MTrecs new career opportunity Our client are specialists in their market sector, they are now looking to recruit a CNC Programmer who can program, set and operate Horizontal Machining centres, ideally you will have experience using Fanuc controls. The Job youll do Due to our clients continued growth, an opportunity has arisen for a highly skilled machinist to program and operate a Horizontal Machining Centre. Able to work unsupervised and interpret engineering drawings to ISO 9001:2015 Quality Standard. Program set and operate Fanuc controlled horizontal machining centres. Inspecting work using standard measuring equipment, to offer assistance to colleagues as a Lead Hand working with the Production Supervisors to report any general employee issues, planning jobs, tooling etc. Be on hand to help with any problems that may arise on the shift. Work with supervisors and colleagues to increase production, efficiency and safety. About You Must be qualified to a minimum BTEC & NVQ Level 3 in Mechanical Engineering or equivalent time served Mechanical Engineer. Must have the ability and experience to program set & operate machines to drawings and instructions. Experience operating Fanuc controls will be an advantage, but not essential as training will be given. Be able to set tool offsets. Be competent at inspecting work using standard measuring equipment. Competent at Inspecting work using standard measuring equipment. Our client offer permanent positions with excellent overtime rates and high earning potential together with flexibility on shifts either day or night shift where possible together with enhanced flexibility and allowance for annual leave. We also offer a pension scheme and life assurance benefit. Benefits: Additional leave Company events Company pension Life insurance On-site parking JBRP1_UKTJ
07/12/2025
Full time
MTrecs new career opportunity Our client are specialists in their market sector, they are now looking to recruit a CNC Programmer who can program, set and operate Horizontal Machining centres, ideally you will have experience using Fanuc controls. The Job youll do Due to our clients continued growth, an opportunity has arisen for a highly skilled machinist to program and operate a Horizontal Machining Centre. Able to work unsupervised and interpret engineering drawings to ISO 9001:2015 Quality Standard. Program set and operate Fanuc controlled horizontal machining centres. Inspecting work using standard measuring equipment, to offer assistance to colleagues as a Lead Hand working with the Production Supervisors to report any general employee issues, planning jobs, tooling etc. Be on hand to help with any problems that may arise on the shift. Work with supervisors and colleagues to increase production, efficiency and safety. About You Must be qualified to a minimum BTEC & NVQ Level 3 in Mechanical Engineering or equivalent time served Mechanical Engineer. Must have the ability and experience to program set & operate machines to drawings and instructions. Experience operating Fanuc controls will be an advantage, but not essential as training will be given. Be able to set tool offsets. Be competent at inspecting work using standard measuring equipment. Competent at Inspecting work using standard measuring equipment. Our client offer permanent positions with excellent overtime rates and high earning potential together with flexibility on shifts either day or night shift where possible together with enhanced flexibility and allowance for annual leave. We also offer a pension scheme and life assurance benefit. Benefits: Additional leave Company events Company pension Life insurance On-site parking JBRP1_UKTJ
A well-established UK manufacturer and supplier of specialist building boards, facades, and through-wall solutions is seeking an experienced Alphacam Programmer to join their Production Department. The Alphacam Programmer will be responsible for developing CNC programs from architectural and engineering drawings, supporting machine setup and operation, and ensuring all work meets strict quality and performance standards. The successful candidate will collaborate closely with engineers and production teams to optimise machining processes and deliver consistent, accurate results. Benefits: Salary up to £36,000 Location: Newcastle Under Lyme Annual leave: 26 days + bank holidays Auto enrolment pension Free onsite parking Hours: 8:30am-5pm Monday to Friday (45 minute break - 38.75hrs per week) Key Responsibilities: Develop and write CNC programs from architectural and engineering drawings Set up and operate CNC machinery Perform precision quality checks using tools such as callipers, bore gauges, and dial indicators Interpret and apply GD&T requirements Make technical decisions on machining processes and design-related requirements Collaborate with engineers, mechanics, and craftsmen to improve machining efficiency Ensure all work complies with quality policies, specifications, and procedures Experience & Skills Required: Proven experience as a CNC Programmer or similar CNC role Minimum 2 years' experience in wood or composite cutting Strong knowledge of Alphacam or comparable CAM software Proficiency in operating CNC machines and programming software Ability to understand, interpret, and edit FANUC control systems Strong mathematical skills for measurements and calculations Confident use of fixtures, tooling, and calibration equipment Ability to perform tooling offsets and tooling changes Good knowledge of machining techniques and industry best practices Strong organisational skills with the ability to work independently If this sounds like you, please apply today! :) JBRP1_UKTJ
07/12/2025
Full time
A well-established UK manufacturer and supplier of specialist building boards, facades, and through-wall solutions is seeking an experienced Alphacam Programmer to join their Production Department. The Alphacam Programmer will be responsible for developing CNC programs from architectural and engineering drawings, supporting machine setup and operation, and ensuring all work meets strict quality and performance standards. The successful candidate will collaborate closely with engineers and production teams to optimise machining processes and deliver consistent, accurate results. Benefits: Salary up to £36,000 Location: Newcastle Under Lyme Annual leave: 26 days + bank holidays Auto enrolment pension Free onsite parking Hours: 8:30am-5pm Monday to Friday (45 minute break - 38.75hrs per week) Key Responsibilities: Develop and write CNC programs from architectural and engineering drawings Set up and operate CNC machinery Perform precision quality checks using tools such as callipers, bore gauges, and dial indicators Interpret and apply GD&T requirements Make technical decisions on machining processes and design-related requirements Collaborate with engineers, mechanics, and craftsmen to improve machining efficiency Ensure all work complies with quality policies, specifications, and procedures Experience & Skills Required: Proven experience as a CNC Programmer or similar CNC role Minimum 2 years' experience in wood or composite cutting Strong knowledge of Alphacam or comparable CAM software Proficiency in operating CNC machines and programming software Ability to understand, interpret, and edit FANUC control systems Strong mathematical skills for measurements and calculations Confident use of fixtures, tooling, and calibration equipment Ability to perform tooling offsets and tooling changes Good knowledge of machining techniques and industry best practices Strong organisational skills with the ability to work independently If this sounds like you, please apply today! :) JBRP1_UKTJ
Location: Chard, Somerset Salary: £36,000 Competitive, dependent on experience Job Type: Full-Time, Permanent About Us We are a leading subcontract manufacturing company serving a wide range of industries including Aerospace, Oil & Gas, Automotive, and other precision engineering sectors. Operating to AS9100-accredited quality standards, we work with a diverse selection of materials and deliver high-quality, precision-engineered components to our customers across the UK and beyond. Role Overview We are seeking an experienced CNC Miller / Programmer / Setter to join our dynamic team. The successful candidate will have a strong background in CNC milling operations, with the ability to program, set, and operate a range of machines, ensuring components are produced to the highest standards of quality and accuracy. Key Responsibilities Program, set, and operate CNC milling machines using Fanuc, Heidenhain, and Siemens controls (experience with Mazatrol is highly advantageous). Work on 3, 4, and 5-axis machining centres, producing complex, high-precision components. Read and interpret detailed engineering drawings, ensuring dimensional accuracy and compliance with customer requirements. Machine a wide variety of materials, including exotic alloys and hard metals, to tight tolerances. Conduct quality checks using appropriate metrology and inspection equipment, following AS9100 and first-off inspection procedures. Maintain production efficiency and quality through adherence to 6S and Lean manufacturing practices. Collaborate with production, engineering, and quality teams to resolve technical or process-related issues. Work independently to manage workloads while contributing effectively as part of a team. Key Skills & Experience Minimum 5 years experience as a CNC Miller / Programmer / Setter. Strong understanding of CNC programming and toolpath optimisation. Proven experience within Aerospace, Oil & Gas, or Automotive manufacturing environments. Excellent attention to detail and commitment to precision. Knowledge of AS9100 standards and quality assurance procedures. Self-motivated with strong problem-solving skills. Desirable Attributes Experience with offline programming software (e.g. Mastercam, Edgecam, or Fusion 360). Understanding of process improvement initiatives. Flexible and adaptable to changing priorities. Benefits Competitive salary and overtime opportunities. Ongoing training and career development opportunities. Supportive team environment within a growing, quality-driven company. Pension scheme and other company benefits including privatehealth and dental care. JBRP1_UKTJ
