pattern. Applications for this position will be accepted until Jul. 20, 2026 Export Control Requirements This is not an Export Control position. Relocation Relocation assistance is not a negotiable benefit for this position. Security Clearance This position requires the ability to obtain United Kingdom Security Check. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift Shift Worker (United Kingdom) Equal Opportunity Employer We are an equal opportunity employer. We do not accept unlawful discrimination in our recruitment or employment practices on any grounds including but not limited to; race, color, ethnicity, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military and veteran status, or other characteristics covered by applicable law. We have teams in more than 65 countries, and each person plays a role in helping us become one of the world's most innovative, diverse and inclusive companies. We are a Disability Confident Committed employer and welcome applications from candidates with disabilities. Applicants are encouraged to share with our recruitment team any accommodations required during the recruitment process. Accommodations may include but are not limited to: conducting interviews in accessible locations that accommodate mobility needs, encouraging candidates to bring and use any existing assistive technology such as screen readers and offering flexible interview formats such as virtual or phone interviews.

Summary: We have a unique opportunity to join a talented multi-disciplined team. We are looking for a self-motivated individual who has a passion for engineering and technology. You should have mechanical/electrical (preferred) experience along with onsite industry exposure and experience of leading a small team. Experience with pumps and understand the fundamentals of pumping. You will be competent with the use of IT due to collating data which will be shared with the wider team. The role will require frequent travel on a weekly basis throughout the UK. As you progress through the training there will be a requirement for international travel working on specialist projects all over the world. Candidates should have a level 3 qualification or apprenticeship in either mechanical or electrical engineering and have the aptitude to learn and develop in a fast paced, 'hands on' environment. Therefore, being able to be flexible, and adaptable to the business needs will be important in an ever-changing technical environment. The role has many elements, but the key focus will be installing our own specialist monitoring and testing equipment for various hydraulic systems including pump, fans, compressors, hydraulic networks and aeration networks. Whilst onsite, you will also be undertaking specialist measurement campaigns, deploying our core technology, cutting edge hardware (precision temperature, pressure, power measurement equipment) and our inhouse developed software technology into the water industry, as well as offering full application support as and when required to our partners and growing customer base. Duties and Responsibilities Flexibility with working away from home due to undertaking site work in the UK and overseas Installing specialist equipment on site, when not onsite maintenance and repair work carried out at our Stoke facility Be self motivated to work from home when not working on site Dependent on weekly workload flexibility around working hours is a must Lead a small team of 2 3 people Network with the wider technical teams to satisfy cross disciplinary projects Be respectful, polite, and professional with customers, colleagues, and the community Ability to work autonomously, and at times work unsupervised whilst always following all health and safety protocols set by both Riventa and our clients Customer interfacing Health and safety duties (RAMS etc) Carry out site surveys to scope new work and help with planning/RAMS/authorisation Focusing on achieving high standards of work across multiple bespoke projects, in a dynamic, energised, and professional environment Required Skills/Qualifications At least 3 years' experience of mechanical, process or similar engineering discipline Time served apprenticeship in electrical or mechanical engineering (or equivalent) Level 3 City & Guilds, NVQ, Diploma in electrical or mechanical engineering Proven experience in a role in which you contributed to the overall success with tangible output demonstrable IT skills, particularly Excel are preferred, but not essential as full training will be provided Mechanical experience (Pumps, Pipework, Valves) Electrical experience would be ideal but not essential as full training will be given Ability to learn new products and disciplines Driving Licence (Essential) Working for us means Holidays - 25 + 8 bank holidays, (buy/sell scheme, up to 5 days) Probationary period - 6 months. Pension - Can join immediately or auto enrolled after 3 months - Employee 5% and Employer 5% via salary sacrifice. Eligible to join Private Healthcare after successfully completing probation. Enrolled in Group Income Protection and Death in Service (4 x basic