105 jobs found

Metering Engineer Clearance required: BPSS Interview process: Tech IV Location: Remote with travel at set milestones. Leads site-level technical coordination for metering deployments Participates to site surveys (so will travel a lot at the beginning) and assessments as OT technical expert (instrumentation + IT/OT integration) Strong specialist in metering technologies, instrumentation, and automation Designs and validates connectivity architecture (PLCs, SCADA, gateways, PME) Oversees configuration, commissioning, and interface validation Ensures cybersecurity compliance with the support of the Cyber SME in the central team Drives robust coms integration Manages site-level documentation, change control, and testing Provides support to xxxx local teams Experience in L&S, sustainability solutions and especially Schneider PME & RA is a plus English speaker Reports to Project managers in each Cluster (by Geo) and the lead architect in the central technical team Detailed job description from the client We are seeking a highly skilled and motivated Technical Engineer to lead the design and deployment of industrial utilities metering solutions across xxxx sites. In this pivotal role, you will be responsible for conducting site assessments, selecting appropriate meters, designing installation plans, and integrating metering systems with OT/IT infrastructure. You will also ensure all solutions comply with international standards. By enabling precise monitoring of energy and resources, you will directly contribute to THE CLIENT's sustainability objectives and drive operational excellence. Key Responsibilities Perform on-site assessments to evaluate infrastructure and feasibility for installing electricity, gas, diesel, water, and wastewater meters, addressing mechanical, electrical, civil considerations, and challenges like complex or limited pipe runs and retrofits. Analyze engineering documentation including process flow diagrams, P&IDs, and electrical single-line diagrams to identify optimal meter technologies, sizes, and installation points. Provide recommendations for metering solutions that adhere to xxxx's standards, including the appropriate selection of meter type, accuracy class, and communication protocols, based on a thorough assessment and consideration of installation complexities, hazardous areas, fluid characteristics, and physical parameters. Design and implement meter connectivity architecture by integrating with PLCs, gateways, SCADA systems, and Schneider PME platforms. Collaborate with site engineering and OT/IT teams to define network requirements and ensure compliance with cybersecurity and OT boundary controls. Provide technical input to OEMs and installation contractors, supporting procurement and commissioning activities. Document 'as-is' and 'to-be' metering configurations, maintaining traceable records of design decisions and lessons learned. Skills and Experience Degree or equivalent in Electrical, Instrumentation, Automation or Control Engineering. Proven experience in industrial utilities metering (electricity, gas, steam, water, wastewater), ideally within pharmaceutical or process manufacturing environments. Strong understanding of flow measurement principles and metering technologies. Deep knowledge of communication protocols including Modbus TCP/RTU, Ethernet/IP, RS-485, and pulse/analog signals. Familiarity with PLCs, gateways, SCADA systems, and PME integration. Ability to interpret technical drawings and produce structured documentation. Excellent communication and stakeholder engagement skills. Training in Hazardous Area Equipment selection and installation fundamentals. Experience with global projects and working knowledge of both local and international standards (e.g. ATEX, CSA). Skilled in handling large datasets, particularly for energy data verification Expected Deliverables Site Assessment Reports with metering gap analysis. Recommended Meter Specifications and Connectivity Designs. Meter Layout Drawings, Maintenance and Calibration guide. Bill of Materials (BoM) for procurement with clear outline of scopes. Technical validation input for cost estimation and vendor quotations. JBRP1_UKTJ

As the software/PLC Programmer you will be responsible for developing and maintaining high-quality PLC-based control and monitoring software to support industrial and energy systems. The role ensures programmed solutions are reliable, safe and delivered inline with technical specifications, engineering standards, and customer requirements. Working closely with the engineering and control team, you will support the full life cycle of control systems, including design, testing, commissioning and operational troubleshooting whilst maintaining robust documentation and configuration control. Responsibilities: Design, develop, enhance, and test PLC-based control applications using CODESYS (IEC 61131-3 languages: ST, FBD, SFC, LD). Implement and debug logic for real-time systems, control panels, and industrial automation networks. Translate functional specifications into detailed, maintainable, and scalable program logic with an emphasis on safety. Integrate third-party hardware and protocols (e.g., Modbus TCP/RTU, CANopen, OPC UA, Ethernet/IP). Support Factory Acceptance Testing (FAT), Sit Acceptance Testing (SAT), and commissioning activities as required, Maintain accurate technical documentation, version control, and configuration backups in accordance with internal quality processes. Diagnose and resolve issues in live environments, supporting both local and remote troubleshooting. Collaborate with the wider team to deliver best-in-class monitoring solutions. You: Qualifications Appropriate Engineering qualification Experience Essential: 2+ years' experience with CODESYS or similar platforms (e.g., Siemens TIA Portal, Beckhoff TwinCAT, WAGO e!COCKPIT). Strong knowledge of IEC 61131-3 programming languages, especially Structured Text (ST). Proven experience developing logic for industrial automation or energy control systems. Familiarity with control system design principles (signal conditioning, interlocks, safety systems). Ability to read and interpret electrical schematics and P&IDs. Skilled in testing and debugging both simulated and live systems. Desirable: Experience with BESS, HVAC controls, or renewable energy systems. Knowledge of networking, routers, firewalls, and industrial communication protocols. Exposure to visualization/HMI platforms (e.g., CODESYS Visualization, Ignition, Wonderware). Experience with Linux-based embedded systems or RTOS. Hands-on experience with WAGO PLCs and edge computers. Knowledge of cloud computing and visualisation tools (e.g., Grafana) Please apply for immedite consideration At Adept Resourcing - Commercial & Engineering, we specialise in connecting companies with top talent that drives innovation, growth and success. With our industry expertise, extensive network and personalised approach, we're here to help you. JBRP1_UKTJ