07/12/2025
Full time
Location: Chard, Somerset Salary: £36,000 Competitive, dependent on experience Job Type: Full-Time, Permanent About Us We are a leading subcontract manufacturing company serving a wide range of industries including Aerospace, Oil & Gas, Automotive, and other precision engineering sectors. Operating to AS9100-accredited quality standards, we work with a diverse selection of materials and deliver high-quality, precision-engineered components to our customers across the UK and beyond. Role Overview We are seeking an experienced CNC Miller / Programmer / Setter to join our dynamic team. The successful candidate will have a strong background in CNC milling operations, with the ability to program, set, and operate a range of machines, ensuring components are produced to the highest standards of quality and accuracy. Key Responsibilities Program, set, and operate CNC milling machines using Fanuc, Heidenhain, and Siemens controls (experience with Mazatrol is highly advantageous). Work on 3, 4, and 5-axis machining centres, producing complex, high-precision components. Read and interpret detailed engineering drawings, ensuring dimensional accuracy and compliance with customer requirements. Machine a wide variety of materials, including exotic alloys and hard metals, to tight tolerances. Conduct quality checks using appropriate metrology and inspection equipment, following AS9100 and first-off inspection procedures. Maintain production efficiency and quality through adherence to 6S and Lean manufacturing practices. Collaborate with production, engineering, and quality teams to resolve technical or process-related issues. Work independently to manage workloads while contributing effectively as part of a team. Key Skills & Experience Minimum 5 years experience as a CNC Miller / Programmer / Setter. Strong understanding of CNC programming and toolpath optimisation. Proven experience within Aerospace, Oil & Gas, or Automotive manufacturing environments. Excellent attention to detail and commitment to precision. Knowledge of AS9100 standards and quality assurance procedures. Self-motivated with strong problem-solving skills. Desirable Attributes Experience with offline programming software (e.g. Mastercam, Edgecam, or Fusion 360). Understanding of process improvement initiatives. Flexible and adaptable to changing priorities. Benefits Competitive salary and overtime opportunities. Ongoing training and career development opportunities. Supportive team environment within a growing, quality-driven company. Pension scheme and other company benefits including privatehealth and dental care. JBRP1_UKTJ
A well-established UK manufacturer and supplier of specialist building boards, facades, and through-wall solutions is seeking an experienced Alphacam Programmer to join their Production Department. The Alphacam Programmer will be responsible for developing CNC programs from architectural and engineering drawings, supporting machine setup and operation, and ensuring all work meets strict quality and
07/12/2025
Full time
A well-established UK manufacturer and supplier of specialist building boards, facades, and through-wall solutions is seeking an experienced Alphacam Programmer to join their Production Department. The Alphacam Programmer will be responsible for developing CNC programs from architectural and engineering drawings, supporting machine setup and operation, and ensuring all work meets strict quality and
Due to expansion, Next Generation are currently recruiting for an CNC Turner to work with a leading global manufacturer who produce machined components supplying predominantly into the Oil & Gas industries. As the CNC Turner you will be responsible for programming, setting and operating Fanuc controlled Lathes. The following shifts are available for the CNC Turner: Monday - Friday (8.30am 16.00pm) Whats on offer for the CNC Turner: Competitive rate up to £18.50 per hour (DOE) (Overtime x1.3 rate Monday to Saturday) x1.5 rate on Sundays Benefits for the CNC Turner: 34 days holiday (including bank holidays) Employee Assistance Programme Free parking Free uniform Free drinks Pension Scheme Staff referral programme Development opportunities Duties of the CNC Turner: Writing and editing programs (G & M codes) Setting & Operating CNC lathes using Fanuc controls Carrying out offsets & tool changes Altering speeds and feeds Running multiple lathes at any one time Monitoring cycle times Basic machine maintenance The successful candidate for the CNC Turners position will have the following experience: 3 5 years experience Setting & Operating Doosan Puma Lathes (Essential) 3 5 years experience programming in Fanuc (Essential) Checking for defects & quality issues (Essential) Ability to manage cycle times (Essential) Excellent attention to detail (Essential) Due to the high number of applications we receive, we are sometimes not able to respond directly to each candidate. If you havent been contacted within 14 days of your application, unfortunately you have been unsuccessful on this occasion. By applying for this role your details will be submitted to Next Generation and the relevant client related to this vacancy. Next Generation work in partnership with businesses across the UK who operate within Manufacturing, Logistics & Commercial sectors. We provide permanent and contract opportunities engaging with talented candidates looking to make their next career move. JBRP1_UKTJ
06/12/2025
Full time
Due to expansion, Next Generation are currently recruiting for an CNC Turner to work with a leading global manufacturer who produce machined components supplying predominantly into the Oil & Gas industries. As the CNC Turner you will be responsible for programming, setting and operating Fanuc controlled Lathes. The following shifts are available for the CNC Turner: Monday - Friday (8.30am 16.00pm) Whats on offer for the CNC Turner: Competitive rate up to £18.50 per hour (DOE) (Overtime x1.3 rate Monday to Saturday) x1.5 rate on Sundays Benefits for the CNC Turner: 34 days holiday (including bank holidays) Employee Assistance Programme Free parking Free uniform Free drinks Pension Scheme Staff referral programme Development opportunities Duties of the CNC Turner: Writing and editing programs (G & M codes) Setting & Operating CNC lathes using Fanuc controls Carrying out offsets & tool changes Altering speeds and feeds Running multiple lathes at any one time Monitoring cycle times Basic machine maintenance The successful candidate for the CNC Turners position will have the following experience: 3 5 years experience Setting & Operating Doosan Puma Lathes (Essential) 3 5 years experience programming in Fanuc (Essential) Checking for defects & quality issues (Essential) Ability to manage cycle times (Essential) Excellent attention to detail (Essential) Due to the high number of applications we receive, we are sometimes not able to respond directly to each candidate. If you havent been contacted within 14 days of your application, unfortunately you have been unsuccessful on this occasion. By applying for this role your details will be submitted to Next Generation and the relevant client related to this vacancy. Next Generation work in partnership with businesses across the UK who operate within Manufacturing, Logistics & Commercial sectors. We provide permanent and contract opportunities engaging with talented candidates looking to make their next career move. JBRP1_UKTJ
Our client is looking for an experienced CNC Milling Programmer to join a busy and growing manufacturing business in Ross-on-Wye. This is an exciting opportunity to specialise in milling-focused CNC programming, working on a wide variety of components and tooling. Youll be responsible for both offline programming and on-machine programming, ensuring precision and efficiency in all milling operations. Key Responsibilities: CNC programming for milling using Siemens (experience with other systems also considered) Offline programming of milling operations to support efficient workflow Setting, programming, and operating CNC milling machines Producing high-quality, accurate components and tooling Ensuring efficiency, accuracy, and safety throughout the milling process What Were Looking For: Proven experience in CNC milling programming Confident with Siemens or other CNC control systems Experience with offline programming software Ability to work independently and within a team Strong attention to detail and commitment to quality Benefits: Permanent, day-shift role Competitive salary: £38,000 £40,000 Pension scheme 25 days annual leave + bank holidays If you are a skilled CNC Milling Programmer looking to specialise in a rewarding and forward-thinking role, we want to hear from you! Everlinked is operating as an equal opportunity employment agency. JBRP1_UKTJ