salary) upon commencement of employment. Notice - 1 week during probation, increasing to 1 month thereafter. Environmental & Social Impact Nijhuis Saur Industries UK & Ireland are committed to maintaining Environmental & Social Impact goals: To reach Net Zero emissions across our value chain by 2040. To continuously meet high standards of social and environmental performance, transparency, accountability, maintaining B Corp Certification. To be a socially responsible company creating a positive impact to all stakeholders including workers, communities, customers, and our planet. Equality and Diversity Statement Nijhuis Saur Industries UK & Ireland are an equal opportunity employer; we are committed to providing equal opportunities in all aspects of employment in line with the Equality Act 2010. Recruiter Please do not call or email us unless we have contacted you first. We believe that we can find our new colleagues ourselves, therefore agency support is not desired. Profiles and resumes sent unsolicited by agencies, even if you send them directly to a hiring manager, will be treated as direct applications from the candidate. Join our

Summary: We have a unique opportunity to join a talented multi-disciplined team. We are looking for a self-motivated individual who has a passion for engineering and technology. You should have mechanical/electrical (preferred) experience along with onsite industry exposure and experience of leading a small team. Experience with pumps and understand the fundamentals of pumping. You will be competent with the use of IT due to collating data which will be shared with the wider team. The role will require frequent travel on a weekly basis throughout the UK. As you progress through the training there will be a requirement for international travel working on specialist projects all over the world. Candidates should have a level 3 qualification or apprenticeship in either mechanical or electrical engineering and have the aptitude to learn and develop in a fast paced, 'hands on' environment. Therefore, being able to be flexible, and adaptable to the business needs will be important in an ever-changing technical environment. The role has many elements, but the key focus will be installing our own specialist monitoring and testing equipment for various hydraulic systems including pump, fans, compressors, hydraulic networks and aeration networks. Whilst onsite, you will also be undertaking specialist measurement campaigns, deploying our core technology, cutting-edge hardware (precision temperature, pressure, power measurement equipment) and our inhouse developed software technology into the water industry, as well as offering full application support as and when required to our partners and growing customer base. Duties and Responsibilities: Flexibility with working away from home due to undertaking site work in the UK and overseas Installing specialist equipment on site, when not onsite maintenance and repair work carried out at our Stoke facility Be self-motivated to work from home when not working on site Dependent on weekly workload flexibility around working hours is a must Lead a small team of 2-3 people Network with the wider technical teams to satisfy cross disciplinary projects Be respectful, polite, and professional with customers, colleagues, and the community Ability to work autonomously, and at times work unsupervised whilst always following all health and safety protocols set by both Riventa and our clients Customer interfacing Health and safety duties (RAMS etc) Carry out site surveys to scope new work and help with planning/RAMS/authorisation Focusing on achieving high standards of work across multiple bespoke projects, in a dynamic, energised, and professional environment Required Skills/Qualifications: At least 3 years' experience of mechanical, process or similar engineering discipline Time-served apprenticeship in electrical or mechanical engineering (or equivalent) Level 3 City & Guilds, NVQ, Diploma in electrical or mechanical engineering Proven experience in a role in which you contributed to the overall success with tangible output demonstrable IT skills, particularly Excel are preferred, but not essential as full training will be provided Mechanical experience (Pumps, Pipework, Valves) Electrical experience would be ideal but not essential as full training will be given Ability to learn new products and disciplines Driving Licence (Essential) Working for us means: Holidays - 25 + 8 bank holidays, (buy/sell scheme, up to 5 days) Probationary Period - 6 months. Pension - Can join immediately or auto enrolled after 3 months - Employee 5% and Employer 5% via salary sacrifice. Eligible to join Private Healthcare after successfully completing probation. Enrolled in Group Income Protection and Death in Service (4 x basic salary) upon commencement of employment. Notice - 1 week during probation, increasing to 1 month thereafter. Nijhuis Saur Industries UK & Ireland are committed to maintaining Environmental & Social Impact goals: To reach Net Zero emissions across our value chain by 2040. To continuously meet high