Join a long-established, globally operating engineering company specialising in complex automation and process solutions for highly regulated industries. With decades of technical leadership and a strong focus on innovation, this organisation delivers bespoke systems to clients worldwide supporting everything from precision manufacturing to sustainable production. You ll be part of a collaborative, future-focused team where technical excellence, global exposure and continuous improvement are part of everyday work. Test Engineer £34k - £40k + Pension, Life Assurance, Annual Bonus West Midlands Ref: 24132 Test Engineer - The Role: Responsible for testing machinery in the company's factory in Warwickshire ready for acceptance testing by customers visiting the factory to approve the equipment. This could be a stand-alone machine or a complete high speed packaging line Both Electrical and Mechanical knowledge will be required for this role, and you should have a recognised qualifications/training in at least one of these disciplines. This companies range of machinery are fully automated, so you will need a good working knowledge of automation control. Pneumatics and PLC control systems highly advantageous, but not essential. Working with both internal colleagues and sharing interactions with external clients, good interpersonal skills and be a good communication skills are required Test Engineer - The Person: Ideally you will have worked in a similar position or at least have experience in setting and testing packaging or special purpose machinery in the pharmaceutical or food packaging industry Working within a small test department, you must be a problem solver and be able to work on their own initiative and be able to work to tight timelines The majority of the role will be carried out in the production facility on site, however for Engineers who enjoy overseas travel, this could be included in the role Located in West Midlands, this role would be commutable from Redditch, Stratford upon Avon, Bromsgrove, Evesham, Warwick and surrounding areas. Role would be suitable for Engineers with experience of control panel wiring, testing and installation. Ideal for a multi-skilled Field Service Engineer, seeking an in-house, static role. For further information call Sharon Hill

Control Systems EngineerLathom£50,000-£55,000 + 25 Days Holiday + Bank Holidays + Bonus Scheme + Up to 8% Pension + Training & Development Excellent opportunity for a Control Systems Engineer with PLC and SCADA experience to join an industry leader offering the chance to work on cutting-edge technology, contribute to global projects, and develop your skills within a highly technical R&D environment.This company are a global powerhouse in their field, known for world-class manufacturing, pioneering technology, and a long-standing reputation for innovation. Their R&D Process Control team plays a vital role in developing and rolling out advanced inspection and process control systems across international operations, forming a key part of their digitalisation and automation strategy.In this role you will work across the full lifecycle of process control systems - from concept through to implementation. You'll develop SCADA systems, program PLCs, create and enhance advanced control techniques (including PID, AI, and machine learning approaches), and support instrumentation and inspection tools used across global manufacturing sites. You'll collaborate with cross-functional R&D and production teams to drive process improvements, troubleshoot complex challenges, and support both on-site and remote operations. Some occasional overseas travel may be required.The ideal candidate will have experience in industrial process control, be strong with PLC and SCADA systems, and have a solid understanding of electrical/electronic principles. Candidates must have full right to work in the UK, be commutable to Lathom, and have excellent communication skills, strong problem-solving abilities, and good project/time management capabilities.This is a fantastic opportunity to join a highly technical R&D team working with global stakeholders, advance your skills with new technologies, and contribute directly to the development of next-generation control and inspection systems. The Role: Developing and enhancing process control systems from concept to implementation PLC programming, SCADA development, and advanced control techniques (including AI/ML) Delivering instrumentation and inspection solutions to support global operations Providing technical support, system upgrades, and occasional overseas travel The Person: Experience in industrial process control and PLC/SCADA systems Engineering Degree (2:1 or above preferred) Logical problem solver with strong communication skills Commutable to Lathom and full right to work in the UK Reference Number: BBBH265340 To apply for this role or to be considered for further roles, please click "Apply Now" or contact Tommy Williams at Rise Technical Recruitment.Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles.The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates.