06/12/2025
Full time
Our client is looking for an experienced CNC Milling Programmer to join a busy and growing manufacturing business in Ross-on-Wye. This is an exciting opportunity to specialise in milling-focused CNC programming, working on a wide variety of components and tooling. Youll be responsible for both offline programming and on-machine programming, ensuring precision and efficiency in all milling operations. Key Responsibilities: CNC programming for milling using Siemens (experience with other systems also considered) Offline programming of milling operations to support efficient workflow Setting, programming, and operating CNC milling machines Producing high-quality, accurate components and tooling Ensuring efficiency, accuracy, and safety throughout the milling process What Were Looking For: Proven experience in CNC milling programming Confident with Siemens or other CNC control systems Experience with offline programming software Ability to work independently and within a team Strong attention to detail and commitment to quality Benefits: Permanent, day-shift role Competitive salary: £38,000 £40,000 Pension scheme 25 days annual leave + bank holidays If you are a skilled CNC Milling Programmer looking to specialise in a rewarding and forward-thinking role, we want to hear from you! Everlinked is operating as an equal opportunity employment agency. JBRP1_UKTJ
CNC Miller/Programmer Commutable from Liversidge, Dewsbury, Huddersfield, Bradford, Leeds, Wakefield, Halifax, Batley £35,000 - £40,000 + Mon - Thu (7:30am - 4:00pm) +Early finish on Friday (1pm) + Plenty of Overtime + 31 Days Holiday + Training + Progression This is an excellent opportunity for a CNC Miller with any level of Heidenhain experience to join a growing engineering business that offers lo
05/12/2025
Full time
CNC Miller/Programmer Commutable from Liversidge, Dewsbury, Huddersfield, Bradford, Leeds, Wakefield, Halifax, Batley £35,000 - £40,000 + Mon - Thu (7:30am - 4:00pm) +Early finish on Friday (1pm) + Plenty of Overtime + 31 Days Holiday + Training + Progression This is an excellent opportunity for a CNC Miller with any level of Heidenhain experience to join a growing engineering business that offers lo
CNC Setter / Programmer - £37,441 Mon-Fri Shifts Permanent Join a world-leading engineering company in Crewkerne and play a vital role in precision manufacturing. What's on Offer? Competitive Salary - £37,441 Stable Shifts - Rotating pattern (6am-2pm Mon-Fri / 2pm-12am Mon-Thurs) Your Role: Set and operate CNC turning machines to manufacture precision-engineered components Programme or partially programme CNC machines as needed Monitor machine performance and make necessary adjustments for optimal output Maintain a clean, safe, and efficient workspace Collaborate closely with production teams to achieve performance targets What We're Looking For: Previous experience as a CNC Setter or Programmer, this is not just an operator role and you must be able to Set or Programme Citizen machines Ability to set CNC machines to tight tolerances A strong track record in a similar role Ready to Take the Next Step? Apply now by sending your CV via this job board or contact Smart Recruitment Yeovil for more details! JBRP1_UKTJ
04/12/2025
Full time
CNC Setter / Programmer - £37,441 Mon-Fri Shifts Permanent Join a world-leading engineering company in Crewkerne and play a vital role in precision manufacturing. What's on Offer? Competitive Salary - £37,441 Stable Shifts - Rotating pattern (6am-2pm Mon-Fri / 2pm-12am Mon-Thurs) Your Role: Set and operate CNC turning machines to manufacture precision-engineered components Programme or partially programme CNC machines as needed Monitor machine performance and make necessary adjustments for optimal output Maintain a clean, safe, and efficient workspace Collaborate closely with production teams to achieve performance targets What We're Looking For: Previous experience as a CNC Setter or Programmer, this is not just an operator role and you must be able to Set or Programme Citizen machines Ability to set CNC machines to tight tolerances A strong track record in a similar role Ready to Take the Next Step? Apply now by sending your CV via this job board or contact Smart Recruitment Yeovil for more details! JBRP1_UKTJ
CNC Programmer Location: Northamptonshire Salary: £50,000 £55,000 Hours: Monday to Friday, 08 30 Contract Type: Permanent We are seeking an experienced CNC Programmer to join a high-performance Pattern Shop supporting elite-level motorsport and advanced composite manufacturing. This role is ideal for someone with strong CNC programming expertise, hands-on pattern shop experience, and a background working with composite tooling, moulds, and precision components. The successful candidate will play a key role in producing high-accuracy patterns and tooling used across complex composite structures. You will be responsible for programming multi-axis CNC machines, improving machining processes, and ensuring the highest standards of quality and precision. Key Responsibilities Create, develop, and optimise CNC programs for multi-axis machining of patterns, moulds, jigs, and composite tooling components Work closely with engineers, pattern makers, and composites teams to deliver tooling to exact specifications Interpret complex engineering drawings, assemblies, and CAD models with a high level of accuracy Select appropriate tooling, feeds, and speeds for composite and pattern-making materials including Rohacell, modelling board, carbon tooling blocks, and similar substrates Ensure components meet strict dimensional, surface finish, and structural requirements Support continuous improvement initiatives to enhance machining efficiency, accuracy, and repeatability Oversee machining operations from programming through to completion, ensuring safe and efficient workflow Collaborate with downstream manufacturing teams to align machining with next-stage processes such as trimming, laminating, or assembly Assist in maintaining machining records, tool libraries, setup sheets, and quality documentation Troubleshoot machining issues and provide proactive solutions to minimise downtime Experience & Skills Required Proven experience working in a Pattern Shop or similar precision manufacturing environment Strong CNC programming capability, ideally with multi-axis machines used for pattern and tooling manufacture Previous experience within motorsport, automotive, aerospace, or high-performance engineering (F1 or similar backgrounds highly advantageous) Ability to interpret and work from complex engineering drawings, CAD data, and assemblies Experience machining composite tooling materials, moulds, jigs, fixtures, and/or Rohacell Understanding of downstream composite processes (e.g. lay-up, trimming, autoclave tooling, assembly) Demonstrable track record of improving CNC programs for efficiency, quality, and accuracy Strong attention to detail, problem-solving capability, and commitment to high standards JBRP1_UKTJ
04/12/2025
Full time
CNC Programmer Location: Northamptonshire Salary: £50,000 £55,000 Hours: Monday to Friday, 08 30 Contract Type: Permanent We are seeking an experienced CNC Programmer to join a high-performance Pattern Shop supporting elite-level motorsport and advanced composite manufacturing. This role is ideal for someone with strong CNC programming expertise, hands-on pattern shop experience, and a background working with composite tooling, moulds, and precision components. The successful candidate will play a key role in producing high-accuracy patterns and tooling used across complex composite structures. You will be responsible for programming multi-axis CNC machines, improving machining processes, and ensuring the highest standards of quality and precision. Key Responsibilities Create, develop, and optimise CNC programs for multi-axis machining of patterns, moulds, jigs, and composite tooling components Work closely with engineers, pattern makers, and composites teams to deliver tooling to exact specifications Interpret complex engineering drawings, assemblies, and CAD models with a high level of accuracy Select appropriate tooling, feeds, and speeds for composite and pattern-making materials including Rohacell, modelling board, carbon tooling blocks, and similar substrates Ensure components meet strict dimensional, surface finish, and structural requirements Support continuous improvement initiatives to enhance machining efficiency, accuracy, and repeatability Oversee machining operations from programming through to completion, ensuring safe and efficient workflow Collaborate with downstream manufacturing teams to align machining with next-stage processes such as trimming, laminating, or assembly Assist in maintaining machining records, tool libraries, setup sheets, and quality documentation Troubleshoot machining issues and provide proactive solutions to minimise downtime Experience & Skills Required Proven experience working in a Pattern Shop or similar precision manufacturing environment Strong CNC programming capability, ideally with multi-axis machines used for pattern and tooling manufacture Previous experience within motorsport, automotive, aerospace, or high-performance engineering (F1 or similar backgrounds highly advantageous) Ability to interpret and work from complex engineering drawings, CAD data, and assemblies Experience machining composite tooling materials, moulds, jigs, fixtures, and/or Rohacell Understanding of downstream composite processes (e.g. lay-up, trimming, autoclave tooling, assembly) Demonstrable track record of improving CNC programs for efficiency, quality, and accuracy Strong attention to detail, problem-solving capability, and commitment to high standards JBRP1_UKTJ