standards of social and environmental performance, transparency, accountability, maintaining B-Corp Certification. To be a socially responsible company creating a positive impact to all stakeholders including workers, communities, customers, and our planet. Nijhuis Saur Industries UK & Ireland are an equal opportunity employer; we are committed to providing equal opportunities in all aspects of employment in line with the Equality Act 2010. Are you a recruiter? Please do not call or email us unless we have contacted you first. We believe that we can find our new colleagues ourselves, therefore agency support is not desired. Profiles and resumes sent unsolicited by agencies, even if you send them directly to a hiring manager, will be treated as direct applications from the candidate. Join our

Overview Hybrid with 2 days in our Stansted office. We are looking for an expert to lead the way in the innovation of the data analysis tools, automation and infrastructure within our Microsoft technology stack for our Award-Winning Accident Repair Network. Our mission is to develop the tools and technology that enable our teams to get our customers back to normal and we are often looking to cutting edge solutions to achieve this. The candidate will be reporting into our Platform Manager and working with our Systems Architect and Product Team to not only lead in the development of automation and Power Platform solutions for our business but also to support our bespoke award-winning IT system; as such this role is fundamental to our growth and success. Responsibilities As a Senior Azure Cloud Engineer, you will support and enable the Microsoft Technology Stack through IT Change, troubleshoot IT Problems, following ITIL v4 guidelines in this cutting edge and highly secure environment. You will support our technical environment, which includes Microsoft technologies, Meraki networking, SaaS solutions (including our own bespoke workshop management system) with much of the access managed by Single Sign-on (SSO). You will be passionate about technology and understand business systems and solutions. Work with the Systems Architect to design, implement, and maintain solutions within our Microsoft Technical Stack. Work with stakeholders to devise improvements to their teams' processes with Power Platforms and automation. Assist with IT Change and Problem Management following ITIL v4 guidelines, using advanced troubleshooting and problem solving skills and working closely with internal colleagues and external suppliers in resolving issues promptly. Support IT governance, ensuring security best practices and disaster recovery plans are followed and raise concerns, risks and cyber incidents to the IT leadership team. Maintain detailed documentation for system configuration, procedures and troubleshooting and work with the Helpdesk team to remove blockers to resolve incidents and process service requests. Provide guidance and support to the wider IT team on infrastructure design and build and provide information regarding system/device performance and error logs. Must be able to commute to the Stansted office as this role is hybrid 2 days a week in the office. Be innovative in exploring new technologies that can help develop skills and competencies in the business and for individuals. What do I need to know? Cloud Platform Engineering Be able to design, implement and maintain Azure infrastructure across compute, storage, networking, and identity services. Be able to manage and maintain secure, scalable, and highly available cloud platforms aligned to the Azure Well Architected Framework. Know how to implement and maintain Azure landing zones, subscriptions, and management groups. Security, Governance & Resilience Ensure platforms comply with security, compliance, and governance standards (e.g. RBAC, Key Vault, network security, logging). Apply best practices for cost control, monitoring, and operational resilience. Be able to support DR, backup, and business continuity designs across Azure workloads. Collaboration & Architecture Work closely with solution architect, product team, and security team to align cloud solutions with business needs. Provide input into Technical Design Authority, Change Steering Groups, architecture reviews, and project delivery. Produce and maintain clear technical documentation. Qualifications Strong hands on experience with Microsoft Azure, including: Azure Virtual Networks, VMs, Storage, Azure AD. PaaS services (App Services, Functions, Logic Apps, SQL, etc.). Monitoring and logging (Azure Monitor, Log Analytics). Scripting skills using PowerShell, Azure CLI, Bash, or Python.l Good understanding of networking, security, and identity in cloud environments. Minimum three years' experience in a similar role. Experience of working within the ITIL v4 or 5 frameworks. Relevant Apprenticeship or higher education. Any of the following qualifications would be advantageous: Microsoft Azure Administrator Associate AZ-104 Microsoft Azure Developer Associate AZ-204 Microsoft Azure Network Engineer Associate AZ-700 Microsoft Azure Solutions Architect Expert AZ-305 Solus, who are owned by Aviva, are one of the UK leaders in vehicle repairs, returning cars to the road in just 11 days on average and a 4.6/5 star customer rating. With an award winning apprenticeship programme and winners of other recognised industry awards Solus are proud to be shaping the future of vehicle repair. Why Join Solus? Competitive salary based on location, skills, experience, and qualifications. Bonus opportunity tied to your performance and the overall success of Solus. Company pension scheme with employer contributions. 