Senior Control & Instrumentation Engineer Abingdon Rd, Culham, UK Full-time Salary: £56,596 (inclusive of Specialist Allowance) + excellent benefits including outstanding pension Division: Integrated Engineering Site Location: UKAEA Culham, Oxfordshire Confirmed Grade: Level 5 Department: Electrical Engineering Company Description By 2050, the planet could be using twice as much electricity compared to today. Are you interested in contributing and helping to shape the future of the worlds energy? If so, read on. Fusion, the process that powers the Sun and Stars, is one of the most promising options for generating the cleaner, carbon-free energy that our world badly needs. UKAEA leads the way in realising fusion energy, partnering with industry and research for groundbreaking advancements. Our goal is to bring fusion electricity to the grid, supported by tomorrow's power stations. In pursuit of our mission, UKAEA embraces core values: Innovative, Committed, Trusted, and Collaborative. As an employee of UKAEA, you will benefit from: - Outstanding defined benefit pension scheme, details of which can be found at the end of this advert. - Corporate bonus scheme up to 7% and a Relocation allowance (if eligible). - Flexible working options including family friendly policies and the right to request flexible working from the start of your employment. - Employee Assistance Programme and trained Mental Health First Aiders. - Generous annual leave allowance starting with 25 days, plus 3 days Christmas closure and 2.5 privilege days, in addition to UK bank holidays. - Wide range of career development opportunities. - A vibrant culture committed to equality and being fully inclusive. Job Description The salary for this role is £56,596 (inclusive of a Specialist Allowance). Onsite working is expected, however, we can also discuss hybrid working where possible, depending on business needs. This role is based at the following site: Culham, Oxfordshire. This role requires employees to complete an online Baseline Personnel Security Standard (BPSS), including The Disclosure & Barring Service (DBS) checks for criminal convictions and possibly a search of open source data. The Role Were looking for a Senior Control & Instrumentation (C&I) Engineer to join our team driving the future of fusion energy. In this exciting role, youll lead the design, development, and delivery of advanced control and safety systems that power some of the UKs most innovative and high-tech facilities. From initial concepts to commissioning, youll take full ownership of complex work packages, solving technical challenges, responding to plant faults, and ensuring robust, safe solutions. Youll also lead technical studies, produce key documentation, and oversee the work of staff and contractors on major installations and upgrades. In this role, you will use strong communication and influencing skills to collaborate with interdisciplinary teams and stakeholders, effectively manage your time and workload to meet targets, and independently identify and solve complex technical problems. If you're ready to make a real impact and apply your expertise in a fast-paced, high-tech, research-driven environment, wed love to hear from you. Apply now and be part of the future of clean energy. Key Accountabilities: - Lead and deliver C&I projects from concept to detailed design, including enhancement programmes and future fusion systems, ensuring timely, safe, and cost-effective execution. - Take technical ownership of multiple control and safety systems, covering installation, software development, testing, commissioning, and maintenance across UKAEA facilities. - Develop technical documentation and software, including system architecture, control philosophies, and coding in platforms such as Siemens TIA S7, PCS7, LabVIEW, ABB 800xA, Python, and C++. - Collaborate across disciplines to capture requirements, perform HAZOP assessments, chair design reviews, and guide solutions through the full lifecycle with end users and stakeholders. - Supervise teams and ensure compliance, overseeing contractors, authorising electrical work, managing project milestones, and maintaining adherence to safety, quality, and technical standards. Qualifications Essential: - A degree in Electrical/Electronic Engineering or equivalent, and relevant professional experience in an engineering role. Or HND in Electrical/Electronic discipline, or equivalent qualification level, with a greater breadth and depth of experience/knowledge. - Strong practical knowledge of PLC and SCADA systems, along with a solid understanding of EC&I documents such as SLDs, P&IDs, C&Es, and schematics. - Experienced in safe working practices and procedures, including preparing safety documentation like risk assessments, method statements, permits, and isolations. - Must demonstrate a high level of experience in the design, installation and testing of Control and Instrumentation software and hardware systems. Desirable: - Chartered Engineer status with a suitable professional institution. - Functional Safety qualifications (e.g. TV Rheinland FSEng). - Experience with Siemens, LabVIEW, ABB 800Xa or similar control system applications. - Experience working in a scientific / engineering environment following strict safety processes. - Supervisory experience. Additional Information For a full list of benefits and to apply, select the apply button to be taken through to the UKAEA careers pages. UKAEA's mission is clean energy for all, and we welcome talented people from all backgrounds who want to help us achieve our mission. We are under-represented from some groups and so want to encourage applications in particular from women in STEM, people from Black British Caribbean and African backgrounds and from Pakistani and Bangladeshi British backgrounds. Our Executive team, supported by our 'Head of Equality, Diversity and Inclusion' (EDI) and Wellbeing and our EDI Networks actively promote Inclusion and takes steps to increase diversity within our organisation. We reinforce best practices in recruitment and selection and evaluate approaches to remove barriers to success. UK Atomic Energy Authority is committed to being accessible. Please contact us if you have any questions or require help or adjustments to compete on a fair basis, for example, changes to the way we interview or share information. JBRP1_UKTJ

Metering Engineer Clearance required: BPSS Interview process: Tech IV Location: Remote with travel at set milestones. Leads site-level technical coordination for metering deployments Participates to site surveys (so will travel a lot at the beginning) and assessments as OT technical expert (instrumentation + IT/OT integration) Strong specialist in metering technologies, instrumentation, and automation Designs and validates connectivity architecture (PLCs, SCADA, gateways, PME) Oversees configuration, commissioning, and interface validation Ensures cybersecurity compliance with the support of the Cyber SME in the central team Drives robust coms integration Manages site-level documentation, change control, and testing Provides support to xxxx local teams Experience in L&S, sustainability solutions and especially Schneider PME & RA is a plus English speaker Reports to Project managers in each Cluster (by Geo) and the lead architect in the central technical team Detailed job description from the client We are seeking a highly skilled and motivated Technical Engineer to lead the design and deployment of industrial utilities metering solutions across xxxx sites. In this pivotal role, you will be responsible for conducting site assessments, selecting appropriate meters, designing installation plans, and integrating metering systems with OT/IT infrastructure. You will also ensure all solutions comply with international standards. By enabling precise monitoring of energy and resources, you will directly contribute to THE CLIENT's sustainability objectives and drive operational excellence. Key Responsibilities Perform on-site assessments to evaluate infrastructure and feasibility for installing electricity, gas, diesel, water, and wastewater meters, addressing mechanical, electrical, civil considerations, and challenges like complex or limited pipe runs and retrofits. Analyze engineering documentation including process flow diagrams, P&IDs, and electrical single-line diagrams to identify optimal meter technologies, sizes, and installation points. Provide recommendations for metering solutions that adhere to xxxx's standards, including the appropriate selection of meter type, accuracy class, and communication protocols, based on a thorough assessment and consideration of installation complexities, hazardous areas, fluid characteristics, and physical parameters. Design and implement meter connectivity architecture by integrating with PLCs, gateways, SCADA systems, and Schneider PME platforms. Collaborate with site engineering and OT/IT teams to define network requirements and ensure compliance with cybersecurity and OT boundary controls. Provide technical input to OEMs and installation contractors, supporting procurement and commissioning activities. Document "as-is" and "to-be" metering configurations, maintaining traceable records of design decisions and lessons learned. Skills and Experience Degree or equivalent in Electrical, Instrumentation, Automation or Control Engineering. Proven experience in industrial utilities metering (electricity, gas, steam, water, wastewater), ideally within pharmaceutical or process manufacturing environments. Strong understanding of flow measurement principles and metering technologies. Deep knowledge of communication protocols including Modbus TCP/RTU, Ethernet/IP, RS-485, and pulse/analog signals. Familiarity with PLCs, gateways, SCADA systems, and PME integration. Ability to interpret technical drawings and produce structured documentation. Excellent communication and stakeholder engagement skills. Training in Hazardous Area Equipment selection and installation fundamentals. Experience with global projects and working knowledge of both local and international standards (e.g. ATEX, CSA). Skilled in handling large datasets, particularly for energy data verification Expected Deliverables Site Assessment Reports with metering gap analysis. Recommended Meter Specifications and Connectivity Designs. Meter Layout Drawings, Maintenance and Calibration guide. Bill of Materials (BoM) for procurement with clear outline of scopes. Technical validation input for cost estimation and vendor quotations.