CNC Programmer CNC Programmer Salary: £18 - £22per hour DOE Shift Pattern: 38 hours per week, flexitime (MonThurs: 6:30am08:00am start times 8x hours Mon Thurs and 5.5 hours on Fri Orion are currently working with an innovative manufacturing company based near Luton who are looking for an experienced CNC Router Programmer & Setter to join their team. If you have strong experience in CNC programming and setting Doosan machinery, then we want to hear from you! CNC Programmer Responsibilities: Programming Doosan machinery from scratch Setting up machines & performing checks to confirm quality Create CNC programs and set up CNC router machines. Interpret technical drawings and CAD models. Select tools, speeds, feeds, and cutting paths. Simulate programs to identify and resolve issues before production. Perform first-part inspections and in-process quality checks using micrometers, calipers, and gauges. Ensure compliance with health and safety standards and maintain a clean, organised work area. Collaborate with engineering and quality teams to resolve issues and meet production schedules. CNC Programmer Required Experience: 5x Years experience in CNC machining & milling Experience working with Doosan machinery Strong experience with 3 axis milling machines Advanced in CNC programming & setting CAD experience would be advantageous ( Delcam or Space claim) Proficient in reading and interpreting technical drawings, GD&T, and CAD models. Experience using machine controls and CAM software. Knowledge of machining different materials (aluminium, stainless steel, plastics). Ability to troubleshoot and resolve machining issues. Time-served Apprenticeship in Engineering or HNC/HND equivalent. Excellent organisational and communication skills, with a strong eye for detail. If you like the look of this CNC Programmer, then click and apply or if you would like further information, please contact Katie Maisey at or call INDMAN Thank you for your application. Due to the volume of applications we receive, unfortunately, we are not able to respond to every application personally, therefore, if you have not heard back from us within 5 working days please assume your application has been unsuccessful. To see our other available vacancies please visit our website. JBRP1_UKTJ
04/12/2025
Full time
CNC Programmer CNC Programmer Salary: £18 - £22per hour DOE Shift Pattern: 38 hours per week, flexitime (MonThurs: 6:30am08:00am start times 8x hours Mon Thurs and 5.5 hours on Fri Orion are currently working with an innovative manufacturing company based near Luton who are looking for an experienced CNC Router Programmer & Setter to join their team. If you have strong experience in CNC programming and setting Doosan machinery, then we want to hear from you! CNC Programmer Responsibilities: Programming Doosan machinery from scratch Setting up machines & performing checks to confirm quality Create CNC programs and set up CNC router machines. Interpret technical drawings and CAD models. Select tools, speeds, feeds, and cutting paths. Simulate programs to identify and resolve issues before production. Perform first-part inspections and in-process quality checks using micrometers, calipers, and gauges. Ensure compliance with health and safety standards and maintain a clean, organised work area. Collaborate with engineering and quality teams to resolve issues and meet production schedules. CNC Programmer Required Experience: 5x Years experience in CNC machining & milling Experience working with Doosan machinery Strong experience with 3 axis milling machines Advanced in CNC programming & setting CAD experience would be advantageous ( Delcam or Space claim) Proficient in reading and interpreting technical drawings, GD&T, and CAD models. Experience using machine controls and CAM software. Knowledge of machining different materials (aluminium, stainless steel, plastics). Ability to troubleshoot and resolve machining issues. Time-served Apprenticeship in Engineering or HNC/HND equivalent. Excellent organisational and communication skills, with a strong eye for detail. If you like the look of this CNC Programmer, then click and apply or if you would like further information, please contact Katie Maisey at or call INDMAN Thank you for your application. Due to the volume of applications we receive, unfortunately, we are not able to respond to every application personally, therefore, if you have not heard back from us within 5 working days please assume your application has been unsuccessful. To see our other available vacancies please visit our website. JBRP1_UKTJ
CNC Programmer £36,000 - £40,000 + Overtime + Days + Training + 39 Hour Week + Excellent Benefits Eastleigh, Hampshire (Commutable from: Southampton, Botley, Chandler's Ford, Portsmouth, Winchester) Do you have CNC programming experience, looking for a days-based position with a well-established business who can offer you long-term job security and a great work life balance? On offer is an excellent opportunity to join a specialist manufacturer where you will work as part of a close-knit team in a modern workshop with overtime on offer to boost earnings. The company are at the forefront of their industry and have a fantastic reputation amongst their loyal client base. Due to their continued success, they are looking to bring in another CNC Programmer to their in-house machine shop team. In this varied workshop-based role, you will be responsible for setting, operating and programming machines to produce quality machined parts. You will be working Monday - Friday days basis within a purpose-built modern facility. This is a fantastic opportunity to join a leading manufacturer in a role offering excellent work-life balance, long term job security, and future career opportunities. The Role: Setting, operating & programming CNC machinery Producing high precision equipment Monday - Friday (39 Hours) The Person: Strong CNC Programming background Proficient with FANUC Commutable to Eastleigh Job Reference Number: 264927 To apply for this role or to be considered for further roles, please click 'Apply Now' or contact Jack Banks at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates. JBRP1_UKTJ
04/12/2025
Full time
CNC Programmer £36,000 - £40,000 + Overtime + Days + Training + 39 Hour Week + Excellent Benefits Eastleigh, Hampshire (Commutable from: Southampton, Botley, Chandler's Ford, Portsmouth, Winchester) Do you have CNC programming experience, looking for a days-based position with a well-established business who can offer you long-term job security and a great work life balance? On offer is an excellent opportunity to join a specialist manufacturer where you will work as part of a close-knit team in a modern workshop with overtime on offer to boost earnings. The company are at the forefront of their industry and have a fantastic reputation amongst their loyal client base. Due to their continued success, they are looking to bring in another CNC Programmer to their in-house machine shop team. In this varied workshop-based role, you will be responsible for setting, operating and programming machines to produce quality machined parts. You will be working Monday - Friday days basis within a purpose-built modern facility. This is a fantastic opportunity to join a leading manufacturer in a role offering excellent work-life balance, long term job security, and future career opportunities. The Role: Setting, operating & programming CNC machinery Producing high precision equipment Monday - Friday (39 Hours) The Person: Strong CNC Programming background Proficient with FANUC Commutable to Eastleigh Job Reference Number: 264927 To apply for this role or to be considered for further roles, please click 'Apply Now' or contact Jack Banks at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates. JBRP1_UKTJ