33 days' holiday (including bank holidays), with the option to buy or sell up to 5 days. Save money with up to 40% discount on Aviva products and other retailer discounts. Share in Aviva's success through the Aviva Save As You Earn scheme. Supportive policies including parental and carer's leave. Wellbeing focus with tools like Group Income Protection and 24/7 GP access. At Solus, we value inclusivity and welcome all applicants. If you're excited but don't tick every box, we encourage you to apply-your unique skills might be just what we need. We guarantee an interview for disabled applicants meeting the minimum criteria-just email us after applying to let us know.

About Crown Lift Trucks Ltd Crown is one of the world's largest material handling companies with a reputation for award winning product design, advanced engineering & technology, as well as superior after sales service. For 80 years, Crown's business philosophy has utilised vertically integrated processes to design, manufacture, and distribute forward-thinking, innovative solutions that improve customers' productivity and operating efficiency. Crown produces a broad range of forklifts, batteries and chargers as well as automation solutions and fleet management technologies, and warehouse solutions products and design services. When every minute matters, customers can count on Crown to keep their businesses moving. Job Description A forklift truck service engineer has a real responsibility, working on their own initiative to diagnose and solve problems. You are the one the customer relies upon to get his business up to speed. Good engineers are in high demand and this will only increase over the years to come. You're looking at a secure, long term career, in an industry and company that is here to stay. Responsibilities Learn how to install, repair and carry out planned maintenance of customer forklift trucks to Crown specifications. Undertake an appropriate engineering apprenticeship, completing set modules on time and attending college as necessary. Work shadow a colleague, and develop an understanding of workshop procedures through on job training. Attend manufacturers training and other training courses as appropriate. Learn Crown administrative procedures, and how to complete worksheets, timesheets etc. Assist in keeping customer trucks secure and clean whilst in the workshop. Ensure security and correct use and issue of all tools and spares issued. Understand and adhere to all Crown Company, legislative and Health and Safety procedures. Under close supervision, ensure all work undertaken meets industry and Crown work standards. Build and maintain good relationships with customers, colleagues and managers. Undertake other duties which Crown may from time to time reasonably request. Person Specification Essential Skills You must be willing to learn and have the ability to follow instructions. You must have a keen interest in engineering. Friendly and able to build relationships with colleagues and customers. A C grades or equivalent in Maths and English as a minimum. I.T. literate and familiar with Microsoft Word, Excel or equivalent software. Ability to work efficiently and accurately. Highly motivated. The ability to work as a team member and possess good interpersonal, communication and literacy skills. To work with efficiency, accuracy and to be able to meet deadlines. To be able to prioritise workload and work under own initiative. High level of flexibility and dependability. Aptitude for practical science or engineering skills. Desirable Skills No prerequisite experience required but a demonstrable interest in mechanical engineering through school or hobby interests. Vacancy Details Hours of Work: Monday to Friday - 8 hours At Crown, we know that our employees are the driving force behind our success in the material handling industry. We cultivate a culture of passionate people and inspired innovation. In fact, throughout Crown's history, more than 1,000 employees have reached a 25-year milestone, and we are proud to have travelled their career paths with them. From employee training and development to competitive compensation packages, we invest in our employees, knowing that people are always at the core of what moves us forward. In addition to financial remuneration and participation, we offer our employees various social benefits including but not limited to: Company pension plan. 25 days annual leave plus bank holidays. Support with tooling. Excellent discount scheme with access to the best perks from some of the UK's biggest brands. Tel Us Health.