Junior Applications Engineer £30,000 - £35,000 Sandiacre Role Overview We are seeking a motivated engineer with an electrical / electromechanical engineering degree and up to 2 years' experience to join our team as a Laser Service & Applications Engineer. In this role you will split your time between: - Developing and improving laser cutting applications - Answering customer service calls and diagnosing problems remotely - Working in our factory to commission new laser machines and support production and process development - Gaining deep product knowledge across legacy and modern laser systems and helping advance our product line - Few times a month, visiting customer sites to repair, maintain and commission laser machines Key Responsibilities - Responsible for developing and improving laser cutting applications - Provide phone-based customer support: receive service calls, diagnose issues, guide customers, and determine when a field visit is required - When required, travel to customer sites to conduct on-site repairs, maintenance, upgrades and commissioning of laser equipment - Commission new machines in the factory: setup, calibration, acceptance testing, handover to production - Learn and document the differences between legacy laser systems and new-generation machines, their physical design, control systems and maintenance regimes - Collaborate with production and manufacturing teams to support process development for both current and future product lines - Actively contribute to product advancement through feedback, testing and continuous improvement initiatives - Interface with customers to understand their application needs and provide technical support and advice - Assist in developing installation, operation and maintenance procedures and technical documentation - Work with cross-functional teams (engineering, manufacturing, service, sales) to drive continuous improvement of service offerings and product usability Required Qualifications & Traits - Bachelor's degree in Electrical or Electrotechnical Engineering (or equivalent) - 0 to 2 years of relevant engineering experience - Strong problem-solving aptitude: you genuinely enjoy fixing things as a hobby, tinkering, taking machines apart and understanding them - Quick learner who enjoys solving problems and diving into machine systems - Comfortable speaking with customers: good interpersonal and communication skills, able to explain technical issues in an understandable way - Willingness to travel to customer sites and work in production environments - Enthusiasm for learning both the physical/mechanical side and the electrical / PLC side of laser systems Desired Traits - Proactive, curious and hands-on: you not only fix things in your free time, but you also want to be an "engineer" outside work too - Customer-friendly: you enjoy engaging with customers to understand their issues and help them resolve problems - Process-oriented mindset: you see opportunities to improve how machines are commissioned, maintained, or upgraded - A committed team player who works well across functions and shares knowledge Why Join Us? You will join a team where the service function is evolving and a strong product-knowledge engineer is needed. You will build deep expertise across a range of laser systems, from older machines in the field to the latest generation models in the factory. The mix of customer-facing service support, on-site field work and production commissioning gives you a varied and challenging role-ideal for someone who loves machines and solving things