A Position is available for a reliable fully Skilled CNC Turner Setter/Operator/Programmer to join our small team of precision machinists at a well-established reputable precision engineering company based in Rugby. We supply high quality CNC machined components to the following industries: Motor Sport F1 / GT & Rally Components. Medical Equipment & Instrumentation. Data Acquisition Equipment. Defense Engineering. Automation & Process Control Equipment. Automotive Manufacturing. Robotics. Working Hours: Monday to Thursday 7.30am - 4.00pm and Friday 7.30am - 3.00pm. Employment Type: Permanent Full Time. Weekly Hours: 39 Hours + Occasional Overtime when needed Rate: £34,476 - £36,504 PA The CNC Turner Setter/Operator/Programmer Role: Program, Set and operate 2axis CNC Lathes Working on Fanuc controls Read and interpret engineering drawings to BS / ISO standards Complete 1st off, prove out and inspection Meet production deadlines Quality Inspection of parts using micrometers, verniers and gauges etc. De-burr parts using various hand tools. Working independently and as part of a team. Carry out any other duties as required and deemed appropriate. The Candidate: Skilled in setting and operating CNC Lathes and tooling as well as using precision measurement equipment. Programming at the control experience and G Code Knowledge essential. Ability to read and interpret mechanical documents and drawings Computer savvy with excellent understanding of CNC programs Mechanical aptitude and good math skills A keen eye for detail and good communication abilities. Ability to plan and work from own initiative, with minimum supervision. Applicants will need to demonstrate attention to detail and reliability. Have a great work ethic, a flexible approach and good attitude. Punctual and reliable. Able to work under pressure and to deadlines with a high level of quality standards achieved Willing to work occasional overtime, sometimes at short notice. Motivated and an excellent team player. Experience in offline programming, esp Feature Cam / Fusion 360 would be an advantage but not necessary NO RECRUITMENT AGENCIES PLEASE. JBRP1_UKTJ
04/12/2025
Full time
A Position is available for a reliable fully Skilled CNC Turner Setter/Operator/Programmer to join our small team of precision machinists at a well-established reputable precision engineering company based in Rugby. We supply high quality CNC machined components to the following industries: Motor Sport F1 / GT & Rally Components. Medical Equipment & Instrumentation. Data Acquisition Equipment. Defense Engineering. Automation & Process Control Equipment. Automotive Manufacturing. Robotics. Working Hours: Monday to Thursday 7.30am - 4.00pm and Friday 7.30am - 3.00pm. Employment Type: Permanent Full Time. Weekly Hours: 39 Hours + Occasional Overtime when needed Rate: £34,476 - £36,504 PA The CNC Turner Setter/Operator/Programmer Role: Program, Set and operate 2axis CNC Lathes Working on Fanuc controls Read and interpret engineering drawings to BS / ISO standards Complete 1st off, prove out and inspection Meet production deadlines Quality Inspection of parts using micrometers, verniers and gauges etc. De-burr parts using various hand tools. Working independently and as part of a team. Carry out any other duties as required and deemed appropriate. The Candidate: Skilled in setting and operating CNC Lathes and tooling as well as using precision measurement equipment. Programming at the control experience and G Code Knowledge essential. Ability to read and interpret mechanical documents and drawings Computer savvy with excellent understanding of CNC programs Mechanical aptitude and good math skills A keen eye for detail and good communication abilities. Ability to plan and work from own initiative, with minimum supervision. Applicants will need to demonstrate attention to detail and reliability. Have a great work ethic, a flexible approach and good attitude. Punctual and reliable. Able to work under pressure and to deadlines with a high level of quality standards achieved Willing to work occasional overtime, sometimes at short notice. Motivated and an excellent team player. Experience in offline programming, esp Feature Cam / Fusion 360 would be an advantage but not necessary NO RECRUITMENT AGENCIES PLEASE. JBRP1_UKTJ
We are working with a growing manufacturing business in Downham Market to recruit an experienced CNC Programmer. This is a fantastic opportunity for someone with woodworking or metal machining experience to join a forward-thinking team and make a real impact on production efficiency and product quality. The Role: As a CNC Programmer, you'll develop, optimise, and maintain CNC programs for machining door panels and components, translating designs into precise, high-quality products. You'll work closely with production and engineering teams, ensuring efficiency and accuracy at every stage. Key Responsibilities: Program CNC machines using CAD/CAM software (e.g., X-Door, CalWin) for 3-5 axis routing operations. Interpret technical drawings to create accurate machining programs for door panels, rails, stiles, grooves, and decorative inserts. Prepare machines, load tooling, perform first-off testing, and validate program accuracy. Troubleshoot programs and support operators to maximise efficiency and maintain quality standards. Maintain documentation including setup sheets, tooling lists, and program libraries. Analyse production data to suggest process improvements and implement lean practices. Requirements: 3+ years of experience as a CNC Programmer, ideally in woodworking or door/panel components. Strong knowledge of 3-5 axis CNC operations, tooling selection, and G-code/CAM generation. Proficiency in CAD/CAM software (X-Door, CalWin, or similar). Excellent analytical, troubleshooting, and organisational skills. Effective communicator with the ability to work collaboratively with operators, engineers, and supervisors. Why Join: Competitive salary £35,000-£45,000 + annual bonus. Benefits package and career development opportunities. Work in a supportive and growing team environment. Make a tangible impact in a dynamic manufacturing business. If you are an experienced CNC Programmer looking for a new challenge, we want to hear from you! Apply now to join a company that values skill, precision, and continuous improvement. JBRP1_UKTJ
04/12/2025
Full time
We are working with a growing manufacturing business in Downham Market to recruit an experienced CNC Programmer. This is a fantastic opportunity for someone with woodworking or metal machining experience to join a forward-thinking team and make a real impact on production efficiency and product quality. The Role: As a CNC Programmer, you'll develop, optimise, and maintain CNC programs for machining door panels and components, translating designs into precise, high-quality products. You'll work closely with production and engineering teams, ensuring efficiency and accuracy at every stage. Key Responsibilities: Program CNC machines using CAD/CAM software (e.g., X-Door, CalWin) for 3-5 axis routing operations. Interpret technical drawings to create accurate machining programs for door panels, rails, stiles, grooves, and decorative inserts. Prepare machines, load tooling, perform first-off testing, and validate program accuracy. Troubleshoot programs and support operators to maximise efficiency and maintain quality standards. Maintain documentation including setup sheets, tooling lists, and program libraries. Analyse production data to suggest process improvements and implement lean practices. Requirements: 3+ years of experience as a CNC Programmer, ideally in woodworking or door/panel components. Strong knowledge of 3-5 axis CNC operations, tooling selection, and G-code/CAM generation. Proficiency in CAD/CAM software (X-Door, CalWin, or similar). Excellent analytical, troubleshooting, and organisational skills. Effective communicator with the ability to work collaboratively with operators, engineers, and supervisors. Why Join: Competitive salary £35,000-£45,000 + annual bonus. Benefits package and career development opportunities. Work in a supportive and growing team environment. Make a tangible impact in a dynamic manufacturing business. If you are an experienced CNC Programmer looking for a new challenge, we want to hear from you! Apply now to join a company that values skill, precision, and continuous improvement. JBRP1_UKTJ
Location: Long Eaton, Nottingham (NG10) Pay: Up to £18.00 per hour experienced Programmer/Setter Around £16.50 per hour experienced Setter (depending on skills and capability) Hours: Monday to Thursday 06 00, Friday 06 30 Employment: Permanent, full-time About the Company A well-established subcontract precision engineering company based in Long Eaton, supplying high-quality machined components to the automotive, rail, and general engineering sectors. Due to continued growth, they are looking for an experienced CNC Programmer/Setter to join their skilled and friendly team. The Role Setting and programming CNC milling and turning machines for small to medium batch work. Loading tooling, setting offsets, and proving out new jobs from engineering drawings. Creating and adjusting programs at the machine to optimise efficiency and accuracy. Carrying out first-off and in-process inspections using micrometers, verniers, and gauges. Maintaining a clean, safe, and organised work area. Machine & Control Details Milling Controls: Hurco WinMax and Siemens Turning Controls: Hurco WinMax, Fanuc, and Sinumerik (Experience with other control systems is also welcome full training can be provided on these controls.) Requirements Proven experience in setting and/or programming CNC milling or turning machines. Familiar with Hurco, Siemens, Fanuc, or Sinumerik controls. Ability to read and interpret technical drawings. Quality-focused, reliable, and self-motivated. Able to work both independently and as part of a small team. Whats on Offer Competitive hourly rate up to £18.00 (depending on experience). Early finish every Friday at 12:30. Clean, modern workshop with long-term job stability. Ongoing training and development. How to Apply Apply by clicking Apply and sending your CV over today. JBRP1_UKTJ