About Crown Lift Trucks Ltd Crown is one of the world's largest material handling companies with a reputation for award winning product design, advanced engineering & technology, as well as superior after sales service. For 80 years, Crown's business philosophy has utilised vertically integrated processes to design, manufacture, and distribute forward thinking, innovative solutions that improve customers' productivity and operating efficiency. Crown produces a broad range of forklifts, batteries and chargers, as well as automation solutions and fleet management technologies, and warehouse solutions products and design services. Since its founding in 1945, the family owned company has placed the customer at the heart of its business. This commitment is reflected in its brand promise: "When every minute matters, customers can count on Crown to keep their businesses moving." Job Description A forklift truck service engineer has a real responsibility, working on their own initiative to diagnose and solve problems. You are the one the customer relies upon to get his business up to speed. Good engineers are in high demand and this will only increase over the years to come. You're looking at a secure, long term career, in an industry and company that is here to stay. As a workshop engineer you will service and repair forklifts. You will be trained in all aspects of service engineering within the industry including getting hands on with hydraulics, LPG and electric systems - putting your skills to the test daily to find the problem and fix it. Learn how to install, repair and carry out planned maintenance of customer forklift trucks to Crown specifications. Undertake an appropriate engineering apprenticeship, completing set modules on time and attending college as necessary. Work shadow a colleague, and develop an understanding of workshop procedures through on job training. Attend manufacturers training and other training courses as appropriate. Learn Crown administrative procedures, and how to complete worksheets, timesheets etc. Assist in keeping customer trucks secure and clean whilst in the workshop. Ensure security and correct use and issue of all tools and spares issued. Understand and adhere to all Crown Company, legislative and Health and Safety procedures. Under close supervision, ensures all work undertaken meets industry and Crown work standards. To build and maintain good relationships with customers, colleagues and managers. Undertakes other duties which Crown may from time to time reasonably request. Person Specification Essential Skills: You must be willing to learn and have the ability to follow instructions. You must have a keen interest in engineering. Friendly and able to build relationships with colleagues and customers. A -C grades or equivalent in Maths and English as a minimum. I.T. literate and familiar with Microsoft "Word", "Excel" or equivalent software. Ability to work efficiently and accurately. Highly motivated. The ability to work as a team member and possess good interpersonal, communication and literacy skills. To work with efficiency, accuracy and to be able to meet deadlines. To be able to prioritise workload and work under own initiative. High level of flexibility and dependability. Aptitude for practical science or engineering skills. Desirable Skills: No prerequisite experience required but a demonstrable interest in mechanical engineering through school or hobby interests. Vacancy Details Hours of Work: Monday to Friday - 8 hours. At Crown, we know that our employees are the driving force behind our success in the material handling industry. We cultivate a culture of passionate people and inspired innovation. In fact, throughout Crown's history, more than 1,000 employees have reached a 25-year milestone, and we are proud to have travelled their career paths with them. From employee training and development to competitive compensation packages, we invest in our employees, knowing that people are always at the core of what moves us forward. In addition to financial remuneration and participation, we offer our employees various social benefits including but not limited to: Company pension plan. 25 days annual leave plus bank holidays. Support with tooling. Excellent discount scheme with access to the best perks from some of the UK's biggest brands. Tel Us Health.