As a global leader in label and packaging finishing systems, this organisation specialises in high-performance converting solutions for self-adhesive labels, shrink sleeves and flexible packaging. Through advanced print-finishing and automation technology, it supports product development, short-run production and large-scale manufacturing across packaging, logistics, pharmaceuticals and consumer goods. Renowned for precision engineering, bespoke system integration and outstanding service, the business continues to drive innovation in finishing automation and materials conversion; delivering reliable, high-quality solutions to customers worldwide. Lead Control Systems Engineer Competitive Salary + Healthcare Package, Company Pension Scheme 8% DIS, 33 days holiday including stats, Annual Bonus Yorkshire - With Hybrid Working. Ref: 25008 You will lead the Electrical Engineering and Software development of automated machines, ensuring the delivery of robust, compliant and high-quality automation solutions. Develop and maintain robust processes to ensure the timely release of all product definitions, including engineering models, drawings, BOMs and software. Collaborate closely with customers, suppliers and internal teams: Sales, Drawing Office, Manufacturing and Purchasing; to gather requirements and ensure on-time product releases. Lead the design and implementation of electrical and software solutions that meet customer specifications and performance expectations. Provide technical support and guidance to Production and Service teams on electrical and software-related issues. Implement and maintain management systems that ensure machinery complies with all relevant industry standards, legislation and regulatory requirements. The successful candidate will have experience coordinating or working within cross-functional teams, including software, electrical, manufacturing and service departments. They will be a confident communicator, highly organised, and committed to continuous improvement in all aspects of their work. A qualification in Electrical, Electronic or Control Systems Engineering (HNC/HND/Degree or equivalent). Proven experience working within automation, machinery or industrial engineering environments. Strong technical knowledge of PLC, HMI and motion control systems (e.g. Siemens, Allen Bradley, Beckhoff). An excellent understanding of electrical design, control panel layouts and systems integration principles. Experience managing engineering projects from concept through to delivery, ensuring compliance with relevant industry standards and safety regulations. An analytical, proactive mindset, with a strong commitment to continuous improvement and effective problem-solving. This is an exceptional opportunity to step into a pivotal leadership role. You will elevate your already strong automation design and development skills by leading a talented, close-knit team focused on the research and development of market-leading machinery for a truly global marketplace. With manufacturing facilities across Europe and a robust, forward-thinking strategy, this dynamic and resilient organisation is experiencing sustained growth, supported by a full order book. It s an ideal time to join a business with stability, ambition and a clear vision for continued innovation. For further information call Sharon Hill on: (phone number removed) or (phone number removed).

A leading multidisciplinary design and build contractor in the UK with over a century of industry experience are currently on the lookout for a Control Engineers to join a dynamic team and contribute to ongoing success in the Water, Power & Energy, Pharmaceutical, and Food and Beverage sectors. This company prides themselves on being at the forefront of value-added engineering. They have a strong track record of supporting blue-chip clients across various industries, with a cultivated culture that promotes personal development and ensures the safety of our employees. Control Engineers £40,000 - £50,000 + Private Healthcare, Overtime, Pension, Expenses Opportunities for personal development within a company culture that prioritises employee safety Staffordshire based role Ref: 23686 Control Engineer - The Role: Take charge of delivering automation projects to our clients, overseeing the entire project lifecycle from design documentation to commissioning and handover Work on complex control system projects Engage with multiple stakeholders, including SI and LV engineering delivery teams and client representatives Control Engineer - The Person: A minimum of 3 years of systems engineering experience Strong knowledge of safe working practices regarding electrical equipment Proficiency in PLC and HMI software development, using devices from at least two manufacturers such as Rockwell Automation, Siemens, Mitsubishi, or Schneider. Experience with various communication protocols and SCADA systems A positive, approachable attitude A full UK driving licence - 20-30% travel - UK only If you are a Control Engineer looking for a challenging role within a company that values its employees and offers excellent opportunities for personal and professional growth, we'd love to hear from you. Apply today and take the next step in your career Position is based in Stafford. For further information call Sharon Hill

We are looking for a highly skilled Senior Automation Engineer to lead complex automation projects, support continuous improvement across company operations, and provide senior-level expertise in PLC programming, control systems and machine safety. This is an excellent opportunity for an experienced engineer to take ownership of major automation initiatives within a growing organisation. Control & Automation Engineer £50-70k + Flexible Hours + Company Vehicle + Overtime East Yorkshire Ref- 24778 Lead the design, development, and optimisation of PLC-based automation systems Oversee the design, build, and maintenance of electrical control panels Produce, review, and approve electrical drawings using AutoCAD and/or EPLAN Interpret and troubleshoot electrical and panel schematics Provide technical leadership during machine build, installation, and commissioning Ensure full compliance with industrial, electrical, and machine safety standards Work with power systems and electrical system design Design, integrate, and support SCADA systems Support and optimise pneumatic systems and automation components Apply ATEX requirements and ensure safe working practices in hazardous areas Act as a senior point of contact for manufacturing support, including food and industrial environments Mentor junior engineers and support technical decision-making across teams Travel to customer sites as required (valid driving licence essential) Research and analyse customer requirements to identify effective control and automation solutions. Requirements: Strong, proven PLC programming experience Extensive experience in control panel design/build/maintenance Full driving licence Experience with power systems and electrical design Proficiency with AutoCAD and/or EPLAN Manufacturing environment experience (food industry beneficial) Demonstrated knowledge of industrial safety and machine safety SCADA system experience ATEX knowledge and hazardous area experience Strong understanding of pneumatic systems Excellent troubleshooting skills and the ability to lead complex technical projects For further information call Sharon Hill

Join this UK-based engineering company with a global footprint, specialising in bespoke automation and control systems across industries including manufacturing, utilities and infrastructure. With decades of experience and a global reach, the company has successfully designed and commissioned control systems throughout the UK and Europe. Benefits include exposure to international engineering challenges and professional development through hands-on technical work and training. A collaborative and skilled team environment awaits offering a strong focus on innovation and career growth. Control Systems Engineer £40-55k - Earn £60k + Pension + Expenses + Xmas Bonus + Site Uplifts West Midlands. Ref: 18723 Control Systems Engineer - The Role: Work on innovative projects across a number of sectors with current projects focusing on renewable energy, water treatment and hydrogen production. Work with a blue-chip client base. Full project control from functional designs, through to site commissioning. Design, documentation, development & testing of a variety of PLC & SCADA systems, predominantly with Siemens and Rockwell Site Commissioning to locations within the UK Worldwide project opportunities available Control Systems Engineer - The Person: Previous experience working within the Control Systems sector, preferably within the water, utilities & power generation industries Experience / exposure to PLC/SCADA packages. You will be trained in product specific packages: specification, design, programming, testing, documentation & commissioning Any understanding and practical experience of panel hardware/hardware interfaces or low voltage electrical skills to aid testing and commissioning is desirable but not essential Willingness to travel to customer sites Worldwide, as required on occasions Work with an experienced team supporting specialist technical areas of functional safety, cyber security or PCS7. This is an excellent opportunity for a flexible and keen Engineer looking to expand and diversify their experience Located in West Midlands, this role would be commutable from Worcester, Bromsgrove, Droitwich Spa, Halesowen, Stratford upon Avon, Kenilworth, Solihull, Cheltenham, Hereford, Malvern & Kidderminster. For further information call Sharon HIll