04/12/2025
Full time
Location: Long Eaton, Nottingham (NG10) Pay: Up to £18.00 per hour experienced Programmer/Setter Around £16.50 per hour experienced Setter (depending on skills and capability) Hours: Monday to Thursday 06 00, Friday 06 30 Employment: Permanent, full-time About the Company A well-established subcontract precision engineering company based in Long Eaton, supplying high-quality machined components to the automotive, rail, and general engineering sectors. Due to continued growth, they are looking for an experienced CNC Programmer/Setter to join their skilled and friendly team. The Role Setting and programming CNC milling and turning machines for small to medium batch work. Loading tooling, setting offsets, and proving out new jobs from engineering drawings. Creating and adjusting programs at the machine to optimise efficiency and accuracy. Carrying out first-off and in-process inspections using micrometers, verniers, and gauges. Maintaining a clean, safe, and organised work area. Machine & Control Details Milling Controls: Hurco WinMax and Siemens Turning Controls: Hurco WinMax, Fanuc, and Sinumerik (Experience with other control systems is also welcome full training can be provided on these controls.) Requirements Proven experience in setting and/or programming CNC milling or turning machines. Familiar with Hurco, Siemens, Fanuc, or Sinumerik controls. Ability to read and interpret technical drawings. Quality-focused, reliable, and self-motivated. Able to work both independently and as part of a small team. Whats on Offer Competitive hourly rate up to £18.00 (depending on experience). Early finish every Friday at 12:30. Clean, modern workshop with long-term job stability. Ongoing training and development. How to Apply Apply by clicking Apply and sending your CV over today. JBRP1_UKTJ
CNC Miller, Programmer, Setter, Operator - 5-axis Automation Are you an experienced small to medium batch CNC 5-axis Miller Programmer, Setter, Operator, ideally with some multi-pallet experience? Do you have a passion for precision engineering and a commitment to excellence? Do you thrive in a dynamic team environment and want to work for a company where your contributions make a real difference? Join Penta, where our Core Target is to be the engineering company everyone wants to work for and buy from! As a CNC Miller, Programmer, Setter, Operator in our 5-axis automation team, you'll collaborate closely with our teammates to consistently deliver high-quality components. You'll be responsible for maximising machining efficiency and utilisation, embracing continuous improvement to enhance production flow and quality outcomes. Key Responsibilities Program, Set, and Operate 5-axis, automated, multi-pallet CNC Milling Machines using Fusion 360 CAD/CAM software: Independently devise work holding, working methods, and machining processes for small to medium batch production. Adhere to standardised procedures: Follow programming, tooling, and filing procedures. Consistently produce high-quality components: Achieve 'right first time' first-offs. Beat planned card times securely: Strive to shorten expected production times with robust methods. Improve machining methods: Continually test and refine methods without compromising stability and a consistent quality outcome. Identify and address Issues: Embrace opportunities for improvement. About Penta Founded in 1998 by five engineers, Penta has grown into a trusted partner for aerospace, defence, medical, marine and scientific industries. At Penta, we believe that a business is only as strong as its people. We emphasise healthy, smart, and aligned teamwork to create the best work-life experience for our employees. Guided by our Core Values, business plan (V/TO), Flywheel, and lean principles, we are committed to eliminating inefficiencies and adding value at every step. We seek team members who are not only skilled technicians but also excellent communicators and collaborators. Penta's strength lies in our disciplined approach, engaging in thoughtful debate, and taking action in the best interests of the company and our team. Our ideal candidate is flexible, has a positive attitude, and strives for continuous improvement both personally and professionally. We foster a work environment where work is enjoyable for all, and we are dedicated to the development and well-being of our team. Interested in progressing your career as a CNC Miller? Join Penta and be part of a dedicated and innovative team. Apply today. JBRP1_UKTJ
04/12/2025
Full time
CNC Miller, Programmer, Setter, Operator - 5-axis Automation Are you an experienced small to medium batch CNC 5-axis Miller Programmer, Setter, Operator, ideally with some multi-pallet experience? Do you have a passion for precision engineering and a commitment to excellence? Do you thrive in a dynamic team environment and want to work for a company where your contributions make a real difference? Join Penta, where our Core Target is to be the engineering company everyone wants to work for and buy from! As a CNC Miller, Programmer, Setter, Operator in our 5-axis automation team, you'll collaborate closely with our teammates to consistently deliver high-quality components. You'll be responsible for maximising machining efficiency and utilisation, embracing continuous improvement to enhance production flow and quality outcomes. Key Responsibilities Program, Set, and Operate 5-axis, automated, multi-pallet CNC Milling Machines using Fusion 360 CAD/CAM software: Independently devise work holding, working methods, and machining processes for small to medium batch production. Adhere to standardised procedures: Follow programming, tooling, and filing procedures. Consistently produce high-quality components: Achieve 'right first time' first-offs. Beat planned card times securely: Strive to shorten expected production times with robust methods. Improve machining methods: Continually test and refine methods without compromising stability and a consistent quality outcome. Identify and address Issues: Embrace opportunities for improvement. About Penta Founded in 1998 by five engineers, Penta has grown into a trusted partner for aerospace, defence, medical, marine and scientific industries. At Penta, we believe that a business is only as strong as its people. We emphasise healthy, smart, and aligned teamwork to create the best work-life experience for our employees. Guided by our Core Values, business plan (V/TO), Flywheel, and lean principles, we are committed to eliminating inefficiencies and adding value at every step. We seek team members who are not only skilled technicians but also excellent communicators and collaborators. Penta's strength lies in our disciplined approach, engaging in thoughtful debate, and taking action in the best interests of the company and our team. Our ideal candidate is flexible, has a positive attitude, and strives for continuous improvement both personally and professionally. We foster a work environment where work is enjoyable for all, and we are dedicated to the development and well-being of our team. Interested in progressing your career as a CNC Miller? Join Penta and be part of a dedicated and innovative team. Apply today. JBRP1_UKTJ
We are Recruiting on behalf of our client based in Dudley for an experienced CNC Setter with strong turning experience to join our production team. The role involves setting and operating CNC machines, working primarily with Mazatrol controls, alongside some Fanuc and Siemens systems. Experience with bar feeders, automatic bar feeders, and Gatling systems is required. Milling knowledge is beneficial but not essential. Key Responsibilities Set and operate CNC lathes with Mazatrol, Fanuc, and Siemens controls (primarily Mazatrol). Configure barfeeders, automatic barfeeders, and Gatling systems for production. Ensure accurate setting to meet quality standards and production targets. Carry out first-off checks and monitor output for consistency. Support continuous improvement in processes and machine efficiency. Maintain a safe and clean working environment. Requirements Proven CNC setting experience with a focus on turning. Strong knowledge of Mazatrol controls (essential), with exposure to Fanuc and Siemens desirable. Experience with barfeeders, automatic barfeeders, and Gatling loading systems. Milling experience useful but not essential. Ability to interpret technical drawings and specifications. Attention to detail and commitment to quality standards. Ability to work independently and within a team environment. Hours of Work: Monday Thursday: 8:00am 4:15pm Friday: 8:00am 3:30pm JBRP1_UKTJ
04/12/2025
Full time
We are Recruiting on behalf of our client based in Dudley for an experienced CNC Setter with strong turning experience to join our production team. The role involves setting and operating CNC machines, working primarily with Mazatrol controls, alongside some Fanuc and Siemens systems. Experience with bar feeders, automatic bar feeders, and Gatling systems is required. Milling knowledge is beneficial but not essential. Key Responsibilities Set and operate CNC lathes with Mazatrol, Fanuc, and Siemens controls (primarily Mazatrol). Configure barfeeders, automatic barfeeders, and Gatling systems for production. Ensure accurate setting to meet quality standards and production targets. Carry out first-off checks and monitor output for consistency. Support continuous improvement in processes and machine efficiency. Maintain a safe and clean working environment. Requirements Proven CNC setting experience with a focus on turning. Strong knowledge of Mazatrol controls (essential), with exposure to Fanuc and Siemens desirable. Experience with barfeeders, automatic barfeeders, and Gatling loading systems. Milling experience useful but not essential. Ability to interpret technical drawings and specifications. Attention to detail and commitment to quality standards. Ability to work independently and within a team environment. Hours of Work: Monday Thursday: 8:00am 4:15pm Friday: 8:00am 3:30pm JBRP1_UKTJ