About Crown Lift Trucks Ltd Crown is one of the world's largest material handling companies with a reputation for award-winning product design, advanced engineering & technology, as well as superior after-sales service. For 80 years, Crown's business philosophy has utilised vertically integrated processes to design, manufacture, and distribute forward-thinking, innovative solutions that improve customers' productivity and operating efficiency. Crown produces a broad range of forklifts, batteries and chargers as well as automation solutions and fleet management technologies, and warehouse solutions products and design services. Since its founding in 1945, the family-owned company has placed the customer at the heart of its business. This commitment is reflected in its brand promise: "When every minute matters, customers can count on Crown to keep their businesses moving." Job Description A forklift truck service engineer has a real responsibility, working on their own initiative to diagnose and solve problems. You are the one the customer relies upon to get his business up to speed. Good engineers are in high demand and this will only increase over the years to come. You're looking at a secure, long-term career, in an industry and company that is here to stay. As a workshop engineer you will service and repair forklifts. You will be trained in all aspects of service engineering within the industry including getting hands on with hydraulics, LPG and electric systems - putting your skills to the test daily to find the problem and fix it. Learn how to install, repair and carry out planned maintenance of customer forklift trucks to Crown specifications. Undertake an appropriate engineering apprenticeship, completing set modules on time and attending college as necessary. Work shadow a colleague, and develop an understanding of workshop procedures through on job training. Attend manufacturers training and other training courses as appropriate. Learn Crown administrative procedures, and how to complete worksheets, timesheets etc. Assist in keeping customer trucks secure and clean whilst in the workshop. Ensure security and correct use and issue of all tools and spares issued. Understand and adhere to all Crown Company, legislative and Health and Safety procedures. Under close supervision, ensures all work undertaken meets industry and Crown work standards. To build and maintain good relationships with customers, colleagues and managers. Undertakes other duties which Crown may from time to time reasonably request. Person Specification Essential Skills You must be willing to learn and have the ability to follow instructions. You must have a keen interest in engineering. Friendly and able to build relationships with colleagues and customers. A -C grades or equivalent in Maths and English as a minimum. I.T. literate and familiar with Microsoft "Word", "Excel" or equivalent software. Ability to work efficiently and accurately. Highly motivated. The ability to work as a team member and possess good interpersonal, communication and literacy skills. To work with efficiency, accuracy and to be able to meet deadlines. To be able to prioritize workload and work under own initiative. High level of flexibility and dependability. Aptitude for practical science or engineering skills. Desirable Skills No prerequisite experience required but a demonstrable interest in mechanical engineering through school or hobby interests. Vacancy Details Hours of Work: Monday to Friday - 8 hours Holidays: 25 days holiday not inclusive of bank holidays At Crown, we know that our employees are the driving force behind our success in the material handling industry. We cultivate a culture of passionate people and inspired innovation. In fact, throughout Crown's history, more than 1,000 employees have reached a 25-year milestone, and we are proud to have travelled their career paths with them. From employee training and development to competitive compensation packages, we invest in our employees, knowing that people are always at the core of what moves us forward. In addition to financial remuneration and participation, we offer our employees various social benefits including but not limited to: Company pension plan. 25 days annual leave plus bank holidays. Support with tooling Excellent discount scheme with access to the best perks from some of the UK's biggest brands. Tel Us Health

Overview We are looking for a 1st Line IT Engineer to join our Service Desk, being the first point of contact for our Award-Winning Accident Repair Network, supporting 2,500+ users across 40+ sites. Our mission is to develop the tools and technology that enable our teams to get our customers back to normal, and our Service Desk is at the front of that, keeping our people and sites running every day. The candidate will be reporting into the Service Desk Lead and working alongside our 1st, 2nd and IT Field Engineers to resolve incidents and service requests, support our in house system, Evolve. As our Service Desk grows, this role is central to delivering the service our people rely on. What You'll Be Doing Supporting 2,500+ users across 40+ sites, you'll be the first point of contact for colleagues and external clients using Evolve, our in-house body shop system, triaging and resolving issues or escalating to our 2nd