Metering Engineer Clearance required: BPSS Interview process: Tech IV Location: Remote with travel at set milestones. IR35 Status: PAYE via Umbrella company only Job Description: . Leads site-level technical coordination for metering deployments . Participates to site surveys (so will travel a lot at the beginning) and assessments as OT technical expert (instrumentation + IT/OT integration) . Strong specialist in metering technologies, instrumentation, and automation . Designs and validates connectivity architecture (PLCs, SCADA, gateways, PME) . Oversees configuration, commissioning, and interface validation . Ensures cybersecurity compliance with the support of the Cyber SME in the central team . Drives robust coms integration . Manages site-level documentation, change control, and testing . Provides support to xxxx local teams . Experience in L&S, sustainability solutions and especially Schneider PME & RA is a plus . English speaker . Reports to Project managers in each Cluster (by Geo) and the lead architect in the central technical team Detailed job description from the client We are seeking a highly skilled and motivated Technical Engineer to lead the design and deployment of industrial utilities metering solutions across xxxx sites. In this pivotal role, you will be responsible for conducting site assessments, selecting appropriate meters, designing installation plans, and integrating metering systems with OT/IT infrastructure. You will also ensure all solutions comply with international standards. By enabling precise monitoring of energy and resources, you will directly contribute to THE CLIENT's sustainability objectives and drive operational excellence. Key Responsibilities Perform on-site assessments to evaluate infrastructure and feasibility for installing electricity, gas, diesel, water, and wastewater meters, addressing mechanical, electrical, civil considerations, and challenges like complex or limited pipe runs and retrofits. Analyze engineering documentation including process flow diagrams, P&IDs, and electrical single-line diagrams to identify optimal meter technologies, sizes, and installation points. Provide recommendations for metering solutions that adhere to xxxx's standards, including the appropriate selection of meter type, accuracy class, and communication protocols, based on a thorough assessment and consideration of installation complexities, hazardous areas, fluid characteristics, and physical parameters. Design and implement meter connectivity architecture by integrating with PLCs, gateways, SCADA systems, and Schneider PME platforms. Collaborate with site engineering and OT/IT teams to define network requirements and ensure compliance with cybersecurity and OT boundary controls. Provide technical input to OEMs and installation contractors, supporting procurement and commissioning activities. Document as-is and to-be metering configurations, maintaining traceable records of design decisions and lessons learned. Skills and Experience Degree or equivalent in Electrical, Instrumentation, Automation or Control Engineering. Proven experience in industrial utilities metering (electricity, gas, steam, water, wastewater), ideally within pharmaceutical or process manufacturing environments. Strong understanding of flow measurement principles and metering technologies. Deep knowledge of communication protocols including Modbus TCP/RTU, Ethernet/IP, RS-485, and pulse/analog signals. Familiarity with PLCs, gateways, SCADA systems, and PME integration. Ability to interpret technical drawings and produce structured documentation. Excellent communication and stakeholder engagement skills. Training in Hazardous Area Equipment selection and installation fundamentals. Experience with global projects and working knowledge of both local and international standards (eg ATEX, CSA). Skilled in handling large datasets, particularly for energy data verification Expected Deliverables Site Assessment Reports with metering gap analysis. Recommended Meter Specifications and Connectivity Designs. Meter Layout Drawings, Maintenance and Calibration guide. Bill of Materials (BoM) for procurement with clear outline of scopes. Technical validation input for cost estimation and vendor quotations. Behavioral Competencies Aligned with xxxx's values and expectations, the ideal candidate will demonstrate: Integrity & Transparency: Upholding high ethical standards and communicating openly. Respect & Inclusion: Supporting colleagues and embracing diverse perspectives. Accountability: Taking ownership and delivering on commitments. Courage & Development: Seeking innovation, learning from feedback, and adapting to change. Teamwork: Collaborating effectively across functions to achieve shared goals.