We are working with a reputable client based in Luton (LU3)who require a CNC Miller Programmer / Setter Operatorto join their team. The position is a permanent role paying£45,000 - £50,000per annum(DOE) Working Hours: Monday - Thursday 6am - 4pm or 8am - 6pm (40 hours per week) 28 days holiday (includingbank holidays) + Peoples Pension. The ideal candidate will have experiencein working within an engineeringenvironment. The right candidate will have excellentCNC programmingand settingexperience. Key Responsibilities: Responsible for programmingand settingup to 5 axismachinery Reading and interpreting technical information Writingprogrammes from scratch using G and M codes(online and offline) Familiar with managing and operating Fanuc controls Producing components to tight tolerances Ability to use a range of precision measuring instruments Quality checking components Other general duties when required Key Requirements: Minimum of 2 years experience within a similar role Must be PCliterate Excellent attention to detail If you are interested in the roleor would like further information, please apply with an updated CV. JBRP1_UKTJ
04/12/2025
Full time
We are working with a reputable client based in Luton (LU3)who require a CNC Miller Programmer / Setter Operatorto join their team. The position is a permanent role paying£45,000 - £50,000per annum(DOE) Working Hours: Monday - Thursday 6am - 4pm or 8am - 6pm (40 hours per week) 28 days holiday (includingbank holidays) + Peoples Pension. The ideal candidate will have experiencein working within an engineeringenvironment. The right candidate will have excellentCNC programmingand settingexperience. Key Responsibilities: Responsible for programmingand settingup to 5 axismachinery Reading and interpreting technical information Writingprogrammes from scratch using G and M codes(online and offline) Familiar with managing and operating Fanuc controls Producing components to tight tolerances Ability to use a range of precision measuring instruments Quality checking components Other general duties when required Key Requirements: Minimum of 2 years experience within a similar role Must be PCliterate Excellent attention to detail If you are interested in the roleor would like further information, please apply with an updated CV. JBRP1_UKTJ
Title: CNC Miller Programmer Location: Rustington Salary: £16.00 - £20.00 per hour Shift: Days Benefits: Overtime paid at 1.5x hourly rate, Company pension, Relocation assistance, Supportive workplace culture with opportunities for development A market-leading UK precision engineering manufacturer, serving high-performance sectors including aerospace, defence and motorsport, is expanding following continued investment in technology and innovation. The business is known for its world-class machining capability and commitment to quality. We are looking for an experienced 5-Axis CNC Machinist/Programmer to support the production of complex, high-tolerance machined castings. Youll play a key role in proving out new products and batch work while ensuring exceptional accuracy and efficiency. CNC Miller Programmer Responsibilities: Set and operate 5-axis CNC machines for new product development and batch production Create and edit programs using Mazak (Mazatrol Smooth) and/or Heidenhain controls Work from technical drawings and specifications to determine machining operations Prove out complex parts engineered offline and confidently resolve machining challenges Carry out in-process measurements using precision instruments (calipers, micrometers, gauges) Perform routine maintenance to optimise machine performance Collaborate with engineering teams to improve processes and enhance product quality Maintain a safe, clean and organised work environment CNC Miller Programmer Experience: Level 3 machining qualification Minimum five years experience machining complex ferrous and non-ferrous components Skilled with Heidenhain and/or Mazak 5-axis controls (offline programming experience welcome) Strong analytical and problem-solving skills with confidence in proving out development parts Ability to interpret technical drawings with excellent attention to detail Able to work independently and as part of a team in a fast-paced environment For more information on the CNC Miller Programmer position contact Ewan Smyth at Stirling Warrington JBRP1_UKTJ
04/12/2025
Full time
Title: CNC Miller Programmer Location: Rustington Salary: £16.00 - £20.00 per hour Shift: Days Benefits: Overtime paid at 1.5x hourly rate, Company pension, Relocation assistance, Supportive workplace culture with opportunities for development A market-leading UK precision engineering manufacturer, serving high-performance sectors including aerospace, defence and motorsport, is expanding following continued investment in technology and innovation. The business is known for its world-class machining capability and commitment to quality. We are looking for an experienced 5-Axis CNC Machinist/Programmer to support the production of complex, high-tolerance machined castings. Youll play a key role in proving out new products and batch work while ensuring exceptional accuracy and efficiency. CNC Miller Programmer Responsibilities: Set and operate 5-axis CNC machines for new product development and batch production Create and edit programs using Mazak (Mazatrol Smooth) and/or Heidenhain controls Work from technical drawings and specifications to determine machining operations Prove out complex parts engineered offline and confidently resolve machining challenges Carry out in-process measurements using precision instruments (calipers, micrometers, gauges) Perform routine maintenance to optimise machine performance Collaborate with engineering teams to improve processes and enhance product quality Maintain a safe, clean and organised work environment CNC Miller Programmer Experience: Level 3 machining qualification Minimum five years experience machining complex ferrous and non-ferrous components Skilled with Heidenhain and/or Mazak 5-axis controls (offline programming experience welcome) Strong analytical and problem-solving skills with confidence in proving out development parts Ability to interpret technical drawings with excellent attention to detail Able to work independently and as part of a team in a fast-paced environment For more information on the CNC Miller Programmer position contact Ewan Smyth at Stirling Warrington JBRP1_UKTJ
CNC Programmer (Mazak) £47,000 - £53,000 + Unlimited 1.5x Optional Paid Overtime + 9% Employer Pension Contribution (18% Total) + 33 Holiday Days + Progression + Training + 3X Life Insurance + Day Shifts + No Weekend Work + 40 Hour Working Week Workshop Based - Commutable From Stonehouse, Lydney, Gloucester, Yate, Bristol And Swindon Are you a CNC Miller with experience on Mazak machines that is looking to step into a highly autonomous role that offers full technical training into the role through in-house experts with the scope of you to become a go-to technical expert within your field, all whilst having the option of unlimited 1.5x overtime so you can significantly increase your earnings? On offer is a role working on cutting edge, industry leading equipment, where you will gain experience working with high value exotic materials, with the goal of you to become a recognised expert within your field that has an abundance of varied experience, combined with working for a business that has a clear route of progression to senior level roles, or positions off the tools. This company are an industry leading, blue-chip manufacturers of exotic and high value materials, where they have built up a fantastic reputation for the work they complete and how they treat their staff. They have had exponential growth in recent years, resulting in them looking to expand their workforce. On offer is a role with more responsibility, where you will be able to showcase your skill set , in addition to working for a company that contributes 9% of your salary to your pension, as well as providing the option of 1.5x overtime so you can significantly increase your earnings. This role would suit a CNC Miller with Programming experience that is looking to step into a highly autonomous role that offer full technical training into the role, combined with having optional 1.5X overtime sop you can significantly increase your earnings, on top of being able to maintain a great work-life balance as you will only have to work Monday - Friday, 8am - 4pm. The Role: CNC Programming on Mazak Machines Full technical training into the role Unlimited 1.5x overtime Monday - Friday, 8am - 4pm The Candidate: CNC Miller with Mazak experience Based within commutable distance from Stonehouse, or plan to relocate Eager to train and develop as an individual JBRP1_UKTJ