line team when needed. What You'll Get You'll join an experienced, collaborative team working with Microsoft 365, Azure, Intune and HaloITSM, with plenty of variety across hardware, software and networking, and real scope to develop your skills as the Service Desk grows. Responsibilities Handle incoming calls and tickets day to day. Troubleshoot hardware, software and networking issues across a wide range of platforms. Log, categorise and prioritise tickets within HaloITSM, our ticketing system. Play a key role in onboarding and offboarding, building and configuring hardware, setting up accounts and coordinating deliveries. Guide users through fixes, create documentation and help improve our technology and processes. Monitor systems and respond to alerts, working closely with the wider IT team to resolve issues quickly. Contribute ideas to improve the service desk and share knowledge across the team. Solus, who are owned by Aviva, are one of the UK leaders in vehicle repairs, returning cars to the road in just 11 days on average and a 4.6/5 star customer rating. With an award-winning apprenticeship programme and winners of other recognised industry awards Solus are proud to be shaping the future of vehicle repair. Why Join Solus? Competitive salary based on location, skills, experience, and qualifications. Bonus opportunity tied to your performance and the overall success of Solus. Company pension scheme with employer contributions. 33 days' holiday (including bank holidays), with the option to buy or sell up to 5 days. Save money with up to 40% discount on Aviva products and other retailer discounts. Share in Aviva's success through the Aviva Save As You Earn scheme. Supportive policies including parental and carer's leave. Wellbeing focus with tools like Group Income Protection and 24/7 GP access. At Solus, we value inclusivity and welcome all applicants. If you're excited but don't tick every box, we encourage you to apply-your unique skills might be just what we need. We guarantee an interview for disabled applicants meeting the minimum criteria-just email us after applying to let us know. Ready to join us? Apply online today, and our team will be in touch within 14 days.

Overview We are looking for a 1st Line IT Engineer to join our Service Desk, being the first point of contact for our Award-Winning Accident Repair Network, supporting 2,500+ users across 40+ sites. Our mission is to develop the tools and technology that enable our teams to get our customers back to normal, and our Service Desk is at the front of that, keeping our people and sites running every day. The candidate will be reporting into the Service Desk Lead and working alongside our 1st, 2nd and IT Field Engineers to resolve incidents and service requests, support our in house system, Evolve. As our Service Desk grows, this role is central to delivering the service our people rely on. What You'll Be Doing Supporting 2,500+ users across 40+ sites, you'll be the first point of contact for colleagues and external clients using Evolve, our in house body shop system, triaging and resolving issues or escalating to our 2nd line team when needed. What You'll Get You'll join an experienced, collaborative team working with Microsoft 365, Azure, Intune and HaloITSM, with plenty of variety across hardware, software and networking, and real scope to develop your skills as the Service Desk grows. Responsibilities Handle incoming calls and tickets day to day. Troubleshoot hardware, software and networking issues across a wide range of platforms. Log, categorise and prioritise tickets within HaloITSM, our ticketing system. Play a key role in onboarding and offboarding, building and configuring hardware, setting up accounts and coordinating deliveries. Guide users through fixes, create documentation and help improve our technology and processes. Monitor systems and respond to alerts, working closely with the wider IT team to resolve issues quickly. Contribute ideas to improve the service desk and share knowledge across the team. Solus, who are owned by Aviva, are one of the UK leaders in vehicle repairs, returning cars to the road in just 11 days on average and a 4.6/5 star customer rating. With an award winning apprenticeship programme and winners of other recognised industry awards Solus are proud to be shaping the future of vehicle repair. Why Join Solus? Competitive salary based on location, skills, experience, and qualifications. Bonus opportunity tied to your performance and the overall success of Solus. Company pension scheme with employer contributions. 33 days' holiday (including bank holidays), with the option to buy or sell up to 5 days. Save money with up to 40% discount on Aviva products and other retailer discounts. Share in Aviva's success through the Aviva Save As You Earn scheme. Supportive policies including parental and carer's leave. Wellbeing focus with tools like Group Income Protection and 24/7 GP access. At Solus, we value inclusivity and welcome all applicants. If you're excited but don't tick every box, we encourage you to apply-your unique skills might be just what we need. We guarantee an interview for disabled applicants meeting the minimum criteria-just email us after applying to let us know. Ready to join us? Apply online today, and our team will be in touch within 14 days.