Job Description Electrical Systems Engineer (C&I) Derby, Raynesway Rolls-Royce Submarines Full-time Permanent We're seeking a skilled Electrical Systems Engineer (C&I) to help us deliver high-integrity control systems that meet exacting performance and safety standards. You will work as an electrical systems engineer within our product development team, working with stakeholders to understand high level system requirements and refining these requirements to ensure they are of the correct level of maturity and detail for hardware, software and electronic product design. You will work closely with our product owners and development teams who use agile Scrum methods to develop high integrity software and FPGA based applications adopting the latest state-of-the-art toolsets. Training will be provided where required to equip you with the skills necessary to develop the requirements and system architecture essential for the protection and monitoring of a nuclear propulsion plant. Key Accountabilities: Specify product level requirements and work with our design teams and vendors to ensure these have been met Work as a control systems engineer within our product development team, working with stakeholders to understand high level system requirements and refining these requirements to ensure they are of the correct level of maturity and detail for hardware, software and electronic product design Work closely with our product owners and development teams who use agile Scrum methods to develop high integrity software and FPGA based applications adopting the latest state-of-the-art toolsets Manage the system requirements, including traceability, through the product maturity gates. Verify the final product design against the system design requirements Engage across the wider Rolls-Royce organisation to introduce learning and maintain a strong systems engineering capability. Contribute to the continuing improvement of the system development processes and product quality attending regular audits. Understand controls engineering technologies and be responsible for apportioning requirements to these. Work closely with Product Owners to specify product definitions against higher level system requirements. What we're looking for: Degree Qualified or equivalent in Electronics Engineering Discipline Strong background in Systems Engineering Proficiency in Requirements Capture and management (DOORS) Practical Experience with PLC Development and PFGA Technology Proven experience working in or with Agile/Scrum delivery models Awareness of safety-critical development constraints and relevant safety standards ((e.g. DO-178B/C, IEC60880, IEC61508) What we offer We offer excellent development opportunities, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. Your needs are as unique as you are. Hybrid working is a way in which our people can balance their time between the office, home, or another remote location. It's a locally managed and flexed informal discretionary arrangement. As a minimum we're all expected to attend the workplace for collaboration and other specific reasons, on average three days per week. Why Rolls-Royce? Rolls-Royce is one of the most enduring and iconic brands in the world and has been at the forefront of innovation for over a century. We design, build and service systems that provide critical power to customers where safety and reliability are paramount. We are proud to be a force for progress, powering, protecting and connecting people everywhere. We want to ensure that the excellence and ingenuity that has shaped our history continues into our future and we need people like you to come and join us on this journey. We'll provide an environment of caring and belonging where you can be yourself. An inclusive, innovative culture that invests in you, gives you access to an incredible breadth and depth of opportunities where you can grow your career and make a difference. We are an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives which are crucial to innovation and problem solving. We believe the more diverse perspectives we have, the more successful we'll be. By building a culture of caring and belonging, we give everyone who works here the opportunity to realise their full potential. You can learn more about our global Inclusion strategy at Our people Rolls-Royce Job Category Electrical and Electronics Posting Date 04 Sept 2025; 00:09 Posting End Date PandoLogic.

If you like variety and different things in your PLC Control Systems Engineering career, then this could be a good move for you. My client designs and builds clever and unique PLC HMI and Robotic systems, and every year brings a different set of applications, customers, machinery to design and problems to solve. And getting involved in each project gives you that variety, different work, different systems, different UK sites. You re an experienced PLC programmer (any PLC would be OK, but the usual Siemens, Allen Bradley, Omron, Schneider, Mitsubishi PLC software would be ideal). You ll design the PLC software for each project from scratch, AND THEN follow the project right through to commissioning the machinery and automated systems on the customers site (UK only) and finishing with a working machine performing on site. Seeing what began on paper actually working is a great feeling! You re probably based in Leicestershire, Northamptonshire, but some engineers travel in from Hinckley, Coventry, and down the M1 from Nottingham. Salary: Yes, you ll get a good salary, and yes you ll get holiday, pension and benefits, but also something money can't buy: the chance to really engineer something interesting. If you need that in 2026, talk to me. For further information , please send a copy of your CV to Mark Burnard at Hartland Recruitment Hartland Recruitment- a technical recruitment agency specialising in finding Engineers for the UK Automation, Process Control Systems and Machinery Manufacturers since 1990. Looking for your next job in Electrical, Mechanical Design, Service Commissioning Engineering, or PLC HMI SCADA control? Send me your CV. Regrettably there is no sponsorship for a UK work permit with this vacancy.

I am recruiting for a controls engineer based in the Slough area Main purpose of job: Development of new PLC control system designs and maintaining current software up to date using electrical schematics and Control Philosophy/FDS. Testing of electrical/electronic and control systems, producing detailed design, programming of Allen Bradley (AB) PLCs and HMIs. On site commissioning of special projects when required. Training will also be provided to enhance the software development skills. Main Responsibilities: Developing and maintaining our range of equipment using Allen Bradley PLCs Micro800, CompactLogix and associated HMIs by writing well-structured PLC/HMI code Creating function blocks in structured text and ladder logic, taking forward our intuitive HMI style across all our platforms Able to work with senior management and develop a clear to understand Control philosophy and when agreed a detailed FDS leading to clear concise software and maintain documentation An understanding of how to integrate the system into customer s overall control system using Ethernet and Modbus protocols Help troubleshoot issues with software and hardware in Test department when required Reporting, communicating and working with other departments as a team Planning, managing own projects and work packages Commissioning and start-up of larger special projects when service need assistance Provide Tier 3 software support to colleagues and customers when required Candidate Requirements: Bachelor s degree in Electrical and Electronic Engineering or Controls based qualification Be able to develop and design code for PLC and HMI Be able to read and understand electrical and control schematics Good project management and problem-solving skills Give ideas and new concepts to improve the products If this sounds of interest, please apply today.