04/12/2025
Full time
CNC Programmer (Mazak) £47,000 - £53,000 + Unlimited 1.5x Optional Paid Overtime + 9% Employer Pension Contribution (18% Total) + 33 Holiday Days + Progression + Training + 3X Life Insurance + Day Shifts + No Weekend Work + 40 Hour Working Week Workshop Based - Commutable From Stonehouse, Lydney, Gloucester, Yate, Bristol And Swindon Are you a CNC Miller with experience on Mazak machines that is looking to step into a highly autonomous role that offers full technical training into the role through in-house experts with the scope of you to become a go-to technical expert within your field, all whilst having the option of unlimited 1.5x overtime so you can significantly increase your earnings? On offer is a role working on cutting edge, industry leading equipment, where you will gain experience working with high value exotic materials, with the goal of you to become a recognised expert within your field that has an abundance of varied experience, combined with working for a business that has a clear route of progression to senior level roles, or positions off the tools. This company are an industry leading, blue-chip manufacturers of exotic and high value materials, where they have built up a fantastic reputation for the work they complete and how they treat their staff. They have had exponential growth in recent years, resulting in them looking to expand their workforce. On offer is a role with more responsibility, where you will be able to showcase your skill set , in addition to working for a company that contributes 9% of your salary to your pension, as well as providing the option of 1.5x overtime so you can significantly increase your earnings. This role would suit a CNC Miller with Programming experience that is looking to step into a highly autonomous role that offer full technical training into the role, combined with having optional 1.5X overtime sop you can significantly increase your earnings, on top of being able to maintain a great work-life balance as you will only have to work Monday - Friday, 8am - 4pm. The Role: CNC Programming on Mazak Machines Full technical training into the role Unlimited 1.5x overtime Monday - Friday, 8am - 4pm The Candidate: CNC Miller with Mazak experience Based within commutable distance from Stonehouse, or plan to relocate Eager to train and develop as an individual JBRP1_UKTJ
CNC Turner Location: Wimborne, Dorset Salary: Up to £50k per annum (negotiable, dependant on experience) Benefits: 20 days holiday + bank holidays 25% late shift premium Overtime available at 1.5x Free onsite parking Free hot and cold refreshments Social events including annual Christmas party, team nights out, and charity golf days Supportive, family-orientated team environment with excellent retention and a loyal client base About the Company We are working with a respected precision engineering business based in the Dorset area. This company is a trusted Tier 1 supplier to a major global aerospace organisation and manufactures complex components for a diverse range of industries, including oil & gas, nuclear, and water purification. Operating from a modern facility with high-end CNC machinery, this business is known for its low staff turnover, stable workload, and strong commitment to quality and customer service. They pride themselves on offering a clean, well-equipped environment and a friendly, down-to-earth team culture. Role Overview Our client is seeking an experienced CNC Turner who can confidently program, set, and operate CNC lathes on a late shift. Candidates should have experience working on live tooling lathes with Fanuc controls and ideally be familiar with CMZ MillTurn machines. This role involves machining small-to-medium batch runs to fine tolerances across a variety of challenging materials. Key Responsibilities: Program, set, and operate CNC lathes with live tooling Work to fine tolerances on materials including Aluminium, Stainless Steel, Titanium, Inconel, and Bronze Produce batch sizes ranging from 5 to 100 components Read and interpret technical drawings to ensure components meet exacting specifications Maintain high standards of quality throughout production Communicate effectively with colleagues to ensure workflow efficiency Candidate Profile: Proven experience as a CNC Turner with live tooling experience Confident with Fanuc controls (essential) Familiarity with CMZ MillTurn lathes (desirable) CADCAM knowledge is an advantage but not essential A strong work ethic and ability to work unsupervised during late shifts Quality-focused with a high level of attention to detail Hours: Monday to Thursday, 4:00 PM 2:00 AM Up to £20p/hr (negotiable, dependant on experience) + 25% late shift premium Overtime paid at 1.5x standard rate Interested? If youre an experienced CNC Turner who enjoys working in a fast-paced, precision-led environmentand youre ready to take on a well-compensated late-shift rolethis is a fantastic opportunity to join a well-established and respected business. To apply or learn more, please contact our specialist recruitment team with your up-to-date CV. Bolt-On Personneland our clients are equal opportunity employers who seek to recruit and appoint the best available person for a job regardless of marital/civil partnership status, sex, age, religion, belief, race, nationality and ethnic or national origin, colour, sexual orientation or disability. Bolt-On Personnel and our clients apply all relevant Data Protection laws when processing your Personal Data. If you choose to apply to this opportunity and share your CV or other personal information with Bolt-On Personnel, these details will be held by us in accordance with our privacy policy used by our recruitment team to contact you regarding this or other relevant opportunities at Bolt-On Personnel. JBRP1_UKTJ
04/12/2025
Full time
CNC Turner Location: Wimborne, Dorset Salary: Up to £50k per annum (negotiable, dependant on experience) Benefits: 20 days holiday + bank holidays 25% late shift premium Overtime available at 1.5x Free onsite parking Free hot and cold refreshments Social events including annual Christmas party, team nights out, and charity golf days Supportive, family-orientated team environment with excellent retention and a loyal client base About the Company We are working with a respected precision engineering business based in the Dorset area. This company is a trusted Tier 1 supplier to a major global aerospace organisation and manufactures complex components for a diverse range of industries, including oil & gas, nuclear, and water purification. Operating from a modern facility with high-end CNC machinery, this business is known for its low staff turnover, stable workload, and strong commitment to quality and customer service. They pride themselves on offering a clean, well-equipped environment and a friendly, down-to-earth team culture. Role Overview Our client is seeking an experienced CNC Turner who can confidently program, set, and operate CNC lathes on a late shift. Candidates should have experience working on live tooling lathes with Fanuc controls and ideally be familiar with CMZ MillTurn machines. This role involves machining small-to-medium batch runs to fine tolerances across a variety of challenging materials. Key Responsibilities: Program, set, and operate CNC lathes with live tooling Work to fine tolerances on materials including Aluminium, Stainless Steel, Titanium, Inconel, and Bronze Produce batch sizes ranging from 5 to 100 components Read and interpret technical drawings to ensure components meet exacting specifications Maintain high standards of quality throughout production Communicate effectively with colleagues to ensure workflow efficiency Candidate Profile: Proven experience as a CNC Turner with live tooling experience Confident with Fanuc controls (essential) Familiarity with CMZ MillTurn lathes (desirable) CADCAM knowledge is an advantage but not essential A strong work ethic and ability to work unsupervised during late shifts Quality-focused with a high level of attention to detail Hours: Monday to Thursday, 4:00 PM 2:00 AM Up to £20p/hr (negotiable, dependant on experience) + 25% late shift premium Overtime paid at 1.5x standard rate Interested? If youre an experienced CNC Turner who enjoys working in a fast-paced, precision-led environmentand youre ready to take on a well-compensated late-shift rolethis is a fantastic opportunity to join a well-established and respected business. To apply or learn more, please contact our specialist recruitment team with your up-to-date CV. Bolt-On Personneland our clients are equal opportunity employers who seek to recruit and appoint the best available person for a job regardless of marital/civil partnership status, sex, age, religion, belief, race, nationality and ethnic or national origin, colour, sexual orientation or disability. Bolt-On Personnel and our clients apply all relevant Data Protection laws when processing your Personal Data. If you choose to apply to this opportunity and share your CV or other personal information with Bolt-On Personnel, these details will be held by us in accordance with our privacy policy used by our recruitment team to contact you regarding this or other relevant opportunities at Bolt-On Personnel. JBRP1_UKTJ