Base: Tewkesbury (with travel across Bromford Flagship LiveWest geography including Lichfield, Wolverhampton and Chipping Sodbury) We invest in homes and relationships so people can thrive. Supporting almost 300,000 customers across the South West, Central and East of England, BFL is the UK's largest provider of new affordable homes, delivering over 3,000 new homes every year. Alongside building homes, we're committed to maintaining the highest standards of safety, compliance and customer service. About the role This is a fantastic opportunity for an experienced Gas Safe registered heating engineer who is passionate about quality, compliance and raising standards. Reporting to the M&E Heating Service & Repair Programme Manager, you'll play a key role in ensuring our heating service and repair activities are delivered safely, compliantly and to an exceptional standard. You'll carry out both desktop and on-site quality audits, undertake pre- and post-work inspections, and provide technical support and coaching to help drive continuous improvement across our in-house teams, contractors and partners. Although based in Tewkesbury, this is a regional role covering our operating areas across Lichfield, Wolverhampton, Chipping Sodbury and the wider Bromford geography, so regular travel is an essential part of the position. What you'll be doing Carry out quality audits and inspections of gas servicing, repairs and installation work. Ensure all work complies with Gas Safety legislation, industry standards and BFL policies. Monitor work in progress and completed works, identifying opportunities to improve quality and customer outcomes. Investigate technical issues and gas-related incidents, supporting corrective and preventative actions. Provide technical advice and guidance to operational teams, contractors and managers. Support the delivery of Toolbox Talks, safety briefings and technical updates. Produce compliance reports and analyse quality and performance data to identify trends and improvements. Support the development of technical competence through coaching, auditing and training. Maintain our high standards of health, safety, compliance and customer service. Work collaboratively with colleagues across the business to continually improve service delivery. Where operationally required, use your technical expertise to support heating repairs, servicing and installations during periods of increased demand. What we're looking for You'll be an experienced domestic heating professional with a passion for doing the job right and helping others achieve high standards. You'll bring Extensive experience installing, servicing, repairing and commissioning domestic gas heating systems. Strong knowledge of Gas Safety legislation, industry standards and compliance requirements. Experience carrying out technical inspections, audits or quality assurance activities. Construction site management experience and a sound understanding of CDM Regulations. A customer-first approach with excellent communication and influencing skills. Strong attention to detail and the confidence to challenge poor practice while supporting continuous improvement. The ability to work independently, manage your own workload and build positive working relationships across multiple teams. You'll hold A recognised apprenticeship and NVQ Level 3 (or equivalent) in Plumbing, Heating or HVAC. Current CCN1 Core Gas Safety qualification. Gas Safe Registered Person status. Valid CSCS card (or equivalent). Full UK driving licence. Additional HVAC or Quality Supervisor qualifications. Benefits Salary: £45,647.45 per year, with annual salary review. Company van, fuel card, tools, uniform, mobile phone and tablet. £500 annual personal benefits fund (choose from private medical insurance, dental cover, critical illness cover or gym membership). 27 days annual leave plus bank holidays, with option to buy or sell up to 5 days. Pension options with employer contributions up to 10%. Life assurance. Comprehensive wellbeing support for you and your family, including virtual GP access and mental health resources. Retail discounts across a wide range of brands. £30 monthly drinks allowance (pro rata for part-time colleagues). Enhanced family leave policies, including maternity, paternity, adoption and carers' leave. Please note: This role requires regular travel across the Bromford geography. A full UK driving licence is essential. The successful candidate will also be required to complete a Basic DBS check. Closing date: 24th July 2026 We encourage people from all sections of our community to apply for jobs with us. Particularly, we welcome those who have been historically underrepresented in areas of our workforce including people from ethnic minority backgrounds, disabled people and members of the LGBTQIA+ community.