Alexander Steele has partnered with a leading global food manufacturer that has an exciting opportunity for a Control & Automation specialist to join their Operational Technology (OT) team, and lead the control and automation systems infrastructure strategy for their UK factories. Your focus will be on obsolescence, security, new installations, hardware and software standards, and driving new OT solutions to deliver supply chain improvements. Key responsibilities Collaborate with cross-functional teams, including site engineering, projects, and manufacturing teams, to proactively manage the OT environment Provide Operational Technology support and project delivery across assigned factories in the UK. Liaise with maintenance technicians and project teams to support factory automation infrastructure. Document systems at respective factories and share knowledge with the wider team. Manage installations to ensure compliance with statutory regulations and group standards. Create and maintain a roadmap for systems development and technology obsolescence. Manage 3rd party contractors for project implementation and support purposes. Candidate Requirements Engineering qualification in relevant discipline such as Control & Automation, Mechatronics, Electronics, Electrical, Mechanical, Computer Science, Information Technology or equivalent. At least 5 years experience in a complex control and automation systems environment. Good technical knowledge and experience of controls and automation systems, including Siemens PLCs, WinCC SCADA, Iconics Genesis SCADA or Rockwell Logix platform. Good IT experience and technical knowledge of IP networking, Windows OS configuration, SQL Server management, OPC configuration, Active Directory, SCCM, Intune or Defender. On Offer: £55K to £60K + Car Allowance + 10% Bonus Pension + Private Healthcare 25 leave days + 8 bank holidays Homebased role (commuting 1 to 2 days a week to Liverpool based factory)

Job Title: Senior Control Systems Engineer Location: Cleator Moor, Cumbria Job ID: 39631 Salary: Salary negotiable depending on experience. Call to discuss Hours: Flexible working, core hours 10am-3pm and can start from 7am to suit with potential client site visits Contract/Permanent: Permanent Site Based/Office/Remote: Hybrid Start Date: ASAP Benefits: Salary negotiable depending on experience 25 days annual leave, 8 Bank Holidays, plus the ability to buy and sell up to 5 days per year Flexible start and finish times, including flexi-Fridays Competitive Employee Referral Award Scheme Private Medical Insurance Life Assurance Pension Payment of professional membership fees Healthy Extras - Employee Assistance Programme, access to a practicing GP, Confidential Advice Enhanced family friendly policies Senior Control System Engineer Job role: We are recruiting a permanent Senior Controls Systems Engineer to join our client, who is a leading force in digital transformation across the Nuclear, Energy, and Industrial sectors. With over 50 years of expertise, this organisation delivers smart, secure, and sustainable solutions across the UK, Europe, and North America. This is the ideal time for a Senior Control Systems Engineer to join the team. As a Senior Control Systems Engineer, you'll lead control system design and integration, mentor a growing team, and shape technical direction on high-impact projects. As a Senior Control Systems Engineer, you will: Design, development, programming and testing of mission critical innovative solutions under the guidance of more experienced Engineers. Work as a key team member resolving hardware and software challenges for assigned solution areas. Design and configuration of cyber-secure infrastructure and communications between solution components using industry standard protocols. Develop a thorough understanding of ITI's operational procedures and ensure compliance with both internal and external standards. Assembly supervision and electrical testing of solution hardware (including functional safety systems) under the guidance of experienced Engineers. Installation and commissioning of solutions on customer sites. Provide support and mentoring for more junior engineers. Experience & Knowledge Experience of control system project delivery, demonstrable experience of design, implementation, test and commissioning roles within a project team Basic understanding of electrical system drawings, including GA's, Wiring Schematics and Termination Diagrams. Good fundamental electrical knowledge and ability to understand/interpret system drawings Sound grasp of general IT/OT Technologies and development methodologies Awareness/understanding of Quality Management System procedures Knowledge of Windows Operating System configuration and lockdown. Knowledge of network switch and firewall configuration and network management packages Electrical & Electronic or Electrical or Software Engineering degree (min 2:1) or similar qualification Undertaken a structured project delivery lifecycle Experience with software development and configuration tools, methods and processes Experience with Siemens range of PLCs/HMIs / DCS / Drives Skills & Abilities Proficient in generation of formal technical documentation for the full life cycle of projects Proficient in Microsoft Office products Ability to estimating time and costs for common tasks Eligible for security clearance checks for access to client sites. Excellent ability to capture information, analyse it, and articulate an appropriate solution. Excellent verbal, written and interactive communication skills Able to operate "self-sufficiently" on customer's premises, including production locations. Can demonstrate the appropriate level of commercial awareness and diligence You have been sent this vacancy list by EC&I Partners. By clicking "accept", we will call you to discuss your current circumstancesand process your application. If you choose to"reject", please add a comment to help us understand why the role isn't for you. If you would like to talk to one of our consultants before making a decision, our phone number is (phone number removed). Please note our office hours are 9am-4pm Monday-Friday.

Control Systems Engineer West Bromwich 50,000 Monday to Friday (8am-4pm) Benefits:- 33 Days Holiday Company Pension Scheme Life Assurance We are looking for a Control Systems Engineer to join our manufacturing client in West Brom. They are a leading manufacturer, supplying bespoke solutions to their customers, which creates massive variety for this person. Role & Responsibilities: Working in a large engineering department of 40+ engineers, with electrical, mechanical and project engineering skillsets Responsible for all controls and instrumentation on site Design, specification and installation of control and safety systems (PLCs / BPCS / SIS / DCS / SCADA / HMI) PLC programming and modification of existing PLCs (Allen Bradley) Knowledge, Skills & Experience: Strong experience in configuration and programming of Allen Bradley PLCs Knowledge of BS / IEC 61508, 61511, 62443, 61003 standards Understanding of function safety, SIL, LOPA and safety instrumented systems Experience in an hazardous environment and understanding of ATEX regulations If you're interested apply now or contact Jacob at Hunter Selection for more information. If you are interested in this position please click 'apply'. Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors. Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.